H4IKB3322WWireless Keyboard

Dell Wireless Keyboard and Mouse KM3322W Quick Start Guide 1 Dell Wireless Keyboard and Mouse KM3322W Quick Start Guide 1 2 3 OFF ON P8P38 A00 © 2021 Dell Inc. or its subsidiaries. 2021-07 2 3 Device 1 3 4 2 2 1 2.4 GHz Warranty, Safety, Environmental, and Regulatory Information Regulatory Notices For Electromagnetic Compatibility (EMC), regulatory information and Safety Best Practices information, see the Regulatory Compliance home page on Dell.com at the following location: Dell.com/regulatory_compliance. Dell has determined that this product is a Class B harmonized product. This product may contain built-in laser devices. To prevent any risk of exposure to laser radiation, do not disable or open the product assembly for any reason. The product comply with safety requirements and are classified as Class 1 Laser Products, under the US DHHS Standard and IEC/EN 60825-1:2014 Laser Safety Standard. This device contain no user adjustments or any user serviceable or replaceable parts. Réglementations Pour en savoir plus sur la Compatibilité électromagnétique (EMC) et pour obtenir des informations sur les réglementations et les pratiques d’excellence en matière de sécurité, voir la page d’accueil Conformité aux réglementations sur Dell.com à l’emplacement suivant : Dell.com/regulatory_compliance. Dell a déterminé que ce produit est un produit harmonisé de classe B. Ce produit peut contenir des périphériques à laser intégré. Afin de prévenir tout risque d’exposition au rayonnement laser, ne désactivez jamais et n’ouvrez jamais un assemblage de produit, et ce sous aucun prétexte. Ce produit est conforme aux normes de sécurité et est classé « Produits laser de classe 1 » d’après la norme américaine DHHS et la norme de sécurité laser IEC/EN 60825-1:2014. Ce périphérique ne permet aucun réglage par l’utilisateur ni ne contient aucune pièce réparable ou remplaçable. Zulassungsinformationen Informationen über elektromagnetische Kompatibilität (Electromagnetic Compatibility, EMC), behördliche Auflagen und Informationen zu bewährte Vorgehensweisen bezüglich der Sicherheit finden Sie auf der Seite zur Einhaltung behördlicher Auflagen auf Dell.com unter:Dell.com/regulatory_compliance. Dell hat sich vergewissert, dass dieses Produkt den Bestimmungen von Klasse B entspricht. Dieses Produkt enthält möglicherweise integrierte Lasergeräte. Um eine Gefährdung durch Laserstrahlen zu vermeiden, sollten Sie in keinem Fall die Produktbaugruppe öffnen oder blockieren. Dieses Produkt entspricht den Sicherheitsanforderungen für Laserprodukte der Klasse 1 gemäß US DHHS-Standard und Norm IEC/EN 60825-1:2014, Sicherheit von Lasereinrichtungen. Für dieses Produkt sind weder Eingriffe durch den Benutzer noch die Wartung oder der Austausch von Teilen vorgesehen. Avisos de regulamentares Para obter informações sobre compatibilidade eletromagnética, informações regulamentares e informações sobre as boas práticas de segurança, consulte o site de conformidade regulamentar em Dell.com no seguinte local: Dell.com/regulatory_compliance. A Dell determinou que este é um produto harmonizado Classe B. Este produto pode conter dispositivos a laser. Para evitar o risco de exposição à radiação laser, não desmonte nem abra o produto por nenhuma razão. Este produto está em conformidade com os requisitos de segurança e é classificado como “Produtos a laser Classe 1” pelo US DHHS Standard (Norma US DHHS) e pelo IEC/EN 60825-1:2014 Laser Safety Standard (Norma de segurança laser IEC/EN 60825-1:2014). Este dispositivo não contém ajustes que possam ser feitos pelo usuário e nem peças que possam ser reparadas ou trocadas pelo usuário. Notificaciones reglamentarias Para conocer la Compatibilidad Electromagnética (EMC), información reglamentaria y mejores prácticas de seguridad, consulte la página de inicio sobre Conformidad reglamentaria en el sitio Dell.com en la siguiente dirección: Dell.com/regulatory_compliance. Dell ha determinado que este producto es un producto Clase B armonizado. Este producto puede contener dispositivos láser incorporados. Para evitar los riesgos de exposición a la radiación del láser, no desactive ni abra el ensamblaje del producto por ningún motivo. El producto cumple con los requisitos de seguridad y está clasificado como Producto láser de Clase 1 según la norma del DHHS de EE. UU. y la norma de seguridad sobre productos láser CEI/EN 60825-1:2014. Este dispositivo no contiene ajustes por parte del usuario, ni tiene piezas que este pueda reparar o sustituir. Нормативна інформація Щоб переглянути інформацію про електромагнітну сумісність (ЕМС), відповідність нормативам і передовий досвід у сфері техніки безпеки, відкрийте головну сторінку розділу “Відповідність нормативам” на сайті Dell.com за веб-адресою Dell.com/regulatory_compliance. Компанія Dell визначила, що цей виріб є гармонізованим продуктом Класу B. Виріб може містити вбудовані лазерні пристрої. Щоб уникнути впливу лазерного випромінювання, за жодних обставин не розбирайте та не відкривайте виріб. Виріб відповідає вимогам техніки безпеки та класифікований як лазерне обладнання Класу 1 відповідно до стандарту DHHS (США) та стандарту щодо безпеки лазерного обладнання IEC/EN 60825-1:2014. Пристрій не передбачає регулювання користувачем і не містить будь-яких компонентів, що підлягають обслуговуванню чи заміні. Các thông báo quy định Về Tương thích điện từ (EMC), thông tin về quy định và thông tin về Phương pháp thực hành an toàn tốt nhất, xem trang chủ về Tuân thủ quy định tại Dell.com tại địa chỉ sau: Dell.com/regulatory_compliance. Dell đã xác định sản phẩm này là sản phẩm phù hợp với Loại B. Sản phẩm này có thể chứa các thiết bị laser tích hợp. Để tránh mọi rủi ro tiếp xúc với bức xạ laser, không hủy kích hoạt hoặc mở các bộ phận của sản phẩm vì bất kỳ lý do gì. Sản phẩm tuân thủ các yêu cầu về an toàn và được phân loại thành Sản phẩm Laser Loại 1, theo Tiêu chuẩn của Bộ Dịch vụ Sức khỏe và Nhân sinh Hoa Kỳ và Tiêu chuẩn An toàn Laser IEC/EN 60825-1:2014. …

