FHO-LED2029G4Class 2 luminaire

FCC part 15 English This device complies with Part 15 of the FCC Rules/Innovation Science and Economic Development Canada's licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Français Cet appareil est conforme à l’article 15 du règlement de la FCC, ainsi qu’aux normes d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. Son fonctionnement est autorisé aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage, (2) l’appareil doit accepter tout brouillage radioélectrique subi, même si cela est susceptible de compromettre son fonctionnement. ATTENTION : Tout changement ou modification apportés à cet appareil sans approbation expresse de la partie responsable de la conformité peut rendre nulle la capacité de l’utilisateur à utiliser cet appareil. REMARQUE : Cet appareil a été testé et il est conforme aux exigences relatives aux appareils électroniques de classe B, selon la section 15 des règles de la FCC (Commission fédérale des communications). Ces exigences sont prévues pour fournir une protection raisonnable contre les interférences nuisibles dans le cas d’une installation domestique. Cet appareil génère, utilise et peut émettre de l’énergie sous forme de fréquences radio. Si l’appareil n’est pas installé ou utilisé conformément aux instructions, il peut provoquer des interférences perturbant les communications radio. Il est cependant impossible de garantir l’absence totale d’interférences d’une installation donnée. Si cet appareil produit des interférences nuisibles à la réception radio/télévision, ce qui peut-être déterminé en mettant successivement l’appareil sous tension et hors tension, nous conseillons à l’utilisateur d’essayer de remédier à ce problème en suivant l’une des procédures suivantes : • Réorienter ou déplacer l’antenne de réception. • Augmenter la distance entre l’appareil et le récepteur. • Brancher l’appareil à une prise placée sur un circuit différent de celui auquel le récepteur est raccordé. • Contacter votre revendeur ou tout technicien radio/TV qualifié pour obtenir de l’aide. Español Este aparato es conforme al artículo 15 del reglamento de la FCC, así como a las normas de Innovación, Ciencia y Desarrollo económico de Canadá aplicables a los aparatos de radio exentos de licencia. Su funcionamiento está sujeto a las dos condiciones siguientes: (1) El aparato no debe producir interferencias dañinas y (2) el aparato debe aceptar cualquier interferencia que reciba, incluidas las que puedan determinar el funcionamiento no deseado del mismo. ATENCIÓN: Cualquier cambio o modificación que se realice en este aparato sin la aprobación expresa de la parte responsable de la conformidad puede anular la capacidad del usuario para utilizar el aparato. NOTA: Este equipo ha sido probado para comprobar que cumple los límites establecidos en los dispositivos digitales de Clase B, según el apartado 15 del reglamento FCC. Estos límites se han establecido para proporcionar una protección razonable contra las interferencias perjudiciales en una instalación doméstica. Este equipo genera, usa e irradia energía de radiofrecuencia, y si no se instala y se usa de acuerdo con las instrucciones, puede causar interferencias perjudiciales en las comunicaciones por radio. Sin embargo no existe garantía de que no se produzcan interferencias en una instalación en concreto. Si el equipo produjera interferencias perjudiciales en la recepción de radio o TV, lo que se puede comprobar encendiendo y apagando el equipo, recomendamos al usuario que intente corregir dichas interferencias adoptando una o más de las siguientes medidas: • Reorientar o recolocar la antena receptora. • Aumentar la distancia entre el equipo y el receptor. • Conectar el equipo a un enchufe o circuito distinto al que esté conectado el receptor. • Solicitar ayuda al vendedor o a un técnico cualificado de radio/TV. © Inter IKEA Systems B.V. 2020 AA-xxxxxxx-1

