FHO-E2010Wireless Charger

LIVBOJ English Français Español 6 16 28 6English Charger features • USB power adapter (5V min 2A) and USB Type-C cable not included. • Wirelessly charges Qi-compatible devices. • Compatible with Qi 1.2.4BPP specification. • Temperature and power monitor for safety. • LED status indicator. Instructions for use • Connect the USB cable to the power adapter and to LIVBOJ . Plug it into the wall socket. • For wireless charging, place the device to be charged on top of the plus sign (+) on the charger. The device must be placed directly over the plus sign (+) on the charger for the charging function to work optimally. Note that on some devices you may have to activate 7 wireless charging in settings. • If your battery is completely discharged, it may take a few minutes before it starts charging. This is entirely normal. You can see that the battery has begun charging when the battery symbol appears on your phone. LED indicator (see illustrations): 1. Power on: LED lights up for 3 seconds. 2. Charging: LED on. 3. Charging completed: LED off. 4. Error: LED flashes. Good to know • USB cable length and quality influences charging speed and performance. • Devices may get warm during charging; this is 8 completely normal and they will gradually cool down again after they are fully charged. • Charging time may vary based on the device’s battery capacity, charge level, the age of the battery and the temperature in the surrounding area. • Charger storage temperature: -20°C to 25°C (-4°F to 77°F). • Charger operating temperature: 0°C to 40°C (32°F to 104°F). Unplug the charger from the power source before cleaning and when it is not in use. To clean the charger, wipe with a moist cloth. Never submerge the charger in water. 9 Recommended precautionary measures and technical data: see the back of the charger. Save these instructions for future use. WARNING: • Only charge devices that are Qi-compatible. • The wall socket must be located near the equipment and must be easily accessible. • Only use in dry locations. • Children should be supervised to ensure they do not play with the product. • Never use a damage or faulty USB cable for charging, since this can damage the appliance and harm your device. 10 Product servicing Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. TECHNICAL DATA Type: E2010 LIVBOJ Input: 5V DC, min 2A USB Type-C Indoor use only Operating frequency: 110.3KHZ - 148 KHz Output power: 33 dBμA/m at 3m Manufacturer: IKEA of Sweden AB Address: Box 702, SE-343 81 Älmhult, SWEDEN 11 The ‘Qi’ symbol is a trademark of the Wireless Power Consortium RF EXPOSURE INFORMATION According to RF exposure regulations, under normal operations the end user shall refrain from being closer than 10 cm from the device. This device complies with Part 15 of the FCC Rules/Innovation Science and Economic Development Canada's licence-exempt RSS standard(s). Operation is subject to the following two conditions: 12 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits 13 are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the quipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 14 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 15 The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store. 16Français Caractéristiques du chargeur • Adaptateur USB (5V min 2A) et câble USB Type-C non inclus. • Appareils de charge sans fil compatibles avec la technologie Qi. • Conforme à la norme Qi 1.2.4BPP. • Contrôle température et charge pour plus de sécurité. • Voyant d’état LED. Instructions d'utilisation • Raccorder le câble USB à l’adaptateur et à LIVBOJ, puis brancher à une prise de courant. • Pour le chargement sans fil, placer le téléphone sur le signe (+) du chargeur. L'appareil doit être placé précisément sur le signe (+) du chargeur pour un chargement 17 optimal. Sur certains appareils, il est nécessaire d’activer la fonction de chargement sans fil dans les paramètres pour que le chargement fonctionne. • Si la batterie est complètement déchargée, elle peut mettre quelques minutes avant de commencer à se recharger. Cela est tout à fait normal. Lorsque le symbole de la batterie apparaît sur le téléphone cela indique le début du chargement. Voyant lumineux LED (voir illustrations) : 1. En fonctionnement : la LED s’allume pen…

Text truncated - open the document above for the full version.

