H4IKB9060Wireless Keyboard

SK-9060 Wireless Keyboard /SD-9081 USB Transceiver Product Guide Getting Started Thank you for choosing this 2.4G Wireless Keyboard Kits. It operates with digital radio technology to ensure no hinder communication between the keyboard and your computer without connecting cable. The transmission and receiving of keyboard are free from angle restriction. Preparing keyboard and Dongle Before working with your new keyboard, look at the "Hardware Installation", and take a few one-time preparations. Hardware Installation ● Place the dongle at least 20 cm from other electrical devices (e.g. monitor) to achieve optimum performance. ● The distance between the keyboard and dongle should not exceed 10 M. ● Do not place the dongle on metal surfaces. Step 1: Connect the receiver ● Plug the dongle connector into an USB port. ● SYSTEM will take around 10 sec to find your keyboard and mouse automatically. Step 2: Insert batteries Inserting batteries in keyboard The keyboard requires two alkaline batteries (AAA). ● Remove the battery compartment cover on the bottom of the keyboard by pushing it in the direction of arrow. ● Insert two AAA batteries. The illustration in the battery compartment shows how to insert the batteries properly. ● Recover the battery compartment by pushing the locking lug under the battery compartment. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Use and replace only with correct size and type (alkaline or zinc-carbon)of battery. Working Keyboard USB Transceiver and keyboard electrical specification The Transceiver will have one main function: translate radio communications from the mouse to the PC via USB Full Speed USB Specification Compliance., meets Universal Serial Bus Specification version 2.0. Support USB Suspend Mode. Keyboard The following description of few keys applies for the operating systems that support these functions (e.g. Windows 2000/XP/Vista/Windows 7). Vista Key Press Vista key to open Start Manu Application keyPress Application key is same as Right Mouse key to open function Manu Previous TrackCombine keys to skip to the forward title in the active player. Play/Pause Combine keys to Start or Pause the soundtrack in active player. „ Stop Combine keys to end the soundtrack or video. Next Track Combine keys to skip to the next title in the active player. My Computer Open My Computer folder. Mute Press this key to On/Off the volume. Volume down Press this key to decreasing the volume. Volume Up Press this key to increasing the volume. Calculate Activate the Windows defaults Calculate Search Activate the OS default search function E-mail Use this key to start the standard e-mail program for your system Technical data Designation Value Modulation GFSK Operating Frequency 2403MHz~2480MHz channel 78 channel 2.4GHz ISM Band Storage temperature –20 °C ... +60 °C Operating temperature 0 °C ... +40 °C Keyboard Battery type two alkaline batteries, type AAA Keyboard Supply voltage 2.2~3.3V Keyboard Current consumption max. 50 mA USB Transceiver Supply voltage DC 5.0 V ±5 % USB Transceiver Current consumption max..100 mA FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. This Class B device complies with part 15 of the FCC rules,Canadian ICES-003,RSS-210.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. IMPORTANT BATTERY INFORMATION ● Keep batteries out of reach of children. ● Insert the batteries in the proper direction as indicated by the positive (+) and negative (-) markings in the battery compartment. ● Do not mix old and new batteries or batteries of different types (for example, carbon and alkaline batteries). ● Always remove old, weak, or worn-out batteries promptly and recycle or proper disposal of them in accordance with Local and National Disposal Regulations. ● If a battery leaks, remove all batteries and recycle or dispose of them in accordance with the battery manufacture's instructions and Local and National Disposal Regulations. Before inserting new batteries, thoroughly clean the compartment with a damp paper towel, or follow the battery manufacture's recommendations for cleanup. If fluid from the battery comes into contact with skin or clothes, flush skin with water immediately. ● Remove the batteries if your device is to be stored for an extended period of time without being used. PRODUCT DISPOSAL INFORMATION Dispose of this product in accordance with Local and National Disposal Regulations

