H4IEDGEWOOJER STRAP

RF_160, Issue 04 Lite-on Technology Corp. Declaration of Authorization We Name: Lite-on Technology Corp. Address: 16F,392,Ruey Kuang Road,Neihu City: Taipei Country: Taiwan Declare that: Name Representative of agent: Ms. Melody Wu Agent Company name: BTL Inc. Address: 4F,No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist.114, City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: WOOJER STRAP Type designation: Strap Edge Trademark: Woojer Validity/ expiry date: From December 05, 2019 to December 04, 2020 on our behalf. Date: December 5, 2019 City: Taipei Name: Chris Chuang Function: Engineer Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name:Lite-on Technology Corp. Address :16F,392,Ruey Kuang Road,Neihu City:Taipei Country:Taiwan To: Telefication B.V.,Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject:Request for confidentiality FCC ID: H4IEDGE Reference number:###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicanthereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date:2019-12-05Name and signature of applicant:Chris Chuang Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 1 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 2 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 3 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 4 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 5 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 6 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 7 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 8 of 17

Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 9 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 10 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 11 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 12 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 13 of 17 Antenna Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 14 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 15 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 16 of 17 Appendix No.: EP-1909T001-1 APPENDIX-EUT PHOTOS Project No.: 1909T001 Page 17 of 17

Parts List SPH-R&D-1002C-05B PreliminaryVer : 0.1Page 1 of 4 Mass ProductionDate:2019/8/29 Item NoCustomer PNPart Number(ERP)Q'TYNew partsLocationRemark 1 820-02310-00A 1 △ USB1 SMT 2 820-00748-00A 2 S1,S6 SMT 3 820-02105-00A 4 S2,S3,S4,S5 SMT 4 818-70222-A5A 3* R10, R53, R55SMT 5 818-70203-95B 4 R13, R14, R18, R19 SMT 818-70103-A3A SMT 818-70103-A3C SMT 7 818-70104-A3A 2 R17, R30 SMT 8 818-70204-A5A 1 R46 SMT 9 818-76812-A5A 1* R51 SMT 818-70000-93A SMT 818-70000-A3A SMT 818-70000-A3C SMT 11 818-71623-A5A 1* R29 SMT 12 818-70105-A5A 1* R31 SMT 13 818-78662-A5A 1* R45 SMT 14 818-77152-A5B 1 R34 SMT 818-70101-A3A SMT 818-70101-A3B SMT 16 818-60000-93A 1 R5 SMT 17 818-71822-A5A 1 *R7 SMT 18 818-70153-A3A 2 R6, R9 SMT 19 818-70471-A5A 2 R2, R3 SMT 20 818-74992-95A 1 R39 SMT 21 818-70180-A3A 2 