GV3M01314-DWireless dongle for life

24-month battery life Two automatic mode change to energy-saving mode which lower the power consumption to 9mW. Under the standard status, 1*AA battery can last for 24 months. Low-carbon environment save time and extend the battery life. Nano receiver The nano receiver can be perfectly stored in the bottom of the mouse. Even when you are using the mouse, it can be perfectly hidden inside the USB port which make you forget about it. Operation distance Resolution Engine Accelaration IR sensor In order to keep the mouse for best using, A07G only require minimum maintenance. To avoid dust, we suggest using soft cloth or cotton yarn with little warm water to clean the nano receive after pulling it from the USB port. Do the cleaning once in one month. Do not use soap or trong detergent for cleaning. For best use the mouse in controlling and oving, strongly suggest you purchase high grade mouse pad. The mouse foot may be wear out by some mouse pad, which make you use the mouse unfavorably and force you change new mouse. 1 × A07G Mouse 1 × Nano receiver 1 × AA battery 1 × User guide Package contents:Installation Open the battery cover and insert one AA battery. Switch the ON/OFF button to ON please pay attention to the the positive and negative polarity Plug the Nano receiver into an available USB port on your laptop or desktop. Automatical sleep energy-saving mode When stop using the mouse, it will automatically switch to two grades of sleep mode, which is super energy-saving. Time Sleep status Power consumption After 0.2 seconds First grade After 20 seconds Second grade User Guide User Guide Thanks for buying Fuhlen products, please read this user guide carefully before use. Feature Super silent keys function The mouse has silent microswitch, its key stroke noise is lower than other mouse over 90%. The super silent keys brings you good comfort grip. No need to worry about the annoying key stroke noise in the still of night. High precision IR sensor The mouse has high precision IR sensor with high positioning accuracy. It can adapt with surface in different material and brings you high precision of the cursor control. IR sensor Technical data Operation current Power supply Power consumption Frequency band Maintenance Wireless mouse for life™ M01314-M Kensington Computer Products Group, A Division of ACCO Brands, LLC CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause nterference, and (2) this device must accept any interference, ncluding interference that may cause undesired operation of the device Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Complies with the Canadian ICES-003 Class B specifications. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:GV3M01314-D page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F15172 12-1 12. PHOTOGRAPH OF EUT Figure 1 General Appearance of the EUT Figure 2 General Appearance of the EUT

版本：1.0 品号： 品名： 规格： 单位：mm 公差范围：±0.5 珠海市智迪科技有限公司 G.TECH TECHNOLOGY LTD. 丝印镭射确认书 MA102W-C+RG10 2015-04-27 KTG Kensington-A07G-01-01 10mm 尺寸：20*4.4mm LOGO丝印位置：对齐中心线左右居中 LOGO及标识丝印颜色：冷灰11C 品号： 品名： 规格： LOGO尺寸：10*2.2MM LOGO及标识丝印颜色：冷灰11C 2 0 m m 1.1mm 1.1mm 1.1mm 1.1mm M/N: M01314-D FCC ID: GV3M01314-D IC:6128A-M01314D 放大后， 供查看 镭射位置镭在 插头范围内， 且清晰。 M/N: M01314-D FCC ID: GV3M01314-D IC:6128A-M01314D 87001020130 MA102W上盖/丝印Kensington/冷灰11c 注塑黑色0223/ABS 87020100730 RG10胶壳/丝印Kensington/冷灰11c 黑色0223/ABS纯原料

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:GV3M01314-D page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F15172 12-2 Figure 3 General Appearance of the EUT Figure 4 General Appearance of the EUT

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:GV3M01314-D page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F15172 8-1 8. RADIO FRREQUENCY EXPOSURE COMPLIANCE RESULT : PASS Test standard : FCC KDB Publication 447498 D01 V05 Since maximum peak output power of the transmitter is<10mW, i.e.0.009346mW<10mW, hence the EUT is excluded from SAR evaluation according to FCC KDB Publication 447498 D01:General RF Exposure Guidance V05.