IKEA of Sweden AB 2020-06-03 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement IKEA of Sweden AB FCC ID: FHO-E2010 To Whom It May Concern: We, IKEA of Sweden AB hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number FHO-E2010 () under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is 2020-06-03. The Limited Agency Agreement expires on 2021-06- 03, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Sign: Ivan Susak IKEA of Sweden AB Tel: [email protected] Title: Team Manager- Laws & standards

IKEA of Sweden AB Attention: Application Examiner RE: Request for Confidentiality Applicant: IKEA of Sweden AB FCC ID: FHO-E2010 To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request is hereby submitted by IKEA of Sweden AB to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:  Schematics  Detailed Block Diagrams  Detailed Operational/Functional Description Rationale for request for confidentiality: IKEA of Sweden AB has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [For FCC certification; delete for TCB certification: The fee for confidentiality has been submitted along with the fee for certification.] If you have questions or need further information, please contact the undersigned. Sincerely, Sign: Ivan Susak IKEA of Sweden AB Tel: [email protected] Title: Team Manager- Laws & standards

IKEA of Sweden AB Cover Letter-Wireless Charger Approval Date: 2020-06-03 FCC ID: FHO-E2010 There’s a Wireless Charger (contain Wireless charging pad), which would like to have your authorization as Inductive wireless power transfer applications approval Applicant Name & Address : IKEA of Sweden AB Box 702, SE-343 81 Älmhult, Sweden Model No. : E2010 LIVBOJ FCC ID: FHO-E2010 IKEA of Sweden AB KDB 680106 D01 Section 5.2 Requirements: Product Technical Specification Result 1) Power transfer frequency is less than 1 MHz 110.3kHz-148kHz Complied 2) Output power from each primary coil is less than or equal to 15 watts 5Watts Complied 3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils The device include one primary coil Complied 4) Client device is Placed directly in contact with the transmitter Client device is placed directly in contact with the transmitter Complied 5) Mobile exposure conditions only Mobile device Complied 6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Max H-Filed Strength: 0.046A/m Complied IKEA of Sweden AB Sincerely, By: Ivan Susak (Signature 1) (Print name) Title: Team Manager- Laws & Standards On behalf of: IKEA of Sweden AB Telephone: +4647681000