R1, R8 SMT 818-70102-A3A SMT 818-70102-A3D SMT 818-70821-A3A SMT 818-70821-A3B SMT 24 818-70201-A5A 1 R35 SMT Check: Wells Yang Resistor Resistor CHIP RES 1/16W +-1% 2.2K 0402 SMD TA-I,RM04FT2201 Resistor Res,820,1/16W,+/-5%,0402,WALSIN,SK3370 RES,200,1/16W,+/-1%,0402,GP,SK3882 1 RES,49.9K,1/16W,+-1%,0402 SA8071 RES,470,1/16W,+/-1%,0402,SM8121 RES,100,1/16W,+/-5%,0402,WALSIN,SK3370 RES,1K,1/16W,+/-5%,0402,WALSIN,SK3370 Approval: Jason Wang DOC No: Model No:SA8072 HIS-R&D Dept. Customer: Electrical Mechanical Packaging SW,SKSFABE010,Alpes,SA8071 SW,4.5*2.3*1.7,TA703501S02,SMD,4.5*2.3*1.7,SK6860 Woojer main board Switch SpecificationParts Name USB Type-C ,8.64*7.85*2.52,UB227DH-0166110P ,JXT,SA8072 TYPE-C Resistor Resistor RES,0,1/10W,+/-5%,0603,SM6520 Resistor Resistor RES,0,1/16W,+/-5%,0402,SM2065,GP RES,86.6KOhm,1%,0402,1/16W,RM04FT8662 RES,20K,+/-1%,1/16W,0402 SA8071,SA8071 RES,100K,1/16W,+/-5%,0402,SM7005 Resistor 23 R40 RES,1K,1/16W,+/-5%,0402,GP,GP R25, R26, R27,R28, R32, R33, R36, R37, R38, R42, R43, R47, Res,820,1/16W,+/-5%,0402,SM7005 C60,C61,R15, R16, R20, R21, R22, R23, R24,R28,R64,R44, 14 Resistor Switch RES,10K,1/16W,+/-5%,0402,WALSIN,SK3370 RES,10K,1/16W,+/-5%,0402,SK3370 RES,162KOhm,1%,0402,1/16W,RM04FT1623 Resistor RES,0,1/16W,+/-5%,0402,SM2065,GP RES,100,1/16W,+/-5%,0402,GP,SK6190 Resistor Resistor Prepare: Meggie Zhang 备注: (1)新材料“ * ”为ENG承认; (2)新材料“△ ”为RD承认;(3) RES,15K,1/16W,+/-5%,0402,SK5225 RES,18.2KOhm,1%,0402,1/16W,RM04FT1822 Resistor Resistor Resistor Resistor 10 RES,0,1/16W,+/-5%,0402,WALSIN,SK3370 2 RES,68.1KOhm,1%,0402,1/16W,RM04FT6812 CHIP-R 200000ohm 0.0625W +-1% Thick Film 50V 0402 TAPING Pb R52, R54 RES,1M,1/16W,+/-1%,0402,SM2065,GP RES,71.5KOhm,1%,0402,1/16W,TA-I,RM04FT7152 Resistor Resistor RES,18,1/16W,+/-5%,0402,SK3360 Resistor 6 Resistor 15 Resistor 22 5 R56, R57, R58, R59, R60,R62 13 SILITEK ELECTRONICS(DONGGUAN)CO.,LTD Parts List SPH-R&D-1002C-05B Preliminary Ver : 0.1Page 2 of 4 Mass ProductionDate: 2019/8/29 Item No Customer PNPart Number(ERP) Q'TYNew partsLocationRemark 25 818-70333-A3A 1 R41 SMT 26 818-70512-A3A 1 R63 SMT 27 818-70474-A3A 1 R65 SMT 28 818-60105-A3A 1 R66 SMT 29 820-02104-00A 2 J1,J2 SMT 30 819-00357-00A 2 Q1,Q3 SMT 30Z19-00356-00A 1 △ Q3 SMT 819-00034-00A SMT 819-00336-00A SMT 32 816-00192-00A 1 D1(blue) SMT 33 816-00439-00A 1△ D2(RG) SMT 34 822-00308-00A 1 L4 SMT 35 822-00400-00A 3 L1, L3,L11 SMT 36 822-00307-00A 1 L8 SMT 37 822-00007-00A 6△ L2, L7,L5,L6,L9,L10SMT 38 825-00315-00A 1 △ U5 SMT 39 825-00312-00A 2△ U7,U10 SMT 40 Z25-00313-00A825-00313-00A 1 △ U3 SMT 41 Z25-00313-00A826-00397-00A 1 △ U4 SMT 42 Z26-00786-00A826-00786-00A 1△ U9 SMT 43 Z25-00314-00A825-00314-00A 1△ U1 SMT 44 Z25-00227-00A825-00227-00A 1 U6 SMT 45 816-00430-00A 8 △ D3,D6, D7, D8, D9, D10, D11, D12 SMT 46 821-11580-00A 1△ U8 SMT 47 816-00351-00A 1 D4SMT 48 1 △ D5 SMT 49 820-02324-00A 1 △ J3 DIP 50 815-61150-89A 1 C20 SMT 51 815-34107-25A 