FHO-E1916Air purifier

1 FÖRNUFTIG 2AA-2250649-1 English IMPORTANT SAFETY INSTRUCTIONS For indoor use only. Regularly check the cord, the transformer and all other parts for damage. If any part is damaged the product should not be used. Important information! Keep these instructions for future use. Cleaning Use a damp cloth, never a strong cleaning agent. English WARNING Deviation from the assembly instructions may result in a risk of fire or electric shock. English Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material. Français CONSIGNES DE SÉCURITÉ IMPORTANTES Uniquement pour une utilisation en intérieur. Vérifier régulièrement que le câble, le transformateur et les autres parties ne sont pas endommagés. Si l'une de ces pièces est endommagée, ne pas utiliser le produit. Information importante. Conserver la notice pour tout utilisation ultérieure. Entretien Nettoyer à l’aide d’un chiffon humide, éviter les détergents puissants. Français ATTENTION Tout écart par rapport aux instructions d'assemblage peut entraîner un risque d'incendie ou de choc électrique. Français Le choix des vis dépend du matériau dans lequel elles doivent être fixées. Utiliser des vis et chevilles adaptées au matériau du support. Español INSTRUCCIONES IMPORTANTES DE SEGURIDAD Sólo para uso en interiores. Comprobar el cable, el transformador y los demás componentes con regularidad para cerciorarte de que no se hayan dañado. Si el producto tiene algún componente dañado, no se debe usar. ¡Información importante! Guardar estas instrucciones para su uso futuro. Limpieza Utiliza un paño húmedo. Evita utilizar detergentes fuertes. Español ADVERTENCIA No seguir las instrucciones de montaje puede resultar en incendio o descarga eléctrica. Español Diferentes materiales requieren diferentes clases de herrajes. Recuerda que los tornillos y tacos que elijas se deben adaptar al material en el que irán sujetos. 3 1 8 4AA-2250649-1 2 3 5 11 5 4 4 mm (1/6") 40 mm (2") 4 mm (1/6") 6 6AA-2250649-1 5 4 45 mm (2,5") Ø 6 mm (1/4") 11 4 mm (1/6") 4 mm (1/6") 40 mm (2") 7 11 4 mm (1/6") 4 mm (1/6") 40 mm (2") 8AA-2250649-1 1 9 2 10AA-2250649-1 11 3 4 12AA-2250649-1 13 6x 14AA-2250649-1 15 16AA-2250649-1© Inter IKEA Systems B.V. 20202020-07-06

FÖRNUFTIG English 4 Français 8 Español 12 4English IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using the product. DANGER To reduce the risk of electric shock: Always unplug this product from the electrical outlet before cleaning. WARNING To reduce the risk of burns, fire, electric shock, or injury to persons, do not use this fan with any Solid-State speed control device. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved by a person responsible for their safety. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. SAVE THESE INSTRUCTIONS FOR FUTURE USE. Electricity safety • Do not use a damaged power plug or loose electric outlet. • Do not move the product by pulling the power cord. • Do not forcibly bend the power cord or run it under a heavy object to prevent it from being damaged or deformed. • If the electric outlet is wet, carefully unplug the product and let the electric outlet completely dry before subsequent use. • Do not handle the power plug with a wet hand. • Do not plug in and plug out the power plug repeatedly. • Unplug the product before repair, inspection, or parts replacement. • Remove any dust or water from the power plug. • Unplug the product if it is not to be used for a long time. • If the power supply cord is damaged, it must be replaced by qualified persons in order to avoid a hazard. • Do not attempt to repair or modify the power cord. • This appliance shall only be used together with the included power supply unit. • If any part is damaged the product should not be used. Installation safety • Do not install the air purifier near a heating device. • Do not install the product in areas where moisture, dust or water (rainwater) is present. • Do not install the product on a sloped floor. • When the product is in use, maintain a distance of 50 cm above the product. 