ENGLISH The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store. DEUTSCH Das Symbol mit der durchgestrichenen Abfalltonne bedeutet, dass das Produkt getrennt vom Haushaltsabfall entsorgt werden muss. Das Produkt muss gem. der örtlichen Entsorgungsvorschriften der Wiederverwertung zugeführt werden. Durch separate Entsorgung des Produkts trägst du zur Minderung des Verbrennungs- oder Deponieabfalls bei und reduzierst eventuelle negative Einwirkungen auf die menschliche Gesundheit und die Umwelt. Weitere Informationen im IKEA Einrichtungshaus. FRANÇAIS Le pictogramme de la poubelle barrée indique que le produit doit faire l’objet d’un tri. Il doit être recyclé conformément à la réglementation environnementale locale en matière de déchets. En triant les produits portant ce pictogramme, vous contribuez à réduire le volume des déchets incinérés ou enfouis, et à diminuer tout impact négatif sur la santé humaine et l’environnement. Pour plus d’information, merci de contacter votre magasin IKEA. NEDERLANDS Het symbool met de doorgestreepte vuilnisbak op wieltjes geeft aan dat het product gescheiden van het huishoudelijk afval moet worden aangeboden. Het product moet worden ingeleverd voor recycling in overeenstemming met de plaatselijke milieuvoorschriften voor afvalverwerking. Breng het naar de plaatselijke milieustraat of het dichtstbijzijnde IKEA woonwarenhuis. Door producten met dit symbool te scheiden van het huishoudelijk afval, help je de hoeveelheid afval naar verbrandingsovens of stortplaatsen te verminderen en eventuele negatieve invloeden op de volksgezondheid en het milieu te minimaliseren. Voor meer informatie neem contact op met IKEA. DANSK Symbolet med den overkrydsede affaldsspand på hjul angiver, at produktet skal bortskaffes adskilt fra husholdningsaffald. Produktet skal indleveres til genbrug i henhold til den lokale miljølovgivning for bortskaffelse af affald. Ved at adskille produktet fra husholdningsaffald hjælper du med at reducere den mængde affald, der sendes til forbrænding eller på lossepladsen, og minimerer eventuelle negative indvirkninger på menneskers sundhed og miljøet. Kontakt det nærmeste IKEA varehus for at få flere oplysninger. ÍSLENSKA Táknið með mynd af ruslatunnu með krossi yfir þýðir að ekki má farga vörunni með venjulegu heimilissorpi. Vörunni þarf að skila í endurvinnslu eins og lög gera ráð fyrir á hverjum stað fyrir sig. Með því að henda slíkum vörum ekki með venjulegu heimilissorpi hjálpar þú til við að draga úr því magni af úrgangi sem þarf að brenna eða nota sem landfyllingu og lágmarkar möguleg neikvæð áhrif á heilsu fólks og umhverfið. Þú færð nánari upplýsingar í IKEA versluninni. NORSK Symbolet viser en søppeldunk med et kryss over. Dette betyr at produktet ikke skal kastes i søpla, men holdes atskilt fra husholdningsavfallet. Produktet skal leveres til resirkulering i henhold til lokale ordninger for kildesortering. Informasjon om løsningen i din kommune finner du på www.sortere.no. Ved å holde produktet atskilt fra ordinært husholdningsavfall, hjelper du med å unngå potensiell negativ virkning på menneskers helse og miljøet. For mer informasjon, vennligst kontakt nærmeste IKEA-varehus. SUOMI Rastitettu jäteastiasymboli ilmaisee, että tuotetta ei saa hävittää kotitalousjätteen joukossa. Kun hävität tuotteen, vie se asianmukaiseen keräys- tai kierrätyspisteeseen. Huolehtimalla tällä merkillä varustetun laitteen asianmukaisesti kierrätykseen vähennät kaatopaikalle päätyvän jätteen määrää ja mahdollisia ympäristölle ja terveydelle aiheutuvia haittoja. Lisätietoja lähimmästä IKEA-tavaratalosta. SVENSKA Symbolen med den överkorsade soptunnan betyder att produkten ska kasseras separat från hushållsavfall. Produkten ska lämnas in för återvinning enligt lokala regler för avfallshantering. Genom att kassera en märkt produkt separat från hushållsavfallet bidrar du till att reducera mängden avfall som skickas till förbränning eller deponi och minimerar varje potentiell negativ påverkan på mänsklig hälsa och miljön. För mer information, vänligen kontakta ditt IKEA varuhus. ČESKY Symbol přeškrtnutého kontejneru označuje, že tento výrobek musí být likvidován odděleně od běžného domácího odpadu. Výrobek by měl být odevzdán k recyklaci v souladu s místními předpisy pro nakládání s odpadem. Oddělením označeného výrobku z komunálního odpadu, pomůžete snížit objem odpadů posílaných do spaloven nebo na skládku a minimalizovat případný negativní dopad na lidské zdraví a životní prostředí. Pro více informací, prosím, kontaktujte obchodní dům IKEA. ESPAÑOL La imagen del cubo de basura tachado indica que el producto no debe formar parte de los residuos habituales del hogar. Se debe reciclar según la normativa local medioambiental de eliminación de residuos. Cuando separas los productos que llevan esta imagen, contribuyes a reducir el volumen de residuos que se incineran o se envían a vertederos y minimizas el impacto negativo sobre la salud y el medio ambiente. Para más información, ponte en contacto con tu tienda IKEA. ITALIANO Il simbolo del cassonetto barrato indica che il prodotto non può essere eliminato con i comuni rifiuti domestici. Il prodotto dev’essere riciclato nel rispetto delle norme ambientali locali per lo smaltimento dei rifiuti. Separando un prodotto contrassegnato da questo simbolo dai rifiuti domestici, aiuterai a ridurre il volume dei rifiuti destinati agli inceneritori o alle discariche, minimizzando così qualsiasi possibile impatto negativo sulla salute umana e sull’ambiente. Per saperne di più, contatta il negozio IKEA più …

