H4IMS2063Wireless Mouse

SM-2063 Wireless Mouse /SD-9080 USB Dongle Product Guide Getting Started Thank you for choosing this 2.4G Wireless Mouse Kits. It operates with digital radio technology to ensure no hinder communication between the mouse and your computer without connecting cable. The transmission and receiving of mouse are free from angle restriction. Preparing mouse and Dongle Before working with your new mouse, look at the "Hardware Installation", and take a few one-time preparations. Hardware Installation ● Place the receiver at least 20 cm from other electrical devices (e.g. monitor) to achieve optimum performance. ● The distance between the mouse and receiver should not exceed 10 M. ● Do not place the receiver on metal surfaces. ● Do not move optical mouse on following surface - Glass or any transparent materials; Mirror or reflecting surface; Mouse pad with too many colors; Rough surface. Step 1: Connect the Receiver ● Plug the receiver connector into an USB port. ● SYSTEM will take around 10 sec to find your keyboard and mouse automatically. Step 2: Insert batteries Inserting batteries in mouse The mouse requires two alkaline AA battery. ● Open the battery compartment cover on the bottom of the mouse. ● First push the battery puller in then insert two AA battery into battery compartment. ● Fix the battery compartment cover on the bottom of mouse again. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Use and replace only with correct size and type (alkaline or zinc-carbon)of battery. Working mouse Receiver and mouse electrical specification Iin addition to two buttons, the mouse also has a wheel that can be used as follows: ● As a 3rd button: press on the wheel. ● For scrolling, e.g. in documents or on Internet pages: turn the wheel forward or back. The Receiver will have one main function: translate radio communications from the mouse to the PC via USB Full Speed USB Specification Compliance., meets Universal Serial Bus Specification version 2.0. Support USB Suspend Mode. Designation Value Modulation GFSK Operating Frequency 2403MHz~2480MHz channel 78 channel 2.4GHz ISM Band Storage temperature –20 °C ... +60 °C Operating temperature 0 °C ... +40 °C Mouse Battery type Two alkaline battery, type AA Mouse Supply voltage 3V(2.2~3.3V) Mouse Current consumption max. 30 mA Receiver Supply voltage DC 5.0 V ±5 % Receiver Current consumption max..100 mA FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. This Class B device complies with part 15 of the FCC rules, Canada ICES-003,RSS-210.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment Laser and LED Specifications: Laser Mouse: This device complies with International Standard IEC 60825-1: (1993), +A1+A2(IEC 60825-1:2001-8) for a class1. Class 1 Laser Device Beam description: Collimated (parallel)beam of infrared light(invisible to the user) Laser power output:<716 microwatts(at 832 nanometers) to 834 microwatts(at 865 nanometers) Emitted laser wavelength:nominal:850 nanometers, range:(832-865 nanometers) A Class 1 laser product is safe under reasonably foreseeable conditions of operation as described by IEC 60825-1. However,it is recommended that you not direct the laser beam(which is emitted from the bottom of the device)at anyone’s eyes. Optical(LED) Mouse: This device complies with International Standard IEC 60825-1: (1993), +A1+A2(IEC 60825-1:2001-8) . This product uses LEDs that are consider Class1 (IEC 60825-1:1993+A1+A2) LED power output:<67.8μW (photochemical limit),< 4.2mW (thermal limit). LED nominal wavelength:470nm(blue),635nm(red). A Class 1 product is safe under reasonably foreseeable conditions of operation as described by IEC 60825-1. However, it is recommended that you not direct the light (which is emitted from the bottom of the device)at anyone’s eyes. IMPORTANT BATTERY INFORMATION ● Keep bat…

Text truncated - open the document above for the full version.