Text truncated - open the document above for the full version.

Lite-On Technology Corporation 392, Ruey Kuang Road, Neihu, Taipei 11492, Taiwan, R.O.C TEL: 02-8798-2888 FAX: 02-8793-6852 Date:2021-08-18 FCC ID:H4IKB3322W To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- &KULV&KXDQJ(0&6DIHW\(QJLQHHU /LWH2Q7HFKQRORJ\&RUSRUDWLRQ 7HO([W )D[ (0DLO&KULV&KXDQJ#OLWHRQFRP

Date: 2021-08-18 FCC ID:H4IKB3322W To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-termconfidential treatment for the following information until180 days after the Grant Date of Equipment Authorization) in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------- Chris Chuang/ EMC/Safety Engineer Lite-On Technology Corporation Tel: 886-2-8798-2888 Ext 3248 Fax: 886-2-8793-6852 E-Mail: [email protected]

Date: 2021-08-18 FCC ID:H4IKB3322W A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: Lite-On Technology Corporation hereby authorizesAndrea Hsia/ Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch(“BV CPS Taoyuan”),to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia/ Supervisorof BV CPS Taoyuan on Lite-On Technology Corporation’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Chris Chuang/ EMC/Safety Engineer Lite-On Technology Corporation Tel: 886-2-8798-2888 Ext 3248 Fax: 886-2-8793-6852 E-Mail: [email protected]

Reference No.:BEKC-WTW-P21070616-ExtPho Page 1/3 CONSTRUCTION PHOTOS OF EUT Reference No.:BEKC-WTW-P21070616-ExtPho Page 2/3 Reference No.:BEKC-WTW-P21070616-ExtPho Page 3/3

Rating(额定电压电流):3V 30mA IS 13252(Part 1)/ IEC 60950-1 R-41000876 Made in China(中国制造) M/N(型号):KB3322Wt Wireless Keyboard 无线键盘 FCC ID:H4IKB3322W barcode Address for EU Only: Raheen Business Park Limerick Ireland E 1 4 56 1 4 C3 IFT:XXXXXXXXX-XXXX www.bis.gov.in XXXXX/SDPPI/2019 5100 CAN ICES-003(B)/NMB-003(B) C-XXXXX 005 21 N°D’AGRÉMENT MR25652 ANRT 2021 (XX/XX/202X) TA-2020/XXXX APPROVED NCAAPPROVED: XXX-XX-XXX-XXX OMAN-TRA TRA/TR-R/10019/20 DXXXXXX ER90070/20 XXXXXXX/10 Complies with IMDA Standards DA104808 Approved by PTA TAC NO: X.XXXX/2020 CIDF15000022 For UK only: Cain Road, Bracknell, RG12 1LF 1:1 SUBTEL: XXXXX CN-0J5K9F-LO300- 16M-K0XD-A00 Made In China DP/N0J5K9F Mfg Date: Jun.2021 DELL www.dell.com/ regulatory_Compliance Keyboard