Text truncated - open the document above for the full version.

Request for Confidentiality Date: April 21, 2021 Subject: Confidentiality Request for: ___ (FCC ID: FHO-LED2029G4 )_____ Pursuant to FC C 47 CF R 0.457(d) and 0.459 and I C RSP-100, Section 12.4, the applicant requests tha t a par t of the subject FC C application be held confidential. Type of Confidentiality Requested Exhibit ☐Short Term☒Permanent Block Diagrams ☐Short Term External Photos ☐Short Term☐Permanent * 1 Internal Photos ☐Short Term☒Permanent Operation Description/Theory of Operation ☐Short Term☐Permanent Parts List & Placement/BOM ☐Short Term☐Permanent Tune-Up Procedure ☐Short Term☒Permanent Schematics ☐Short Term Test Setup Photos ☐Short Term☐Permanent * 3 User’s Manual IKEA of Sweden AB has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Perma nent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Ter m Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerel y, By: __________________________ ___________ Ivan Susak_______ (Signature/Title 3 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short -Term -Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. Team Manager /Laws & standards 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be

Authority to Act as Agent Date: February 4, 2021 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Intertek Shanghai is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: Dec 30, 2021 B y: __________________________ ________________________ (Signature 1 ) (Print name) T itle: __________________________ On behalf of: ____IKEA of Sweden AB_____ (Company Name) Telephone: __________________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. Ivan Susak Team Manager / Laws & standards +4647681000

FCC ID: FHO-LED2029G4 External Photos FCC ID: FHO-LED2029G4

Revision 1 Revision Comment No. of Changes Checked by Approved by Gaelle Pouleau (gapou2) Approved date 2021-02-09 Designed by IKEA of Sweden No. of Pages 1 (1) Replaces document Description ♦ ♦ _____________________________________________________________________________________ Name Marking LED2029G4 E26 NA 19972 Product Name Doc number 2281240 Template Version: 3.1 MARKING Marking_19972_LED2029G4_E26_NA 3 Marking position LED2029G4 E26 140lm 4.2W 120V~ 69mA 60Hz 1800K 33lm/W MADE IN CHINA 19972 YYWW IKEA of Sweden AB, SE-343 81 Älmhult FCC ID: FHO-LED2029G4

