
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
ENGLISH 1 Federal Communications Commission (FCC) Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installations, if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient / Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that the receiver is connected. 4. Consult the dealer or an experienced radio / TV technician for help. CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. Disclaimer The following does not apply to any country where such provisions are inconsistent with local law: KYE Systems Corp. makes no warranties with respect to this documentation, whether expressed or implied. All material is provided “as is”. This includes, but is not limited to, any implied warranties of merchantability and fitness is for a particular purpose. The information covered in this document is subject to change without notice. KYE Systems Corp. assumes no responsibility for any errors that may appear in this document. All brand names mentioned in this manual are trademarks or registered trademarks of their respective companies. Copyright © 2007 KYE Systems Corp. All rights reserved. ENGLISH 2 Hardware Installation 1. You can connect the receiver to a USB port of a PC 2. Install two AAA batteries in the KeyBoard 3. Turn on your computer. The mouse will now work. Warning: (Troubleshooting) 1. Please do not use wireless optical mouse on a desk which is made of glass, mirror, iron, or black velvet. Also, a flat surface is necessary or the optical sensor will be error easily. When you use wireless optical mouse on a desk that is made of metal, try using a pad and reduce the receiving distance. 2. The wireless optical mouse channel provides 256 ID-codes, and it automatically selects the ID # for your mouse. You can only set up one wireless optical mouse at a time. But if you have additional wireless optical mouse sets in an area of 10 square meters, more interference will occur between the receiver and your mouse. ENGLISH 3 3. If you feel the mouse does not move smooth as usual, then the batteries have lost their charge and need to be replaced. Remember do not put the batteries in the wrong direction. 4. If the mouse does not have connection to the receiver, press the button on the receiver first and then press the button under the mouse for channel setting again. Factory Setting 1. Left Button: Provides traditional mouse functions like click, double click and drag. 2. Right Button: Provides traditional mouse click functions. 3. Magic-Roller: Press the “Magic-Roller” to surf the Internet and Windows documents. Notes on Battery Usage When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: ■ Different battery types and surrounding temperatures may affect the battery performance. ■ Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and reduce wireless device performance. ■ If you are using a new rechargeable battery or rechargeable battery that has not been used for an extended period of time (batteries that pass the expiry date are exceptions) it might affect the period of time you can use this device. Therefore, to maximize their performance and lifetime, we recommend that you fully charge the batteries and discharge them for at least one complete cycle before use. ■ The battery may feel warm when using the wireless device for an extended period of time. This is normal and not a malfunction. ENGLISH 4 ■ The wireless device may feel warm when being used continuously or for an extended period of time. This is normal and not a malfunction. ■ If you will not be using the batteries for an extended period of time, remove them from the wireless device to prevent leakage or corrosion. ■ Always keep the terminals in a clean state. ■ Never use manganese batteries. ■ Risk of explosion if battery is replaced by an incorrect type. ■ Dispose of used batteries according to the instructions.
KYE SYSTEMS CORP. (Genius) No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R. O. C. Tel : 886-2-2995-6645#3399 Federal Communications Commission Apr. 11, 2008 Authorization and Evaluation Division ATTESTATION FCC ID: FSUGKZH7 Product: Slim Star 620 Laser, Slim Star 720 Laser Model: GK-070015, GK-070016 We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, --------------------------------------------------- Ming Huang Lee / Section Supervisor KYE SYSTEMS CORP. (Genius)
KYE SYSTEMS CORP. (Genius) FCC ID.: FSUGKZH7 No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R. O. C. Tel : 886-2-2995-6645#3399 KYE SYSTEMS CORP. (Genius) No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R. O. C. Tel : 886-2-2995-6645#3399 Fax: 886-2-2278-9520 Federal Communications Commission Apr. 11, 2008 Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: (GK-070015, GK-070016) Schematics, (GK-070015, GK-070016) Block Diagram The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ---------------------------------------------------- Ming Huang Lee / Section Supervisor KYE SYSTEMS CORP. (Genius)
Report No.: 082245R-RFUSP03V01 Page : 1 of 7 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (GK-070015) (2) EUT Photo (GK-070015) Report No.: 082245R-RFUSP03V01 Page : 2 of 7 (3) EUT Photo (GK-070016) (4) EUT Photo (GK-070016)
KYE SYSTEMS CORP. (Genius) No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R. O. C. Tel : 886-2-2995-6645#3399 FCC ID Label KYE SYSTEMS CORP. (Genius) No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R. O. C. Tel : 886-2-2995-6645#3399 The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below.
Report No.: 082245R-RFUSP03V01 Page : 3 of 7 (5) EUT Photo (6) EUT Photo Report No.: 082245R-RFUSP03V01 Page : 4 of 7 (7) EUT Photo (8) EUT Photo Report No.: 082245R-RFUSP03V01 Page : 5 of 7 (9) EUT Photo (10) EUT Photo Report No.: 082245R-RFUSP03V01 Page : 6 of 7 (11) EUT Photo (12) EUT Photo Report No.: 082245R-RFUSP03V01 Page : 7 of 7 (13) EUT Photo
Report No. 082245R-RFUSP03V01 Page : 5 of 21 1.2. Operational Description The EUT is a Slim Star 620 Laser, Slim Star 720 Laser used in household and office PC system. The number of the channels is 1 in 27.145MHz. The device adapts FSK modulation. The Printed antenna provides diversity function to improve the transmitting function.
Report No. 082245R-RFUSP03V01 Page : 1 of 21 Test Report Product Name Slim Star 620 Laser, Slim Star 720 Laser Model No. GK-070015, GK-070016 FCC ID. FSUGKZH7 Applicant KYE SYSTEMS CORP. (Genius) Address No.492 Sec.5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R.O.C. Date of Receipt Feb. 21 2008 Issued Date Mar. 19, 2008 Report No. 082245R-RFUSP03V01 Version V1.0 The Test Results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 082245R-RFUSP03V01 Page : 2 of 21 Test Report Certification Test Date: Mar. 19, 2008 Report No.: 082245R-RFUSP03V01 Product Name Slim Star 620 Laser, Slim Star 720 Laser Applicant KYE SYSTEMS CORP. (Genius) Address No.492 Sec.5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R.O.C. Manufacturer KYE SYSTEMS CORP. (Genius) Model No. GK-070015, GK-070016 FCC ID. FSUGKZH7 Rated Voltage AC 120V/60Hz EUT Working Voltage DC 3V(Power By Battery) Trade Name Genius Applicable Standard FCC CFR Title 47 Part 15 Subpart C: 2007 ANSI C63.4: 2003 CISPR 22: 2005 Test Result Complied The Test Results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Documented By : ( Adm. Specialist / Genie Chang ) Tested By : (Engineer / Molin Huang) Approved By : ( Deputy Manager / Vincent Lin) Report No. 082245R-RFUSP03V01 Page : 3 of 21 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION.......................................................................................................4 1.1. EUT Description..........................................................................................................................4 1.2. Operational Description.............................................................................................................5 1.3. Test System Details....................................................................................................................6 1.4. Configuration of Test System....................................................................................................6 1.5. EUT Exercise Software..............................................................................................................6 1.6. Test Facility..................................................................................................................................7 2. Conducted Emission...............................................................................................................8 2.1. Test Equipment...........................................................................................................................8 2.2. Test Setup....................................................................................................................................8 2.3. Limits.............................................................................................................................................8 2.4. Test Procedure............................................................................................................................9 2.5. Uncertainty...................................................................................................................................9 2.6. Test Data of Conducted Emission............................................................................................9 3. Radiated Emission.................................................................................................................10 3.1. Test Equipment.........................................................................................................................10 3.2. Test Setup..................................................................................................................................10 3.3. Limits...........................................................................................................................................11 3.4. Test Procedure..........................................................................................................................12 3.5. Uncertainty.................................................................................................................................12 3.6. Test Data of Radiated Emission.............................................................................................13 4. Band Edge................................................................................................................................16 4.1. Test Equipment.........................................................................................................................16 4.2. Test Setup..................................................................................................................................16 4.3. Limit............................................................................................................................................17 4.4. Test Procedure..........................................................................................................................17 4.5. Test Result of Band Edge........................................................................................................18 5. EMI Reduction Method During Compliance Testing.....................................................19 Attachment 1: EUT Test Photographs Attachment 2: EUT Detailed Photographs Report No. 082245R-RFUSP03V01 Page : 4 of 21 1. GENERAL INFORMATION 1.1. EUT Description Product Name Slim Star 620 Laser, Slim Star 720 Laser Trade Name Genius FCC ID. FSUGKZH7 Model No. GK-070015, GK-070016 EUT Working Voltage DC 3V(Power By Battery) Frequency …
Text truncated - open the document above for the full version.
Report No.: 082245R-RFUSP03V01 Page : 1 of 2 Attachment 1: EUT Test Setup Photographs Front View of Radiated Test Back View of Radiated Test Report No.: 082245R-RFUSP03V01 Page : 2 of 2 Front View of Radiated Test (Loop) Back View of Radiated Test (Loop)
No. 5-22, Ruei-Shu Valley,Ruei-Ping Tsuen, Lin-Kou · Taipei · Taiwan
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 27.145 MHz - 27.145 MHz | - |

Wireless Speaker
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Wireless Keyboard
Equipment Class
DXX - Part 15 Low Power Communication Device TransmitterWireless Mouse
Equipment Class
DTS - Digital Transmission SystemWireless Mouse
Equipment Class
DXX - Part 15 Low Power Communication Device TransmitterWireless Mouse
Equipment Class
DTS - Digital Transmission System