EW780-9480-00IP Camera

Connect the power adapter to the camera unit and a power supply not controlled by a wall switch. NOTES Check the Wi-Fi coverage of your router. Place the camera unit at a desired place. To maintain compliance with the FCC’s RF exposure guidelines, place the IP carmera at least 20cm from nearby persons. • • Set sound detection on/off: Take photo or record video Touch to take a snapshot of the current view. Touch the video icon on the right below the live view to switch to record video mode. Touch to record a video of the current view. Touch the camera icon will switch back to take photo mode. 1. 2. 3. 4. What’s in the box Your camera package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. 6. Tab to select the Wi-Fi network, and then tab Continue. 7. When you have successfully added the camera unit, tab View Live Camera to start viewing. TIP If connection fails, press the Pair button on the bottom of the camera unit for five seconds to reboot the camera, and then add the camera again. When the blue LED light starts blinking, press and hold the Pair button on the bottom of the camera unit for five seconds. NOTES The blue and red LED lights on the camera unit blink alternately when pairing. A “vtech connect“ user account can pair up to 20 IP cameras. 5. • • Motion detection You can set the motion detection and/or sound detection functions on. When the function is on, the camera will record a video when it captures movement or sound. Set motion detection on/off: Using the IP camera Camera live view Tab Continue. Then, tab Search for camera. 3. 4. Add camera Add IP Camera to your mobile app Login After you have downloaded “vtech connect“, create an account and then login. Add camera After powering up the camera unit, wait for a moment for it to warm up. Tab Add camera. 1. 2. Overview 1 – Light sensor 2 – Infrared LEDs Backup lights for night vision. 3 – Camera lens 4 – LED indicators 5 – Microphone 6 – Power jack • Congratulations on purchasing your new VTech product. Before using this telephone, please read Important safety instructions. This manual has instructions on how to set up, register and operate your new camera. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. 2.4GHz IP Wi-Fi Camera User’s manual Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news. VC921 Connect Connect the IP Camera NOTES Use only the camera power adapter supplied with this product. Make sure the electrical outlet is not controlled by a wall switch. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. Make sure the camera unit and the power adapter cord are out of reach of children. Make sure you have set up an IEEE 802.11n router (not included). • • • • 7 – Pair button User’s manual Adjusting the camera angles You can adjust the camera angles by panning or tilting the camera head. Night vision The IP camera has infrared LEDs that allow you to see the captured views clearly at night or in a dark room. When the IP camera detects low light levels, the infrared LEDs are switched on automatically. NOTE When the infrared LEDs are on, the image is in black and white. This is normal due to external light sources. Mises en garde Utilisez et entreposez le produit à une température entre 0 ̊ C (32 ̊F) et 40 ̊C (104 ̊ F). N’exposez pas cet appareil à des froids ou des chaleurs extrêmes, ainsi qu’à la lumière directe du soleil. Ne l’installez pas près d’une source de chauffage. D’autres produits électroniques peuvent causer des interférences auprès de votre caméra IP. Essayez d’installer votre caméra IP le plus loin possible de ces dispositifs électroniques : routeurs sans fil, radios, téléphones cellulaires, interphones, moniteurs de pièces, téléviseurs, ordinateurs personnels, appareils électriques de cuisine et téléphones sans fil. Stimulateurs cardiaques implantés dans l’organisme Les simulateurs cardiaques (ne s’applique qu’aux dispositifs numériques sans fil): L’organisme ‘Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a mené une évaluation pluridisciplinaire des interférences entre les téléphones sans fil portatifs et les stimulateurs cardiaques implantés dans l’organisme. Appuyée par l’Administration des aliments et drogues (FDA) des États-Unis, la firme WTR recommande aux médecins: Avis aux détenteurs de stimulateurs cardiaques Vous devriez maintenir les dispositifs sans fil à au moins six pouces du simulateur cardiaque. Ils ne doivent PAS placer le téléphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche. L’étude effectuée par l’organisme WRS n’a pas identifié de risque pour les détenteurs de simulateurs cardiaques causés par les gens qui utilisent dispositifs sans fil à proximité de ceux-ci. Champs électromagnétiques (EMF) Ce produit de VTech est conforme à toutes les normes se rapportant aux champs électromagnétiques (EMF) standard. Si vous le manipulez correctement en suivant les instructions de ce guide, son utilisation sera sécuritaire pendant de nombreuses années, selon les meilleures évidences scientifiques dont nous disposons aujourd’hui. 1. 2. 3. • • General product care To keep this product working well and looking good, follow these guidelines: Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). DO NOT expose it to direct sunlight or moisture. Avoid dropping the product or treating it roughly. Clean with a soft cloth. DO NOT immerse the camera unit in water and do not clean it under the tap. DO NOT use cleaning spray or liquid cleaners. Make sure the camera unit is dry before you connect it to the m…

Text truncated - open the document above for the full version.

VTech Telecommunications Ltd Appendix B1 Letter of Agency for FCC Certification August 26, 2014 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Ltd. do hereby authorize Intertek Testing Services (Mr. Ken Sit/ Mr. Melvin Nip) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd August 26, 2014 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: EW780-9480-00 Request is hereby submitted by VTech Telecommunications Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd. reserves the right to discern which parties can obtain access to these information: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description The rationale for request for confidentiality is as followings: This information represents intellectual property of VTech Telecommunications Ltd. and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

INTERTEK TESTING SERVICES External Photos FCC ID: EW780-9480-00 IC: 1135B-80948000 external photos - 1 of 1

VC921 Engraving VC921 Unit Use only Supplied Adapter DC 5V 1000mA www.vtechphones.com VTech Customer Service 1-800-595-9511 FCC ID: EW780-9480-00 IC: 1135B-80948000 MANUFACTURED IN CHINA LABEL SIZE: 28.4X19.4mm Recessed engraving Recessed engraving Model: VC921 S/N: XXXXXXXXXXXXXXXXXXXX WIFI MAC : AABBCCDDEEFF Model: VC921 S/N: XXXXXXXXXXXXXXXXXXXX WIFI MAC : AABBCCDDEEFF

INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9480-00 IC: 1135B-80948000 internal photos - 1 of 7 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9480-00 IC: 1135B-80948000 internal photos - 2 of 7 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9480-00 IC: 1135B-80948000 internal photos - 3 of 7 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9480-00 IC: 1135B-80948000 internal photos - 4 of 7 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9480-00 IC: 1135B-80948000 internal photos - 5 of 7 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9480-00 IC: 1135B-80948000 internal photos - 6 of 7 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9480-00 IC: 1135B-80948000 internal photos - 7 of 7

INTERTEK TESTING SERVICES FCC ID: EW780-9480-00 RF exposure info - 1 of 1 For Maximum Permissible Exposure (MPE) evaluation of the base unit, the maximum power density at 20 cm from this mobile transmitter shall be less than the General Population / Uncontrolled MPE limit in OET Bulletin 65 and meet the requirement listed in KDB447498. The setup and equipment setting were made in accordance with ANSI C63.17. The antenna of EUT transmitter was replaced by a coaxial cable. The impendence matching of connection, cable loss and external RF attenuator are taken into account. The EUT was arranged to communicate via a fixed carrier frequency between its transmitter and a companion device. The transmission was configured in burst mode with pseudo-random data as typical as normal operation. For the 2.4GHz IP CAM of tested model: VC921, the measured powers among all the measured channels were within its production tolerance: +15 dBm (Minimum) and +19 dBm (Maximum).The antenna gain of VC921 is 0 dBi = 1.00 (num gain) and its maximum source- based time-averaging duty factor is 100.0%. From these data and its operating configuration – Mobile device, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna can be calculated according to OET Bulletin 65 as follow: The Conducted Power = 19 dBm = 79.4 mW The Conducted Power source-based time-averaging output power = (79.4 * 1.000) mW = 79.43 mW The power density at 20cm = 79.43 *1.00/ 4πR 2 = 0.0158 mW cm -2 In the frequency range of 1,500 - 100,000MHz, the MPE limit is 1.0 mWcm -2 for general population and uncontrolled exposure. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structures and body of the user or nearby persons. The following RF exposure statement is proposed to be included in the user manual: “ FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the base unit at least 20cm from nearby persons.” EUT Spectrum Analyzer Companion Device Directional Coupler