Inside

IKEA of Sweden AB TEST REPORT SCOPE OF WORK EMC TESTING–E2010 LIVBOJ REPORT NUMBER 200326149GZU-002 ISSUE DATE [REVISED DATE] 03-June-2020 [---------------------] PAGES 9 DOCUMENT CONTROL NUMBER © 2017 INTERTEK TEST REPORT Block E, No.7-2 Guang Dong Software Science Park, Caipin Road, Guangzhou Science City, GETDD Guangzhou, China Telephone: 86-20-8213 9688 Facsimile: 86-20-3205 7538 www.intertek.com This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Version: 21 August 2017 Page 2 of 9 Applicant Name & Address : IKEA of Sweden AB Box 702, SE-343 81 Älmhult, Sweden Manufacturing Site : Same as applicant Intertek Report No: FCC ID: 200326149GZU-002 FHO-E2010 Test standards 47 CFR PART 1, Subpart I, Section 1.1310 KDB 680106 D01 RF Exposure Wireless Charging Apps v03 Sample Description Product : Wireless Charger Model No. : E2010 LIVBOJ Electrical Rating : Input: 5Vdc, 2A, Powered by adaptor Output: 5W Max Adaptor (supplied by Client): Model name: ICPSW5-10NA-1 The product will be sold without adaptor USB cable (supplied by Client): 1.5 m x 2 wires unscreened USB cable The product will be sold without USB cable Serial No. Not Labeled Date Received : 26 April 2020 Date Test Conducted : 26 April 2020-06 May 2020 Prepared and Checked By Daniel He Project Engineer Intertek Guangzhou Approved By: Helen Ma Team Leader Intertek Guangzhou TEST REPORT Intertek Report: No: 200326149GZU-002 Version: 21 August 2017 Page 3 of 9 FCC Part 15.225-a CONTENT TEST REPORT ........................................................................................................................... 1 CONTENT ............................................................................................................................. 3 1.0 TEST RESULT SUMMARY ............................................................................................ 4 2.0 GENERAL DESCRIPTION ............................................................................................. 5 2.1 P RODUCT DESCRIPTION ........................................................................................................ 5 2.2 T EST FACILITY ..................................................................................................................... 5 2.3 EUT EXERCISING SOFTWARE ................................................................................................. 5 2.4 S PECIAL ACCESSORIES .......................................................................................................... 5 2.5 E QUIPMENT MODIFICATION ................................................................................................. 5 2.6 S UPPORT EQUIPMENT LIST AND DESCRIPTION .......................................................................... 6 3.0 EMF TEST ................................................................................................................. 7 3.1 STANDARD REQUIREMENT .......................................................................................................... 7 3.2 TEST DATA ............................................................................................................................... 8 4.0 TEST EQUIPMENT LIST ............................................................................................... 9 TEST REPORT Intertek Report: No: 200326149GZU-002 Version: 21 August 2017 Page 4 of 9 FCC Part 15.225-a 1.0 TEST RESULT SUMMARY Classification of EUT: Class B Test ItemStandardResult EMF 47 CFR PART 1, Subpart I, Section 1.1310 PASS Remark: When determining the test results, measurement uncertainty of tests has been considered. TEST REPORT Intertek Report: No: 200326149GZU-002 Version: 21 August 2017 Page 5 of 9 FCC Part 15.225-a 2.0 General Description 2.1 Product Description Operating Frequency 110.3-148KHz Type of Modulation: ASK Antenna Type Inductive loop coil antenna Antenna gain: 0 dBi Power Supply: Input: 5Vdc, 2A, Powered by adaptor Output: 5W Max Power cord: 1.5 m x 2 wires unscreened USB cable 2.2 Test Facility Block E, No.7-2 Guang Dong Software Science Park, Caipin Road, Guangzhou Science City, GETDD Guangzhou, China A2LA Certificate Number 0078.10 Intertek Testing Services Shenzhen Ltd. Guangzhou Branch is accredited by A2LA and Listed in FCC website. FCC accredited test labs may perform both Certification testing under Parts 15 and 18 and Declaration of Conformity testing. 2.3 EUT Exercising Software N/A 2.4 Special Accessories N/A 2.5 Equipment Modification Any modifications installed previous to testing by IKEA of Sweden AB will be incorporated in each production model sold / leased in the United States. No modifications were installed by Intertek Testing Services Shenzhen Ltd. Guangzhou Branch. TEST REPORT Intertek Report: No: 200326149GZU-002 Version: 21 August 2017 Page 6 of 9 FCC Part 15.225-a 2.6 Support Equipment List and Description This product was tested with corresponding support equipment as below: Support Equipment: Equipment Model No. RatingSupplier Mobile phone IPhone 8 --Intertek Remark: the iphone 8 was one of typical client devices, it’s selected such that the EUT was fully exercised at maxi…

Text truncated - open the document above for the full version.

