FSUGMZJFMEDIA POINTER 1000

English 1 How to use the Presenter: 1. Insert two AAA batteries into the Media Pointer. 2. Plug the receiver unit into a USB port. (Media Pointer 1000 has been factory preset). Media Pointer features: 1. Power switch and mode switch. (P for presenter mode; M for media mode). 2. The mini receiver can be stored inside the Media Pointer for easy storage. Button Functions: LCD Screen: The LCD screen shows the time left and battery life. The maximum time display is 9 hours and 59 minutes (1). Hours: Select between 0-9 (2). Second: blinks once every second (3). Minutes: Select between 00-59 (4). Battery life: Change new batteries when the battery icon is empty. Time management function: 1. Press Time management button for three seconds to enter time-setting. 2. Set your ideal hours / minutes by using the Time down (-) or up (+) button. When finished, press the time management button again for three seconds to exit time-setting. 3. To start the time count down, press “Time Management” button again. 4. When time has 30 seconds left, the media pointer will have vibration for remaindering your timeline control, when the allotted time is up, it will vibrate three times. Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. (15.21) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.(15.19(a)(3)) Presenter mode Media mode 1 B B l l a a n n k k S S c c r r e e e e n n V V o o l l u u m m e e U U p p 2 E E s s c c / / F F 5 5 V V o o l l u u m m e e D D o o w w n n 3 P P a a g g e e U U p p P P r r e e v v i i o o u u s s T T r r a a c c k k 4 P P a a g g e e D D o o w w n n N N e e x x t t T T r r a a c c k k 5 S S w w i i t t c c h h M M o o d d e e S S w w i i t t c c h h M M o o d d e e 6 L L a a s s e e r r b b e e a a m m L L a a s s e e r r b b e e a a m m 7 T T i i m m e e d d o o w w n n R R e e w w i i n n d d 8 T T i i m m e e M M a a n n a a g g e e m m e e n n t t P P l l a a y y / / P P a a u u s s e e 9 T T i i m m e e U U p p F F a a s s t t f f o o r r w w a a r r d d

KYE SYSTEMS CORP. November 23, 2010 Federal Communications Commission Authorization and Evaluation Division Dear Regulatory Authority, We, the undersigned, hereby declare that FCC Part 15B Declaration of Conformity procedures will be applied to the digital device portion of the following product: Type: Media Pointer 1000 Model: GM-100015/T FCC Part 15B DoC report number: F0O0401 This Device complies with Part 15B DoC of the FCC rules, operation is subject to the following two conditions. This device may not cause harmful interference and, This device must accept any interference received, Including interference that may cause undesired operation TEST LABORATORY Global Certification Corp. No. 146, Shiang Charng Rd., Sec. 2, Hsi Chih, Taipei Hsien 221, Taiwan, R.O.C. Accredited Lab. Assigned under FCC number: TW1030 Sincerely, Ping Chun Lee, Engineer KYE SYSTEMS CORP.

Global Certification Corp. PHOTO OF EUT PHOTOS OF EUT Global Certification Corp. Report No. : 0O0401 PHOTO OF EUT PHOTO OF EUT : 1 of 3 Front View of EUT Rear View of EUT

Label location

Global Certification Corp. Report No. : 0O0401 PHOTO OF EUT PHOTO OF EUT : 2 of 3 Inside View of EUT Global Certification Corp. Report No. : 0O0401 PHOTO OF EUT PHOTO OF EUT : 3 of 3 Component Side of Main Board -1 Component Side of Main Board -1

Global Certification Corp. Date of Issue: Nov. 10,2010 Report No:F0O0401 Page1/29 FCC 47 CFR PART 15 SUBPART C TEST REPORT FOR Product Name: Media Pointer 1000 Model : GM-100015/T Trade Name: Genius Issued to KYE SYSTEMS CORP. No.492,Sec.5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R.O.C. Issued by Global Certification Corp. EMI Test Site Sansia Lab NO.34-3,Zihhe Rd.,Sansia Township,Taipei County 237, Taiwan ,R.O.C. EMC Test Site Sijhih office and Lab No. 146. Sec.2. Siangjhang Rd. Sijhih City. Taipei County 221, Taiwan(R.O.C.) Note: This test refers exclusively to the test presented test model and sample. This report shall not be reproduced except in full, without the written approval of Global Certification Corporation. This document may be altered or revised by Global Certification Corporation. Personnel only, and shall be noted in the revision section of the document. Global Certification Corp. Date of Issue: Nov. 10,2010 Report No:F0O0401 Page2/29 TABLE OF CONTENTS ----------------------------------------------------------------------------------------------------- 2 1. GENERAL INFORMATION -------------------------------------------------------------------------------------------------------- 3 1.1 DESCRIPTION OF THE TESTED SAMPLES----------------------------------------------------------------------------------------------- 4 2. TEST METHODOLOGY ------------------------------------------------------------------------------------------------------------- 5 2.1 GENERAL TEST PROCEDURES --------------------------------------------------------------------------------------------------- 5 2.2 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS ----------------------------------------------------------------- 5 2.3 DESCRIPTION OF TEST MODES -------------------------------------------------------------------------------------------------- 6 2.4 DESCRIPTION OF THE SUPPORT EQUIPMENTS ----------------------------------------------------------------------------- 7 3. TEST AND MEASUREMENT EQUIPMENT ----------------------------------------------------------------------------------- 9 3.1 CALIBRATION----------------------------------------------------------------------------------------------------------------------- 9 3.2 EQUIPMENT-------------------------------------------------------------------------------------------------------------------------- 9 4. SECTION 15.249 REQUIREMENTS (FUNDAMENTAL/ HARMONICS) ----------------------------------------------10 4.1 TEST SETUP------------------------------------------------------------------------------------------------------------------------10 4.2 LIMIT-------------------------------------------------------------------------------------------------------------------------------10 4.3 RESULT: PASSED --------------------------------------------------------------------------------------------------------------10 4.4 TEST DATA: ------------------------------------------------------------------------------------------------------------------------10 5. SECTION 15.205 REQUIREMENTS (BAND EDGE)-------------------------------------------------------------------------19 5.1 TEST SETUP------------------------------------------------------------------------------------------------------------------------19 5.2 LIMIT-------------------------------------------------------------------------------------------------------------------------------19 5.3 RESULT: PASSED --------------------------------------------------------------------------------------------------------------20 5.4 TEST DATA: ------------------------------------------------------------------------------------------------------------------------20 6. SECTION 15.209 REQUIREMENTS (GENERAL RADIATED EMISSION) -------------------------------------------24 6.1 TEST SETUP------------------------------------------------------------------------------------------------------------------------24 6.2 LIMIT-------------------------------------------------------------------------------------------------------------------------------25 6.3 TEST PROCEDURE-----------------------------------------------------------------------------------------------------------------26 6.4 RESULT: PASSED ----------------------------------------------------------------------------------------------------------------26 6.5 TEST DATA: ------------------------------------------------------------------------------------------------------------------------27 7. SECTION 15.207 REQUIREMENTS (POWERLINE CONDUCTED EMISSIONS) ----------------------------------29 APPENDIX 1 PHOTOS OF TEST CONFIGURATION APPENDIX 3 PHOTOS OF EUT Global Certification Corp. Date of Issue: Nov. 10,2010 Report No:F0O0401 Page3/29 1. GENERAL INFORMATION Applicant :KYE SYSTEMS CORP. Address :No.492,Sec.5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R.O.C. Manufacturer :KYE SYSTEMS CORP. Address :No.492,Sec.5, Chung Hsin Rd., San Chung, Taipei Hsien, 24160, Taiwan, R.O.C. EUT : Media Pointer 1000 Model Name :GM-100015/T Model Differences :N/A Is here with confirmed to comply with the requirements set out in the FCC Rules and Regulations Part 15 Subpart C and the measurement procedures were according to ANSI C63.4-2003. The said equipment in the configuration described in this report shows the maximum emission levels emanating from equipment are within the compliance requirements. FCC part 15 subpart C Receipt Date : 10/04/2010 Final Test Date : 11/10/2010 Taipei, Taiwan Nov. 10, 2010 Alex Chou / Manager (Place) (Date) (Signature) Designation Number: TW1030 Global Certification Corp. Date of Issue: Nov. 10,2010 Report No:F0O0401 Page4/29 1.1 DESCRIPTION OF THE TESTED SAMPLES EUT Name : Media Pointer 1000 Model Number : GM-100015/T FCC ID : FSUGMZJF Input Voltage : 3Vdc Power From Inside Outside Adaptor BATTERY AC Power Source DC Power Source Support Unit PC Operate Frequency : Refer to the channel list as described below Modulation Technique : G…

Text truncated - open the document above for the full version.

Global Certification Corp. Appendix 1 PHOTOS OF TEST CONFIGURATION Global Certification Corp. Report No. : F0O0401 Appendix 1 : 1 of 1