FBX-5833-0608-01QuickSave MiniTerm

GENOVATION Wireless QuickSave MiniTerm Quick Start Guide Revision A July 2006 Page 2 of 9 1: What’s Included Your Wireless MiniTerm package should include the following items: o 2.4 GHz wireless MiniTerm keypad with or without optional barcode scanner. o 2.4 GHz wireless dongle (also known as a transceiver or bridge). USB 1.0, 1.1, and 2.0 compatible. o Installation CD containing USB Virtual Serial Port driver for Win2k/XP and Win98se and serial test application. o Product documentation. o Two 1.5V C cell alkaline batteries. 2: Product Features o 1x16 super-twist liquid crystal display. o 12-Keys plus hidden “bind” button. o Wireless 2.4Ghz data link (30’ or 10 Meters) with frequency hopping. o PC-based transceiver connects to USB and creates a new Virtual Serial COM port within Windows operating system. o Audible key beeper. o In-band low-battery notifications. o Optional bar code reader. o Dedicated wireless serial data link supports co-location. 3: Dongle/Driver Installation This product is designed to work with computers running Microsoft Windows 2000/XP operating systems. Installation: For Windows 98se and ME 1. Insert the Genovation CD-ROM. 2. Plug in the USB Genovation Virtual Serial dongle. 3. Windows will find new hardware and open “Add New Hardware Wizard” window, Click “NEXT”. 4. Choose “Search for the best driver for your device” and “NEXT”. 5. Choose “CD-ROM drive” as the location for the search and click the “NEXT” button. 6. Windows will locate “HIDCOM.INF”. Click the “NEXT” button. 7. Windows will copy the files and then you click the “FINISH” button. Page 3 of 9 8. Windows will then load and activate the device, please wait for Windows to completely finish this process. Installation: For Windows 2000 and XP 1. Insert the Genovation CD-ROM. 2. Plug in the USB Genovation Virtual Serial dongle. 3. Windows will find new hardware and open “Found New Hardware Wizard” window. Click the “NEXT” button. 4. Choose “Install from a list or specific location” and “NEXT” (Windows XP only). 5. Choose “Search for the best driver in these locations”. 6. Choose “Search Removable Media (Floppy or CD-ROM)”. Click the “NEXT” button. 7. For Windows 2000, “Found HIDCOM.INF” message appears. Click on the “NEXT” button. 8. Windows will locate and install the proper drivers. 9. Windows XP will display a message about “Device Signing”. Click the “CONTINUE ANYWAY” button. 10. Windows will display a “Genovation USB Virtual Serial Device” had been installed. Click the “FINISH” button. 11. Windows XP will Display a message the your new hardware is ready to use. 4: Bind the Keypad and Dongle IMPORTANT! When evaluating or using the unit, in order to reduce battery consumption and radio traffic, the keypad and dongle must be bound and the host computer must open the virtual COM port associated with the dongle. 1. Make sure the dongle is plugged into the PC and the above procedure has been completed. The dongle LED will flash rapidly. 2. Insert the two 1.5v C cell batteries into the keypad battery compartment. Observe proper polarity. The keypad sign-on message will briefly appear on the LCD. 3. Press the hidden BIND button on the keypad. The keypad LCD displays Bind: Press 1-8. If the keypad has already fallen asleep, press one of the number buttons to wake it up, then press bind. 4. On the keypad, press one of the numbered buttons 1 through 8 to assign an ID (timeslot) to the keypad. The keypad displays Binding ID x ... where x is the number of the key you just pressed. 5. Press the bind button on the dongle. The dongle light should flash slowly. Page 4 of 9 6. After a few moments the bind should proceed. If successful, the keypad will revert to it’s normal prompt, Enter Code # and you can proceed to the Test section of this document. If it fails the keypad will display Bind Failed! you should redo the above steps. It is better to perform the steps as quickly as possible. 5: Test the Keypad A simple serial test application has been provided for your convenience. Any terminal emulator software will suffice. Make sure you have completed all of the above steps. Run the supplied test application. You should see the following screen: Click on the COM Port drop down box. You will be given a choice of all available COM ports on your system. The following diagram shows a typical result: Page 5 of 9 On the example PC COM1 and COM2 are associated with the hardware RS232 ports on the back of the computer (the DB-9 connectors). COM4 is associated with the new Genovation Virtual COM Port. Select COM4 and click OPEN. If you are not sure which COM port is assigned to your wireless dongle, click on the following to open the Device Manager (this example is for Win2k): Start -> Settings -> Control Panel ->System -> Hardware -> Device Manager-> Ports You should see something similar to this: Once you have opened the correct port you can test the keypad. Page 6 of 9 Keypad Operation The 8:1 dongle continuously polls its bound keypads on a 1MHz wide channel in the 2.4GHz band. The dongle selects a “quiet” channel and remains there unless there is too much non-MiniTerm activity or there are too many failed data packets. If necessary, the dongle will hop to a quieter new channel. The keypads will locate the dongle by listening for the dongle poll signal. Normally the keypad sleeps after 15 seconds of inactivity to conserve battery power. The following steps describe the user interface with the keypad and other related functions. The table assumes that keypad is asleep. User Operation LCD Shows Comment/Description Press GO key (or any other). Enter Code #: Unit is waiting for advertisement #. Keypad barcode scanner is off. Keypad radio is off. Press an ad number. Keys 1 through 8 only. Enter Phone # Or Scan Card Keypad accepts adv #. User can begin to enter a phone number or scan their barcode (card). Keypad wakes radio briefly. Keypad turns on scanner. * Enter phone number via number pad #:___-___-____ User enters ten numbers …

