FSUGG000OBluetooth Adapter

ENGLISH 1 LED Display Pairing Blue LED flashes quickly Paired Blue LED flashes slowly AUX IN, BT standby Blue LED flashes slowly Charging Red LED on, then turns off when fully charged Battery Low Red LED flashes slowly (see Battery recharging) Bluetooth Pairing 1.After you have connected your headphone or speaker cable to the BT-100R, you can turn on the BT-100R by switching the slide switch to “On” and the blue LED will flash slowly. When it ENGLISH 2 starts to flash quickly, this means it is entering pairing mode. 2.When you activate your device's Bluetooth function, it will begin to search for the device. You will find “Genius BT-100R” on your device's Bluetooth list and then you can connect it. 3.When pairing is successful, the blue LED will flash slowly. Note 1: Most devices do not require you to key in the pin code. If a pin code is required, key in “0000”. Battery recharging If the lithium battery is low and requires charging, just attach the USB cable to the receiver and your PC/notebook. Bluetooth music receiver connects wired speakers/headphone to Bluetooth music devices ENGLISH 3 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to ENGLISH 4 radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: _ Reorient or relocate the receiving antenna. _ Increase the separation between the equipment and receiver. _ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. _ Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause ENGLISH 5 undesired operation. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions – The safety and operating instructions should be retained for future reference. 3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions – All operating and use instructions should be followed. 5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Only use attachments/accessories specified by the manufacturer. 10. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION： Danger of explosion if battery is incorrectly replaced. Replace only ENGLISH 6 with the same or equivalent type. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

Date: May/31/2012 Federal Communications Commission Authorization and Evaluation Division FCC ID: FSUGG000O Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this application as outlined below: 1. Block diagram 2. Schematics 3. Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might to harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the grant for this application. Sincerely, Name：P.C. Lee Company name: KYE SYSTEMS CORP. Tel.：886-2-29956645 Fax：886-2-29955302

AGENCY AUTHORIZATION LETTER FCC ID:FSUGG000O Date: May/31/2012 To whom it may concern: We, the undersigned, hereby authorize Bureau Veritas Shenzhen Co. Ltd Dongguan Branch., to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BVDG within the scope of this authorization shall have the same effects as our own. This authorization shall expire 6 months form original date. If you have any Questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely, Name ：P.C. Lee Company name: KYE SYSTEMS CORP. Tel. ：886-2-29956645 Fax ：886-2-29955302

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 3 Report Version 1 Reference No.: 120528N002 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 3 Report Version 1 Reference No.: 120528N002 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 3 Report Version 1 Reference No.: 120528N002

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 2 Report Version 1 Reference No.: 120528N002 PHOTOGRAPHS OF THE EUT ANT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 2 Report Version 1 Reference No.: 120528N002

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 on 32 Report Version 1 Test Report No.:FC120528N002 TEST REPORT Applicant: KYE SYSTEMS CORP. Address: No. 492, Sec. 5, Chongxin Rd. Sanchong Dist., New Taipei City 24160 Taiwan(R.O.C.) Manufacturer or Supplier Shenzhen 3nod Electronics Co., Ltd Address 3NOD High-Tech Park 15# Zhongfu Road Tangxiayong Village, Industrial Zone Songgang Town, Baoan District, Shenzhen City, China. Product: BT Receiver Brand Name: Model: BT-100R Additional Model & Model Difference N/A Date of tests: May 28 ~ June 25, 2012 the tests have been carried out according to the requirements of the following standards: FCC Part 15, Subpart C (Section 15.249) CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Glyn He Project Engineer / EMC Department Approved by Sam Tung Manager / EMC Department Date: June 25, 2012 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 on 32 Report Version 1 Test Report No.:FC120528N002 TABLE OF CONTENTS RELEASE CONTROL RECORD........................................................................................................3 1 SUMMARY OF TEST RESULTS.................................................................................................4 2 MEASUREMENT UNCERTAINTY .............................................................................................. 4 3 GENERAL INFORMATION.........................................................................................................5 3.1 GENERAL DESCRIPTION OF EUT ...................................................................................... 5 3.2 DESCRIPTION OF TEST MODES ........................................................................................ 6 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................................... 7 3.4 DESCRIPTION OF SUPPORT UNITS................................................................................... 7 4. TEST TYPES AND RESULTS................................................................................................8 4.1 CONDUCTED EMISSION MEASUREMENT ................................................................. 8 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .............................................. 8 4.1.2 TEST INSTRUMENTS .................................................................................................... 8 4.1.3 TEST PROCEDURES..................................................................................................... 9 4.1.4 DEVIATION FROM TEST STANDARD........................................................................... 9 4.1.5 TEST SETUP ................................................................................................................ 10 4.1.6 EUT OPERATING CONDITIONS ................................................................................. 10 4.1.7 TEST RESULTS............................................................................................................ 11 4.2 RADIATED EMISSION MEASUREMENT .................................................................... 13 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.................................................. 13 4.2.2 TEST INSTRUMENTS .................................................................................................. 14 4.2.3 TEST PROCEDURES................................................................................................... 15 4.2.4 DEVIATION FROM TEST STANDARD......................................................................... 15 4.2.5 TEST SETUP ................................................................................................................ 16 4.2.6 EUT OPERATING CONDITIONS ................................................................................. 16 4.2.7 TEST RESULTS............................................................................................................ 17 4.3 20dB BANDWIDTH MEASUREMENT.......................................................................... 22 4.3.1 LIMITS OF 20dB BANDWIDTH MEASUREMENT ....................................................... 22 4.3.2 TEST INSTRUMENTS .................................................................................................. 22 4.3.3 TEST PROCEDURE ....................................…

Text truncated - open the document above for the full version.

1 Set-up for radiated emission test <Frequency Range 30MHz~1GHz> <Frequency Range above 1GHz> 2 Set-up for conducted emission test