EW780-9410-00DECT 6.0 Cordless telephone - Base Unit

Abridged user’s manual Scan the QR code for support information When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. CAUTION: Do not install the telephone base at a height above 2 meters. 5. Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or a swimming pool, or in a wet basement or shower. 6. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 7. Avoid placing the telephone system in places with extreme temperature, direct sunlight, or other electrical devices. Protect your phone from moisture, dust, corrosive liquids and fumes. 8. Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided. 9. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home or office, consult your dealer or local power company. 10. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on. 11. Never push objects of any kind into this product through the slots in the telephone base or handset because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 12. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 13. Do not overload wall outlets and extension cords. 14. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions: • When the power supply cord or plug is damaged or frayed. • If liquid has been spilled onto the product. • If the product has been exposed to rain or water. • If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation. • If the product has been dropped and the telephone base and/or handset has been damaged. • If the product exhibits a distinct change in performance. 15. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning. 16. Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the phone is located in an environment containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc. 17. Only put the handset of your telephone next to your ear when it is in normal talk mode. 18. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 19. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 20. CAUTION: Use only the batteries indicated in this manual. There may be a risk of explosion if a wrong type of battery is used for the handset. Use only the supplied rechargeable batteries or replacement batteries (BT262342) for the handset. Do not dispose of batteries in a fire. They may explode. Disposed of used batteries according to the instruction. • Do not use the battery in following conditions: »High or low extreme temperature during use, storage or transportation. »Replacement of a battery with an incorrect type that can defeat a safeguard. »Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. »Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. »A battery subjected to extremely low air pressure that can result in an explosion or the leakage of flammable liquid or gas. 21. Use only the adapter included with this product. Incorrect adapter polarity or voltage can seriously damage the product. 22. The applied nameplate is located at the bottom or near of the product. SAVE THESE INSTRUCTIONS Battery • Use only the battery provided or equivalent. To order a replacement, visit our website at www.vtechphones. com or call 1 (800) 595-9511. In Canada, go to phones. vtechcanada.com or call 1 (800) 267-7377. • Do not dispose of the battery in a fire. Check with local waste management codes for special disposal instructi…

Text truncated - open the document above for the full version.

Form: RFT-AMER-TCB-OP-19o Revision: 1 Page 1 of 1 Date: 1/25/2023 Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to section 2.911(d)(7) of the FCC rules To whom it may concern, This letter is to confirm both VTech Communications, Inc. (“Agent”) and VTech Telecommunications Ltd. (“Applicant”) acknowledge consent to obligations of each party pursuant to 47 CFR part §2.911(d)(7) of the FCC rules in regard to the agent for service of process. I Michael Tsui HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC & Intertek if there is any change in the status identified above. Applicant Company Name : VTech Telecommunications Ltd. Contact Name : Michael Tsui Address : 23/F, Tai Ping Industrial Centre, Block 1, 57 Ting Kok Rd, Tai Po, Hong Kong Telephone No : +852 2680 5398 Email : [email protected] Applicant FRN : 0015973951 Signature: ____________________________________ 17 February 2023 Date: ____________________________________ I Chris Conrad HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Agent. I consent to the obligation to accept service of process on behalf of the applicant in regard to all certification applications to the FCC submitted by above applicant and agree to immediately notify the FCC & Intertek if there is change in this representation. Agent Company Name : VTech Communications, Inc. Contact Name : Chris Conrad Address : 9020 SW Washington Square Road, Tigard OR 97223 Telephone No : +1(503) 596-1212 Email : [email protected] Agent FRN : 0033411265 Signature: ____________________________________ 17 February 2023 Date: ____________________________________

Form: RFT-AMER-TCB-OP-19n Revision: 1 Page 1 of 1 Date: 1/25/2023 Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and 47 CFR parts §2.903 and §2.911(d)(5)(ii) of the FCC rules Applicant: VTech Telecommunications Ltd. FCC ID: EW780-9410-00 To whom it may concern, VTech Telecommunications Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to 47 CFR part §2.903 of the FCC rules and does not originate directly or indirectly from any company named on the covered list located in the link above or any subsidiary or affiliate thereof. Applicant further certifies that, as of the date of the filing of the application, the Applicant is not identified on the Covered List as an entity producing “covered” equipment and is not a subsidiary or affiliate of any such entity pursuant to 47 CFR part §1.50002 and required by 47 CFR part §2.911(d)(5)(ii) of the FCC rules. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant and agree to immediately notify Intertek if there is any change in the status identified above. ______________________________ [Signature of authorized Proprietor, Partner or Authorized Officer] Mr. Michael Tsui Approbation Supervisor VTech Telecommunications Ltd. 3 March 2023

Appendix B1 Letter of Agency for FCC Certification Aug. 23, 2022 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Limited do hereby authorize Intertek Testing Services (Mr. Tim ST Lee/ Mr. Kenneth Wong/ Ms. Jess Tang) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Aug. 23, 2022 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: EW780-9410-00 Request is hereby submitted by VTech Telecommunications Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd. reserves the right to discern which parties can obtain access to these information: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description The rationale for request for confidentiality is as followings: This information represents intellectual property of VTech Telecommunications Ltd . and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

HS Model: CS6929 SN:XXXXXXXXXXXX Model: CS6929-15 SN:XXXXXXXXXXXX SN LABEL 20X10mm CAUTION Use Only Supplied Battery or Battery BT262342 Model: CS6929SN:XXXXXXXXXXXX FCC ID: EW780-9854-00 IC: 1135B-80940600 DC 6V CHARGER Use Only Supplied Adapter CORDLESS TELEPHONE VTech Customer Service 1-800-595-9511 www.vtechphones.com 4H20 Accessory DC 6V 400mA Model: CS6929-2 SN:XXXXXXXXXXXX Model: CS6929-26 SN:XXXXXXXXXXXX Model: CS6929-3 SN:XXXXXXXXXXXX Model: CS6929-4 SN:XXXXXXXXXXXX CS6929-X ENGRAVING FFILE Model: CS6929 S/N: XXXXXXXXXXXXXXXXXXXX Model: CS6929 S/N: XXXXXXXXXXXXXXXXXXXX Model: CS6929-15 S/N: XXXXXXXXXXXXXXXXXXXX Model: CS6929-2 S/N: XXXXXXXXXXXXXXXXXXXX Model: CS6929-3 S/N: XXXXXXXXXXXXXXXXXXXX Model: CS6929-4 S/N: XXXXXXXXXXXXXXXXXXXX Model: CS6929-26 S/N: XXXXXXXXXXXXXXXXXXXX SN LABEL 28X10mm 65.00 33.00 29.00 11.00 IC: 1135B-80941000 COMPLIES WITH 47 CFR PART 68 Reg. No.: US:EW7W401A80-941000 HVIN: 35-202034BS RINGER EQUIVALENCE: 0.1A USOC JACK: RJ11C/RJ11W THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. CORDLESS TELEPHONE DC 6V 400mA VTECH TELECOMMUNICATIONS LTD. MANUFACTURED IN CHINA 4H20 FCC ID : EW780-9410-00 HAC VTech Customer Service 1-800-595-9511 www.vtechphones.com TEL. LINE Use Only Supplied Adapter CI BS AA

INTERTEK TESTING SERVICES Internal Photos FCC ID: EW780-9410-00 IC: 1135B-80941000 INTERTEK TESTING SERVICES Internal Photos FCC ID: EW780-9410-00 IC: 1135B-80941000 INTERTEK TESTING SERVICES Internal Photos FCC ID: EW780-9410-00 IC: 1135B-80941000 INTERTEK TESTING SERVICES Internal Photos FCC ID: EW780-9410-00 IC: 1135B-80941000 INTERTEK TESTING SERVICES Internal Photos FCC ID: EW780-9410-00 IC: 1135B-80941000 INTERTEK TESTING SERVICES Internal Photos FCC ID: EW780-9410-00 IC: 1135B-80941000 INTERTEK TESTING SERVICES Internal Photos FCC ID: EW780-9410-00 IC: 1135B-80941000

INTERTEK TESTING SERVICES FCC ID: EW780-9410-00 RF exposure - 1 of 1 For Maximum Permissible Exposure (MPE) evaluation of the base unit, the maximum power density at 20 cm from this mobile transmitter shall be less than the General Population / Uncontrolled MPE limit in OET Bulletin 65 and meet the requirement listed in KDB447498. For the 1.9GHz Base Unit of tested model: CS6929-2, the measured powers among all the measured channels were within its production tolerance: +16 dBm (Minimum) and +21 dBm (Maximum).The antenna gain of CS6929-2 is 0 dBi = 1.00 (num gain) and its maximum source-based time-averaging duty factor is 25.0% (6/24 x100%). From these data and its operating configuration – Mobile device, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna can be calculated according to OET Bulletin 65 as follow: The Conducted Power = 21 dBm = 125.9 mW The Conducted Power source-based time-averaging output power = (125.9 * 0.250) mW = 31.47 mW The power density at 20cm = 31.47 *1.00/ 4πR 2 = 0.0063 mW cm -2 In the frequency range of 1,500 - 100,000MHz, the MPE limit is 1.0 mWcm -2 for general population and uncontrolled exposure. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structures and body of the user or nearby persons. The following RF exposure statement is proposed to be included in the user manual: “ FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the base unit at least 20cm from nearby persons.”

TEST REPORT 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong SAR, China. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 62 Report Number: 22080283HKG-001 VTech Telecommunications Ltd. Application For Original Grant of 47 CFR Part 15 Certification Single New of RSS-213 Issue 3 Equipment Certification Unlicensed Personal Communication Service Devices / 2 GHz License-exempt Personal Communications Service Devices (Base Unit) FCC ID: EW780-9410-00 IC: 1135B-80941000 Prepared and Checked by: Approved by: Signed on File Leung Chiu Kuen, Stanley Engineer Tang Kwan Mo, Jess Lead Engineer Date: March 14, 2023 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 22080283HKG-001 Page 2 of 62 GENERAL INFORMATION Grantee: VTech Telecommunications Ltd. Grantee Address: 23/F, Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong. Manufacturer Name: VTech (Dongguan) Telecommunications Limited Manufacturer Address: VTech Science Park, Xia Ling Bei Management Zone, Liaobu, Dongguan, Guangdong, China. FCC Specification Standard: FCC Part 15, October 1, 2021 Edition FCC ID: EW780-9410-00 FCC Model(s): CS6929, CS6929-15, CS6929-2, CS6929-26, CS6929-3, CS6929-4, CS692Z-XY IC Specification Standard: RSS-213 Issue 3, March 2015 RSS-Gen Issue 5 Amendment 2, February 2021 IC: 1135B-80941000 HVIN: 35-202034BS PMN: CS6929/CS6929-15/CS6929-2/CS6929-26/CS6929-3/CS6929-4 VTech Model(s): CS6929, CS6929-15, CS6929-2, CS6929-26, CS6929-3, CS6929-4 Type of EUT: Unlicensed Personal Communications Service Devices Description of EUT: DECT 6.0 Cordless Telephone - Base Unit Serial Number: 85-009406-047-100 Sample Receipt Date: August 05, 2022 Date of Test: August 05, 2022 to August 22, 2022 Report Date: March 14, 2023 Environmental Conditions: Temperature: +10 to 40°C Relative Humidity: 10 to 90% Conclusion: Test was conducted by client submitted sample. The submitted sample as received complied with the 47 CFR Part 15 / RSS-213 Issue 3 Certification. TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 22080283HKG-001 Page 3 of 62 TABLE OF CONTENTS 1.0 TEST RESULTS SUMMARY & STATEMENT OF COMPLIANCE .......................................... 4 1.1 Summary of Test Results ........................................................................................... 4 1.2 Statement of Compliance ......................................................................................... 5 2.0 GENERAL DESCRIPTION ................................................................................................ 6 2.1 Product Description .................................................................................................. 6 2.2 Technical Description ................................................................................................ 6 2.3 Test Methodology ..................................................................................................... 6 2.4 Test Facility ................................................................................................................ 6 3.0 SYSTEM TEST CONFIGURATION .................................................................................... 7 3.1 Justification ............................................................................................................... 7 3.2 Radiated Emission Test Setup ................................................................................... 8 3.3 AC Line Conducted Emission Test Setup ................................................................... 9 3.4 Conducted Emission Test Configuration ................................................................... 9 3.5 Conducted Monitoring and Operational Test Configuration ................................. 10 3.6 EUT Exercising Software.......................................................................................... 10 3.7 Details of EUT and Description of Accessories ....................................................... 11 3.8 Measurement Uncertainty...................................................................................... 11 4.0 MEASUREMENT RESULTS ........................................................................................... 12 4.1 Antenna Requirement ............................................................................................. 12 4.2 Digital Modulation Techniques ............................................................................... 12 4.3 Emission Bandwidth and Occupied Bandwidth ...................................................... 12 4.4 Directional Gain of the Antenna ............................................................................. 15 4.5 Peak Transmit Power .............................................................................................. 16 4.6 Powe…