5 • Do not use the product in areas where flammable gases or combustible materials are used or stored. • Do not exert excessive force or shock on the product. • Install the product where no obstacles around the product block the circulation of air. Operation safety • Never put the product in water. • Do not disassemble, repair, or modify the product. • Unplug the product before you clean it. • If the air purifier produces a strange noise, burning smell, or smoke, immediately remove the power plug from the electric outlet and call our customer support. • Do not spray any flammable materials into the air inlet. • Do not stick fingers or foreign objects into the air inlet or outlet. • Replace filters with new ones according to filter replacement cycles. Otherwise product performance may deteriorate as a result. • Do not push or lean against this product, as it may topple over the product. Otherwise physical injury or product malfunction may occur as a result. Care Instructions Unplug the product before cleaning. To clean the product, wipe with a soft moistened cloth. Use another soft, dry cloth to wipe dry. Vacuum clean the pre-filter regularly. Note! Never use abrasive cleaners or chemical solvents as this can damage the product. Filter replacement When replacing the filter it is essential that the user proceeds as follows: A LED on the top indicates a filter that needs to be replaced. Warning! The power supply cord must be disconnected during filter replacement! 1. Disconnect the power and wait until the fan has stopped. 2. Remove the pre-filter by the pull-tag. Clean the pre-filer with a vacuum cleaner or with water depending on the level of contamination. 3. Remove filter(s), and handle used filters carefully, dispose the filter in accordance with local environmental regulations in your country. 4. Clean inside, removing all dust and dirt. 5. Insert the new filter(s). (Do not touch the carbon filter.) 6. Reconnect the power supply cord. 7. When you have replaced a filter, press and hold the RESET button for 5 second. The reset initializes the filter replacement cycle counter. 8. Attach the pre-filter. 6 Technical specifications Model: FÖRNUFTIG Air purifier Type: E1916 Input: 24V DC, 0.8 A, 19W Dimensions: 461 x 310 x 109 mm Weight: approx.2.66 kg (3.05 kg) Filter: HEPA filter, Carbon-filter Optional: Carbon-filter Technical data PSU Type: ICPSW24-19-1 ICPSW24-19-1A Input: 100-240 VAC, 50/60 Hz, 0.4A Output: 24.0V DC, 0.8 A, Max 19.0W Average active efficiency: 88.6 % Efficiency at low load (10 %): 82.3 % No load power consumption: 0.08 W Indoor use only Manufacturer: IKEA of Sweden AB (commercial registration number: 556074-7551) Address: Box 702, SE-343 81 Älmhult, SWEDEN Run modes with HEPA-filter (with Carbon filter) LevelNoise (Spl)CADRPower I28dB(A)30 m³/h (25 m³/h)1.5W (1.4W) II49dB(A)90 m³/h (80 m³/h) 6.5W (5.5W) III60dB(A)140 m³/h (120 m³/h)16W (14W) Filter cleaning and replacement cycles Filtercyclesmethod Pre-filterEvery 2~4 weeksCleaning HEPA filterEvery 4 monthsReplacement Carbon filterEvery 4 monthsReplacement * The recommended filter replacement cycles may differ depending on the operating environment. 7 This device complies with Part 15 of the FCC Rules. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation Science and Economic Development Canada's licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and f…

Text truncated - open the document above for the full version.