LITE-ON TECHNOLOGY CORP. 90, Chien 1 Road, Chung Ho, Taipei Hsien 235,Taiwan, R.O.C Tel:886-2-22226181 Fax:886-2-22231519 http://www.liteon.com Lite-on Technology Corp. June. 21, 2010 Federal Communications Commission Authorization and Evaluation Division FCC IDH4IKB9060 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1. Block Diagram 2. Circuit Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Name/Title: Shirly Kuo / Engineer Company Name: LITE-ON Technology Corp. Address: No.90, Chien 1Rd., Chun-Ho, Taipei Hsien235, Taiwan, R.O.C TEL: 2222-6181#6115 FAX: 2223-1519 Email: [email protected]

LITE-ON TECHNOLOGY CORP. 90, Chien 1 Road, Chung Ho, Taipei Hsien 235,Taiwan, R.O.C Tel:886-2-22226181 Fax:886-2-22231519 http://www.liteon.com Lite-on Technology Corp. June. 21, 2010 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Compliance Certification Services Inc. Address: No. 11, Wugong 6 th Rd., Wugu Towership, Taipei County 24891, Taiwan Mr. James Lee Job Title: Section Manager Email: [email protected] I am therefore responsible for the contents of the application. Brand Name and Model Name of the specified radio equipment: LITE-ON / FCC ID: H4IKB9060 Product Name: Wireless Keyboard Signature____________________ Name/Title: Shirly Kuo / Engineer Company Name: LITE-ON Technology Corp. Address: No.90, Chien 1Rd., Chun-Ho, Taipei Hsien235, Taiwan, R.O.C TEL: 2222-6181#6115 FAX: 2223-1519 Email: [email protected]

Compliance Certification Services Inc. Report No.: T100602008 Date of Issue: June 14, 2010 A1 - 1 Total Page: 6 Rev. 00 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT

947.11929.11B N0O TL.:171 SBUJOH 4W 61nB NBEF!JO!DIJOB T0O; Q0O; NOTE: 1.MATERIAL P-SYNTHETI APER,THICKNESS:0.08mm. 2.Background and Serial number color:Black. 3.Text and Serial number background Color:White. 4.DAS IN O ACTORY SIT RINTING. 5. PART NUMBER ;!947.11929.11B GDD!JE;!I5JLC:171 7/SPIT LITE-ON This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions(1)This device may not cause harmful interference and (2)This device must accept any interference received, including interference that may cause undesired operation 111111.jpg

Compliance Certification Services Inc. Report No.: T100602008 Date of Issue: June 14, 2010 A1 - 2 Rev. 00 INTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T100602008 Date of Issue: June 14, 2010 A1 - 3 Rev. 00 Compliance Certification Services Inc. Report No.: T100602008 Date of Issue: June 14, 2010 A1 - 4 Rev. 00 Compliance Certification Services Inc. Report No.: T100602008 Date of Issue: June 14, 2010 A1 - 5 Rev. 00 Compliance Certification Services Inc. Report No.: T100602008 Date of Issue: June 14, 2010 A1 - 6 Rev. 00 PCB Antenna