FCC ID: FHO-LED2029G4 Internal Photos FCC ID: FHO-LED2029G4

Serial No.LocationComponentsSpecificationManufacturer File No.Remark 1lampshadeGlass.Min thickness 0.3mmVarious Glass：high barium Various Internal wire：Brass Various Internal wire：iron Various 3LED SS-F13015-5002H-1880-S-ESN*1PCSSEOUL SEMICONDUCTOR Filament LED, Vf=130- 135V,If=20mA, Size:130*1.9*1.7mm 4the cooling gashigh purity helium+oxygenVarious 5 metal holder430 Stainless FeVarious Dongguan Casun Lighting Technology Co.,Ltd. Zhejiang Chenfeng Science And Technology Co., Ltd. PBT: 403M-G seriesNANTONG ZHONGLAN ENGINEER PLASTICS CO LTDE255317V0 130°C PBT: PBT-RG301 seriesKINGFA SCI & TECH CO LTDE171666V0 125°C PBT: 403M-G seriesNANTONG ZHONGLAN ENGINEER PLASTICS CO LTDE255317V0 130°C PBT: PBT-RG301 seriesKINGFA SCI & TECH CO LTDE171666V0 125°C Ø9.3x5.2 GuangdongCasun LightingTechnology Co.,Ltd. Ø9.35x5.2 ZHEJIANGCHENFENGSCIENCE ANDTECHNOLOGYCO.,LTD 10Internal wire3132Various AWM,min24AWG 150°C 300V 11Glue of lamp capAB-5-3HAINING YADONG ADHESIVE CO LTD130°C CB-TT-L,CB-TT-T,CB-TT-SCHANGYUAN ELECTRONICS GROUP CO LTDE180908 150V/ 300V/ 600V, 200°C, VW-1 TFT ，TFS GREAT HOLDING INDUSTRIAL CO LTDE156256 300V/ 600V, 200°C, VW- 1 TFTFLUO TECH INDUSTRIES CO LTDE175982 300V, 200°C, VW-1 W-01/W-02JIANGXI LEADFLY CIRCUIT CO LTD E333645 V0 130°C T1.0mm FW-4/FW-5/FW-5A SHENZHEN FAI WONG ELECTRONIC CO., LTDE171766 V0 130°C T1.0mm 139/140KEMBLE ELECTRONICS LTDE64353 V0 130°C T1.0mm RXF-1W 10ΩXIAMEN KOMING ELECTRONICS CO LTDE321729 RXF21-1W 10ΩANHUI CHANGSHENG ELECTRONICS CO LTDE306095 RXF 1W 10Ω DONGGUAN HONGDA ELECTRONIC TECHNOLOGY CO LTD E359590 RXF 1W 10ΩShenzhen Great Electronics Co.,LtdE301541 RXF21-1W 10ΩShenzhen Lanbao Anke Electronic CO LtdE482793 RXFR wkzm-x-yz RSFR-H SALIPT S-901-300 300V, 125°C, VW-1 SALIPT S-901-600 600V, 125°C, VW-1 HUANGFENG HTF-01 HUANGFENG HTF-2 300V, 125°C, VW-1 600V, 125°C, VW-1 QFR-h QIFURUI ELECTRONICS CO E225897 600V, 125°C, VW-1 T-2Dongguan Quantai Electronics Co.,LtdE227336 600V, 125°C, VW-1 15R1,R2resistor300K 1206Various 16R3,R4resistor27Ω~62Ω 0805Various 105°C 17C1electrolytic capacitor6.8uF/200VVarious 18BD1Bridge Rectifiers MB6FVarious SM2082Various BP5131Various E26 type, copper alloy with aminimum of 80 percent copper,stainless steel, aluminum unplatedor plated with nickel alloy, Copper alloy with a minimum of80 percent copper, stainless steel,aluminum unplated or plated withnickel alloy. 9 13 19U1IC 14F1 E26 screw base 12 isolation tubing of internal wiring insulation barrier DONGGUAN SALIPT CO LTDE209436 Fuse Resistor heat-shrinkable tubing PCB 600V, 125°C， VW-1 E236485 CHANGYUAN ELECTRONICS(SHENZHEN)CO.,LTD E26/24 insulator Screw contact 8 600V, 125°C, VW-1 7 6 SHENZHEN WOER HEAT-SHRINKABLE MATERIAL CO LTD E203950 E180908 DONG GUAN HUANG FENG INSULATION MATERIAL CO LTD CB-HFT Model: LED2029G4_NA 120V 60Hz 2core column 第 1 页，共 1 页