光寶科技股份有限公司 LITE-ON TECHNOLOGY CORP. 16F, 392,Ruey Kuang Road, Neihu, Taipei 11492,Taiwan, R.O.C Tel:886-2-87982888 Fax:886-2-8793-6852 http://www.liteon.com Declaration of Authorization We Name: Lite-on Technology Corp. Address: 16F, 392, Ruey Kuang Road, Neihu, Taipei 11492, Taiwan City: Taipei Country: Taiwan Declare that: Name Representative of agent: Ms. Cathy Wang Agent Company name: BTL Inc. Address: B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan City: Taipei Country: Taiwan is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: Wireless Mouse Type designation: SM-2063 Trademark: HP on our behalf. 2014/12/29 Shirly Kuo / Engineer Lite-On Technology Corporation Tel: 886-2-8798-2888#3247 Fax: 886-2-8793-6852 [email protected] Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

9 FCC, Request for non-disclosure Date: 10-Aug-09 RF_501, Issue 5 Page 1 of 1 Company Name: Lite-on Technology Corp. Address: 16F, 392, Ruey Kuang Road, Neihu, Taipei 11492, Taiwan City: Taipei Country: Taiwan To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: H4IMS2063 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: 2014-12-2 Name and signature of applicant: Shirly Kuo Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Project No.: 1412040 Page 2 of 9 Project No.: 1412040 Page 3 of 9

1 2 3 4 1 2 3 A B C D E F A B C D E SCALE: UNIT: DRAWN: DESIGNER: CHECKED: APPROVED: PAGE: DRAWING NO.: TITLE: R SILITEK ELECTRONICS(DONGGUAN)CO.,LTD DONGGUAN LITE-ON COMPUTER CO., LTD. mm SPH-R&D-3001S-04B SHEETA4VER.:0.1 MARKISSUEDATEVER.DCN NO. 1:1 TOLERANCE UNSPECIFIED: .XXX 0.05 .XX 0.10 .X 0.15 . 0.25 ANGLE 0.5 1 of 1 836-01608-01A PART NODESCRIPTIONQ'TYMAT'LCOLORREMARK FCC Label Inside SM 2063 XXXXXXXXXXXXXX XXXXXX TA-XXXX/XXXX E145614 No. ESD-CPE xx-xxxxx xxxxx/SDPPI/2015 3876 ETA:XXXX/2015/WRLO C3 16.00 53.20 0.10 1. Printing Color Spec : Note : 2. Material : P.P Synthetic paper ( 3. This part must comply with the latest version "HS-301" of Liteon. 4. Stripping Resistance>=1.2kg@180° or >=3.5kg@90°. Label background color Black Label text, logo color White 0.1 0.1 001 201-XX 해당 무선설비는 운용 중 전파혼신 가능성이 있음

1 2 3 4 1 2 3 A B C D E F A B C D E SCALE: UNIT: DRAWN: DESIGNER: CHECKED: APPROVED: PAGE: DRAWING NO.: TITLE: R SILITEK ELECTRONICS(DONGGUAN)CO.,LTD DONGGUAN LITE-ON COMPUTER CO., LTD. mm SPH-R&D-3001S-04B SHEETA4VER.:0.1 MARKISSUEDATEVER.DCN NO. 1:1 TOLERANCE UNSPECIFIED: .XXX 0.05 .XX 0.10 .X 0.15 . 0.25 ANGLE 0.5 1 of 1 836-01608-01A PART NODESCRIPTIONQ'TYMAT'LCOLORREMARK FCC Label Outside SM 2063 FCC ID:H4IMS2063 CNC:C-XXXXX IC:4491A-MS2063 IFETEL ID:XXXXXXXX-XXXX HP, HQ-TRE, 71004 Boeblingen, Germany XXXX-XX-XXXX 1. Printing Color Spec : Note : 2. Material : Mylar 3. This part must comply with the latest version "HS-301" of Liteon . 4. Stripping Resistance>=1.2kg@180° or >=3.5kg@90°. 0.10 47.12± 26.56± With adhesive or glue Wireless Mouse() Model NO. Rating(/):3V 30mA Made in China( ) MSIP-CRI-HPK-SM-2063 CMIIT ID:XXXXXXXX Label background color Transparent Label text, logo color Pantone Cool Gray 7C 0.1 0.1 T3A002 E145614 (/) SM-2063

Project No.: 1412040 Page 4 of 9 Project No.: 1412040 Page 5 of 9 Project No.: 1412040 Page 6 of 9 Project No.: 1412040 Page 7 of 9 Project No.: 1412040 Page 8 of 9 Project No.: 1412040 Page 9 of 9

Report No. : : BTL-FICP-1 F This re Project Equipm Model N Applica Addres s Address Date of Date of Issued D Tested b Testing Techni c Authori z B TEL 1-1412040 FCC& port conce No. ent Name nt s For FCC s For IC Receipt Test Date by Enginee r cal Manage zed Signat BT B1, N Nei-Hu L:+886-2 &IC R FCC I IC:4 4 erns (check : 141204 0 : Wireles s : SM-206 3 : LITE-O N : 16F, 39 2 Taiwan, : 4F, 90, C 23585, T : Dec. 04 , : Dec. 04 , : Dec. 26 , : BTL Inc. er tory TL o.37, La u District 2-2657-32 adio D:H4IM 491A-M k one):O 0 s Mouse 3 N TECHNOL 2 , RueyKua R.O.C Chien 1 Rd. Taiwan , 2014 , 2014 ~ De , 2014 : : : L I ne 365, t, Taipei 299 FA Test MS206 MS206 Original Gra LOGY COR ang Road, N Chung-Ho ec. 23, 2014 (Ru (Jef (And IN Yang Gu City 114 AX: +886 Repo 63 3 antClass RP. Neihu, Taipe , New Taipe 4 sh Kao) ff Yang) dy Chiu) NC uang St., , Taiwan 6-2- 2657 P ort s II Change ei 11492, e i City,ROC . , . 7-3331 Page 1 of 52 2 Report No. : Decla r BTL rep that tes Laborat BTL's r to ensu mecha n drawn b BTL’s r agency This re p BTL-se approva BTL’s l a and acc Limitat For the tes t re p : BTL-FICP-1 ration presents to th st instrument tory (NML) o reports apply re that addit nical compon by the client reports must of the Gove port is the co elf, extracts f al. aboratory qu credited by th tion use of the a port is (are) in 1-1412040 he client that ts used has of R.O.C., or y only to the s tional produc nents. BTL s or others fro t not be use rnment. onfidential p from the test uality assuran he conformity uthority's log ncluded in th t testing is do been calibr National Inst specific sam ction units of shall have n m BTL issue ed by the cli roperty of th report shall nce procedur y assessmen go is limited u e conformity one in accord rated with th titute of Stan mples tested u f this model no liability fo ed reports. ient to claim he client. As not be repr o res are in co nt authorities unless the Te y assessmen dance with st he standards ndards and Te under condit are manufac or any declar m product en a mutual pr oduced excep mpliance wit s listed in this est Standard t authorities tandard proc s traceable t Technology (N tions. It is ma ctured with th rations, infer ndorsement b otection to th pt in full with th the ISO G s test report. (s)/Scope(s ) acceptance P cedures as a to National M NIST) of U.S anufacture’s he identical e rences or ge by the autho he clients, th h BTL’s autho uide17025 r )/Item(s) men respective. Page 2 of 52 pplicable and Measuremen .A. responsibili t electrical and eneralization orities or an he public and orized writte requirements ntioned in thi 2 d nt ty d s y d n s, s Report No. : 1 . CE 2 . SU 2.1 2.2 3 .GE 3.1 3.2 3.3 3.4 4 .EM 4.1 4.2 5 .BA 6 .AN 6.1 : BTL-FICP-1 ERTIFICAT UMMARY O 1 TEST FAC 2 MEASURE ENERAL IN 1 GENERAL 2 DESCRIP 3 BLOCKDIA 4 DESCRIP MC EMISSI 1 CONDUC 4.1.1 PO W 4.1.2 TEST 4.1.3 DEV 4.1.4 TES T 4.1.5 EUT 4.1.6 EUT 4.1.7 TES T 2 RADIATED 4.2.1 RAD 4.2.2 TES T 4.2.3 DEV 4.2.4 TES T 4.2.5 EUT 4.2.6 EUT 4.2.7 TES T 4.2.8 TEST 4.2.9 