H4IMS9061Wireless Mouse

SM-9061 Wireless Mouse /SD-9081 USB Transceiver Product Guide Getting Started Thank you for choosing this 2.4G Wireless Mouse Kits. It operates with digital radio technology to ensure no hinder communication between the mouse and your computer without connecting cable. The transmission and receiving of mouse are free from angle restriction. Preparing mouse and Dongle Before working with your new mouse, look at the "Hardware Installation", and take a few one-time preparations. Hardware Installation ● Place the dongle at least 20 cm from other electrical devices (e.g. monitor) to achieve optimum performance. ● The distance between the mouse and dongle should not exceed 10 M. ● Do not place the dongle on metal surfaces. ● Do not move optical mouse on following surface - Glass or any transparent materialMirror or reflecting surface; Mouse pad with too many colors; Rough surface. Step 1: Connect the USB transceiver ● Plug the dongle connector into an USB port. ● SYSTEM will take around 10 sec to find your keyboard and mouse automatically. Step 2: Insert batteries Inserting batteries in mouse The mouse requires one alkaline AA battery. ● Open the battery compartment cover on the bottom of the mouse. ● First push the battery puller in then insert one AA battery into battery compartment. ● Fix the battery compartment cover on the bottom of mouse again. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Use and replace only with correct size and type (alkaline or zinc-carbon)of battery. Working mouse USB Transceiver and mouse electrical specification Iin addition to two buttons, the mouse also has a wheel that can be used as follows: ● As a 3rd button: press on the wheel. ● For scrolling, e.g. in documents or on Internet pages: turn the wheel forward or back. The Transceiver will have one main function: translate radio communications from the mouse to the PC via USB Full Speed USB Specification Compliance., meets Universal Serial Bus Specification version 2.0. Support USB Suspend Mode. Designation Value Modulation GFSK Operating Frequency 2403MHz~2480MHz channel 78 channel 2.4GHz ISM Band Storage temperature –20 °C ... +60 °C Operating temperature 0 °C ... +40 °C Mouse Battery type One alkaline battery, type AA Mouse Supply voltage 1.2~1.65V Mouse Current consumption max. 50 mA USB Transceiver Supply voltage DC 5.0 V ±5 % USB Transceiver Current consumption max..100 mA FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. This Class B device complies with part 15 of the FCC rules,Canadian ICES-003,RSS-210.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Laser and LED Specifications: Laser Mouse: This device complies with International Standard IEC 60825-1: (1993), +A1+A2(IEC 60825-1:2001-8) for a class1. Class 1 Laser Device Beam description: Collimated (parallel)beam of infrared light(invisible to the user) Laser power output:<716 microwatts(at 832 nanometers) to 834 microwatts(at 865 nanometers) Emitted laser wavelength:nominal:850 nanometers, range:(832-865 nanometers) A Class 1 laser product is safe under reasonably foreseeable conditions of operation as described by IEC 60825-1. However,it is recommended that you not direct the laser beam(which is emitted from the bottom of the device)at anyone’s eyes. Optical(LED) Mouse: This device complies with International Standard IEC 60825-1: (1993), +A1+A2(IEC 60825-1:2001-8) . This product uses LEDs that are consider Class1 (IEC 60825-1:1993+A1+A2) LED power output:<67.8W (photochemical limit),< 4.2mW (thermal limit). LED nominal wavelength:470nm(blue),635nm(red). A Class 1 product is safe under reasonably foreseeable conditions of operation as described by IEC 60825-1. However, it is recommended that you not direct the light (which is emitted from the bottom of the device)at anyone’s eyes. IMPORTANT BATTERY INFORMATION ● Keep batteries out of reach of children. ● Insert the batteries in the proper direction as indicated by the positive (+) and negative (-) markings in the battery compartment. ● Do not mix old and new batteries or batteries of different types (for example, carbon and alkaline batteries). ● Always remove old, weak, or worn-out batteries promptly and recycle or proper disposal of them in accordance with Local and National Disposal Regulations. ● If a battery leaks, remove all batteries and recycle or dispose of them in accordance with the battery manufacture's instructions and Local and National Disposal Regulations. Before inserting new batterie…

Text truncated - open the document above for the full version.

LITE-ON TECHNOLOGY CORP. 90, Chien 1 Road, Chung Ho, Taipei Hsien 235,Taiwan, R.O.C Tel:886-2-22226181 Fax:886-2-22231519 http://www.liteon.com Lite-on Technology Corp. June. 21, 2010 Federal Communications Commission Authorization and Evaluation Division FCC IDH4IMS9061 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1. Block Diagram 2. Circuit Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Name/Title: Shirly Kuo / Engineer Company Name: LITE-ON Technology Corp. Address: No.90, Chien 1Rd., Chun-Ho, Taipei Hsien235, Taiwan, R.O.C TEL: 2222-6181#6115 FAX: 2223-1519 Email: [email protected]