IKEA of Sweden AB TEST REPORT SCOPE OF WORK EMC TESTING–E2010 LIVBOJ REPORT NUMBER 200326149GZU-001 ISSUE DATE [REVISED DATE] 03-June-2020 [---------------------] PAGES 24 DOCUMENT CONTROL NUMBER FCC Part 15:2018-d © 2017 INTERTEK TEST REPORT Block E, No.7-2 Guang Dong Software Science Park, Caipin Road, Guangzhou Science City, GETDD Guangzhou, China Telephone: 86-20-8213 9688 Facsimile: 86-20-3205 7538 www.intertek.com This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Version: 10-June-2019 Page 2 of 24 FCC Part 15:2018-d Applicant Name & Address : IKEA of Sweden AB Box 702, SE-343 81 Älmhult, Sweden Manufacturing Site : Same as applicant Intertek Report No: FCC ID: 200326149GZU-001 FHO-E2010 Test standards 47 CFR PART 15 Subpart C:2019 Sample Description Product : Wireless Charger Model No. : E2010 LIVBOJ Electrical Rating : Input: 5Vdc, 2A, Powered by adaptor Output: 5W Max Adaptor (supplied by Client): Model name: ICPSW5-10NA-1 The product will be sold without adaptor USB cable (supplied by Client): 1.5 m x 2 wires unscreened USB cable The product will be sold without USB cable Serial No. Not Labeled Date Received : 26 April 2020 Date Test Conducted : 26 April 2020-06 May 2020 Prepared and Checked By Daniel He Project Engineer Intertek Guangzhou Approved By: Helen Ma Team Leader Intertek Guangzhou TEST REPORT Intertek Report: No: 200326149GZU-001 Version: 10-June-2019 Page 3 of 24 FCC Part 15:2018-d CONTENT TEST REPORT ........................................................................................................................... 1 CONTENT ............................................................................................................................. 3 1.0 TEST RESULT SUMMARY ............................................................................................ 4 2.0 GENERAL DESCRIPTION ............................................................................................. 5 2.1 P RODUCT DESCRIPTION ........................................................................................................ 5 2.2 R ELATED SUBMITTAL(S) GRANTS ........................................................................................... 5 2.3 T EST METHODOLOGY .......................................................................................................... 5 2.4 T EST FACILITY ..................................................................................................................... 5 3.0 SYSTEM TEST CONFIGURATION ................................................................................. 6 3.1 J USTIFICATION .................................................................................................................... 6 3.2 EUT EXERCISING SOFTWARE ................................................................................................. 7 3.3 S PECIAL ACCESSORIES .......................................................................................................... 7 3.4 M EASUREMENT UNCERTAINTY .............................................................................................. 7 3.5 E QUIPMENT MODIFICATION ................................................................................................. 8 3.6 S UPPORT EQUIPMENT LIST AND DESCRIPTION .......................................................................... 8 4.0 RADIATED EMISSION ................................................................................................. 9 5.0 OCCUPIED BANDWIDTH .......................................................................................... 18 6.0 CONDUCTED EMISSION TEST ................................................................................... 20 7.0 TEST EQUIPMENT LIST ............................................................................................. 23 TEST REPORT Intertek Report: No: 200326149GZU-001 Version: 10-June-2019 Page 4 of 24 FCC Part 15:2018-d 1.0 TEST RESULT SUMMARY Classification of EUT: Class B Test ItemTest RequirementTest MethodResult Conducted disturbance voltage at mains ports FCC PART 15 C section 15.207 ANSI C63.10: Clause 6.2 PASS Radiated Emission FCC PART 15 C section 15.209 ANSI C63.10: Clause 6.4 & 6.5 PASS Occupied Bandwidth FCC PART 15 C section 15.215 FCC PART 15 C section 15.215 PASS Remark: When determining the test results, measurement uncertainty of tests has been considered. TEST REPORT Intertek Report: No: 200326149GZU-001 Version: 10-June-2019 Page 5 of 24 FCC Part 15:2018-d 2.0 General Description 2.1 Product Description Operating Frequency 110.3-148KHz Type of Modulation: ASK Antenna Type Inductive loop coil antenna Antenna gain: 0 dBi Power Supply: Input: 5Vdc, 2A, Powered by adaptor Output: 5W Max Power cord: 1.5 m x 2 wires unscreened USB cable 2.2 Related Submittal(s) Grants This is an application for certification of: DCD-Part 15 Low Power Transmitter below 1705kHz Remaining portions are subject to the following procedures: N/A 2.3 Test Methodology Both AC mains line-conducted and radiated emission measurements were performed according to the procedures in ANSI C63.10. Radiated emission …

Text truncated - open the document above for the full version.

1. Radiated Emissions in Restricted Bands: 9kHz to 30MHz 30MHz to 1GHz: 2. Conducted Emission Test:

Side 1: Side 2: Side 3: Side 4: Top: