FSUKK0022.4GHz Wireless Keyboard

KYE 2.4GHz Wireless Keyboard / K7910 ENGLISH 1 Hardware Installation 1. Install two AAA batteries into the RF keyboard, and close the battery cover. 2. Plug in your USB receiver to a USB port of your PC. ID Channel Setting and connection: Follow these steps: 1. Plug in your USB receiver to a USB port of your PC and wait about 5-10 seconds. 2. The connection will be executed and the kit will be ready for use. KYE 2.4GHz Wireless Keyboard / K7910 ENGLISH 2 Ch # Frequency Ch # Frequency Ch # Frequency Ch # Frequency 1 2.402 21 2.422 41 2.442 61 2.462 2 2.403 - 22 2.423 42 2.443 62 2.463 3 2.404 23 2.424 43 2.444 63 2.464 4 2.405 24 2.425 44 2.445 64 2.465 5 2.406 25 2.426 45 2.446 65 2.466 6 2.407 26 2.427 46 2.447 66 2.467 7 2.408 27 2.428 47 2.448 67 2.468 8 2.409 28 2.429 48 2.449 68 2.469 9 2.410 29 2.430 49 2.450 69 2.470 10 2.411 30 2.431 50 2.451 70 2.471 11 2.412 31 2.432 51 2.452 71 2.472 12 2.413 32 2.433 52 2.453 72 2.473 13 2.414 33 2.434 53 2.454 73 2.474 14 2.415 34 2.435 54 2.455 74 2.475 15 2.416 35 2.436 55 2.456 75 2.476 16 2.417 36 2.437 56 2.457 76 2.477 17 2.418 37 2.438 57 2.458 77 2.478 18 2.419 38 2.439 58 2.459 78 2.479 19 2.420 39 2.440 59 2.460 79 2.480 20 2.421 40 2.441 60 2.461 KYE 2.4GHz Wireless Keyboard / K7910 ENGLISH 3 Replace Batteries If the keyboard does not work properly, then the batteries have lost their charge, so you need to replace them. Warning: do not mix or use different types of batteries at the same time. “Warning (Trouble shooting) 1. In case the wireless device was not connected when you set the ID channel setting, check if you have installed the batteries with the positive (+) and negative (-) polarity in the correct position, then repeat the ID channel setting again. 2. For optimum performance, please make sure that the distance between the wireless device and the micro dongle receiver does not exceed 10M. Keyboard hot key definition Play & Pause Volume down Volume up KYE 2.4GHz Wireless Keyboard / K7910 ENGLISH 4 Notes on Battery Usage When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below:
Different battery types and surrounding temperatures may affect the battery performance.
Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and reduce wireless device performance.
If you are using a new rechargeable battery or rechargeable battery that has not been used for an extended period of time (batteries that pass the expiry date are exceptions) it might affect the period of time you can use this device. Therefore, to maximize their performance and lifetime, we recommend that you fully charge the batteries and discharge them for at least one complete cycle before use.
The battery may feel warm when using the wireless device for an extended period of time or using the flash continuously. This is normal and not a malfunction.
The wireless device may feel warm when being used continuously or for an extended period of time. This is normal and not a malfunction.
If you will not be using the batteries for an extended period of time, remove them from the wireless device to prevent leakage or corrosion.
Always keep the terminals in a clean state.
Never use manganese batteries.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions. KYE 2.4GHz Wireless Keyboard / K7910 ENGLISH 5 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

昆盈企業股份有限公司 KYE SYSTEMS CORP. No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei Hsien, 241, Taiwan, R.O.C. Tel: 866-2-29956645 Fax: 866-2-29956649 Date: August 5, 2010 FCC ID: FSUKK002 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Scotte Tsou/ EMC&Safety Engineer KYE SYSTEMS CORP. Tel: +886-2-2995-6645 Fax: +886-2-2995-5302 E-mail: [email protected]

昆盈企業股份有限公司 KYE SYSTEMS CORP. No. 492, Sec. 5, Chung Hsin Rd., San Chung, Taipei Hsien, 241, Taiwan, R.O.C. Tel: 866-2-29956645 Fax: 866-2-29956649 AGENCY AUTHORIZATION LETTER Date: August 5, 2010 To whom it may concern: We, the undersigned, KYE SYSTEMS CORP., hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) to act on our behalf in all matters relating to all processes required in the FCC Part 15C. Any and all acts carried out by BV CPS Taoyuan Branch on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, Scotte Tsou/ EMC&Safety Engineer KYE SYSTEMS CORP. Tel: +886-2-2995-6645 Fax: +886-2-2995-5302 E-mail: [email protected]

