EW780-9648-001.9GHz DECT Cordless Phone with Garage sensor / Contact Sensor

Abridged User’s manual VC7151 VC7151-101 VC7151-109 VC7152-201 VC7152-301 Wireless Monitoring System with Cordless Telephone Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news. BC $POHSBUVMBUJPOT on purchasing your new VTech product. Before using this product, please read *NQPSUBOU
TBGFUZ
JOTUSVDUJPOT. This abridged user’s manual provides you with basic operational instructions. A limited set of features are described in abbreviated form. For installation instructions, please refer to the *OTUBMMBUJPO
(VJEF. Please refer to the online User’s manual for a full set of installation and operation instructions at XXXWUFDIQIPOFTDPN. In Canada, visit XXXWUFDIDBOBEBDPN. Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. T Compatible with Hearing Aid T-Coil TIA-1083 3FHJTUFS
POMJOF
UP
HFU
BO
BEEJUJPOBM
NPOUI
XBSSBOUZ 7JTJU
XXXWUFDIQIPOFTDPN 3FHJTUSBUJPO Register your product online for enhanced warranty support. 1SPEVDU
OFXT Learn about the latest VTech products. *OUSPEVDUJPO
  8IBUmT
JO
UIF
CPY  0WFSWJFX
  Handset overview ..................... 5 Telephone base overview ......... 9 Garage door status sensor overview .............................. 13 Open/closed sensor overview ...14 Sensor unit overview .............. 14 Display icons overview ........... 15 Lights overview ....................... 17 )BOETFU
CBUUFSZ
  #FGPSF
VTF
  Set date and time ................... 20 Set answering system through voice guide ............. 20 Check for dial tone .................. 21 Operating range ...................... 21 4FOTPS
  Access an individual sensor menu ................................... 23 Set alert schedule as always on ........................................ 24 Set a time range for alerts ...... 25 Turn off the alert ..................... 26 Rename the sensor ................ 26 Sensor mode .......................... 27 Sensor alerts type .................. 29 Sensor log .............................. 30 Test sensor signal strength .... 31 $POGJHVSF
ZPVS

UFMFQIPOF
  Using the handset menu ......... 32 Set language .......................... 32 Temporary tone dialing ........... 33 Quiet mode ............................. 33 Caller ID announce ................. 34 Use caller ID to automatically set date and time ................ 34 5FMFQIPOF
PQFSBUJPOT
  Make a call ............................. 35 Answer a call .......................... 35 End a call ................................ 35 Handset speakerphone .......... 35 Volume .................................... 36 Mute ........................................ 36 Call waiting ............................. 36 Find handset ........................... 37 Redial list ............................... 37 Join a call in progress ............. 38 Push-to-talk (PTT) .................. 38 Intercom .................................. 39 Transfer a call ......................... 39 Answer an incoming call during an intercom call ........ 39 1IPOFCPPL
  Add a phonebook entry .......... 40 Review and dial from the phonebook .......................... 41 Edit a phonebook entry .......... 41 Delete a phonebook entry ...... 41 $BMMFS
*%
  Caller ID log ............................ 42 5BCMF
PG
$POUFOUT Save a caller ID log entry to the phonebook .................... 43 Delete a caller ID log entry ..... 43 Delete all caller ID log entries ...43 $BMM
CMPDL
  Block unknown calls ............... 44 Add a call block list entry ........ 44 Review the call block list ......... 45 Edit a call block list entry ........ 45 Save a caller ID log entry to call block list ........................ 45 Delete a call block list entry .... 45 Key tone .................................. 46 Ringer tone ............................. 46 Ringer volume ........................ 47 Temporary ringer silencing ..... 47 "CPVU
UIF
CVJMUJO
BOTXFSJOH
TZTUFN
BOE
WPJDFNBJM
TFSWJDF
  4FU
ZPVS
CVJMUJO