IKEA of Sweden AB TEST REPORT SCOPE OF WORK EMC TESTING– LED2029G4 REPORT NUMBER 210623109GZU-001 ISSUE DATE [REVISED DATE] 28 June 2021 [---------------------] PAGES 16 DOCUMENT CONTROL NUMBER FCC Part 15:2019-e © 2017 INTERTEK TEST REPORT Room 02, & 101/E201/E301/ E401/E501/E601/E701/E801 of Room 01 1-8/F., No. 7-2. Caipin Road, Science City, GETDD, Guangzhou, Guangdong, China Telephone: +86 20 8213 9688 Facsimile: +86 20 3205 7538 www.intertek.com.cn This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Room 02, & 101/E201/E301/E401/E501/E601/E701/E801 of Room 01 1-8/F., No. 7-2. Caipin Road, Science City, GETDD, Guangzhou, Guangdong, China Version: 02-April-2020 Page 2 of 16 FCC Part 15:2019-e Applicant Name & Address : IKEA of Sweden AB Box 702, SE-343 81 Älmhult, SWEDEN Manufacturing Site : Dongguan Kee Tat Lighting Limited Kai Shek Cheng DONGGUAN Guangdong Province 523000, China Intertek Report No: FCC ID: 210623109GZU-001 FHO-LED2029G4 Test standards CFR 47, FCC Part 15, Subpart B:2019 Sample Description Product : Self-ballasted LED lamp Model No. : LED2029G4 Electrical Rating : 120V, 60Hz, 4.2W, 69mA, E26 base. Serial No. Not Labeled Date Received : 04 December 2020 Date Test Conducted : 04 December 2020 to 25 February 2021 Prepared and Checked By Oscar Gao Project Engineer Approved By: Strong Yao Manager TEST REPORT Intertek Report No.: 210623109GZU-001 Version: 02-April-2020 Page 3 of 16 FCC Part 15:2019-e CONTENT TEST REPORT ....................................................................................................................... 1 CONTENT ......................................................................................................................... 3 1. TEST RESULTS SUMMARY ......................................................................................... 4 2. EMC RESULTS CONCLUSION...................................................................................... 5 3. LABORATORY MEASUREMENTS ................................................................................ 6 4. EQUIPMENT USED DURING TEST .............................................................................. 7 5. EMI TEST .................................................................................................................. 8 5.1 C ONDUCTED DISTURBANCE VOLTAGE AT MAINS PORTS ........................................................ 8 5.1.1 Block Diagram of Test Setup .............................................................................. 8 5.1.2 Test Setup and Procedure .................................................................................. 8 5.1.3 Limit ................................................................................................................... 9 5.1.4 Test Data and curve ......................................................................................... 10 5.2 R ADIATED EMISSION 30 MHZ -1000 MHZ...................................................................... 12 5.2.1 Block Diagram of Test Setup ............................................................................ 12 5.2.2 Test Setup and Procedure ................................................................................ 12 5.2.3 Limit ................................................................................................................. 13 5.2.4 Test Data and Curve ........................................................................................ 14 5.3 R ADIATED EMISSION ABOVE 1 GHZ ................................................................................. 16 6. PHOTO OF TEST SETUP AND EUT ............................................................................ 16 TEST REPORT Intertek Report No.: 210623109GZU-001 Version: 02-April-2020 Page 4 of 16 FCC Part 15:2019-e 1. TEST RESULTS SUMMARY Classification of EUT: Class B Test Item Standard Result Conducted disturbance voltage at mains ports CFR 47, FCC Part 15, Subpart B Pass Radiated emission (30 MHz–1 GHz) CFR 47, FCC Part 15, Subpart B Pass Radiated emission (Above 1 GHz) CFR 47, FCC Part 15, Subpart B N/A Remark: Reference publication is used for methods of measurement: ANSI C63.4:2014 Remark: 1. The symbol “N/A” in above table means Not Applicable. 2. When determining the test results, measurement uncertainty of tests has been considered. TEST REPORT Intertek Report No.: 210623109GZU-001 Version: 02-April-2020 Page 5 of 16 FCC Part 15:2019-e 2. EMC RESULTS CONCLUSION RE: EMC Testing Pursuant to FCC part 15 performed on the Self-ballasted LED lamp, Model: LED2029G4. We tested the Self-ballasted LED lamp, Model: LED2029G4 to determine if it was in compliance with the relevant standards as marked on the Test Results Summary. We found that the unit met the requirement of FCC part 15 standard when tested as received. The worst case’s test data was presented in this test report. The production units are required to conform to the initial sample as received when the units are placed on the market. TEST REPORT Intertek Report No.: 210623109GZU-001 Version: 02-April-2020 Page…

Text truncated - open the document above for the full version.

FCC ID: FHO-LED2029G4 Test Setup Photos FCC ID: FHO-LED2029G4 1. Radiated Emission 2. Conducted Emission