2 C37, C39 SMT 52 815-54106-35C 4 C45, C56,C77,C78SMT ICdual operational amplifiers , 8P,SO-8,LMV358SG-13,SA8072 Transistor, NPN,150mA,50V,SOT23,TMBT3904,SK8163 Electrical Mechanical Packaging Capacitor Transistor,NPN,200MA,2N3904,PMBT3904,SINGLE,LF,SK3880 Specification LED,right angle,RG,SMD,LTST-S326KGJRKT,SA8072 RES,33K,1/16W,+/-5%,0402,sa8071 LED LTST-S270TBKT Blue SMD 5V 0.02A LITEON Single 180mcd 130deg Pb Free mosfet,P-CH,SOT-23,BC3401,SMD,SA8072 Parts Name Model No: Inductor,LQP15MN15NG02D (RoHS),15NH,0402,+/-2%,MURATA,SK3883 Woojer main board SCHOTTKY DIODE SOT-23 3P H=1.1 SMD DII,BAT54A-7-F 102400012897 LED MOSFET TVS diode,5V,SOD523,D5V0L1B2T-7,SA8072 Switch IC, SC70-6 ,4.5ohm Low Voltage ,SgMicro,SGM3157,SA8072 IC,Digital Audio Power Amplifier ,QFP48,TAS5731MPHPR,TI,SA8072 IC,LM4811MM,VSSOP-10,SA8071, same that for SA8071 RES,1M,1/10W,+/-5%,0603 ,GP,SK8815 Resistor Customer: SA8072 DOC No: HIS-R&D Dept. LED 2 Resistor Resistor Resistor USB filter,ON Semi,STF202-22T1G,TSOP-6,SA8072 RES,470K,1/16W,+/-5%,0402,SMD,SK7361 IC ESD IC,BQ24060DRCR,DRC,SA8071 Mosfet,P-CH,CJK3401A,SOT23,SMD,SA8072 IC IC CONN,3pin,pitch2.5,DIP180°,GWF-250352-103351J,SA8072 IC Capacitor C/C,100UF,6.3V,+/-20%,1206,X5R,SA8071 Capacitor C/C,15pf,50v,+/-2%,npo,0402,SM2065 Q2,Q4 Transistor31 CONN,PJ2U-3142A-3B1B-1,Chi-ban,SA8071 IC CHIP-R 5100ohm 0.0625W +-5% Thin Film 5V 0402 TAPING Pb Free IC,LDO,18 Vin, 3.3Vout,250mA,SOT23,ME6209A33M3G,SA8072 Phonejack Inductor MOSFET Connector Diode ESD IC IC, 20V Synchronous Boost Converter,QFN13,TPS611781RNWR,SA8072 C/C,10uF,10V,+/-20%,0603,X5R,SA8071 Inductor Inductor Inductor Diode B5817WS,SOD-323 Inductor,2.2UH,SMD,+/-20%,AMPI0630ED2R2MT,SK8071 Ferrite Beads 600+/-25%@100MHZ +-25% 2A 1206 Array BLM31PG601SN1L MURATA Pb Free FERRITE BEAD,0805,600Ohm@100MHz,≥5,SM6320 SILITEK ELECTRONICS(DONGGUAN)CO.,LTD 53 818-70000-93A 1 C15 SMT 54 815-64105-35A 14 C22, C33, C34, C35, C36, C38, C40, C42, C43, C44, C47, C62, C63, C64 SMT Check: Wells Yang Parts List SPH-R&D-1002C-05B Preliminary Ver : 0.1Page 3 of 4 Mass ProductionDate: 2019/8/29 Item No Customer PNPart Number(ERP) Q'TYNew partsLocationRemark 55 815-64105-66B 1 * C25SMT 56 815-54105-46D 1C48 SMT 57 815-64225-36D 1C66 SMT 58 815-62821-46A 1 * C58 SMT 59 815-51475-35…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-2-1909T001 Project No.: 1909T001 Page 1 of 3 Report Version: R00 FCC RF Exposure Report FCC ID: H4IEDGE Report No. : BTL-FCCP-2-1909T001 Equipment : WOOJER STRAP Model Name : Strap Edge Brand Name : Woojer Applicant : Lite-on Technology Corp. Address : 16F, 392 , Ruey Kuang Road, Neihu, Taipei 11492, Taiwan, R.O.C FCC Rule Part(s) : FCC Guidelines for Human Exposure IEEE C95.1 Date of Receipt : 2019/9/11 Date of Test : 2019/9/11 ~ 2019/11/25 Issued Date : 2019/12/13 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Peter Chen, Engineer Approved by : Scott Hsu, Deputy Manager BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Report No.: BTL-FCCP-2-1909T001 Project No.: 1909T001 Page 2 of 3 Report Version: R00 GENERAL CONCULUSION: According to FCC KDB447498 D01, Appendix A, SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison Appendix A - SAR Test Exclusion Thresholds for 100 MHz - 6 GHz and < 50 mm MHz 5 10 15 20 25 30 35 40 45 50 mm 150 39 77 116 155 194 232 271 310 349 387 SAR Test Exclusion Thresholds (mW) 300 27 55 82 110 137 164 192 219 246 274 450 22 45 67 89 112 134 157 179 201 224 835 16 33 49 66 82 98 115 131 148 164 900 16 32 47 63 79 95 111 126 142 158 1500 12 24 37 49 61 73 86 98 110 122 1900 11 22 33 44 54 65 76 87 98 109 2450 10 19 29 38 48 57 67 77 86 96 3600 8 16 24 32 40 47 55 63 71 79 5200 7 13 20 26 33 39 46 53 59 66 5400 6 13 19 26 32 39 45 52 58 65 5800 6 12 19 25 31 37 44 50 56 62 Table for Filed Antenna Ant. Brand Test Model Antenna Type Connector Gain (dBi) 1 N/A N/A PCB N/A -5.38 Report No.: BTL-FCCP-2-1909T001 Project No.: 1909T001 Page 3 of 3 Report Version: R00 Maximum measured transmitter power: Max. Output Power (dBm) Max. Output Power (mW) Limit (mW) 8.06 0.0048 10 The maximum measured output peak power of this EUT is 0.0048mW, less than 10mW at 5mm distance. ( Output power including tune up tolerance.) Conclusion: No SAR evaluation required since transmitter power is below FCC threshold. End of Test Report

Report No.: BTL-FCCP-1-1909T001 Project No.: 1909T001 Page 1 of 76 Report Version: R00 FCC Radio Test Report FCC ID: H4IEDGE Report No. : BTL-FCCP-1-1909T001 Equipment : WOOJER STRAP Model Name : Strap Edge Brand Name : Woojer Applicant : Lite-on Technology Corp. Address : 16F, 392 , Ruey Kuang Road, Neihu, Taipei 11492, Taiwan, R.O.C Radio Function : Bluetooth EDR FCC Rule Part(s) : FCC Part15, Subpart C (15.247) Measurement Procedure(s) : ANSI C63.4-2014 Date of Receipt : 2019/9/11 Date of Test : 2019/9/11 ~ 2019/11/25 Issued Date : 2019/12/13 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Peter Chen, Engineer Approved by : Scott Hsu , Vice Manager BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Report No.: BTL-FCCP-1-1909T001 Project No.: 1909T001 Page 2 of 76 Report Version: R00 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-1909T001 Project No.: 1909T001 Page 3 of 76 Report Version: R00 CONTENTS REPORT ISSUED HISTORY 5 1 SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 8 1.4 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 8 1.5 DUTY CYCLE 9 2 GENERAL INFORMATION 10 2.1 DESCRIPTION OF EUT 10 2.2 TEST MODES 12 2.