July 27th, 2020 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement IKEA of Sweden AB FCC ID: FHO-E1916 To Whom It May Concern: We, IKEA of Sweden AB, hereby authorized Intertek Semko AB , Sweden to act as our Agent for the purpose of preparing application for FCC ID number FHO-E1916 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is August 26st 2020. The Limited Agency Agreement expires on February 1st, 2021, unless sooner terminated or extended by written notic e to I ntertek Semko AB, Sweden and the Federal Communications Commission. This is t o advise that we are in full compliance with the Anti -Drug Abuse Act. The applicant is not subject t o a denial of federal benefits purs uant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is s ubject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Ivan Susak Team Manager, Laws&Standards IKEA of Sweden AB [email protected] +4647681000 © Inter IKEA Systems B.V. 2014

© Inter IKEA Systems B.V. 2014 July 27th, 2020 Attention: Application Examiner RE: Request for Confidentiality Applicant: IKEA of Sweden AB FCC ID: FHO-E1916 To Whom It May Concern: Permanent Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: Schematics Detailed Operational/Functional Description Block diagram Parts list Short-term Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold from public review for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization: Test setup photos External photos Internal photos User manual Rationale for request for confidentiality: IKEA of Sweden AB has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would © Inter IKEA Systems B.V. 2014 also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] Sincerely, Ivan Susak Team Manager –Laws & standards IKEA of Sweden AB [email protected] +4647681000

d^dZWKZd /ŶƚĞƌƚĞŬZĞƉŽƌƚEŽ͗͘ ϮϬϬκϬϳϭϭϯ'hͲϬϬϮŶŶĞdžϭ  sĞƌƐŝŽŶ͗ϬϮͲƉƌŝůͲϮϬϮϬWĂŐĞϭŽĨϭϯ &WĂƌƚϭρ͗ϮϬϭεͲĞ ϭ͘ WWE/y/ͲW,KdK^K&d^d^dhW  ŽŶĚƵĐƚĞĚŵŝƐƐŝŽŶ  ZĂĚŝĂƚĞĚŵŝƐƐŝŽŶ;ϯϬD,njʹϭϬϬϬD,njͿ    d^dZWKZd /ŶƚĞƌƚĞŬZĞƉŽƌƚEŽ͗͘ ϮϬϬκϬϳϭϭϯ'hͲϬϬϮŶŶĞdžϭ sĞƌƐŝŽŶ͗ϭϬͲ:ƵŶĞͲϮϬϭεWĂŐĞϮŽĨϭϯ &WĂƌƚϭρ͗ϮϬϭΘͲĚ  Ϯ͘ WWE/y//ʹW,KdK^K&hd Front view d^dZWKZd /ŶƚĞƌƚĞŬZĞƉŽƌƚEŽ͗͘ ϮϬϬκϬϳϭϭϯ'hͲϬϬϮŶŶĞdžϭ sĞƌƐŝŽŶ͗ϭϬͲ:ƵŶĞͲϮϬϭεWĂŐĞϯŽĨϭϯ &WĂƌƚϭρ͗ϮϬϭΘͲĚ Top view Control knob view Side view Indication for filter reset d^dZWKZd /ŶƚĞƌƚĞŬZĞƉŽƌƚEŽ͗͘ ϮϬϬκϬϳϭϭϯ'hͲϬϬϮŶŶĞdžϭ sĞƌƐŝŽŶ͗ϭϬͲ:ƵŶĞͲϮϬϭεWĂŐĞκŽĨϭϯ &WĂƌƚϭρ͗ϮϬϭΘͲĚ Side view Rear view Location of marking d^dZWKZd /ŶƚĞƌƚĞŬZĞƉŽƌƚEŽ͗͘ ϮϬϬκϬϳϭϭϯ'hͲϬϬϮŶŶĞdžϭ sĞƌƐŝŽŶ͗ϭϬͲ:ƵŶĞͲϮϬϭεWĂŐĞρŽĨϭϯ &WĂƌƚϭρ͗ϮϬϭΘͲĚ Bottom view Cord inlet d^dZWKZd /ŶƚĞƌƚĞŬZĞƉŽƌƚEŽ͗͘ ϮϬϬκϬϳϭϭϯ'hͲϬϬϮŶŶĞdžϭ sĞƌƐŝŽŶ͗ϭϬͲ:ƵŶĞͲϮϬϭεWĂŐĞςŽĨϭϯ &WĂƌƚϭρ͗ϮϬϭΘͲĚ Inner view Inner view d^dZWKZd /ŶƚĞƌƚĞŬZĞƉŽƌƚEŽ͗͘ ϮϬϬκϬϳϭϭϯ'hͲϬϬϮŶŶĞdžϭ sĞƌƐŝŽŶ͗ϭϬͲ:ƵŶĞͲϮϬϭεWĂŐĞϳŽĨϭϯ &WĂƌƚϭρ͗ϮϬϭΘͲĚ Inner view Filter reset button d^dZWKZd /ŶƚĞƌƚĞŬZĞƉŽƌƚEŽ͗͘ ϮϬϬκϬϳϭϭϯ'hͲϬϬϮŶŶĞdžϭ sĞƌƐŝŽŶ͗ϭϬͲ:ƵŶĞͲϮϬϭεWĂŐĞΘŽĨϭϯ &WĂƌƚϭρ͗ϮϬϭΘͲĚ Inner view, location of control board Control board view d^dZWKZd /ŶƚĞƌƚĞŬZĞƉŽƌƚEŽ͗͘ ϮϬϬκϬϳϭϭϯ'hͲϬϬϮŶŶĞdžϭ sĞƌƐŝŽŶ͗ϭϬͲ:ƵŶĞͲϮϬϭεWĂŐĞεŽĨϭϯ &WĂƌƚϭρ͗ϮϬϭΘͲĚ Control board PCB view Control board PCB view d^dZWKZd /ŶƚĞƌƚĞŬZĞƉŽƌƚEŽ͗͘ ϮϬϬκϬϳϭϭϯ'hͲϬϬϮŶŶĞdžϭ sĞƌƐŝŽŶ͗ϭϬͲ:ƵŶĞͲϮϬϭεWĂŐĞϭϬŽĨϭϯ &WĂƌƚϭρ͗ϮϬϭΘͲĚ Inner view Fan motor location d^dZWKZd /ŶƚĞƌƚĞŬZĞƉŽƌƚEŽ͗͘ ϮϬϬκϬϳϭϭϯ'hͲϬϬϮŶŶĞdžϭ sĞƌƐŝŽŶ͗ϭϬͲ:ƵŶĞͲϮϬϭεWĂŐĞϭϭŽĨϭϯ &WĂƌƚϭρ͗ϮϬϭΘͲĚ Fan motor brackt and fan guard Fan motor view d^dZWKZd /ŶƚĞƌƚĞŬZĞƉŽƌƚEŽ͗͘ ϮϬϬκϬϳϭϭϯ'hͲϬϬϮŶŶĞdžϭ sĞƌƐŝŽŶ͗ϭϬͲ:ƵŶĞͲϮϬϭεWĂŐĞϭϮŽĨϭϯ &WĂƌƚϭρ͗ϮϬϭΘͲĚ Cord anchorage view Adapter view (ICPSW24-19-1A) d^dZWKZd /ŶƚĞƌƚĞŬZĞƉŽƌƚEŽ͗͘ ϮϬϬκϬϳϭϭϯ'hͲϬϬϮŶŶĞdžϭ sĞƌƐŝŽŶ͗ϭϬͲ:ƵŶĞͲϮϬϭεWĂŐĞϭϯŽĨϭϯ &WĂƌƚϭρ͗ϮϬϭΘͲĚ Inner view of adapter (ICPSW24-19-1A) Rear view of adapter PCB (ICPSW24-19-1A) ΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎŶĚŽĨZĞƉŽƌƚΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎΎ  Label location for E1916 Förnuftig TYPE:E1916 INPUT:24.0V DC Max.0.8A Max.19W FÖRNUFTIG air cleaner IKEA of Sweden AB SE-34381 Älmhult Indoor use only XXXXX FCC ID: FHO-E1916 Made in China yyww Conforms to UL Std. 507, Certified to CSA Std. C22.2 No. 113 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Label location for E1916 Förnuftig TYPE:E1916 INPUT:24.0V DC Max.0.8A Max.19W FÖRNUFTIG air cleaner IKEA of Sweden AB SE-34381 Älmhult Indoor use only XXXXX FCC ID: FHO-E1916 Made in China yyww Conforms to UL Std. 507, Certified to CSA Std. C22.2 No. 113 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 02-April-2020 Page 1 of 13 FCC Part 15:2019-e 1. APPENDIX I - PHOTOS OF TEST SETUP Conducted Emission Radiated Emission (30 MHz–1000 MHz) TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 2 of 13 FCC Part 15:2018-d 2. APPENDIX II – PHOTOS OF EUT Front view TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 3 of 13 FCC Part 15:2018-d Top view Control knob view Side view Indication for filter reset TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 4 of 13 FCC Part 15:2018-d Side view Rear view Location of marking TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 5 of 13 FCC Part 15:2018-d Bottom view Cord inlet TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 6 of 13 FCC Part 15:2018-d Inner view Inner view TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 7 of 13 FCC Part 15:2018-d Inner view Filter reset button TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 8 of 13 FCC Part 15:2018-d Inner view, location of control board Control board view TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 9 of 13 FCC Part 15:2018-d Control board PCB view Control board PCB view TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 10 of 13 FCC Part 15:2018-d Inner view Fan motor location TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 11 of 13 FCC Part 15:2018-d Fan motor brackt and fan guard Fan motor view TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 12 of 13 FCC Part 15:2018-d Cord anchorage view Adapter view (ICPSW24-19-1A) TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 13 of 13 FCC Part 15:2018-d Inner view of adapter (ICPSW24-19-1A) Rear view of adapter PCB (ICPSW24-19-1A) *****************************End of Report***************************