BOTXFSJOH
TZTUFN
  Turn the answering system on or off ............................... 49 Default announcement ........... 50 Record your own announcement .................... 50 Play the announcement .......... 50 Reset the announcement ....... 51 Set number of rings ................ 51 Message alert tone ................. 52 Recording time ....................... 52 Voice guide ............................. 53 6TF
ZPVS
CVJMUJO

BOTXFSJOH
TZTUFN
  New message indication ......... 53 Message playback .................. 54 Delete all old messages ......... 55 Call intercept ........................... 55 3FNPUF
BDDFTT

  Listen to messages from remote access ..................... 57 Change sensor mode from remote access ..................... 58 Remote access code .............. 58 6TF
UIF
CVJMUJO

BOTXFSJOH
TZTUFN
BOE
WPJDFNBJM
TFSWJDF
  3FUSJFWF
WPJDFNBJM
GSPN
UFMFQIPOF
TFSWJDF
  Retrieve voicemail .................. 60 Set your voicemail number ..... 60 Turn off the new voicemail indicators ............................. 61 &YQBOE
ZPVS
UFMFQIPOF
TZTUFN
  &$0
NPEF
  (FOFSBM
QSPEVDU
DBSF
  4UPSBHF
  'SFRVFOUMZ
BTLFE

RVFTUJPOT
  -JNJUFE
8BSSBOUZ
  5FDIOJDBM
4QFDJGJDBUJPOT
 %JTDMBJNFS
  1 *OUSPEVDUJPO This Wireless Monitoring System with VTech ULE consists of the telephone system, garage door status sensor, open/closed sensor, an…

Text truncated - open the document above for the full version.

Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or a swimming pool, or in a wet basement or shower. 5. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 6. Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided. 7. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home or office, consult your dealer or local power company. 8. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on. 9. Never push objects of any kind into this product through the slots in the telephone base or handset because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 10. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 11. Do not overload wall outlets and extension cords. 12. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions: • When the power supply cord or plug is damaged or frayed. • If liquid has been spilled onto the product. • If the product has been exposed to rain or water. • If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation. • If the product has been dropped and the telephone base and/or handset has been damaged. • If the product exhibits a distinct change in performance. 13. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the phone is located in an environment containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc. 15. Only put the handset of your telephone next to your ear when it is in normal talk mode. 16. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. SAVE THESE INSTRUCTIONS Battery • CAUTION: Use Only Supplied Battery. • Do not dispose of the battery in a fire. Check with local waste management codes for special disposal instructions. • Do not open or mutilate the battery. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. • Exercise care in handling batteries in order not to create a short circuit with conductive materials. • Charge the battery provided with this product only in accordance with the instructions and limitations specified in this manual. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that: Pacemaker patients • Should keep wireless telephones at least six inches from the pacemaker. • Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON. • Should use the wireless telephone at the ear opposite the pacemaker. WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones. For C-UL compliance only Mesures de sécurité importantes Afin de réduire les risques d’incendie, de blessures corporelles ou d’électrocution, suivez toujours ces mesures préventives de base lorsque vous utilisez votre téléphone : 1. Lisez et comprenez bien toutes les instructions. 2. Observez toutes les instructions et mises en garde inscrites sur l’appareil. 3. Débranchez ce téléphone de la prise murale avant de le nettoyer. N’utilisez pas de nettoyeurs liquides ni en aérosol. N’utilisez qu’un chiffon doux et légèrement humecté. 4…

Text truncated - open the document above for the full version.