SK-9060 Operational Description Getting Started Thank you for choosing this 2.4G Wireless Keyboard Kits. It operates with digital radio technology to ensure no hinder communication between the keyboard and your computer without connecting cable. The transmission and receiving of keyboard are free from angle restriction. Preparing keyboard and Dongle Before working with your new keyboard, look at the "Hardware Installation", and take a few one-time preparations. Hardware Installation ● Place the dongle at least 20 cm from other electrical devices (e.g. monitor) to achieve optimum performance. ● The distance between the keyboard and dongle should not exceed 10 M. ● Do not place the dongle on metal surfaces. Step 1: Connect the receiver ● Plug the dongle connector into an USB port. ● SYSTEM will take around 10 sec to find your keyboard and mouse automatically. Step 2: Insert batteries Inserting batteries in keyboard The keyboard requires two alkaline batteries (AAA). ● Remove the battery compartment cover on the bottom of the keyboard by pushing it in the direction of arrow. ● Insert two AAA batteries. The illustration in the battery compartment shows how to insert the batteries properly. ● Recover the battery compartment by pushing the locking lug under the battery compartment. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Use and replace only with correct size and type (alkaline or zinc-carbon)of battery. Working Keyboard USB Transceiver and keyboard electrical specification The Transceiver will have one main function: translate radio communications from the mouse to the PC via USB Full Speed USB Specification Compliance., meets Universal Serial Bus Specification version 2.0. Support USB Suspend Mode. Keyboard The following description of few keys applies for the operating systems that support these functions (e.g. Windows 2000/XP/Vista/Windows 7). Vista Key Press Vista key to open Start Manu Application keyPress Application key is same as Right Mouse key to open function Manu Previous TrackCombine keys to skip to the forward title in the active player. Play/Pause Combine keys to Start or Pause the soundtrack in active player. „ Stop Combine keys to end the soundtrack or video. Next Track Combine keys to skip to the next title in the active player. My Computer Open My Computer folder. Mute Press this key to On/Off the volume. Volume down Press this key to decreasing the volume. Volume Up Press this key to increasing the volume. Calculate Activate the Windows defaults Calculate Search Activate the OS default search function E-mail Use this key to start the standard e-mail program for your system Technical data Designation Value Modulation GFSK Operating Frequency 2403MHz~2480MHz channel 78 channel 2.4GHz ISM Band Storage temperature –20 °C ... +60 °C Operating temperature 0 °C ... +40 °C Keyboard Battery type two alkaline batteries, type AAA Keyboard Supply voltage 2.2~3.3V Keyboard Current consumption max. 50 mA USB Transceiver Supply voltage DC 5.0 V ±5 % USB Transceiver Current consumption max..100 mA

T100602008- CCS WUGU Antenna Pattern Application: LITE-ON Technology Corp. Model: SK-9060 Antenna Type: PCB Antenna Antenna Gain: -3.7 dBi Job No.:990611-k/b-2403-E Date:2010/6/11 Time: 06:57 Temp.()/Hum.(%):25/80% Tested by: Mark.Y Center freq.(MHz): 2403 Polarization : E Plane Max gain(dBi):-3.70 Min gain(dBi):-17.44 Avg gain(dBi):-7.54 T100602008- CCS WUGU Antenna Pattern Job No.:990611-k/b-2403-H Date:2010/6/11 Time: 06:55 Temp.()/Hum.(%):25/80% Tested by: Mark.Y Center freq.(MHz): 2403 Polarization : H Plane Max gain(dBi):-13.31 Min gain(dBi):-48.02 Avg gain(dBi):-19.01 T100602008- CCS WUGU Antenna Pattern Job No.:990611-kb-2441-E Date:2010/6/11 Time: 07:01 Temp.()/Hum.(%):25/80% Tested by: Mark.Y Center freq.(MHz): 2441 Polarization : E Plane Max gain(dBi):-4.55 Min gain(dBi):-20.33 Avg gain(dBi):-8.84 T100602008- CCS WUGU Antenna Pattern Job No.:990611-kb-2441-H Date:2010/6/11 Time: 07:02 Temp.()/Hum.(%):25/80% Tested by: Mark.Y Center freq.(MHz): 2441 Polarization : H Plane Max gain(dBi):-15.57 Min gain(dBi):-38.71 Avg gain(dBi):-20.76 T100602008- CCS WUGU Antenna Pattern Job No.:990611-kb-2480-E Date:2010/6/11 Time: 07:05 Temp.()/Hum.(%):25/80% Tested by: Mark.Y Center freq.(MHz): 2480 Polarization : E Plane Max gain(dBi):-5.13 Min gain(dBi):-19.25 Avg gain(dBi):-10.30 T100602008- CCS WUGU Antenna Pattern Job No.:990611-kb-2480-H Date:2010/6/11 Time: 07:04 Temp.()/Hum.(%):25/80% Tested by: Mark.Y Center freq.(MHz): 2480 Polarization : H Plane Max gain(dBi):-16.15 Min gain(dBi):-31.45 Avg gain(dBi):-21.31