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 2.4 SUPPORT UNITS 14 3 AC POWER LINE CONDUCTED EMISSIONS TEST 15 3.1 LIMIT 15 3.2 TEST PROCEDURE 15 3.3 DEVIATION FROM TEST STANDARD 15 3.4 TEST SETUP 16 3.5 TEST RESULT 16 4 RADIATED EMISSIONS TEST 17 4.1 LIMIT 17 4.2 TEST PROCEDURE 18 4.3 DEVIATION FROM TEST STANDARD 18 4.4 TEST SETUP 18 4.5 EUT OPERATING CONDITIONS 19 4.6 TEST RESULT – 9 KHZ TO 30 MHZ 20 4.7 TEST RESULT – 30 MHZ TO 1 GHZ 20 4.8 TEST RESULT – ABOVE 1 GHZ 20 5 NUMBER OF HOPPING CHANNEL 21 5.1 APPLIED PROCEDURES 21 5.2 TEST PROCEDURE 21 5.3 DEVIATION FROM STANDARD 21 5.4 TEST SETUP 21 5.5 EUT OPERATION CONDITIONS 21 5.6 TEST RESULTS 21 6 AVERAGE TIME OF OCCUPANCY 22 6.1 APPLIED PROCEDURES / LIMIT 22 6.2 TEST PROCEDURE 22 6.3 DEVIATION FROM STANDARD 22 6.4 TEST SETUP 22 6.5 EUT OPERATION CONDITIONS 22 6.6 TEST RESULTS 22 7 HOPPING CHANNEL SEPARATION MEASUREMENT 23 7.1 APPLIED PROCEDURES / LIMIT 23 7.2 TEST PROCEDURE 23 7.3 DEVIATION FROM STANDARD 23 7.4 TEST SETUP 23 7.5 TEST RESULTS 23 Report No.: BTL-FCCP-1-1909T001 Project No.: 1909T001 Page 4 of 76 Report Version: R00 8 BANDWIDTH TEST 24 8.1 APPLIED PROCEDURES 24 8.2 TEST PROCEDURE 24 8.3 DEVIATION FROM STANDARD 24 8.4 TEST SETUP 24 8.5 EUT OPERATION CONDITIONS 24 8.6 TEST RESULTS 24 9 OUTPUT POWER TEST 25 9.1 APPLIED PROCEDURES / LIMIT 25 9.2 TEST PROCEDURE 25 9.3 DEVIATION FROM STANDARD 25 9.4 TEST SETUP 25 9.5 EUT OPERATION CONDITIONS 25 9.6 TEST RESULTS 25 10 ANTENNA CONDUCTED SPURIOUS EMISSION 26 10.1 APPLIED PROCEDURES / LIMIT 26 10.2 TEST PROCEDURE 26 10.3 DEVIATION FROM STANDARD 26 10.4 TEST SETUP 26 10.5 EUT OPERATION CONDITIONS 26 10.6 TEST RESULTS 26 11 LIST OF MEASURING EQUIPMENTS 27 12 EUT TEST PHOTO 29 13 EUT PHOTOS 29 APPENDIX A AC POWER LINE CONDUCTED EMISSIONS 30 APPENDIX B RADIATED EMISSIONS - 9 KHZ TO 30 MHZ 33 APPENDIX C RADIATED EMISSIONS - 30 MHZ TO 1 GHZ 38 APPENDIX D RADIATED EMISSIONS - ABOVE 1 GHZ 41 APPENDIX E NUMBER OF HOPPING CHANNEL 58 APPENDIX F AVERAGE TIME OF OCCUPANCY 60 APPENDIX G HOPPING CHANNEL SEPARATION MEASUREMENT 63 APPENDIX H BANDWIDTH 66 APPENDIX I OUTPUT POWER 69 APPENDIX J ANTENNA CONDUCTED SPURIOUS EMISSION 72 Report No.: BTL-FCCP-1-1909T001 Project No.: 1909T001 Page 5 of 76 Report Version: R00 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. 2019/12/13 Report No.: BTL-FCCP-1-1909T001 Project No.: 1909T001 Page 6 of 76 Report Version: R00 1 SUMMARY OF TEST RESULTS Test procedures according to the technical standards. FCC Part 15, Subpart C (15.247) Standard(s) Section Description Test Result Judgement Remark 15.207 AC Power Line Conducted Emissions APPENDIX A Pass ------ 15.205 15.209 15.247(d) Radiated Emissions …

Text truncated - open the document above for the full version.

Appendix No.: TP-1909T001-1 APPENDIX-TEST PHOTOS Project No.: 1909T001 Page 1 of 4 AC Power Line Conducted Emissions test photos Appendix No.: TP-1909T001-1 APPENDIX-TEST PHOTOS Project No.: 1909T001 Page 2 of 4 Radiated emissions test photos 9 kHz to 30 MHz Appendix No.: TP-1909T001-1 APPENDIX-TEST PHOTOS Project No.: 1909T001 Page 3 of 4 Radiated emissions test photos 30 MHz to 1 GHz Appendix No.: TP-1909T001-1 APPENDIX-TEST PHOTOS Project No.: 1909T001 Page 4 of 4 Radiated emissions test photos Above 1 GHz