GV3M01186Bluetooth Keyboard

Page 1 of 12 BLUETOOTH® KEYBOARD Rev 0.1 Page 2 of 12 BLUETOOTH® KEYBOARD Rev 0.1 User’s Quick Guide Congratulations on your purchase of the Primax KBBT70811 NEMO Bluetooth® Keyboard! This guide will take you through all the functions of this keyboard. Introduction is the latest in a wide range of tablet peripherals manufactured by Primax and is designed to provide you with the highest level of comfort available while also allowing for maximum functionality. Primax KBBT70811 NEMO Bluetooth® Keyboard Safety Guidelines Physical discomfort and injury can be caused by the incorrect use of your keyboard. Follow these guidelines to ensure such problems are avoided: Sit up straight in your chair, with your elbows by your side. Adjust the height of your chair so your arm bends at a 90-degree angle respective to your desk. Position your keyboard in front you, to the side of your keyboard. Do not slouch or hunch over your workspace. It is important to keep your wrists, arms and shoulders relaxed. If necessary, use a wrist rest or a palm rest to alleviate extra stress placed on your joints when typing or using the keyboard, especially for long periods of time. If you experience any feelings numbness, cramp, swelling or stiffness in your wrist, arms, neck or shoulders, consult your local doctor or nearest health institution immediately. Bluetooth® keyboard connection settings Page 3 of 12 BLUETOOTH® KEYBOARD Rev 0.1 Follow below steps to connect the Bluetooth® keyboard and the tablet system. 1. Turn on the power switch in right side of the Bluetooth® keyboard. The keyboard connection indicator light blinks blue. Note: If the Bluetooth® indicator lights stop blinking, long press the connect buttons on the keyboard to restart the connection process. Note: If the indicator blinks quickly, it means this keyboard has been paired before. Long press the connection button to clean the paired data and restart the connection. 2. Turn on Bluetooth in Tablet/iPad/Laptop settings. Tablet/iPad/Laptop will start discovering the list of available Bluetooth® devices for pairing. Note: If NEMO Bluetooth Keyboard is not found, long press the Keyboard connect button and manually trigger the device search again in tablet/iPad/Laptop. 3. Select the Primax NEMO Keyboard from the list. 4. Using Primax Bluetooth® Keyboard to enter the pairing code and press the Enter key to complete the Bluetooth connection. After the pairing process is completed, the last paired data will be stored. Auto connection will be supported in later operation. Bluetooth® keyboard Hotkey support The hotkey function support, position or printing might be various while shipping. Enclosed is Windows 8 version. Page 4 of 12 BLUETOOTH® KEYBOARD Rev 0.1 LED Indicator This Keyboard includes one LED in the left side with 2 colors presenting connection and power status. 1. In Pairing (Blue): Blinking one time every 1 second, time out after 5 minutes. 2. In Reconnecting (Blue): Double blinking every 1 second, time out after 10 seconds. 3. Just Connected (Blue): Steady for 2 seconds. 4. Low Power (Orange): Blinking orange LED one time every 1 second until it enters another mode. 5. Charging (Orange): Orange LED on. It will be off after the battery is full. Power Supply This keyboard has built-in rechargeable Li-on battery. When user first time opens the box, it’s recommended to fully charge the battery with bundled cable through MicroUSB port. Page 5 of 12 BLUETOOTH® KEYBOARD Rev 0.1 Troubleshooting Question: My keyboard is not working. What should I do? Answer: 1. Check if the Bluetooth® connection is turned on correctly in the system side. 2. Other system devices, such as PC cards, may cause conflicts that prevent your keyboard from working properly. Check the settings of these devices and make any changes as necessary. Reboot your computer and re-attach the keyboard. Low Battery Notification When the keyboard is running out of power, the indicator will blink orange. Please re-charge the batteries with microUSB connector to continue to use the keyboard. Wake up the keyboard Press any button to wake up the keyboard while the keyboard is in the standby mode. Page 6 of 12 BLUETOOTH® KEYBOARD Rev 0.1 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environme…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

x=ÜÙ ̈ÓÖ 3 Kensington 304004558180 304004558180 1 FCC LABEL Cheery.Qiao 12-04-21 Sarah.Lee Gene.Liang Year(2012=12,2013=13......) 3.Follow Halogen- Free requirement : Br<900 ppm, Cl<900 ppm, Br+Cl< 1500 ppm if required. C 8.SN需對應的料號是： 9. Product must be halogen free. 日期及周別需對應的料號是： 6. (十進制) Bluetooth Keyboard 50.4 mm 3 0 . 4 m m 1:1 FCC ID: GV3M01186 M/N: M01186 P/N: K72440 Designed in California, USA www.kensington.com Assembled in China SN: C Y Y W W A X X X X 901-XXXX-XX Bluetooth Keyboard FCC ID: GV3M01186 M/N: M01186 P/N: K72440 Designed in California, USA www.kensington.com Assembled in China SN: C Y Y W W A X X X X 901-XXXX-XX

Label location

Page 3 Page 4 Page 5 Page 6 Page 7 Page 8

FCC ID: GV3M01186 Report No.: RF120718D09A Operational Description The device is a Frequency Hopping device with 79 hopping frequencies. The antenna type is Printed antenna and there is no antenna connector used. The EUT is a unit that contains a Bluetooth radio module. Bluetooth is a short-range wireless technology operating in the 2.4GHz band. It enables devices to have the ability to form networks and exchange information. The other instruction, please have a look at the user’s manual.

Report No: SA120718D09A 1 of 6 Report Format Version 5.0.0 Reference No.: 120718D09, 121130D05 RF EXPOSURE REPORT REPORT NO.:SA120718D09A MODEL NO.:M01186 FCC ID:GV3M01186 RECEIVED:Jul. 2, 2012 TESTED:Jul. 2 ~ 25, 2012 ISSUED:Dec. 6, 2012 APPLICANT: ACCO Brands, Inc. ADDRESS: 333 Twin Dolphin Drive, 6th Floor, Redwood Shores, CA, 94065, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No: SA120718D09A 2 of 6 Report Format Version 5.0.0 Reference No.: 120718D09, 121130D05 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................ 3 1. CERTIFICATION ...................................................................................... 4 2. RF EXPOSURE LIMIT ............................................................................. 5 3. MPE CALCULATION FORMULA ............................................................. 5 4. CLASSIFICATION .................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........... 6 Report No: SA120718D09A 3 of 6 Report Format Version 5.0.0 Reference No.: 120718D09, 121130D05 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120718D09A Original release Dec. 6, 2012 Report No: SA120718D09A 4 of 6 Report Format Version 5.0.0 Reference No.: 120718D09, 121130D05 1. CERTIFICATION PRODUCT: Bluetooth Keyboard BRAND NAME: M01186 MODEL NO.: Kensington APPLICANT: ACCO Brands, Inc. TESTED: Jul. 2 ~ 25, 2012 TEST ITEM: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Dec. 6, 2012 ( Annie Chang / Supervisor ) APPROVED BY : , DATE:Dec. 6, 2012 ( Ken Liu / Manager ) Report No: SA120718D09A 5 of 6 Report Format Version 5.0.0 Reference No.: 120718D09, 121130D05 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No: SA120718D09A 6 of 6 Report Format Version 5.0.0 Reference No.: 120718D09, 121130D05 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2402-2480 -2.2 -0.56 20 0.0001 1.00 --- END ---

Report No.: RF120718D09A 1 of 41 Report Format Version 5.0.0 Reference No.: 120718D09, 121130D05 FCC TEST REPORT REPORT NO.: RF120718D09A MODEL NO.: M01186 FCC ID: GV3M01186 RECEIVED: Jul. 2, 2012 TESTED: Jul. 2 ~ 25, 2012 ISSUED: Dec. 6, 2012 APPLICANT: ACCO Brands, Inc. ADDRESS: 333 Twin Dolphin Drive, 6th Floor, Redwood Shores, CA, 94065, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120718D09A 2 of 41 Report Format Version 5.0.0 Reference No.: 120718D09, 121130D05 Table of Contents RELEASE CONTROL RECORD ................................................................................. 4 1. CERTIFICATION ............................................................................................... 5 2. SUMMARY OF TEST RESULTS ...................................................................... 6 2.1 MEASUREMENT UNCERTAINTY .................................................................... 6 3. GENERAL INFORMATION ............................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ........................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ............................................. 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................. 12 4. TEST TYPES AND RESULTS ........................................................................ 13 4.1 CONDUCTED EMISSION MEASUREMENT .................................................. 13 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................... 13 4.1.2 TEST INSTRUMENTS .................................................................................... 13 4.1.3 TEST PROCEDURES .................................................................................... 14 4.1.4 DEVIATION FROM TEST STANDARD ........................................................... 14 4.1.5 TEST SETUP .................................................................................................. 15 4.1.6 EUT OPERATING CONDITIONS ................................................................... 15 4.1.7 TEST RESULTS ............................................................................................. 16 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ......................... 18 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ....... 18 4.2.2 TEST INSTRUMENTS .................................................................................... 19 4.2.3 TEST PROCEDURES .................................................................................... 20 4.2.4 DEVIATION FROM TEST STANDARD ........................................................... 20 4.2.5 TEST SETUP .................................................................................................. 21 4.2.6 EUT OPERATING CONDITIONS ................................................................... 21 4.2.7 TEST RESULTS ............................................................................................. 22 4.3 NUMBER OF HOPPING FREQUENCY USED ............................................... 26 4.3.1 LIMIT OF HOPPING FREQUENCY USED ..................................................... 26 4.3.2 TEST SETUP .................................................................................................. 26 4.3.3 TEST INSTRUMENTS .................................................................................... 26 4.3.4 TEST PROCEDURES .................................................................................... 26 4.3.5 DEVIATION FROM TEST STANDARD ........................................................... 26 4.3.6 TEST RESULTS ............................................................................................. 26 4.4 DWELL TIME ON EACH CHANNEL ............................................................... 28 4.4.1 LIMIT OF DWELL TIME USED ....................................................................... 28 4.4.2 TEST SETUP .................................................................................................. 28 4.4.3 TEST INSTRUMENTS ................................................................…

Text truncated - open the document above for the full version.

Report No.: RF120718D09 1 of 2 Report Format Version 5.0.0 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: RF120718D09 2 of 2 Report Format Version 5.0.0 RADIATED EMISSION TEST