GU6-QUATECH1Mobile PrinterModel name - 9485NP

All specifications are subject to change without notice USER MANUAL TC9485UM Rev. AF 12/14 1 Table of Contents 1. Unpacking 2 2. Product overview 3 3. Installation & Usage 4 3-1. Display4 3-2. Installing the Battery5 3-3. Removing the Battery6 3-4. Charging the Battery7 3-5. Installing Belt Clip8 3-6. Stock Installation9 3-7. Peel Mode 10 3-8. Shoulder Strap Installation11 3-9. Diagnostic Test 12 4. Peripherals Connection14 4-1. Wireless Communication14 4-2. Interface Cable Connection15 5. Printer Cleaning16 5-1. PrintHead Cleaning16 5-2. Platen Roller Cleaning17 6. Pritner Specification18 6-1. Specification18 7. CPCL Command Compatibility20 8. ZPL Command Compatibility23 RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTION THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFI- CATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. 2 3 1. Unpacking Stock Shoulder Strap SHOULDER STRAP RING Printer Battery Belt Clip Recharger Optional Standard 2. Product overview CHARGER CONNECTOR COVER OPEN BUTTON Front Bottom CD USB Cable Quick Reference Serial cable PEELER BODY PEELER WING BATTERY DOOR BELT CLIP CONNECTOR SERIAL USB DISPLAY 4 5 Button Name function Paper Feed/ Down button Advances the supply. Clears error message. Moves down through menu options. Enter button Selects the highlighted menu option. Up button Moves up through menu options. Power button Turns the printer on and off. Press to turn power on. Press for three seconds to turn power off. Wakes the printer from sleep mode. 3-2. Installing the Battery NOTE NOTE 3-1. Display 3. Setting Up the Product Remove the battery door. Insert the battery as shown. 1 2 Replace the battery door. You must fully charge the battery when you receive the printer. Batteries can be charged in the printer or in an optional external cradle 1. The battery status LEDs indicate amount of power remaining. Actual run-time remaining depends on factors such as the contents of output, distance to computer, etc. 2. When the battery level is very low, high density printing can result in the printer switching off during printing resulting in possible loss of data. 6 7 3-4. Charging the Battery 1. Turn off the printer. 2. Be sure that the AC plug is correct. If AC plug is wrong, change the plug to the correct one. 3. Open the DC jack by pulling on the rubber cover and insert DC jack into the printer. 4. Plug the AC plug into an electrical outlet. 5. The charge indicator LED (located on the AC charger as shown) shows red or green according to the status. 3-3. Removing the Battery 3-4-1 The status of lamp in charging Status charging charging complete Charging Lamp Red Green Remove the battery door. Lift out the battery. ② ① LED If there is trouble while charging the battery, the charge indicator LED blinks green. Try unplugging and reconnecting charger, charging should resume. Charging is complete when the LED changes to solid green. NOTE 8 9 Use two hands to close the cover until it clicks into place. Press the feed button. The belt clip is included with the printer but is not required to be used or installed! 3-5. Belt clip Usage Insert screw into belt clip. Tighten the screw with driver as shown. 1 2 NOTE 3-6. Stock Installation 12 3 4 Put the stock in so it unrolls from the bottom. Remove the stock core when it is empty. Pull a short length of stock out of the printer. Open the Paper cover by pressing the Open button and set the width of paper guide by turning the knob with finger. Adjust the width of paper guide if needed. 10 11 3-7. Peel Mode 12 12 With a roll of stock installed, slide the peeler body towards the back of the printer. Lift the peeler wing and slide the peeler body towards the front of the printer. Press the feed button. Push the peeler body until you see two complete triangles. Press the feed button. Peel Mode Non-Peel Mode Insert the strap into the hook of the printer. Place the end of the strap into the hook of shoulder strap. After pulling out the end of the strap tightly, put it into the clip to be fastened. Optional 1 32 3-8. Shoulder Strap Installation 12 13 3-9. Diagnostic Test 12 3 NOTE Turn off the printer. The information label prints. Press and hold the feed button and power button. 1. For Hex Dump mode, do steps 1-2 then press the feed button. 2. After printing ASCII pattern, the diagnostic test is complete. 3. If the feed button is not pressed to go to Hex Dump mode, the printer exits diagnostics after three seconds. The sample of self test printout Upon initial installation or for troubleshooting, you can run the diagnostic test to get information about: Firmware version, emulation, codepage, sensor settings, interface settings, etc. If no issues are found with diagnostic test, examine other devices and software. The diagnostic test is working independent of devices and software. ● Do not overheat the motor To prevent the motor from overheating, stop the printer for at least 30 seconds after continuously printing 1.5 meters. 14 15 4. Peripherals Connection This product can communicate with other devices using Bluetooth, WiFi (802.11b/g), or a USB/Serial cable. 1. Printer can connect to a PDA or PC for wireless communication. 2. Your PC must support Bluetooth or WiFi (802.11b/g) to connect to the printer. 4-1. Wireless Communication NOTE Refer to the System Administrator Guide for more information. 4-2. Interface Cable Connection 1. Connect the USB or Serial cable to the cable connector on the printer. 2. Connect the interface cable into the USB or Serial port of the device (PDA, PC, etc.) NOTE Use only the cables offered by the printer manufacturer. Serial USB 16 17 5-1. PrintHead Cleaning 5. Printer cleaning If the interior of the printer is dusty, printing quality can be lowered. In this case, follow the instructions below to clean the printer. NOTE 1. Make sure to turn the p…

Text truncated - open the document above for the full version.

Federal Communications Commission Authorization and Evaluation Division Client in Non-Associated Mode In re : Avery Dennison Retail Information Services, LLC FCC ID : GU6-QUATECH1 TO WHOM IT MAY CONCERN We Avery Dennison declare that our product 9485NP operates under the definition of a DFS client device without radar detection as per 47 CFR part 15.202. The client software and associated drivers will not initiate any transmissions on DFS frequencies 5260-5320 MHz and 5500 - 5700 MHz without initiation by a master device. This includes restrictions on transmissions for beacons and support for ad-hoc peer the peer modes. Sincerely, Date: September 20, 2015 Name: Ali Elmi Function: Regulatory Engineer Signature:

CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Date: June 19, 2015 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Avery Dennison Retail Information Services, LLC requests confidentiality for the following products: FCC ID Number Product Title/Model GU6-QUATECH1 Mobile Printer / 9485NP The following exhibits contain trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our product. This material is not customarily available to the general public and we request that it be withheld from public inspection. We request that the following information submitted be held permanent confidential treatment. Permanent Confidential Request - Schematics - Block diagram - Part List - Operational description - Antenna specification - PCB Layout Best regards, Type Name: Ali Elmi Title: Regulatory Engineer E-mail: [email protected] Company name: Avery Dennison Retail Information Services, LLC

Date: June 19, 2015 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. UL Verification Services Inc. (formerly UL CCS) Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms.Sangah JEON/Application Examiner of UL-Korea and hereafter referred to as ULK, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms.Sangah JEON/Application Examiner of UL-Korea on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ULK as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Ali Elmi / Regulatory Engineer Avery Dennison Retail Information Services, LLC REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Label and Location

