FHO-LED1908G5Self-Ballasted LED-lamp

FCC part 15 English This device complies with Part 15 of the FCC Rules/Innovation Science and Economic Development Canada's licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Français Cet appareil est conforme à l’article 15 du règlement de la FCC, ainsi qu’aux normes d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. Son fonctionnement est autorisé aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage, (2) l’appareil doit accepter tout brouillage radioélectrique subi, même si cela est susceptible de compromettre son fonctionnement. ATTENTION : Tout changement ou modification apportés à cet appareil sans approbation expresse de la partie responsable de la conformité peut rendre nulle la capacité de l’utilisateur à utiliser cet appareil. REMARQUE : Cet appareil a été testé et il est conforme aux exigences relatives aux appareils électroniques de classe B, selon la section 15 des règles de la FCC (Commission fédérale des communications). Ces exigences sont prévues pour fournir une protection raisonnable contre les interférences nuisibles dans le cas d’une installation domestique. Cet appareil génère, utilise et peut émettre de l’énergie sous forme de fréquences radio. Si l’appareil n’est pas installé ou utilisé conformément aux instructions, il peut provoquer des interférences perturbant les communications radio. Il est cependant impossible de garantir l’absence totale d’interférences d’une installation donnée. Si cet appareil produit des interférences nuisibles à la réception radio/télévision, ce qui peut-être déterminé en mettant successivement l’appareil sous tension et hors tension, nous conseillons à l’utilisateur d’essayer de remédier à ce problème en suivant l’une des procédures suivantes : • Réorienter ou déplacer l’antenne de réception. • Augmenter la distance entre l’appareil et le récepteur. • Brancher l’appareil à une prise placée sur un circuit différent de celui auquel le récepteur est raccordé. • Contacter votre revendeur ou tout technicien radio/TV qualifié pour obtenir de l’aide. Español Este aparato es conforme al artículo 15 del reglamento de la FCC, así como a las normas de Innovación, Ciencia y Desarrollo económico de Canadá aplicables a los aparatos de radio exentos de licencia. Su funcionamiento está sujeto a las dos condiciones siguientes: (1) El aparato no debe producir interferencias dañinas y (2) el aparato debe aceptar cualquier interferencia que reciba, incluidas las que puedan determinar el funcionamiento no deseado del mismo. ATENCIÓN: Cualquier cambio o modificación que se realice en este aparato sin la aprobación expresa de la parte responsable de la conformidad puede anular la capacidad del usuario para utilizar el aparato. NOTA: Este equipo ha sido probado para comprobar que cumple los límites establecidos en los dispositivos digitales de Clase B, según el apartado 15 del reglamento FCC. Estos límites se han establecido para proporcionar una protección razonable contra las interferencias perjudiciales en una instalación doméstica. Este equipo genera, usa e irradia energía de radiofrecuencia, y si no se instala y se usa de acuerdo con las instrucciones, puede causar interferencias perjudiciales en las comunicaciones por radio. Sin embargo no existe garantía de que no se produzcan interferencias en una instalación en concreto. Si el equipo produjera interferencias perjudiciales en la recepción de radio o TV, lo que se puede comprobar encendiendo y apagando el equipo, recomendamos al usuario que intente corregir dichas interferencias adoptando una o más de las siguientes medidas: • Reorientar o recolocar la antena receptora. • Aumentar la distancia entre el equipo y el receptor. • Conectar el equipo a un enchufe o circuito distinto al que esté conectado el receptor. • Solicitar ayuda al vendedor o a un técnico cualificado de radio/TV. © Inter IKEA Systems B.V. 2020 AA-xxxxxxx-1

