FSUGMZI9Wireless Mouse

ENGLISH 1 \Hardware Installation • Connect the USB keyboard and USB receiver to your PC (USB port). • Install two AAA batteries in the mouse. USB Hub notice Numpad C600 provides a two-port USB Hub 2.0. You can plug an appropriate USB device into a USB port on the keyboard. Before you start • The USB port on this keyboard is a “high power, bus-powered device”, not a “self-powered device”; that is the electrical power of this keyboard is supplied by the host computer, not by itself. If the PC system power does not supply 5V and 500mA for the USB port or USB HUB of BUS POWER, it might not be available. • USB Hubs have additional ports that let you connect multiple devices together. In general, you can connect up to two individual USB peripherals at one time in a PC system, like a mouse, joystick, etc. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. RF exposure warning · This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

RF_160, Issue 01 Declaration of Authorization We Name: KYE SYSTEMS CORP. (Genius) Address: No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R. O. C. City: Taipei ............................................................... . Country: Taiwan ... R.O.C. ........................................................................ . Declare that: Name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan R.O.C. is authorized to apply for Certification of the following product(s): Product description: Numpad C600 ..................... . Type designation: GK-070021/T ..................... . Trademark: Genius ..................... . on our behalf. Date: ...... 2008/02/20 ..................... . ...... . City: ..................... ... .................. .. ......... Name: ... Ming Huang Lee / Section Supervisor ... Signature: .........................................................

KYE SYSTEMS CORP. (Genius) FCC ID.: FSUGMZI9 No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R. O. C. Tel : 886-2-2995-6645#3399 KYE SYSTEMS CORP. (Genius) No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R. O. C. Tel : 886-2-2995-6645#3399 Fax: 886-2-2278-9520 Federal Communications Commission Feb. 20, 2008 Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: Schematics: (GK-070021) Schem Block Diagram: (GK-070021) BlkDia The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ---------------------------------------------------- Ming Huang Lee / Section Supervisor KYE SYSTEMS CORP. (Genius)

KYE SYSTEMS CORP. (Genius) FCC ID.: FSUGMZI9 No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R. O. C..Tel : 886-2-2995-6645#3399 Federal Communications Commission Feb. 20, 2008 Authorization and Evaluation Division ATTESTATION FCC ID: FSUGMZI9 Product: Numpad C600 Model: GK-070021/T We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, ---------------------------------------------------- Ming Huang Lee / Section Supervisor KYE SYSTEMS CORP. (Genius)

Report No.: 081030R-RFUSP03V01 Page : 1 of 5 Version:1.0 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo

KYE SYSTEMS CORP. (Genius) FCC ID.: FSUGMZI9 No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R. O. C..Tel : 886-2-2995-6645#3399 FCC ID Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below.

Report No.: 081030R-RFUSP03V01 Page : 2 of 5 Version:1.0 (3) EUT Photo (4) EUT Photo Report No.: 081030R-RFUSP03V01 Page : 3 of 5 Version:1.0 (5) EUT Photo (6) EUT Photo Report No.: 081030R-RFUSP03V01 Page : 4 of 5 Version:1.0 (7) EUT Photo (8) EUT Photo Report No.: 081030R-RFUSP03V01 Page : 5 of 5 Version:1.0 (9) EUT Photo (10) EUT Photo

Report No. 081030R-RFUSP03V01 Page : 5 of 23 Version:1.0 1.2. Operational Description The EUT is a Numpad C600 used in household and office PC system. The number of the channels is 1 in 27.042MHz. The device adapts FSK modulation. The Printed antenna provides diversity function to improve the transmitting function.

Report No. 081030R-RFUSP03V01 Page : 1 of 23 Version:1.0 Te s t R e p o r t Product Name Numpad C600 Model No. GK-070021/T FCC ID. FSUGMZI9 Applicant KYE SYSTEMS CORP. (Genius) Address No.492 Sec.5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R.O.C. Date of Receipt Dec. 31 2007 Issued Date Jan. 10, 2008 Report No. 081030R-RFUSP03V01 The Test Results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 081030R-RFUSP03V01 Page : 2 of 23 Version:1.0 Test Report Certification Test Date: Jan. 10, 2008 Report No.: 081030R-RFUSP03V01 Product Name Numpad C600 Applicant KYE SYSTEMS CORP. (Genius) Address No.492 Sec.5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R.O.C. Manufacturer KYE SYSTEMS CORP. (Genius) Model No. GK-070021/T FCC ID. FSUGMZI9 Rated Voltage AC 120V/60Hz EUT Working Voltage DC 3V Trade Name Genius Applicable Standard FCC CFR Title 47 Part 15 Subpart C: 2007 ANSI C63.4: 2003 CISPR 22: 2005 Test Result Complied The Test Results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Documented By : ( Adm. Specialist / Leven Huang ) Tested By : (Engineer/Dino Chen) Approved By : ( Deputy Manager / Vincent Lin) 註解[u1]: Refe ”TestDate” 註解[u2]: Refer “RptNo” 註解[u3]: 註解[u4]: Refer “Applicant” 註解[u5]: Refer ”ApplyAAdress” 註解[u6]: Refer “Applicant” 註解[u7]: Model 註解[u8]: FCCID 註解[u9]: Refer “Model” Report No. 081030R-RFUSP03V01 Page : 3 of 23 Version:1.0 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION.......................................................................................................4 1.1. EUT Description..........................................................................................................................4 1.2. Operational Description.............................................................................................................5 1.3. Test System Details....................................................................................................................6 1.4. Configuration of Test System....................................................................................................6 1.5. EUT Exercise Software..............................................................................................................6 1.6. Test Facility..................................................................................................................................7 2. Conducted Emission...............................................................................................................8 2.1. Test Equipment...........................................................................................................................8 2.2. Test Setup....................................................................................................................................8 2.3. Limits.............................................................................................................................................8 2.4. Test Procedure............................................................................................................................9 2.5. Uncertainty...................................................................................................................................9 2.6. Test Data of Conducted Emission............................................................................................9 3. Radiated Emission.................................................................................................................10 3.1. Test Equipment.........................................................................................................................10 3.2. Test Setup..................................................................................................................................10 3.3. Limits...........................................................................................................................................11 3.4. Test Procedure..........................................................................................................................12 3.5. Uncertainty.................................................................................................................................12 3.6. Test Data of Radiated Emission.............................................................................................13 4. Band Edge................................................................................................................................18 4.1. Test Equipment.........................................................................................................................18 4.2. Test Setup..................................................................................................................................18 4.3. Limit............................................................................................................................................19 4.4. Test Procedure..........................................................................................................................19 4.5. Test Result of Band Edge........................................................................................................20 5. EMI Reduction Method During Compliance Testing.....................................................21 Attachment 1: EUT Test Photographs Attachment 2: EUT Detailed Photographs Report No. 081030R-RFUSP03V01 Page : 4 of 23 Version:1.0 1. GENERAL INFORMATION 1.1. EUT Description Product Name Numpad C600 Trade Name Genius FC…

Text truncated - open the document above for the full version.

Report No.: 081030R-RFUSP03V01 Page : 1 of 2 Version:1.0 Attachment 1: EUT Test Setup Photographs Front View of Radiated Test Back View of Radiated Test Report No.: 081030R-RFUSP03V01 Page : 2 of 2 Version:1.0 Front View of Radiated Test (Loop) Back View of Radiated Test (Loop)