Page 1/1

Page 1 CONSTRUCTION PHOTOS OF EUT

Label Location

Page 2 Page 3 Page 4

FCC ID: FSUKK002 Report No.: RF990804C13 Operational Description The transmitter of the EUT (2.4GHz Wireless Keyboard) is powered by 3Vdc from battery. The antenna is PCB antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: RF990804C13 1 Report Format Version 3.0.1 FCC TEST REPORT REPORT NO. :RF990804C13 MODEL NO. :K7910 FCC ID:FSUKK002 RECEIVED :Aug. 04, 2010 TESTED :Aug. 06 ~ Aug. 10, 2010 ISSUED :Aug. 12, 2010 APPLICANT : KYE SYSTEMS CORP. ADDRESS : NO. 492, SEC. 5, CHUNG HSIN RD., SAN CHUNG, TAIPEI HSIEN, 241, TAIWAN, R.O.C. ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION : No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 24 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF990804C13 2 Report Format Version 3.0.1 Table of Contents 1. CERTIFICATION ...........................................................................................................3 2. SUMMARY OF TEST RESULTS ...................................................................................4 2.1 MEASUREMENT UNCERTAINTY ................................................................................4 3. GENERAL INFORMATION............................................................................................5 3.1 GENERAL DESCRIPTION OF EUT..............................................................................5 3.2 DESCRIPTION OF TEST MODES................................................................................6 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ...........................................................6 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ...............................................8 3.4 DESCRIPTION OF SUPPORT UNITS ..........................................................................8 4. TEST TYPES AND RESULTS .......................................................................................9 4.1 RADIATED EMISSION MEASUREMENT .....................................................................9 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT...................................................9 4.1.2 TEST INSTRUMENTS ................................................................................................10 4.1.3 TEST PROCEDURES ................................................................................................. 11 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................... 11 4.1.5 TEST SETUP ..............................................................................................................12 4.1.6 EUT OPERATING CONDITIONS ................................................................................12 4.1.7 TEST RESULTS ..........................................................................................................13 4.2 BAND EDGES MEASUREMENT ................................................................................19 4.2.1 LIMITS OF BAND EDGES MEASUREMENT .............................................................19 4.2.2 TEST INSTRUMENTS ................................................................................................19 4.2.3 TEST PROCEDURE ...................................................................................................19 4.2.4 DEVIATION FROM TEST STANDARD .......................................................................19 4.2.5 EUT OPERATING CONDITION ..................................................................................19 4.2.6 TEST RESULTS ..........................................................................................................20 5. PHOTOGRAPHS OF THE TEST CONFIGURATION..................................................22 6. INFORMATION ON THE TESTING LABORATORIES ................................................23 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB.........................................................................................24 Report No.: RF990804C13 3 Report Format Version 3.0.1 1. CERTIFICATION PRODUCT: 2.4GHz Wireless Keyboard BRAND: KYE MODEL NO.: K7910 APPLICANT: KYE SYSTEMS CORP. TESTED: Aug. 06 ~ Aug. 10, 2010 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.4-2003 The above equipment (model: K7910) have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Aug. 12, 2010 Pettie Chen / Specialist TECHNICAL ACCEPTANCE : , DATE :Aug. 12, 2010 Responsible for RF Long Chen / Senior Engineer APPROVED BY : , DATE :Aug. 12, 2010 Gary Chang / Assistant Manager Report No.: RF990804C13 4 Report Format Version 3.0.1 2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249) STANDARD PARAGRAPH TEST TYPE RESULTREMARK 15.207 Conducted Emission Test NA Power supply is 3Vdc from batteries. 15.209 15.249 15.249 (d) Radiated Emission Test Band Edge Measurement Limit: 50dB less than the peak value of fundamental frequency or meet radiated emission limit in section 15.209 PASS Meet the requirement of limit. Minimum passing margin is -16.4dB at 4896.00MHz. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have …

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST