GV3M01238Bluetooth Wireless Keyboard

Kensington® USER MANUAL M01238(Keyboards) Introduction 1. Introduction 1.1 Product Briefing M01238 is designed for using iPad mini with in Bluetooth Wireless Keyboard technology and recharge Li-ion battery. The main proposal is for mobility and easy carry with iPad mini to build into one leather case. Keyboard use notebook scissors design. 1.2 BLUETOOTH SPECIFICATIONS Bluetooth Chip: Broadcom BCM20730 Bluetooth specification version 3.0 compatible. Bluetooth HID profile version 1.0 compliant. Bluetooth Radio Power: Class 2 or Class 3 requirements RF Frequency Range: 2.402 ~ 2.480 GHz Receive Sensitivity: -84dBm This keyboard built-in li-ion polymer battery is charged through MicroUSB port. This device is compatible with Apple Tablet , NEW iPad and iOS Version 4.3 + 1.3 POWER REQUIREMENTS Battery: 1 Li-ion polymer battery Working voltage range: 4.2V~3.0V Charge current: 100mA Rating: 3.7V / 250mA 1.4 WEIGHT AND DIMENSIONS 1. Weight: 207 g 2. Dimensions: 205 x 140 x 5.5 mm (only KB side without IPAD holder) 3. Dimensions: 205 x 140 x 15.6 mm 1.5 IDENTIFICATION AND MARKING 1. Label Kensington® USER MANUAL It would be pasted on the lower case to cover the injection point. Please refer to the picture below. 3.1.2 IPAD mini angle X = 120°±10° 3.1.3 IPAD mini angle Y= 155°±10° Label location Kensington® USER MANUAL KEYBOARD OUTLINE Dimensions Kensington® USER MANUAL FCC ID:GV3M01238 FCC Statement: Kensington® USER MANUAL This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IC:6128A-M01238 IC Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

ACCO Brands, Inc. 333 Twin Dolphin Drive, 6th Floor, Redwood Shores, California, United States,94065 Tel: 650-267-2711 / Fax: 604-431-5155 Date: 2013/5/14 Confidential Letter Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Confidentiality Request for FCC ID：GV3M01238 Gentlemen: The form 731 and application have been electronically submitted and any attachments will be up loaded to your web site to be used in obtaining a grant of certification. Short-term Pursuant to DA 04-1705 of the Commission’s pubic notice, we request short-term confidential treatment for the following information until 60 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: 1. External Photos 2. Internal Photos 3. Test Setup photos 4. User’s Manual Permanent ACCO Brands, Inc. requests that the material in the following files be withheld from public disclosure in accordance with Section 0.457 of the Commission’s Rules, 47 C.F.R. 0.459, following grant of the application. 1. Block Diagram 2. Circuit Diagram 3. Operational Description Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Applicant’s company name : ACCO Brands, Inc. Applicant’s company address : 333 Twin Dolphin Drive, 6th Floor, Redwood Shores, California, United States,94065 Signature : _____________________________ Name : Maggie Zhang E-Mail : [email protected] Tel. : 650-267-2711

ACCO Brands, Inc. 333 Twin Dolphin Drive, 6th Floor, Redwood Shores, California, United States,94065 Tel: 650-267-2711 / Fax: 604-431-5155 Power of Attorney Date: 2013/5/14 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Address : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : [email protected] I am therefore responsible for the contents of the application. Brand name and model type of the specified radio equipment: Kensington® / M01238 FCC ID: GV3M01238 Product name: Bluetooth Wireless Keyboard FCC Grantee contact person information. Applicant’s company name : ACCO Brands, Inc. Applicant’s company address : 333 Twin Dolphin Drive, 6th Floor, Redwood Shores, California, United States,94065 Signature : _____________________________ Name : Maggie Zhang E-Mail : [email protected] Tel. : 650-267-2711

Report No.: 340944 SPORTON International Inc. PAGE NUMBER : 1 OF 3 TEL : 886-2-2696-2468 ISSUED DATE : May. 28, 2013 FAX : 886-2-2696-2255 Photographs of EUT Report No.: 340944 SPORTON International Inc. PAGE NUMBER : 2 OF 3 TEL : 886-2-2696-2468 ISSUED DATE : May. 28, 2013 FAX : 886-2-2696-2255 Report No.: 340944 SPORTON International Inc. PAGE NUMBER : 3 OF 3 TEL : 886-2-2696-2468 ISSUED DATE : May. 28, 2013 FAX : 886-2-2696-2255