Compliance Certification Services Inc. Report No.: T100602008-RP1 FCC ID: H4IKB9060 Date of Issue: June 14, 2010 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 Total Page: 30 Rev. 00 FCC 47 CFR PART 15 SUBPART C TEST REPORT For Wireless Keyboard Model Number: SK-9060 Trade Name: LITE-ON Issued to LITE-ON Technology Corp. No.90, Chien 1Rd., Chun-Ho, Taipei Hsien235, Taiwan, R.O.C Issued by Compliance Certification Services Inc. No. 11, Wu-Gong 6 th Rd., Wugu Industrial Park, Taipei Hsien 248, Taiwan (R.O.C.) http://www.ccsrf.com [email protected] Compliance Certification Services Inc. Report No.: T100602008-RP1 FCC ID: H4IKB9060 Date of Issue: June 14, 2010 Page 2 Rev. 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION................................................................................................. 3 2. EUT DESCRIPTION....................................................................................................................... 4 3. TEST METHODOLOGY................................................................................................................ 5 3.1 EUT CONFIGURATION................................................................................................................. 5 3.2 EUT EXERCISE............................................................................................................................. 5 3.3 GENERAL TEST PROCEDURES...................................................................................................... 5 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS ................................................. 6 3.5 DESCRIPTION OF TEST MODES.................................................................................................... 7 4. INSTRUMENT CALIBRATION.................................................................................................... 8 4.1 MEASURING INSTRUMENT CALIBRATION............................................................................... 8 4.2 MEASUREMENT EQUIPMENT USED .................................................................................. 8 4.3 MEASUREMENT UNCERTAINTY ........................................................................................ 9 5. FACILITIES AND ACCREDITATIONS ..................................................................................... 10 5.1 FACILITIES ................................................................................................................................ 10 5.2 EQUIPMENT...............................................................................................................................10 5.3 TABLE OF ACCREDITATIONS AND LISTINGS.............................................................................. 11 6. SETUP OF EQUIPMENT UNDER TEST.................................................................................... 12 6.1 SETUP CONFIGURATION OF EUT................................................................................................ 12 6.2 SUPPORT EQUIPMENT ........................................................................................................ 12 7. FCC PART 15.249 REQUIREMENTS......................................................................................... 13 7.1 20 DB BANDWIDTH.............................................................................................................. 13 7.2 BAND EDGES MEASUREMENT ......................................................................................... 16 7.3 SPURIOUS EMISSION .......................................................................................................... 21 7.4 POWERLINE CONDUCTED EMISSIONS ........................................................................... 29 APPENDIX I PHOTOGRAPHS OF TEST SETUP ............................................................................ 30 APPENDIX 1 - PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T100602008-RP1 FCC ID: H4IKB9060 Date of Issue: June 14, 2010 Page 3 Rev. 00 1. TEST RESULT CERTIFICATION Applicant: LITE-ON Technology Corp. No.90, Chien 1Rd., Chun-Ho, Taipei Hsien235, Taiwan, R.O.C Equipment Under Test: Wireless Keyboard Trade Name: LITE-ON Model Number: SK-9060 Date of Test: June 7 ~ 8, 2010 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2003 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements emission limits of FCC Rules Part 15.207, 15.209 and 15.249. The test results of this report relate only to the tested sample identified in this report. Approved by: Reviewed by: Rex Lai Gina Lo Section Manager Section Manager Compliance Certification Services Inc. Compliance Certification Services Inc. Compliance Certification Services Inc. Report No.: T100602008-RP1 FCC ID: H4IKB9060 Date of Issue: June 14, 2010 Page 4 Rev. 00 2. EUT DESCRIPTION Product Wireless Keyboard Trade Name LITE-ON Model Number SK-9060 Model Discrepancy N/A Power Supply Powered by AAA batteries × 2 (DC: 3V) Frequency Range 2403 ~ 2480 MHz Frequency Spacing 1MHz Frequency Number 78 Channels Modulation Technique GFSK Antenna Gain -3.7 dBi Antenna Designation PCB Antenna Remark: 1. The sample selected for test was production product and was provided by manufacturer. 2. This submittal(s) (test report) is intended for FCC ID: H4IKB9060 filing to comply with Section 15.107, 15.109, 15.207, 15.209, 15.249 (FCC Par…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Report No.: T100602008-RP1 FCC ID: H4IKB9060 Date of Issue: June 14, 2010 Page 30 Rev. 00 APPENDIX I PHOTOGRAPHS OF TEST SETUP RADIATED EMISSION SET UP PHOTOS