CTK Co., Ltd. (Ho-dong) 113, Yejik-ro, Cheoin-gu, Yong-in-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com EUT Internal Photographs CTK Co., Ltd. (Ho-dong) 113, Yejik-ro, Cheoin-gu, Yong-in-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Board_Main CTK Co., Ltd. (Ho-dong) 113, Yejik-ro, Cheoin-gu, Yong-in-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com CTK Co., Ltd. (Ho-dong) 113, Yejik-ro, Cheoin-gu, Yong-in-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com LCD CTK Co., Ltd. (Ho-dong) 113, Yejik-ro, Cheoin-gu, Yong-in-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com CTK Co., Ltd. (Ho-dong) 113, Yejik-ro, Cheoin-gu, Yong-in-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Board_Sub CTK Co., Ltd. (Ho-dong) 113, Yejik-ro, Cheoin-gu, Yong-in-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com CTK Co., Ltd. (Ho-dong) 113, Yejik-ro, Cheoin-gu, Yong-in-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Board_WLAN CTK Co., Ltd. (Ho-dong) 113, Yejik-ro, Cheoin-gu, Yong-in-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com CTK Co., Ltd. (Ho-dong) 113, Yejik-ro, Cheoin-gu, Yong-in-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Test Report No.: CTK-2015-01157 Date: 2015-08-31 Page 1 of 36 This Report shall not be reproduced except in full without the written approval of CTK Form No.: CTK-RF-EF-Part15 Subpart C(Rev.2) TEST REPORT For FCC FCC Standards : FCC 47CFR part 15 subpart C Industry Canada Standards : RSS-247 Issue 1 & RSS-GEN Issue 4 Test Report No. : CTK-2015-01157 Date of Issue : 2015-08-31 FCC ID : GU6-QUATECH1 Certification Number IC : 1502A-QUATECH1 Model/Type No. : 9485NP Kind of Product : Mobile Printer Applicant : Avery Dennison Retail Information Services, LLC Applicant Address : 170 Monarch Lane, Miamisburg, Ohio, USA 45342 Manufacturer : SEWOO TECH Co., Ltd. Manufacturer Address : 28-6,Gajangsaneopdong-ro Osan-si, Gyeongai-do Korea Contact Person : James Bacher / Senior Engineer Telephone : 937.865.2020 Received Date : 2014-11-26 Test period : Start : 2015-08-06 End : 2015-08-29 The test results presented in this report relate only to the object tested. Tested by Reviewed by Young-taek Lee Test Engineer Young-Joon, Park Technical Manager Date: 2015-08-31 Date: 2015-08-31 CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Test Report No.: CTK-2015-01157 Date: 2015-08-31 Page 2 of 36 This Report shall not be reproduced except in full without the written approval of CTK Form No.: CTK-RF-EF-Part15 Subpart C(Rev.2) REPORT REVISION HISTORY Date Revision Page No 2015-08-31 Issued (CTK-2015-01157) All This report shall not be reproduced except in full, without the written approval of CTK Co., Ltd. This document may be altered or revised by CTK Co., Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by CTK Co., Ltd. will constitute fraud and shall nullify the document. CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Test Report No.: CTK-2015-01157 Date: 2015-08-31 Page 3 of 36 This Report shall not be reproduced except in full without the written approval of CTK Form No.: CTK-RF-EF-Part15 Subpart C(Rev.2) TABLE OF CONTENTS REPORT REVISION HISTORY ............................................................................................................................. 2 1.0 General Product Description ............................................................................................................... 4 1.1 Tune-up limits .................................................................................................................................. 5 1.2 Tested Frequency ............................................................................................................................. 6 1.3 Device Modifications .......................................................................................................................... 6 1.4 Model Differences ............................................................................................................................. 6 1.5 Peripheral Devices ............................................................................................................................ 6 1.6 Calibration Details of Equipment Used for Measurement ........................................................................ 6 1.7 Test Facility...................................................................................................................................... 6 1.8 Laboratory Accreditations and Listings ................................................................................................. 7 2.0 Summary of tests ............................................................................................................................. 8 2.1 Technical Characteristic Test .............................................................................................................. 9 2.1.1 ON Time, Duty Cycle .................................................................................................................. 9 2.1.2 6dB Bandwidth and 99% Bandwidth .......................................................................................... 10 2.1.3 Conducted Output Power .......................................................................................................... 12 2.1.4 Power Spectral Density ............................................................................................................ 14 2.1.5 Band - edge ............................................................................................................................ 16 2.1.6 Field Strength of Emissions ....................................................................................................... 19 2.1.7 AC Conducted Emissions .......................................................................................................... 31 APPENDIX A – Test Equipment Used For Tests................................................................................................... 36 CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Test Report No.: CTK-2015-01157 Date: 2015-08-31 Page 4 of 36 This Report shall not be reproduced except in full without the written approval of CTK Form No.: CTK-RF-EF-Part15 Subpart C(Rev.2) 1.0 General Product Description Equipment model name 9485NP Device type Client device Serial number Prototype EUT condition Pre-production, not damaged Frequency Range 802.11b/g : 2412 MHz - 2462 MHz RF output power : Mode Channel Bandwidth (MHz) RF output power (dBm) 802.11b 20 14.64 802.11g 20 6.22 Number of channels 11 Transfer Rate 802.11b : 11 / 5.5 / 2 / 1 Mbps 802.11g : 54 / 48 / 36 / 24 / 1…

Text truncated - open the document above for the full version.

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Test Setup Photographs and Configuration Conducted Voltage Emissions CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Conducted Test CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Radiated Electric Field Emissions CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com