VTech Telecommunications Ltd Appendix B1 Letter of Agency for FCC Certification September 22, 2014 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Ltd. do hereby authorize Intertek Testing Services (Mr. Ken Sit/ Mr. Melvin Nip) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd September 22, 2014 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: EW780-9648-00 Request is hereby submitted by VTech Telecommunications Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd. reserves the right to discern which parties can obtain access to these information:  Schematics  Detailed Block diagrams  Detailed Operational/Functional Description The rationale for request for confidentiality is as followings: This information represents intellectual property of VTech Telecommunications Ltd. and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd September 22, 2014 To whom it may concern, Label Location Justification FCC ID: EW780-9648-00 Request is hereby submitted by VTech Telecommunications Ltd. to request an alternative method of positively identifying the equipment, pursuant to 47 CFR § 2.925(f) of the FCC Rules. The FCC identifier for Handset will be placed in the battery compartment and the following requirements are confirmed to meet: a) The FCC identifier will visible at the time of purchase, by either of the following approaches:  Marketing the device without the battery installed, or  Providing instruction (stated on the box, user manual or additional documentation) directing the user as to where to find the FCC label. b) The user accessible area will not require any special tools for access and the FCC label will not be placed on a removable part. The user manual has already included the FCC statements, pursuant to 47 CFR § 15.19(a)(3), 15.21 and 15.105(b). If you have questions or need further information, please contact the undersigned. Sincerely, Michael Tsui Approbation Supervisor

INTERTEK TESTING SERVICES External Photos FCC ID: EW780-9648-00 IC: 1135B-80964800 INTERTEK TESTING SERVICES External Photos FCC ID: EW780-9648-00 IC: 1135B-80964800 INTERTEK TESTING SERVICES External Photos FCC ID: EW780-9648-00 IC: 1135B-80964800

Charger Model: VC7151 S/N: XXXXXXXXXXXXXXXXXXXX SN Label 28X10mm PC sheet 29mm 86mm 20.5mm 10.5mm 42mm 11mm 10.5mm 28.5mm 14.5mm 50mm 22mm 7.5mm 18mm 36mm CORDLESS TELEPHONE VTECH TELECOMMUNICATIONS LTD. MANUFACTURED IN CHINA THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE; AND 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. COMPLIES WITH 47 CFR PART 68 REGISTRATION NO.: US:EW7W401B80-964800 RINGER EQUIVALENCE:0.1 B HAC USOC JACK: RJ11C/RJ11W VTech Customer Service 1-800-595-9511 www.vtechphones.com IC: 1135B-80964800 FCC ID: EW780-9648-00 Model: VC7151SN: XXXXXXXXXXX CAUTION MISE EN GARDE Use Only Supplied Battery or Battery BT283342 N’utilisez que les piles fournis ou batterie de remplacement modèle BT 283342 FCC ID: EW780-9648-00 IC: 1135B-80964800 CAUTION MISE EN GARDE Use Only Supplied Battery or Battery BT283342 N’utilisez que les piles fournis ou batterie de remplacement modèle BT 283342 FCC ID: EW780-9648-00 IC: 1135B-80964800 BASE Handset Model: VC7100 S/N: XXXXXXXXXXXXXXXXXXXX Model: VC7100 S/N: XXXXXXXXXXXXXXXXXXXX 22mm 15mm DC 6V 600mA Model: VC7151 S/N: XXXXXXXXXXXXXXXXXXXX Model: VC7151-101 S/N: XXXXXXXXXXXXXXXXXXXX Model: VC7151-102 S/N: XXXXXXXXXXXXXXXXXXXX Model: VC7152-201 S/N: XXXXXXXXXXXXXXXXXXXX Model: VC7152-301 S/N: XXXXXXXXXXXXXXXXXXXX Model: VC7151-109 S/N: XXXXXXXXXXXXXXXXXXXX SN Label 28X10mm SN Label 20X10mm Model: VC7151 SN: XXXXXXXXXXX Model: VC7151-101 SN: XXXXXXXXXXX Model: VC7152-201 SN: XXXXXXXXXXX Model: VC7152-301 SN: XXXXXXXXXXX Model: VC7151-109 SN: XXXXXXXXXXX Model: VC7151-102 SN: XXXXXXXXXXX Model: VC7100 SN: XXXXXXXXXXX

INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9648-00 IC: 1135B-80964800 Base Unit INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9648-00 IC: 1135B-80964800 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9648-00 IC: 1135B-80964800 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9648-00 IC: 1135B-80964800 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9648-00 IC: 1135B-80964800 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9648-00 IC: 1135B-80964800 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9648-00 IC: 1135B-80964800 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9648-00 IC: 1135B-80964800 Handset INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9648-00 IC: 1135B-80964800 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9648-00 IC: 1135B-80964800