Text truncated - open the document above for the full version.

11 22 33 44 D D C C B B A A Title Number Revision Size A Date: 2006/9/15 Sheet of File: C:\MSR-Roy\.. \Block Diagram.SchDoc Drawn By: FAN4855 P89LPC935 CYWYSB LCM TPS60400 Barcode Scanner 3.3V Boost CPU WUSB DC Inverter LCD Battery MOSFET-P 3. 3V 5V 3. 3V 3. 3V ZXM61P02F FDV304P or LCD Shutdown V-Save-LCD Barcode Shutdown Low ON Wireless 4:1 Quick-Save Power Management Roy Marson MT712LR-III GQS-12 FAN4855 5V Boost 5V Keypad0 1 2 3 4 5 6 7 8 9 C E 2402~2483MHz crystal 13MHz

Report No.: ER/2006/70015 FCC ID: FBX-5833-0608-01 Issue Date: Sep. 19, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款列 印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不可 部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw APPENDIX 2 EXTERNAL PHOTOGRAPHS OF EUT Report No.: ER/2006/70015 FCC ID: FBX-5833-0608-01 Issue Date: Sep. 19, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款列 印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不可 部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Front View of EUT Back View of EUT

FCC ID LABEL FORMAT AND LOCATION Applicant: Datacomp Electronics Co., Ltd. FCC ID: FBX-5833-0608-01

Report No.: ER/2006/70015 FCC ID: FBX-5833-0608-01 Issue Date: Sep. 19, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款列 印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不可 部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw APPENDIX 3 INTERNAL PHOTOGRAPHS OF EUT Report No.: ER/2006/70015 FCC ID: FBX-5833-0608-01 Issue Date: Sep. 19, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款列 印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不可 部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Open View of EUT – 1 Open View of EUT – 2 Report No.: ER/2006/70015 FCC ID: FBX-5833-0608-01 Issue Date: Sep. 19, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款列 印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不可 部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Internal of EUT – 1(main board 1 with TX Modular) Internal of EUT – 2(main board 1 with TX Modular) Report No.: ER/2006/70015 FCC ID: FBX-5833-0608-01 Issue Date: Sep. 19, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款列 印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不可 部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Internal of EUT – 3 (main board 2) Internal of EUT – 4 (main board 2) Report No.: ER/2006/70015 FCC ID: FBX-5833-0608-01 Issue Date: Sep. 19, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款列 印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不可 部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Internal of EUT – 5(keypad) Internal of EUT – 6 (keypad) Report No.: ER/2006/70015 FCC ID: FBX-5833-0608-01 Issue Date: Sep. 19, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, wi…

Text truncated - open the document above for the full version.