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:GV3M01314-D Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F15172 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of ACCO Brands Inc. Wireless dongle for life TM Model Number:M01314-D FCC ID: GV3M01314-D Prepared for : ACCO Brands Inc. 1500 Fashion Island Blvd., 3rd Floor, San Mateo, CA 94404, USA Prepared By : Audix Technology (Shenzhen) Co., Ltd. No. 6, Ke Feng Rd., 52 Block, Shenzhen Science & Industrial Park, Nantou, Shenzhen, Guangdong, China Tel: (0755) 26639496 Report Number ： ACS-F15172 Date of Test ： Aug.03, 2011~Jan.20, 2015 Date of Report ： Jun.24, 2015 R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:GV3M01314-D Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F15172 TABLE OF CONTENTS Description Page 1. SUMMARY OF STANDARDS AND RESULTS.......................................................... 1-1 1.1. Description of Standards and Results .................................................................................. 1-1 2. GENERAL INFORMATION ......................................................................................... 2-1 2.1. Description of Device (EUT) ............................................................................................... 2-1 2.2. Tested Supporting System Details ....................................................................................... 2-2 2.3. EUT Configuration and operation conditions for test.......................................................... 2-2 2.4. Test Facility ......................................................................................................................... 2-3 2.5. Measurement Uncertainty (95% confidence levels, k=2) .................................................... 2-3 3. POWER LINE CONDUCTED EMISSION TEST ....................................................... 3-1 3.1. Test Equipment .................................................................................................................... 3-1 3.2. Block Diagram of Test Setup ............................................................................................... 3-1 3.3. Power Line Conducted Emission Test Limits...................................................................... 3-1 3.4. Configuration of EUT on Test ............................................................................................. 3-1 3.5. Operating Condition of EUT................................................................................................ 3-2 3.6. Test Procedure...................................................................................................................... 3-2 3.7. Conducted Disturbance at Mains Terminals Test Results.................................................... 3-2 4. RADIATED EMISSION TEST ...................................................................................... 4-1 4.1. Test Equipment .................................................................................................................... 4-1 4.2. Block Diagram of Test Setup ............................................................................................... 4-2 4.3. Radiated Emission Limit Standard: FCC 15.209 and 15.249 .............................................. 4-3 4.4. EUT Configuration on Test.................................................................................................. 4-3 4.5. Operating Condition of EUT................................................................................................ 4-3 4.6. Test Procedure...................................................................................................................... 4-3 4.7. Radiated Emission Test Results ........................................................................................... 4-4 5. 20 DB BANDWIDTH TEST ........................................................................................... 5-1 5.1. Test Equipment .................................................................................................................... 5-1 5.2. Limit..................................................................................................................................... 5-1 5.3. Test Results .......................................................................................................................... 5-1 6. BAND EDGE COMPLIANCE TEST ............................................................................ 6-1 6.1. Test Equipment .................................................................................................................... 6-1 6.2. Limit..................................................................................................................................... 6-1 6.3. Test Produce ......................................................................................................................... 6-1 6.4. Test Results .......................................................................................................................... 6-1 7. ANTENNA REQUIREMENT ........................................................................................ 7-1 8. RADIO FRREQUENCY EXPOSURE COMPLIANCE.............................................. 8-1 9. TEST SOFTWARE.......................................................................................................... 9-1 10. DEVIATION TO TEST SPECIFICATIONS.............................................................. 10-1 11. PHOTOGRAPH OF TEST ........................................................................................... 11-1 11.1. Photos of Power Line Conducted Emission Test ............................................................... 11-1 11.2. Photos of Radiated Emission Test...................................................................................... 11-2 12. PHOTOGRAPH OF EUT ............................................................................................. 12-1 R AUD…

Text truncated - open the document above for the full version.

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:GV3M01314-D page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F15172 11-1 11. PHOTOGRAPH OF TEST 11.1. Photos of Power Line Conducted Emission Test R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:GV3M01314-D page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F15172 11-2 11.2.Photos of Radiated Emission Test R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:GV3M01314-D page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F15172 11-3 (Above 1000MHz)