IKEA of Sweden AB TEST REPORT SCOPE OF WORK EMC TESTING– E1916 REPORT NUMBER 200407113GZU-002 ISSUE DATE [REVISED DATE] 18 July 2020 [---------------------] PAGES 15 DOCUMENT CONTROL NUMBER FCC Part 15:2019-e © 2017 INTERTEK TEST REPORT Room 02, & 101/E201/E301/ E401/E501/E601/E701/E801 of Room 01 1-8/F., No. 7-2. Caipin Road, Science City, GETDD, Guangzhou, Guangdong, China Telephone: +86 20 8213 9688 Facsimile: +86 20 3205 7538 www.intertek.com.cn This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Room 02, & 101/E201/E301/E401/E501/E601/E701/E801 of Room 01 1-8/F., No. 7-2. Caipin Road, Science City, GETDD, Guangzhou, Guangdong, China Version: 02-April-2020 Page 2 of 15 FCC Part 15:2019-e Applicant Name & Address : IKEA of Sweden AB Box 702, SE-343 81 Älmhult, Sweden Manufacturing Site : Leedarson Lighting Co., Ltd. Xingtai Industrial Park, Economic Development Zone, Changtai County, Zhangzhou City, Fujian Province, P.R.China Intertek Report No: 200407113GZU-002 Test standards CFR 47, FCC Part 15, Subpart B:2019 Sample Description Product : Air Purifier Model No. : E1916 Electrical Rating : For adapter: 100V-240V~, 50/60Hz, 0,4A, 23W, Class II, For air purifier: 24,0VDC, 0,8A, 19W Serial No. Not Labeled Date Received : 07 April 2020 Date Test Conducted : 07 April 2020 to 04 July 2020 Prepared and Checked By Jed Guo Engineer Approved By: Sky Zhu Team Leader TEST REPORT Intertek Report No.: 200407113GZU-002 Version: 02-April-2020 Page 3 of 15 FCC Part 15:2019-e CONTENT TEST REPORT ....................................................................................................................... 1 CONTENT ......................................................................................................................... 3 1. TEST RESULTS SUMMARY ......................................................................................... 4 2. EMC RESULTS CONCLUSION...................................................................................... 5 3. LABORATORY MEASUREMENTS ................................................................................ 6 4. EQUIPMENT USED DURING TEST .............................................................................. 7 5. EMI TEST .................................................................................................................. 8 5.1 C ONDUCTED DISTURBANCE VOLTAGE AT MAINS PORTS ........................................................ 8 5.1.1 Block Diagram of Test Setup .............................................................................. 8 5.1.2 Test Setup and Procedure .................................................................................. 8 5.1.3 Limit ................................................................................................................... 9 5.1.4 Test Data and curve ......................................................................................... 10 5.2 R ADIATED EMISSION 30 MHZ -1000 MHZ...................................................................... 12 5.2.1 Block Diagram of Test Setup ............................................................................ 12 5.2.2 Test Setup and Procedure ................................................................................ 12 5.2.3 Limit ................................................................................................................. 13 5.2.4 Test Data and Curve ........................................................................................ 14 5.3 R ADIATED EMISSION ABOVE 1 GHZ ................................................................................. 15 6. PHOTO OF TEST SETUP AND EUT ............................................................................ 