Label here

Report No.: 340944 SPORTON International Inc. PAGE NUMBER : 1 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : May. 28, 2013 FAX : 886-2-2696-2255 Photographs of EUT Report No.: 340944 SPORTON International Inc. PAGE NUMBER : 2 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : May. 28, 2013 FAX : 886-2-2696-2255 Report No.: 340944 SPORTON International Inc. PAGE NUMBER : 3 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : May. 28, 2013 FAX : 886-2-2696-2255 Report No.: 340944 SPORTON International Inc. PAGE NUMBER : 4 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : May. 28, 2013 FAX : 886-2-2696-2255 Report No.: 340944 SPORTON International Inc. PAGE NUMBER : 5 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : May. 28, 2013 FAX : 886-2-2696-2255 Report No.: 340944 SPORTON International Inc. PAGE NUMBER : 6 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : May. 28, 2013 FAX : 886-2-2696-2255 Report No.: 340944 SPORTON International Inc. PAGE NUMBER : 7 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : May. 28, 2013 FAX : 886-2-2696-2255

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, TaoYuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: 02 FCC RADIO TEST REPORT Applicant’s company ACCO Brands, Inc. Applicant Address 333 Twin Dolphin Drive, 6th Floor, Redwood Shores, California, United States,94065 FCC ID GV3M01238 Manufacturer’s company Darfon Electronics(Suzhou) Co., Ltd. Manufacturer Address 99, Zhu Yuan Road, New District, Suzhou, JiangSu, China Product Name Bluetooth Wireless Keyboard Brand Name Kensington® Model Name M01238 Test Rule 47 CFR FCC Part 15 Subpart C § 15.247 Test Freq. Range 2400 ~ 2483.5MHz Received Date Apr. 09, 2013 Final Test Date May 09, 2013 Submission Type Original Equipment Statement Test result included is only for the Bluetooth BR part of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.10-2009 and 47 CFR FCC Part 15 Subpart C. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FR340944 Report Format Version: 02 Page No. : i of ii FCC ID: GV3M01238 Issued Date :May 14, 2013 Table of Contents 1. CERTIFICATE OF COMPLIANCE ........................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT ............................................................................................................................ 2 3. GENERAL INFORMATION..................................................................................................................................... 3 3.1. Product Details ........................................................................................................................................................................................... 3 3.2. Feature of Equipment under Test ............................................................................................................................................................ 3 3.3. Accessories ................................................................................................................................................................................................. 3 3.4. Table for Filed Antenna ............................................................................................................................................................................. 4 3.5. Table for Carrier Frequencies ................................................................................................................................................................... 4 3.6. Table for Test Modes .................................................................................................................................................................................. 4 3.7. Table for Testing Locations........................................................................................................................................................................ 5 3.8. Table for Supporting Units ......................................................................................................................................................................... 5 3.9. Table for Parameters of Test Software Setting ....................................................................................................................................... 5 3.10. EUT Operation during Test ......................................................................................................................................................................... 5 3.11. Test Configurations..................................................................................................................................................................................... 6 4. TEST RESULT........................................................................................................................................................... 9 4.1. AC Power Line Conducted Emissions Measurement ........................................................................................................................... 9 4.2. Maximum Conducted Output Power Measurement......................................................................................................................... 13 4.3. Hopping Channel Separation Measurement ...................................................................................................................................... 15 4.4. Number of Hopping Frequency Measurement................................................................................................................................... 20 4.5. Dwell Time Measurement........................................................................................................................................................................ 23 4.6. Radiated Emissions Measurement......................................................................................................................................................... 30 4.7. Emissions Measurement........................................................................................................................................................................... 39 4.8. Antenna Requirements ........................................................................................................................................................................... 47 5. LIST OF MEASURING EQUIPMENTS .................................................................................................................... 48 6. TEST…

Text truncated - open the document above for the full version.

Report No.: FR340944 FCC ID: GV3M01238 Page No. : A1 of A5 Appendix A. Test Photos Report No.: FR340944 FCC ID: GV3M01238 Page No. : A2 of A5 1. Photographs of Conducted Emissions Test Configuration FRONT VIEW REAR VIEW Report No.: FR340944 FCC ID: GV3M01238 Page No. : A3 of A5 2. Photographs of Radiated Emissions Test Configuration Test Configuration: 9 kHz ~ 30 MHz FRONT VIEW REAR VIEW Report No.: FR340944 FCC ID: GV3M01238 Page No. : A4 of A5 Test Configuration: 30 MHz ~ 1 GHz FRONT VIEW REAR VIEW Report No.: FR340944 FCC ID: GV3M01238 Page No. : A5 of A5 Test Configuration: Above 1 GHz FRONT VIEW REAR VIEW