Report No.: 14090656HKG-001 Page 1 of 76 - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Specific Absorption Rate (SAR) Evaluation Report For DECT 6.0 Cordless Phone Handset Unit Model Number: VC7151 Brand Name: vtech FCC ID: EW780-9648-00 Test Report: 14090656HKG-001 Date of Report: 03 December, 2014 Prepared for VTech Telecommunications Ltd. 23/F, Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong Prepared and Checked by: Approved by: Chan Chun Foo, Bike Senior Lead Engineer Date: 03 December, 2014 Nip Ming Fung, Melvin Assistant Manager Date: 03 December, 2014 Report No.: 14090656HKG-001 Page 2 of 76 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1 Test Result Summary.................................................................................................. 3 2 General Information..................................................................................................... 4 3 Measurement System Description and Procedure ...................................................... 6 4 Tissue Verificaiton ..................................................................................................... 14 5 SAR Measurement System Verification .................................................................... 15 6 SAR Evaluation ......................................................................................................... 17 7 Test Insturments........................................................................................................ 22 8 Measurement Uncertainty .......................................................................................... 23 9 E-Field Probe and Dipole Antenna Calibration ........................................................... 23 10 References ............................................................................................................... 23 APPENDIX A – System Verification Data...................................................................... 24 APPENDIX B – SAR Evaluation Data ........................................................................... 25 APPENDIX C – E-Field Probe and Dipole Antenna Calibration .................................... 53 APPENDIX D – SAR Tissue Specification .................................................................... 75 APPENDIX E – SAR System Validation........................................................................ 76 Report No.: 14090656HKG-001 Page 3 of 76 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com 1. Test Result Summary The maximum spatial peak SAR value for the sample device averaged over 1g was found to be: Highest Reported SAR Band Operating Mode TX Frequency (MHz) 1 g Head 1g Body-Worn 1.9GHz DECT Voice 1921.536 – 1928.448 0.079 W/kg N/A This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment / general population exposure limits specified in ANSI/IEEE C95.1. Applicant : VTech Telecommunications Ltd. Applicant Address : 23/F, Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong. Model : VC7151 Brand Name : vtech EUT Description : DECT 6.0 Cordless Phone Handset Unit Exposure Category : General Population/Uncontrolled Exposure Test Device : Production Unit Date of Sample Received : 16 September, 2014 Date of Test : 26 September, 2014 Date of Report : 03 December, 2014 Place of Testing : Intertek Testing Services Hong Kong 5/F, Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong Temperature: +20 to 25°C Environmental Conidtions : Humidity 30 to 70% Test Specification : ANSI/IEEE C95.1: 1992 IEEE Std 1528: 2003 IEEE Std 1528a: 2005 FCC KDB Publication 447498 D01 v05r02 FCC KDB Publication 865664 D01 v01r03 FCC KDB Publication 865664 D02 v01r01 FCC KDB Publication 648474 D04 v01r02 Report No.: 14090656HKG-001 Page 4 of 76 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com 2. General Information 2.1. Description of Equipment under test (EUT) *Note: 1. DECT has a TDD/TDMA frame structure with a complete frame of 10ms duration with 24 time slots. And under these 24 time slots, the first 12 slots are allocated for the transmission from base station to handsets, and the other 12 slots are for the transmission from handsets to base station. During a call, the handset of this product will use one of 24 time slots to transmit under worst case, …

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES FCC ID: EW780-9648-00 Page of 2 1 Left Cheek Left Tilt INTERTEK TESTING SERVICES FCC ID: EW780-9648-00 Page of 2 2 Right Cheek Right T ilt