Cypress Semiconductor Corporation•3901 North First Street•San Jose, CA 95134•408-943-2600 August 19, 2003, rev. 0.B WirelessUSB™ LS Theory of Operation WirelessUSB LS System Overview WirelessUSB LS adds to the existing WirelessUSB portfolio a low-cost 2.4-GHz wireless solution that enables the wireless gaming console peripheral device market and displaces the 27-MHz solutions currently used for low-end retail PC Human Interface Device (HID) applications. A WirelessUSB LS system typically consists of a WirelessUSB LS Bridge and at least one WirelessUSB LS HID. The host PC is not aware of the wireless connection, since the interface to the host acts like a normal wired USB HID connection. Therefore, there is no special software required on the host PC in order to support WirelessUSB LS. Figure 1 is a block diagram of the WirelessUSB LS radio. Direct Sequence Spread Spectrum WirelessUSB LS utilizes a 2.4-GHz direct sequence spread spectrum (DSSS) radio interface. DSSS generates a redundant bit pattern for each bit to be transmitted. This bit pattern is called a “chip” or a pseudo noise code. Notice in Figure 2 that the pseudo noise code is a binary signal that is produced at a much higher frequency than the data that is to be transmitted. Because it has a higher frequency, it has a large bandwidth that spreads the signal in the frequency domain (i.e., it spreads its spectrum). The nature of this signal makes it appear that it is random noise. Note: 1.Figure 2 shows the concept of PN Codes using 10 chip PN codes for illustration purposes only. The LS uses 32 chip and 64 chip PN Codes. SERDES A SERDES B DSSS Baseband A DSSS Baseband B SPI Synthesizer GFSK Demodulator GFSK Modulator IRQ SS SCK MISO MOSI RESET PD DIO DIOV A L RFOUT RFIN X13IN X13 X13OUT Block Dia gram CY WUSB6934 Only Figure 1. WirelessUSB LS Block Diagram "one" data bit "zero" data bit 10-chip code word for each "one" data bit same chip code word but inverted for "zero" data bit Figure 2. Pseudo Noise Code [1] WirelessUSB™LS Theory of Operation 2 Contrast the spread waveform of a DSSS signal with the narrowband waveform of a traditional radio signal, both repre- sented in Figure 3. The wide bandwidth provided by the pseudo noise code allows the signal power to drop below the noise threshold without losing any information. This allows DSSS signals to operate in noisy environments and reduces the interference caused by traditional narrowband signals. The longer the chip is, the greater the probability that the original data can be recovered, and, of course, the more bandwidth required. See the section below on Gold Codes for more information on the 32-bit and 64-bit pseudo noise codes used in WirelessUSB LS. The receiver uses a locally generated replica pseudo noise code and a receiver correlator to separate only the desired coded information from all possible signals. A correlator can be thought of as a very special matched filter: it responds only to signals that are encoded with a pseudo noise code that matches its own code. Thus a correlator can be “tuned” to different codes simply by changing its local code. This corre- lator does not respond to man-made, natural, or artificial noise or interference. It responds only to signals with identical matched signal characteristics and encoded with the identical pseudo noise code. Even if one or more bits in the chip are damaged during transmission, statistical techniques embedded in the radio can recover the original data without the need for retransmission. Auto Correlation Auto correlation is the correlation of a variable with itself over successive time intervals, in our case the pseudo noise code. Pseudo noise codes should have a high autocorrelation factor so that the receiver’s correlator correctly matches the received pseudo noise code with its own code. For example, if “1010” was used as the pseudo noise code, the following sequence shows that the correlator would match the code in two separate time positions (1010 – 0101 – 1010 – 0101). If “1001” was used instead, the correlator would only match the code in a single time position allowing the correlator to correctly process the incoming data stream (1001 – 0011 – 0110 – 1100). WirelessUSB LS uses pseudo noise codes that have a high auto correlation factor (see section on Gold Codes). Cross Correlation Cross correlation is the statistical correlation between two different signals as a function of relative time between the signals. In other words, cross correlation measures how unique different pseudo noise codes are. If pseudo noise codes are used that have a low cross correlation factor their signals will not interfere with each other. For example, if “1001” and “1100” are used as pseudo noise codes, if “1100” is time shifted it becomes “1001” and can be incorrectly matched to by the correlator looking for “1001” and not “1100.” If “1001” and “1011” are used instead, “1011” will never be incorrectly matched by the correlator looking for “1001” because these two pseudo noise codes never match no matter how they are shifted. WirelessUSB LS uses pseudo noise codes that have a low cross correlation factor (see section on Gold Codes). Gold Codes WirelessUSB LS uses sets of Gold Codes as pseudo noise codes in order to enable multiple devices to simultaneously transmit on the same frequency. Gold Codes exhibit high auto correlation and minimal, well defined, cross correlation levels with all other members of the set. Gold Codes are excellent pseudo noise codes for code division multiple access (CDMA) systems. WirelessUSB LS can use 32-bit or 64-bit Gold Codes. There are pros and cons to each code length. 32 bit Gold Codes allow a data rate of 32-kbps, while 64-bit Gold Codes allow a data rate of 16 kbps. On the other hand, using 64-bit Gold Codes has a greater probability of recovering the data due to the longer chip length. Analysis has shown that in order to avoid more than one false correlation in one “day” of use, the maximu…