TEST NDWIDTH 5.1 TEST P 5.2 DEVIA 5.3 TEST S 5.4 EUT O 5.5 EUT T 5.6 TEST R TENNA CO 1 APPLIED 1-1412040 TION OF TEST R CILITY EMENT UN NFORMATI L DESCRIP PTION OF T AGRAMSH PTION OF S ON TEST TED EMISS WER LINE C TPROCEDU IATIONFRO TSETUP OPERATI N TEST CON T RESULTS D EMISSIO IATED EMI TPROCEDU IATIONFRO TSETUP OPERATI N TEST CON T RESULTS T RESULTS T RESULTS H TEST PROCEDU ATION FROM SETUP OPERATION EST COND RESULTS ONDUCTE PROCEDU Table of RESULTS NCERTAINT ION PTION OF E TEST MODE HOWINGTH SUPPORT U SION MEAS CONDUCTE URE OMTESTST NG CONDIT NDITIONS S ON MEASUR SSION LIM URE OMTESTST NG CONDIT NDITIONS S (9KHZ TO S (30MHZ T S(ABOVE10 RE M STANDA N CONDITIO DITIONS ED SPURIO URES / LIMI f Contents TY EUT ES HECONFIGU UNITS SUREMENT ED EMISSIO TANDARD TIONS REMENT MITS TANDARD TIONS O 30MHZ) TO 1000MH 000 MHZ) ARD ONS OUS EMIS IT URATIONO T ON HZ) SSION OFSYSTEMT P TESTED Page 3 of 52 Page 6 7 8 8 9 9 11 12 12 13 13 13 13 13 14 14 14 14 15 15 16 16 17 18 18 18 18 19 20 20 20 20 20 20 20 21 21 2 Report No. : 7 .ME 8 .EU ATTA ATTA ATTA ATTA ATTA ATTA : BTL-FICP-1 6.2 TEST P 6.3 DEVIA 6.4 TEST S 6.5EUT OP 6.6 EUT T 6.7 TEST R EASUREM T TEST PH CHMENT A CHMENTB CHMENT CHMENTD CHMENT CHMEN T 1-1412040 PROCEDU ATION FROM SETUP PERATION EST CON D RESULTS ENT INST HOTO A - CONDU B -RADIAT C -RADIAT D -RADIAT E - BANDW F - ANTEN Table of RE M STANDA CONDITIO DITIONS RUMENTS UCTED EM TED EMISS TED EMIS TED EMISS WIDTH NNA COND f Contents ARD ONS S LIST AN MISSION SION (9KH SSION (30M SION (ABO DUCTED S D SETTIN HZ TO 30M MHZ TO 10 OVE 1000M SPURIOUS G MHZ) 000MHZ) MHZ) S EMISSIO P ON Page 4 of 52 Page 21 21 21 22 22 22 23 24 27 28 30 33 46 49 2 Report No. : BTL : BTL-FICP-1 Issued No -FICP-1-14 1-1412040 o. 412040 REPOR RT ISSUED De Orig D HISTORY escription inal Issue. Y P Iss Dec Page 5 of 52 sued Date c. 26, 2014 2 Report No. : 1. CERT Equi p Brand Mode Applic Date Te s t S Stan d The abo standar d The test BTL-FI C has been standard : BTL-FICP-1 TIFICATION pment : d Name : el Name : cant : of Test : Sample : dard(s) : ve equipm e ds by BTL In data, data CP-1-141204 n accredited d and techn 1-1412040 N Wireless M HP SM-2063 LITE-ON T Dec. 04, 2 Engineerin FCC Part1 Canada R RSS-GEN ent has bee nc. evaluation, 40) were ob d by the Au ical standa r Mouse TECHNOLO 2014 ~ Dec. ng Sample 15, Subpart RSS-210:20 N Issue 4, N en tested an and equipm btained utiliz thority of TA rd(s). OGY CORP . 23, 2014 C: 2013(1 5 10 ovember 2 0 nd found com ment config zing the tes AF accordin P. 5.249)/ ANS 014 mpliance w guration con st procedure ng to the IS SI C63.4-20 with the requ ntained in ou es, test instr O-17025 qu P 009 uirement of t ur test repo ruments, te uality asses Page 6 of 52 the relative rt (Ref No. st sites tha t ssment 2 t Report No. : 2. SUMM Te s t p r oc FC 15 15 15 NOTE: (1) : BTL-FICP-1 MARY OF cedures acc FC StandardS CC .207 .209 .249 ”N/A” denot 1-1412040 TEST RES cording to t CC Part15, S Section IC RSS-GEN …

Text truncated - open the document above for the full version.