FHO-E2705Door window sensor

Internal IKEA of Sweden AB U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Go Global Compliance, Inc. Contact Name: Peter Merguerian Street Address: 4454 Crabapple Ct. City/Province/Zip: Tracy, CA 95377 Telephone No: (408) 931-3303 Email: [email protected] FRN #: 0033672916 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Signed by (Printed Name/Title): Peter Merguerian, President & CEO *This letter must be dated within 1-year (update if other terms apply) of the date the application is submitted to the TCB for device certification The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: IKEA of Sweden AB FRN: 0021625967 FCC ID: FHO-E2705 Contact Name: Ivan Susak Street Address: Box 702, SE-343 81, City/Province/Zip: Älmhult, Sweden Telephone No: +4647681000 Email: [email protected] Applicant Signature: Date: Signed by (Printed Name/Title): Ivan Susak / RA engineering manager Docusign Envelope ID: 9CFBE900-DC05-8FF1-8047-727A4E0150A9 30-06-2026 Docusign Envelope ID: 878B48F4-146C-8F85-8312-C866473C6E5E 14-07-2026

Internal IKEA of Sweden AB Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 2026.6.22 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: FHO-E2705 IKEA of Sweden AB (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Ivan Susak Title: RA engineering manager Address: Box 702 SE-343 81, Almhult, Sweden Tel.: +4647681000 Email: [email protected] Docusign Envelope ID: 88A04376-B57D-8BFA-83DE-1F538D289EE5

Internal IKEA of Sweden AB Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 2026.6.22 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: FHO-E2705 IKEA of Sweden AB (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Ivan Susak Title: RA engineering manager Address: Box 702 SE-343 81, Almhult, Sweden Tel.: +4647681000 Email: [email protected] Docusign Envelope ID: F7679005-6678-854C-821F-2C1B5CD936EB

IKEA of Sweden AB Page 1 of 1 Internal Authority to Act as Agent Date: 2026.5.22 TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint Hongfei Wu of TÜV Rheinland (Shanghai) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with IKEA of Sweden AB (address: Box 702 SE-343 81, Almhult, Sweden). For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: 2026.5.22 Agreement is valid for 12 months from the above date. By: __________________________ Ivan Susak (Signature) (Print name) RA engineering manager +4647681000 (Title) (Telephone) On behalf of: IKEA of Sweden AB (Company Name) Docusign Envelope ID: 11F081FB-622A-89BE-8330-EEADB337229D

IKEA of Sweden AB MS-0044715 Page 1 of 1 Revision 1 Internal Date: 2026.6.22 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: FHO-E2705 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent Tune-Up Procedure Short Term Permanent User’s Manual*** Short Term Permanent Part List/ Antenna Construction IKEA of Sweden AB has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: __________________ RA engineering manager __ ___________ Ivan Susak _________________ (Signature/Title) (Print name) Tel: +4647681000 Email: [email protected] Docusign Envelope ID: F446D356-5556-85AD-8204-90BCAB8D6FEF

TYPE: E2705 MYGGBETT Input: 1xAAA XXYY 50255 IKEA of Sweden AB SE-343 81 Älmhult IKEA.com Made in Vietnam CAN ICES(B)/NMB(B) Fabriqué au Viêt Nam min8,0 mm min6,1 mm min41,0 mm min4,6 mm min6,9 mm min5,0 mm min7,0 mm min7,0 mm HVIN: E2705 IC : 10912A-E2705 FCC ID : FHO-E 2705 10,0 4,1 A B D E 1 2 3 4 5 6 7 8 C A BD E C F F 1 2 3 4 5 6 7 8 A4 R1 .X=±0.3 .XX=±0.13 ∠=±1° FAI X SPC X * F F 1 2 3 4 5 6 7 8 门窗传感器 激光打码 -NA\Door and window sensor laser coding NA Cảm biến cửa sổ đánh dấu laser - NA 曾建明 谭林 2026/06/24 1:1 KV001 门窗传感器 白色(NCS S 0602-G92Y) NAKV001 Door and window sensor white （NCS S0602-G92Y) NA KV001 Cảm biản cảa sả,màu Trảng (NCS S 0602-G92Y) NA 0.0-PEND-BASE-1988 KG0002-800-03R1 KG.0002NA255W45-00 谭林 成品编码 Project code Mã dự án 成品名称 Project name Tên sản phẩm 材质符合环保要求/ROHS/ Chất liệu phù hợp với các yêu cầu về môi trường 更改标记 Change Sequence Lịch sử thay đổi 更改描述 Change Description Thay đổi mô tả 未注尺寸公差要求/Default tolerance/ Yêu cầu dung sai kích thước chưa được ghi chú : 尺寸公差标准/Reference standards/ Tiêu chuẩn tham khảo ：ASME Y14.5M-2018 =首件检测/FIRST ARTICLE INSPECTION / Kiểm tra sản phẩm đầu tiên =统计过程控制/STATISTICAL PROCESS CONTROL / Kiểm soát quá trình thống kê =关键产品尺寸/CRITICAL DIMENSIONS / Kích thước sản phẩm 单位/Unit/ Đơn vị : mm C Ò NG TY TNHH KWONG MING ELECTRICAL VI É T NAM 表单编号/Doc code/ Mã biểu mẫu :KMV-RD-REF-004 A0 设计\Designer Thiết kế 审核/Reviewer Người kiểm tra 批准/Approver Người phê duyệt 日期/Date Ngày 物料名称/Part name Tên nguyên vật liệu 物料编码/Part code Mã Nguyên vật liệu 材质/Material Chất liệu 图号/Drawing code Mã bản vẽ 比例/Scale Tỷ lệ 版本/Version Phiên bản 技术说明： Mô tả kỹ thuật: 1. 字迹和符号清晰、整齐、无明显扭曲、倾斜、重叠，文字和符号间隔分明， 字帖为 “ Noto IKEA Latin", 字高 1.2mm 。 The handwriting and symbols are clear, neat, without obvious distortion, tilt, or overlap, and the spacing between the text and symbols is distinct, The calligraphy is "Noto IKEA Latin" with a height of 1.2mm. Chữ viết tay và biểu tượng rõ ràng, gọn gàng, không có biến dạng rõ ràng, nghiêng, chồng chéo, khoảng cách rõ ràng giữa các từ và biểu tượng,Dòng chữ "Noto IKEA Latin" có chiều cao 1,2mm. 2.matter “QR code” 和 “1234-567-8901” 为随机码（可变）。 "XXYY" 为周期码。 Matter "QR code" and "1234-567-8901" are random codes (variable). XXYY "is a periodic code. matter "QR code" và "1234-567-8901" là mã ngẫu nhiên (có thể thay đổi). "XXYY" là mã tuần hoàn.3. 洋红色为打码内容，打码表面能通过安规擦拭测试。 The magenta color represents the coding content, and the coding surface can pass the safety wiping test. Màu đỏ tươi là nội dung đánh mã, bề mặt đánh mã có thể thông qua kiểm tra lau chùi an toàn. 4. 激光喷码，颜色：黑色。 Laser coding, color: black. Mã phun laser, màu sắc: đen. 5. 标贴内容见上图框，样式按照图纸 1:1 比例制作。 The content of the label is shown in the frame above, and the style is made according to the 1:1 scale of the drawing. Nội dung dán dấu được hiểu trong khung hình, kiểu được làm theo tỉ lệ 1:1 của bản vẽ. 6. 黑色线为外形参考线，不须打印。 The black line is the reference line for the appearance and does not need to be printed. Đường màu đen là đường tham chiếu tổng thể, không cần in. min8,0 mm min8,0 mm 1

TUV Rheinland (Shanghai) Co., Ltd. 1st Floor of No. 10, No.153, 165, 177, 179, 189, Lane 777, West Guangzhong Road, Jingan District, Shanghai. Mail: [email protected] Web: www.tuv.com V101023GCNSR Prüfbericht - Produkte Test report - Products Certificate #4301.01 Prüfbericht-Nr.: Test Report No.: CN26ABLF 001 Auftrags-Nr.: Order No.: 326184614 Seite 1 von 20 Page 1 of 20 Kunden-Referenz-Nr.: Client Reference No.: 1288983 Auftragsdatum: Order date.: 2026-04-30 Auftraggeber: Client: IKEA of Sweden AB Box 702, SE-343 81, Älmhult, Sweden Prüfgegenstand: Test item: Door Window Sensor Bezeichnung / Typ-Nr.: Identification / Type No.: E2705 Auftrags-Inhalt: Order content: TÜV Rheinland EMC service Prüfgrundlage: Test specification: FCC 47 CFR Part 15, Subpart B:2024 Class B ICES-003:2020 Wareneingangsdatum: Date of receipt: 2026-05-06 Refer to the EUT photos file Prüfmuster-Nr.: Test sample No.: A004270071-001~002 Prüfzeitraum: Testing period: 2026-05-13 Ort der Prüfung: Place of testing: Refer to clause 1.1 Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shanghai) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: / tested by: Datum: / Date: 2026-06-17 Stellung: / Position: Project engineer genehmigt von: / authorized by: Ausstellungsdatum: /Issue date: 2026-06-17 Stellung: / Position: Authorizer Sonstiges / Other: FCC ID: FHO-E2705 IC: 10912A-E2705 Test Firm Name: TUV Rheinland (Shanghai) Co., Ltd. Designation Number: CN1396 Test Firm Registration Number: 930979 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet Legend: P(ass) = passed a.m. test specifications(s) F(ail) = failed a.m. test specifications(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. JiaYi Zhou Jiuyu Huang Prüfbericht - Produkte Test report - Products Prüfbericht - Nr.: Test Report No.: CN26ABLF 001 Seite 2 von 20 Page 2 of 20 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical meas…

Text truncated - open the document above for the full version.