Text truncated - open the document above for the full version.

VTech Telecommunications Ltd Aug 23, 2022 To whom it may concern, Declarations FCC ID: EW780-9410-00 IC: 1135B-80941000 I, the undersigned, hereby declare that 1. The device does not use the provisions of 47CFR 15.323 (c) (6), random waiting mechanism is not used in this system. 2. The provisions of 47CFR 15.323 (c) (10) and 47CFR 15.323 (c) (11) are not used to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. 3. Only the handset will act as the initiating device, which will initiate the establishment of the duplex connection. 4. The device complies with the provisions of 47CFR 15.319(f). The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude transmission of control and signaling information or use of repetitive codes used by certain digital technologies to complete frame or burst intervals. The following table explains the reaction of device in case of either absence of information to transmit or operational failure after a connection of its companion device is established. Circumstances Reaction of Base Unit 1 Switch-off companion device NA 2 On hook by companion device B 3 Remove power from companion device B 4 Switch-off device NA 5 On hook on device side NA 6 Remove power from device A A – Connection is terminated and, transmission ceases. B – Connection is terminated but device transmits control or signaling information. C – Connection is terminated but companion device transmits control or signaling information. NA – Not applicable represents the device does not contain a hook switch or a power off switch. ML – is a level specified by the manufacturer and is the maximum amount in dB by which the limiting threshold may exceed thermal noise for an EUT transmitting the maximum allowed power. 5. M L of handset unit declared by manufacturer is 30dBm. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

Model: CS6929 BS Antenna description:This monopole antenna is optimized and used in the Base unit. This antenna is directly soldered to the ANT0 RF output in the main PCB. Frequency: 1924.992 MHZ (the frequency with maximum gain) Vertical Horizontal -3.30 0.00 Antenna Gain (dBi) CS6929 BS ANT0 Radiation Pattern_XY Plane -35-30-25-20-15-10 -5 05 VerticalHorizontal CS6929 BS Antenna Dimensions in mm:

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: EW780-9410-00 IC: 1135B-80941000 Radiated Emission – Base Unit (VTPL power adaptor) Front View Rear View The EUT is placed at the center of turntable INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: EW780-9410-00 IC: 1135B-80941000 AC Conducted Emission (VTPL power adaptor) Front View Side View 1 INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: EW780-9410-00 IC: 1135B-80941000 AC Conducted Emission (VTPL adaptor) Side View 2