Text truncated - open the document above for the full version.

11 22 33 44 55 66 D D C C B B A A Title Number Revision Size C Date: 2006/7/24 Sheet of File: C:\MSR-Roy\..\Quick-Savev1x.SchDoc Drawn By: 1 2 BZ1BUZZER D11N4 148 V3.3A -Neg Bias Scan2/LCD-DB5 LC D-RS Scan3/LCD-DB6 LC D-ENV-Save-LCD Scan1/LCD-DB4Scan4/LCD-DB7 V3. 3A V3. 3B V3. 3B VC C 6 VC C 9 NC 7 VC C 16 VC C 28 VC C 29 VC C 32 VC C 41 VC C 42 VC C 44 VC C 45 RFIN 46 RFOUT 5 PACTL 34 X13 IN 35 X13 38 X13OUT 26 RESET 14 SS 22 MOSI 23 MISO 24 SCK 25 DIOVAL 19 DIO 20 IRQ 21 PD 33 NC 4 CYWUSB6934-48LFC GND 13 NC 1 NC 2 NC 3 NC 8 NC 10 NC 11 NC 12 NC 15 NC 17 NC 18 NC 27 NC 30 NC 31 NC 36 NC 37 NC 39 NC 40 NC 43 NC 47 NC 48 TAB 49 U2CYWUSB6934_48 2.0pFdC1 2.0 pFdC2 1.2pFd C3 27pFdC4 0.1uFdC5 0.1 uFdC6 0.1 uFdC7 0.1 uFdC8 0.1 uFdC9 0.1uFdC10 3.3nHL1 2.2nHL2 12 13MHz Y1XTAL nRESETIRQnPDnSSMOSISCKMISO ANT Antenna RXD Q1XP151A13A0MR(CES2302) V-Save-LCD -Neg Bias BeeperCircuit May require Resistor for LCD Back-Light LCD Circuit Includes LCD Back-Light Control P0_0 /KBI0 /CMP2 3 P0_1 /CIN2B /KBI1 26 P0_2 /CIN2A /KBI2 25 P0_3 /CIN1B /KBI2 24 P0_4 /CIN1A /KBI4 23 P0_5 /CMPREF /KBI5 22 P0_6 /CMP1 /KBI6 20 P0_7 /T1 /KBI7 19 P1_0 /TxD 18 P1_1 /RxD 17 GND 7 P2_5 /SPICLK 16 VC C 21 P2_4 /SS 15 P2_ 0 1 P2_ 1 2 P2_2 /MOSI 13 P2_3 /MISO 14 P1_2 /T0 /SCL 12 P1_3 /INT0 /SDA 11 P1_4 /INT1 10 P1_5 /RST 6 P1_6 5 P1_7 4 P2_ 6 27 P2_ 7 28 P3_0 /XTAL2 /CLKOUT 9 P3_1 /XTAL1 8 U1 P89LPC93 5 OUT 1 IN 2 C FLY- 3 GND 4 C FLY+ 5 U5 TPS60400 1u FC20 1u FC21 1uFC22 6.2KR93.6KR10 DC Inverter 100KR11100KR12 0.1uFC23 10 0R8 1KR7 LBI-Threshold Return2 Scan3/LCD-DB6 NPD Return1 Buzzer ISP-Reset Scan4/LCD-DB7 ISP-Reset Scan2/LCD-DB5 Return3 LCD-RS Scan1/LCD-DB4 PDA NRESETLCD-ENBind Shutdown- IN SCK PCL IRQ PCLRXDReturn2Return1 Scan3/LCD-DB6 MISO V-Save-LCD MOSI Scan1/LCD-DB4 Return3 Scan2/LCD-DB5 NSS V3.3-ICP V3. 3A V3. 3-ICP V3. 3A LCD LCD WUSB Must be Wired properly LCDLCDWUSB LCDWUSBWUSBWUSB BCR/MCR LCDISP Remove forIn-CircuitProgramming WUSBWUSB LOW BATTERY DETECT Power Save 1 2 JUMPER JP5 0.1uFC24 Q22N2 222A 1KR13 10KR14 12345 JP3ISP-Plu g Buzzer 100 R15 CLOCK OUT Quick-Save (Datacomp Electronics Co.,Ltd.) V1.0 Roy V5.0 D2 1N4 148 D3 1N4 148 D4 1N4 148 VIN 1 /SHDN 2 LBI 3 LBO 4 FB 5 VOUT 6 VL 7 GND 8 U3FAN4855 VIN 1 /SHDN 2 LBI 3 LBO 4 FB 5 VOUT 6 VL 7 GND 8 U4FAN485 5 806K 1%R1191K 1%R2 604K 1%R3360K 1%R4 732K 1%R5240K 1%R6 BATBattery 10uHL3 10uHL4 LBO-OUT VBAT VBAT Shutdown- IN V3. 3A V5. 0 2.2 R16 V3. 3B 10uFC11 0.1uFC18 47uFC13Tantalum 47uFC17Tantalu m 0.1uFC14 47uFC12 47uFC16 18pFC15 18pFC19 Bind 123456789 10 JP4CONNECT10 PDA LBO-OUT D5 1N4 148 LBI-Threshold Scan4/LCD-DB7 123456789 10111213141516 JP2- 1 Header 16 12345 JP3- 1 ISP-Plug 123456789 10 JP4- 1 Header 10 123 JP1- 1 Header 3 Barcode ScannerCi pherLab 1420 1 2 3 4 5 6 7 8 9 Clear 0 Enter LCD 1x16Super-Twist ISP Programmer SW1SW-PB Bind ISPISP Shield GNDShield GND 1234567891011121314 JP2CONNECT14 123456789 1011121314 JP1CONNECT14