244.7 200.081.0 70.0 70.0 15.0 45.0 44.8 2700K E12 LED1908G5 2 x AA-xxxxxxx- x SE-343 81 Ä lmhult www.IKEA.com IKEA of Sweden AB© I nter I KEA S ystem s B .V. 2 018 4.3 W = 40 W 450 lm RYET LED 4.3 W = 40 W 450 lm RYET LED 2700K 15 000h E12 LED1908G5 120V~ 46mA 60Hz CRI>80 105 lm/W D 45mm L 76mm x 15 000 US Warranty/Garantía: 3 years/3 años Dimmer compatibility/ Reguladores de intensidad compatibles: www.ikea.com SIZE:70X45X81mm RYET N2 E12 450lm 45 mm globe opalwhi 2-p NA ATTENTION: NE CONVIENT PAS AUX SORTIES DE SECOURS.NE PAS UTILISER AVEC DES GRAD ATEURS. Ampoule conçue pour utilisation en intérieur à une température ambiante comprise entre -20ºC et 25ºC.Cet équipement est conforme à la section 15 des règles de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet équipement ne doit pas causer d’interférence nuisible et (2) cet équipement doit accepter toutes les interférences reçues, y compris celles qui peuvent causer un fonctionnement indésirable.NMB-005(B) CAUTION: THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS. DO NOT USE WITH DIMMERS. Reliable operating temperature is -20ºC~25ºC. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-005(B) PRECAUCIÓN: ESTE DISPOSITIVO NO SE DESTINA PARA USO EN SALIDAS DE EMERGENCIA. NO USAR CON ATENUAD ORES DE LUZ. El rango confiable de temperatura de funcionamien- to es -20~25. Estas lámparas cumplen con los requisitos de etiquetado de la eficiencia energética Federal. Este aparato cumple la parte 15 de las normas FCC. Su funcionamiento está sujeto a las dos condiciones siguientes: 1.Este aparato no debe provocar interferencias perjudiciales. 2.Debe aceptar cualquier interferencia que reciba, incluidas las interferencias que puedan suponer un mal funcionamiento. El aparato no debe utilizarse por personas (incluyendo niños) con capacidades físicas, sensoriales o mentales reducidas, o carezcan de experiencia o conocimiento, a menos que reciban supervisión o capacitación. Los niños deben supervisarse para que no jueguen con el aparato.

August 26th, 2019 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement IKEA of Sweden AB FCC ID: FHO-LED1908G5 To Whom It May Concern: We, IKEA of Sweden AB, hereby authorized Intertek Semko AB, Sweden to act as our Agent for the purpose of preparing application for FCC ID number FHO-LED1908G5 under all applicable parts of the FCC rules and regulations. Th e effective date of thi s limited agency agreement is August 1st, 2019. The Limited Agency Agreement expires on April 1st, 2020, unless s ooner terminated or extended by written notice to Intertek Semko AB, Sweden and the Federal Communications Commission. This is t o advise that we are in full compliance with the Anti -Drug Abuse Act. Th e applicant is not subject t o a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is s ubject to a denial of federal benefits pursuant to that section. If you hav e any questions or comments, please do not h esitate to contact me. Sincerely, Ivan Susak Team Manager, Laws&Standards IKEA of Sweden AB [email protected] +4647681000 © Inter IKEA Systems B.V. 2014

© Inter IKEA Systems B.V. 2014 August 26th, 2019 Attention: Application Examiner RE: Request for Confidentiality Applicant: IKEA of Sweden AB FCC ID: FHO-LED1908G5 To Whom It May Concern: Permanent Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: Schematics Detailed Operational/Functional Description Block diagram Parts list Short-term Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold from public review for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization: Test setup photos External photos Internal photos User manual Rationale for request for confidentiality: IKEA of Sweden AB has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would © Inter IKEA Systems B.V. 2014 also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] Sincerely, Ivan Susak Team Manager –Laws & standards IKEA of Sweden AB [email protected] +4647681000