Reference No.:BEKC-WTW-P21070616-IntPho Page 1/3 CONSTRUCTION PHOTOS OF EUT Reference No.:BEKC-WTW-P21070616-IntPho Page 2/3 Reference No.:BEKC-WTW-P21070616-IntPho Page 3/3

Report No.: SABEKC-WTW-P21070616 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SABEKC-WTW-P21070616 FCC ID: H4IKB3322W Test Model: KB3322Wt Received Date: 2021/7/19 Test Date: 2021/7/23 Issued Date: 2021/8/23 Applicant: LITE-ON Technology Corp. Address: 16F, 392, Ruey Kuang Road, Neihu, Taipei 11492, Taiwan, R.O.C Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SABEKC-WTW-P21070616 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Evaluation Result .................................................................................................................................. 5 3 SAR Test Exclusion Thresholds .......................................................................................................... 6 4 Conclusion ............................................................................................................................................ 6 Report No.: SABEKC-WTW-P21070616 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SABEKC-WTW-P21070616 Original release. 2021/8/23 Report No.: SABEKC-WTW-P21070616 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Wireless Keyboard Brand: DELL Test Model: KB3322Wt Sample Status: Engineering sample Applicant: LITE-ON Technology Corp. Test Date: 2021/7/23 Standards: FCC Part 2 (Section 2.1093) References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: 2021/8/23 Annie Chang / Senior Specialist Approved by : , Date: 2021/8/23 Rex Lai / Associate Technical Manager Report No.: SABEKC-WTW-P21070616 Page No. 5 / 6 Report Format Version: 6.1.1 2 Evaluation Result Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  .  rounded to the nearest mW and mm before calculation.  The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SABEKC-WTW-P21070616 Page No. 6 / 6 Report Format Version: 6.1.1 3 SAR Test Exclusion Thresholds Maximum measured transmitter power: Frequency (GHz) Max. AV Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 2) 1-g SAR test exclusion thresholds Result 2.405 ~ 2.474 2.393 5 0.741 3 Pass Note: 1. Determining compliance based on the res…

Text truncated - open the document above for the full version.

Report No.: RFBEKC-WTW-P21070616 Page No. 1 / 32 Report Format Version: 6.1.1 FCC Test Report Report No.: RFBEKC-WTW-P21070616 FCC ID: H4IKB3322W Test Model: KB3322Wt Received Date: 2021/7/19 Test Date: 2021/7/23 Issued Date: 2021/8/23 Applicant: LITE-ON Technology Corp. Address: 16F, 392, Ruey Kuang Road, Neihu, Taipei 11492, Taiwan, R.O.C Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RFBEKC-WTW-P21070616 Page No. 2 / 32 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 7 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 8 3.3 Duty Cycle of Test Signal .................................................................................................................... 9 3.4 Description of Support Units ............................................................................................................. 10 3.4.1 Configuration of System under Test .................................................................................................. 10 3.5 General Description of Applied Standards and References ............................................................. 10 4 Test Types and Results ....................................................................................................................... 11 4.1 Radiated Emission and Bandedge Measurement .............................................................................. 11 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................... 11 4.1.2 Test Instruments ................................................................................................................................ 12 4.1.3 Test Procedures ................................................................................................................................. 13 4.1.4 Deviation from Test Standard ............................................................................................................ 13 4.1.5 Test Setup .......................................................................................................................................... 14 4.1.6 EUT Operating Conditions ................................................................................................................. 15 4.1.7 Test Results ....................................................................................................................................... 16 4.2 6dB Bandwidth Measurement ........................................................................................................... 21 4.2.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 21 4.2.2 Test Setup .......................................................................................................................................... 21 4.2.3 Test Instruments ................................................................................................................................ 21 4.2.4 Test Procedure .................................................................................................................................. 22 4.2.5 Deviation from Test Standard ................................................…

Text truncated - open the document above for the full version.

Reference No.: RFBEKC-WTW-P21070616 Page No. 1 / 2 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST <Frequency Range below 1GHz> Reference No.: RFBEKC-WTW-P21070616 Page No. 2 / 2 RADIATED EMISSION TEST <Frequency Range above 1GHz>