lssuing Laboratory: lntertek Testing Services Hong Kong Limited I HKAS has sccred¡ted this laboratory (HOKLAS 005 - TEST) und6r HOKLAS for specifìc laboratory act¡vities as list€d ¡n the HOKLAS directory of accr€dlted laborator¡es. TEST REPORT Report Number: 14081 065HKG-001 Application for Original Grant of 47 CFR Part 15 Certification Single New of RSS-210 lssue I Equipment Certification lP Camera FGC lD: EW780-9480-00 IC: 11358-80948000 Prepared and Checked by: Yeung Yung Fai, James Engineer lntertek's standard Terms and Conditions can be obtained at our website: http://www.intertek.com/terms/. This report shall not be reproduced, except in full. This report is for the exclusive use of lntertek's Client and is provided pursuant to the agreem9nt between lntertek and its Client. lntertek's responsibility and liability are limitod to the terms and conditions of the agreement. lntortek assumes no liability to any party, other than to the Cl¡ent in accordance with the agreement, for any loss, expense or damage occasloned by the use of this report. Only the Cl¡ent is authorized to permit copying or distribution of this report and then only in its entlrety. Any use of the lntert€k name or one of ¡ts marks for the sale or advert¡sem€nt of the tested material, product or service must f¡rst be approved in writing by lntertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, producl, or service is or has ever been under an lntertek certif¡cation program. lntertek Testing Services Hong Kong Ltd. 2/F., Garment Cânlre, 576 Castl€ Peak Roâd, Kowloon, Hong Kong Tel: (852) 2173 8808 Fax: (852) 2785 5487 Webs¡lo: www.hk.inl€rtek-ollsemko com Approved by: October 08,20'14 Hung, Terry Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Test Report Number: 14081065HKG-001 Page 1 of 91 FCC ID: EW780-9480-00 IC: 1135B-80948000 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com GENERAL INFORMATION Applicant Name: VTech Telecommunications Ltd. Applicant Address: 23/F., Tai Ping Industrial Center, Block 1, 57 Ting Kok Road, Tai Po, N.T., Hong Kong. FCC Specification Standard: FCC Part 15, October 1, 2012 Edition FCC ID: EW780-9480-00 FCC Model(s): VC921 IC Specification Standard: RSS-210 Issue 8, December 2010 RSS-Gen Issue 3, December 2010 IC: 1135B-80948000 IC Model(s): VC921 Type of EUT: Digital Transmission System Description of EUT: IP Camera Serial Number: N/A Sample Receipt Date: August 27, 2014 Date of Test: September 01, 2014 to September 19, 2014 Report Date: October 08, 2014 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Test Report Number: 14081065HKG-001 Page 2 of 91 FCC ID: EW780-9480-00 IC: 1135B-80948000 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1.0 Summary of Test Results.......................................................................................... 4 1.1 Statement of Compliance .......................................................................................... 4 2.0 General Description................................................................................................... 6 2.1 Product Description ................................................................................................... 6 2.2 Test Methodology...................................................................................................... 7 2.3 Test Facility ...............................................................................................................7 3.0 System Test Configuration........................................................................................ 9 3.1 Justification ...............................................................................................................9 3.2 EUT Exercising Software ........................................................................................ 10 3.3 Details of EUT and Description of Accessories ....................................................... 11 3.4 Measurement Uncertainty ....................................................................................... 11 4.0 Test Results.............................................................................................................. 13 4.1 Occupied bandwidth................................................................................................ 13 4.2 Maximum Conducted Output Power at Antenna Terminals ..................................... 22 4.3 Minimum 6dB RF Bandwidth................................................................................... 32 4.4 Maximum Power Spectral Density........................................................................... 42 4.5 Out of Band Conducted Emissions.......................................................................... 51 4.6 Field Strength Calculation ....................................................................................... 72 4.7 Transmitter Radiated Emissions in Restricted Bands and Spurious Emissions ....... 73 4.7.1 Radiated Emission Configuration Photograph ...................................................... 73 4.7.2 Radiated Emission Data....................................................................................... 73 4.7.3 Transmitte…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Transmission FCC ID: EW780-9480-00 IC: 1135B-80948000 config photos (radiated emission - base unit) - 1 of 1 Radiated Emission - Base Unit Front View Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Transmission FCC ID: EW780-9480-00 IC: 1135B-80948000 config photos (conducted emission) - 1 of 3 Conducted Emission Front View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Transmission FCC ID: EW780-9480-00 IC: 1135B-80948000 config photos (conducted emission) - 2 of 3 Conducted Emission Right Side View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Transmission FCC ID: EW780-9480-00 IC: 1135B-80948000 config photos (conducted emission) - 3 of 3 Conducted Emission Left Side View