15 TEST REPORT Intertek Report No.: 200407113GZU-002 Version: 02-April-2020 Page 4 of 15 FCC Part 15:2019-e 1. TEST RESULTS SUMMARY Classification of EUT: Class B Test Item Standard Result Conducted disturbance voltage at mains ports CFR 47, FCC Part 15, Subpart B Pass Radiated emission (30 MHz–1 GHz) CFR 47, FCC Part 15, Subpart B Pass Radiated emission (Above 1 GHz) CFR 47, FCC Part 15, Subpart B N/A Remark: Reference publication is used for methods of measurement: ANSI C63.4:2014 Remark: 1. The symbol “N/A” in above table means Not Applicable. 2. When determining the test results, measurement uncertainty of tests has been considered. TEST REPORT Intertek Report No.: 200407113GZU-002 Version: 02-April-2020 Page 5 of 15 FCC Part 15:2019-e 2. EMC RESULTS CONCLUSION RE: EMC Testing Pursuant to FCC part 15 performed on the Air Purifier, Model: E1916 We tested the Air Purifier, Model: E1916 to determine if it was in compliance with the relevant standards as marked on the Test Results Summary. We found that the unit met the requirement of FCC part 15 standard when tested as received. The worst case’s test data was presented in this test report. The production units are required to conform to the initial sample as received when the units are placed on the market. TEST REPORT Intertek Report No.: 200407113GZU-002 Version: 0…

Text truncated - open the document above for the full version.

TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 02-April-2020 Page 1 of 13 FCC Part 15:2019-e 1. APPENDIX I - PHOTOS OF TEST SETUP Conducted Emission Radiated Emission (30 MHz–1000 MHz) TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 2 of 13 FCC Part 15:2018-d 2. APPENDIX II – PHOTOS OF EUT Front view TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 3 of 13 FCC Part 15:2018-d Top view Control knob view Side view Indication for filter reset TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 4 of 13 FCC Part 15:2018-d Side view Rear view Location of marking TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 5 of 13 FCC Part 15:2018-d Bottom view Cord inlet TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 6 of 13 FCC Part 15:2018-d Inner view Inner view TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 7 of 13 FCC Part 15:2018-d Inner view Filter reset button TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 8 of 13 FCC Part 15:2018-d Inner view, location of control board Control board view TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 9 of 13 FCC Part 15:2018-d Control board PCB view Control board PCB view TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 10 of 13 FCC Part 15:2018-d Inner view Fan motor location TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 11 of 13 FCC Part 15:2018-d Fan motor brackt and fan guard Fan motor view TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 12 of 13 FCC Part 15:2018-d Cord anchorage view Adapter view (ICPSW24-19-1A) TEST REPORT Intertek Report No.: 200407113GZU-002 Annex 1 Version: 10-June-2019 Page 13 of 13 FCC Part 15:2018-d Inner view of adapter (ICPSW24-19-1A) Rear view of adapter PCB (ICPSW24-19-1A) *****************************End of Report***************************