External photos LED1908G5: Revision 2 Revision Comment No. of Changes Checked by Approved by Cao Quang Dong Duong (cqdd) Approved date 2019-12-12 Designed by IKEA of Sweden No. of Pages 1 (1) Tolerance none Replaces document Description Light Bulbs and Tubes ♦ ♦ _____________________________________________________________________________________ Name Marking LED1908G5 E12 NA&MX 19972 Product Name - Doc number 2214215 Measurements according to the SI systems. T his drawing is IKEA` property and is covered by industrial and intellectual property rights and should, without written consent from IKEA, in no way be copied, reproduced or com- municated or otherwise used for any other purpose other than that which has been agreed. A4 Template Version: 3.1 MEASURED IMAGE Marking_19972_ LED1908G5_E12_NAMX Marking Position Text size 6pt CONFORMS TO UL STD. 1993 CERTIFIED TO CSA STD. C22.2 NO.1993 LED1908G5 E12 450lm 4.3W 2700K 120V~/60Hz 46mA 105lm/W 19972 YYWW MADE IN CHINA F CC ID:FHO-LED1908G5 CAUTION: RISK OF ELECTRIC SHOCK–USE IN DRY LOCATION ONLY. CAN ICES-005 (B) ATTENTION: RI SQUE DE CHOC ÉLECTRIQUE- UTILISER DANS UN EMPLACEMENT SEC UNIQUEMENT.NMB-005 (B)

Revision 2 Revision Comment No. of Changes Checked by Approved by Cao Quang Dong Duong (cqdd) Approved date 2019-12-12 Designed by IKEA of Sweden No. of Pages 1 (1) Tolerance none Replaces document Description Light Bulbs and Tubes ו ו _____________________________________________________________________________________ Name Marking LED1908G5 E12 NA&MX 19972 Product Name - Doc number 2214215 Des IKE Measurements according to the SI systems. This drawing is IKEA` property and is covered by industrial a nd intellectual property rights and should, without written consent from IKEA, in no way be copie d, reproduced or com- municated or otherwise used for any other purpose other than t hat which has been agreed. A4 Template Version: 3.1 MEASURED IMAGE Marking_19972_ LED1908G5_E12_NAMX Marking Position 7H[WVL]HSW CONFORMS TO UL STD. 1993 CERTIFIED TO CSA STD. C22.2 NO.1993 LED1908G5 E12 450lm 4.3W 2700K 120V~/60Hz 46mA 105lm/W 19972 YYWW MADE IN CHINA F CC ID:FHO-LED1908G5 CAUTION: RISK OF ELECTRIC SHOCK–USE IN DRY LOCATION ONLY. CAN ICES-005 (B) ATTENTION: RI SQUE DE CHOC ÉLECTRIQUE- UTILISER DANS UN EMPLACEMENT SEC UNIQUEMENT.NMB-005 (B)