Report No.: ER/2006/70015 FCC ID: FBX-5833-0608-01 Issue Date: Sep. 19, 2006 Page: 1 of 25 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條 款列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Product Name: QuickSave MiniTerm Brand Name: GENOVATION Model Name: 5833 FCC ID: FBX-5833-0608-01 Report No.: ER/2006/70015 Issue Date: Sep. 20, 2006 FCC Rule Part: §15.249 Prepared for Datacomp Electronics Co., Ltd. No. 38 Sec. 2, Nankan Rd., Lu-Chu Village, Taoyuan Taiwan, R.O.C. Prepared by SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei County, Taiwan. Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. Report No.: ER/2006/70015 FCC ID: FBX-5833-0608-01 Issue Date: Sep. 19, 2006 Page: 2 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款列 印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不可 部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw VERIFICATION OF COMPLIANCE Applicant: Datacomp Electronics Co., Ltd. No. 38 Sec. 2, Nankan Rd., Lu-Chu Village, Taoyuan Taiwan, R.O.C. Product Description: QuickSave MiniTerm Brand Name: GENOVATION FCC ID Number: FBX-5833-0608-01 Model No.: 5833 Model Difference: N/A File Number: ER/2006/70015 Date of test: Apr. 01, 2006 ~ Sep. 11, 2006 Date of EUT Received: Jul. 28, 2006 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2003) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.249. The test results of this report relate only to the tested sample identified in this report. Test By: Date Sep. 19, 2006 Danny Yeh Prepared By: Date Sep. 19, 2006 Eva Kao Approved By: Date Sep. 19, 2006 Vincent Su Report No.: ER/2006/70015 FCC ID: FBX-5833-0608-01 Issue Date: Sep. 19, 2006 Page: 3 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款列 印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不可 部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Version Version No. Date 00 Sep. 19, 2006 Report No.: ER/2006/70015 FCC ID: FBX-5833-0608-01 Issue Date: Sep. 19, 2006 Page: 4 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款列 印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不可 部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Table of Contents 1. GENERAL IN…

Text truncated - open the document above for the full version.

Report No.: ER/2006/70015 FCC ID: FBX-5833-0608-01 Issue Date: Sep. 19, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise st…

Text truncated - open the document above for the full version.