INTERTEK TESTING SERVICES FCC ID: EW780-9648-00 Page 1 of 6 EUT Photo Figure 1 – Handset Unit front view Figure 2 – Handset Unit back view INTERTEK TESTING SERVICES FCC ID: EW780-9648-00 Page 2 of 6 Figure 3 – 2.4V 400mAh Ni-MH Corun rechargeable battery front view Figure 4 – 2.4V 300mAh Ni-MH Corun rechargeable battery back view INTERTEK TESTING SERVICES FCC ID: EW780-9648-00 Page 3 of 6 Figure 5 – 2.4V 400mAh Ni-MH GPI rechargeable battery front view Figure 6 – 2.4V 400mAh Ni-MH GPI rechargeable battery back view INTERTEK TESTING SERVICES FCC ID: EW780-9648-00 Page 4 of 6 Figure 7 – 2.4V 400mAh Ni-MH Wewin rechargeable battery front view Figure 8 – 2.4V 400mAh Ni-MH Wewin rechargeable battery back view INTERTEK TESTING SERVICES FCC ID: EW780-9648-00 Page 5 of 6 Figure 9 – 2.4V 400mAh Ni-MH Sanik rechargeable battery front view Figure 10 – 2.4V 400mAh Ni-MH Sanik rechargeable battery back view INTERTEK TESTING SERVICES FCC ID: EW780-9648-00 Page 6 of 6 Figure 11 – 2.4V 400mAh Ni-MH Coslight rechargeable battery front view Figure 12 – 2.4V 400mAh Ni-MH Coslight rechargeable battery back view

- Intertek’s standard Terms and Conditions can be obtained at our website: http://www.intertek.com/terms/. - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report Number: 14090592HKG-002 Application For Original Grant of 47 CFR Part 15 Certification New Family of RSS-213 Issue 3 Equipment Certification Unlicensed Personal Communication Service Devices/ 2 GHz License-exempt Personal Communications Service Devices FCC ID: EW780-9648-00 IC: 1135B-80964800 Prepared and Checked by: Approved by: Signed on File Leung Chiu Kuen, Stanley Nip Ming Fung, Melvin Engineer Assistant Manager April 02, 2015 INTERTEK TESTING SERVICES Test Report Number: 14090592HKG-002 Page 1 of 79 FCC ID: EW780-9648-00 IC: 1135B-80964800 GENERAL INFORMATION Applicant Name: VTech Telecommunications Ltd. Applicant Address: 23/F, Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong. FCC Specification Standard: FCC Part 15, October 1, 2013 Edition FCC ID: EW780-9648-00 FCC Model(s): VC7151, VC7151-101, VC7151-102, VC7152-201, VC7152-301, VC7151-109, VC715x-abc, VC7100, VC7100-xy IC Specification Standard: RSS-213 Issue 3, March 2015 RSS-Gen Issue 3, December 2010 IC: 1135B-80964800 IC Model(s): VC7151, VC7151-101, VC7151-102, VC7152-201, VC7152-301, VC7151-109, VC7100 Type of EUT: Unlicensed Personal Communications Service Devices Description of EUT: 1.9GHz DECT Cordless Phone with Garage sensor / Contact Sensor Serial Number: N/A Sample Receipt Date: September 12, 2014 Date of Test: October 11, 2014 to December 3, 2014 Report Date: April 02, 2015 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Test Report Number: 14090592HKG-002 Page 2 of 79 FCC ID: EW780-9648-00 IC: 1135B-80964800 Table of Contents 1.0 Test Results Summary & Statement of Compliance............................................... 5 1.1 Summary of Test Results......................................................................................... 5 1.2 Statement of Compliance......................................................................................... 7 2.0 General Description................................................................................................... 9 2.1 Product Description ................................................................................................... 9 2.2 Technical Description ................................................................................................ 9 2.3 Test Methodology.................................................................................................... 10 2.3 Test Facility ............................................................................................................. 10 3.0 System Test Configuration...................................................................................... 12 3.1 Justification ............................................................................................................. 12 3.2 Conducted Emission Test Configuration ................................................................. 13 3.3 Conducted Monitoring and Operational Test Configuration ..................................... 13 3.4 EUT Exercising Software ................................................…

Text truncated - open the document above for the full version.