Internal photos LED190 8G5: Exploded view

IKEA of Sweden AB TEST REPORT SCOPE OF WORK EMC TESTING–LED1908G5 REPORT NUMBER 190717068GZU-001 ISSUE DATE [REVISED DATE] 01-November-2019 [25-March-2020] PAGES 15 DOCUMENT CONTROL NUMBER FCC Part 15:2018-d © 2017 INTERTEK TEST REPORT Block E, No.7-2 Guang Dong Software Science Park, Caipin Road, Guangzhou Science City, GETDD Guangzhou, China Telephone: 86-20-8213 9688 Facsimile: 86-20-3205 7538 www.intertek.com This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Version: 10-June-2019 Page 2 of 15 FCC Part 15:2018-d Applicant Name & Address : IKEA of Sweden AB Box 702, SE-343 81 Älmhult, Sweden Manufacturing Site : Dongguan Kee Tat Lighting Limited Kai Shek Cheng DONGGUAN Guangdong Province 523000, China Intertek Report No: 190717068GZU-001, Amendment 1 Test standards CFR 47, FCC Part 15, Subpart B:2018 Sample Description Product : Sel f-ballasted LED lamp Model No. : LED1908G5 Electrical Rating : 120VAC, 60Hz, 46mA, 4.3W, E12 base, 8 pcs non-replaceable LEDs. Serial No. Not Labeled Date Received : 24 March2020 Date Test Conducted : -- Prepared and Checked By Jackson Zhang Project Engineer Intertek Guangzhou Approved By: Maggie Xie Sr. Project Engineer Intertek Guangzhou TEST REPORT Intertek Report: No: 190717068GZU-001, Amendment 1 Version: 10-June-2019 Page 3 of 15 FCC Part 15:2018-d CONTENT TEST REPORT ....................................................................................................................... 1 CONTENT ......................................................................................................................... 3 1. TEST RESULTS SUMMARY ......................................................................................... 4 2. EMC RESULTS CONCLUSION...................................................................................... 5 3. LABORATORY MEASUREMENTS ................................................................................ 6 4. EQUIPMENT USED DURING TEST .............................................................................. 7 5. EMI TEST .................................................................................................................. 9 5.1 CONDUCTED DISTURBANCE VOLTAGE AT MAINS PORTS ......................................................... 9 5.1.1 Block Diagram of Test Setup ............................................................................... 9 5.1.2 Test Setup and Procedure ................................................................................... 9 5.1.3 Limit .................................................................................................................. 10 5.1.4 Test Data and curve .......................................................................................... 10 5.2 RADIATED EMISSION 30 MHZ -1000 MHZ ...................................................................... 12 5.2.1 Block Diagram of Test Setup ............................................................................. 12 5.2.2 Test Setup and Procedure ................................................................................. 12 5.2.3 Limit .................................................................................................................. 13 5.2.4 Test Data and Curve ......................................................................................... 13 5.3 RADIATED EMISSION ABOVE 1 GHZ ................................................................................. 15 6. PHOTO OF TEST SETUP AND EUT ............................................................................ 15 TEST REPORT Intertek Report: No: 190717068GZU-001, Amendment 1 Version: 10-June-2019 Page 4 of 15 FCC Part 15:2018-d 1. TEST RESULTS SUMMARY Classification of EUT: Class B Test Item Standard Result Conducted disturbance voltage at mains ports CFR 47, FCC Part 15, Subpart B Pass Radiated emission (30 MHz–1 GHz) CFR 47, FCC Part 15, Subpart B Pass Radiated emission (Above 1 GHz) CFR 47, FCC Part 15, Subpart B N/A Remark: Reference publication is used for methods of measurement: ANSI C63.4:2014 Remark: 1. The symbol “N/A” in above table means Not Applicable. 2. When determining the test results, measurement uncertainty of tests has been considered. TEST REPORT Intertek Report: No: 190717068GZU-001, Amendment 1 Version: 10-June-2019 Page 5 of 15 FCC Part 15:2018-d 2. EMC RESULTS CONCLUSION RE: EMC Testing Pursuant to FCC part 15 performed on the Self-ballasted LED lamp, Models: LED1908G5. Report revision reason: This report is the revision of the previous test report 190717068GZU-001 dated 01 November 2019 and shall replace original report. Use the new FCC report template. New FCC report photo separate document 190717068GZU-001, Amendment 1 Annex 1. All test data from the original report. We tested the Self-ballasted LED lamp, Model: LED1908G5, to determine if it was in compliance with the relevant standards as marked on the Test Results Summary. We found that the unit met the requirement of FCC part 15 standard when tested as received. The worst case’s test data was presented in this test report. The production units are required to conform to…

Text truncated - open the document above for the full version.

TEST REPORT Intertek Report: No: 190717068GZU-001, Amendment 1 Annex 1 Version: 10-June-2019 Page 1 of 4 FCC Part 15:2018-d ANNEX - PHOTOS OF TEST SETUP Conducted Emission Radiated Emission (30 MHz–1000 MHz) TEST REPORT Intertek Report: No: 190717068GZU-001, Amendment 1 Annex 1 Version: 10-June-2019 Page 2 of 4 FCC Part 15:2018-d ANNEX – PHOTOS OF EUT Outside Internal view TEST REPORT Intertek Report: No: 190717068GZU-001, Amendment 1 Annex 1 Version: 10-June-2019 Page 3 of 4 FCC Part 15:2018-d Internal view TEST REPORT Intertek Report: No: 190717068GZU-001, Amendment 1 Annex 1 Version: 10-June-2019 Page 4 of 4 FCC Part 15:2018-d PCB view *****************************End of Report***************************