LITE-ON TECHNOLOGY CORP. 90, Chien 1 Road, Chung Ho, Taipei Hsien 235,Taiwan, R.O.C Tel:886-2-22226181 Fax:886-2-22231519 http://www.liteon.com Lite-on Technology Corp. June. 21, 2010 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Compliance Certification Services Inc. Address: No. 11, Wugong 6 th Rd., Wugu Towership, Taipei County 24891, Taiwan Mr. James Lee Job Title: Section Manager Email: [email protected] I am therefore responsible for the contents of the application. Brand Name and Model Name of the specified radio equipment: LITE -ON / FCC ID: H4IMS9061 Product Name: Wireless Mouse Signature____________________ Name/Title: Shirly Kuo / Engineer Company Name: LITE-ON Technology Corp. Address: No.90, Chien 1Rd., Chun-Ho, Taipei Hsien235, Taiwan, R.O.C TEL: 2222-6181#6115 FAX: 2223-1519 Email: [email protected]

Compliance Certification Services Inc. Report No.: T100602007 Date of Issue: June 14, 2010 A1 - 1 Total Page: 6 Rev. 00 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT

836-00818-01A NOTE: 1.MATERIAL P-SYNTHETI APER,THICKNESS:0.08mm. 2.Background and Serial number color:Black. 3.Text and Serial number background Color:White. 4.DAS IN O ACTORY SITRINTING. 5. PART NUMBER: 836-00818-01A. R 1.85 x 5 M/NSM -9061 CLASS 1 LED PRODUCT RATING1.5V50mA MADE IN CHINA S/N: FCC ID: H4IMS9061 P/N: 6.ROHS

Compliance Certification Services Inc. Report No.: T100602007 Date of Issue: June 14, 2010 A1 - 2 Rev. 00 INTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T100602007 Date of Issue: June 14, 2010 A1 - 3 Rev. 00 Compliance Certification Services Inc. Report No.: T100602007 Date of Issue: June 14, 2010 A1 - 4 Rev. 00 Compliance Certification Services Inc. Report No.: T100602007 Date of Issue: June 14, 2010 A1 - 5 Rev. 00 PCB Antenna Compliance Certification Services Inc. Report No.: T100602007 Date of Issue: June 14, 2010 A1 - 6 Rev. 00

Operational Description Getting Started Thank you for choosing this 2.4G Wireless Mouse Kits. It operates with digital radio technology to ensure no hinder communication between the mouse and your computer without connecting cable. The transmission and receiving of mouse are free from angle restriction. Preparing mouse and Dongle Before working with your new mouse, look at the "Hardware Installation", and take a few one-time preparations. Hardware Installation ● Place the dongle at least 20 cm from other electrical devices (e.g. monitor) to achieve optimum performance. ● The distance between the mouse and dongle should not exceed 10 M. ● Do not place the dongle on metal surfaces. ● Do not move optical mouse on following surface - Glass or any transparent materialMirror or reflecting surface; Mouse pad with too many colors; Rough surface. Step 1: Connect the USB transceiver ● Plug the dongle connector into an USB port. ● SYSTEM will take around 10 sec to find your keyboard and mouse automatically. Step 2: Insert batteries Inserting batteries in mouse The mouse requires one alkaline AA battery. ● Open the battery compartment cover on the bottom of the mouse. ● First push the battery puller in then insert one AA battery into battery compartment. ● Fix the battery compartment cover on the bottom of mouse again. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Use and replace only with correct size and type (alkaline or zinc-carbon)of battery. Working mouse USB Transceiver and mouse electrical specification Iin addition to two buttons, the mouse also has a wheel that can be used as follows: ● As a 3rd button: press on the wheel. ● For scrolling, e.g. in documents or on Internet pages: turn the wheel forward or back. The Transceiver will have one main function: translate radio communications from the mouse to the PC via USB Full Speed USB Specification Compliance., meets Universal Serial Bus Specification version 2.0. Support USB Suspend Mode. Designation Value Modulation GFSK Operating Frequency 2403MHz~2480MHz channel 78 channel 2.4GHz ISM Band Storage temperature –20 °C ... +60 °C Operating temperature 0 °C ... +40 °C Mouse Battery type One alkaline battery, type AA Mouse Supply voltage 1.2~1.65V Mouse Current consumption max. 50 mA USB Transceiver Supply voltage DC 5.0 V ±5 % USB Transceiver Current consumption max..100 mA

T100602007- CCS WUGU Antenna Pattern Application: LITE-ON Technology Corp. Model: SM-9061 Antenna Type: PCB Antenna Antenna Gain: -3.22 dBi Job No.:990611-MS-2403-E Date:2010/6/11 Time: 07:15 Temp.()/Hum.(%):25/80% Tested by: Mark.Y Center freq.(MHz): 2403 Polarization : E Plane Max gain(dBi):-3.22 Min gain(dBi):-38.82 Avg gain(dBi):-8.00 T100602007- CCS WUGU Antenna Pattern Job No.:990611-MS-2403-H Date:2010/6/11 Time: 07:16 Temp.()/Hum.(%):25/80% Tested by: Mark.Y Center freq.(MHz): 2403 Polarization : H Plane Max gain(dBi):-9.99 Min gain(dBi):-45.07 Avg gain(dBi):-13.87 T100602007- CCS WUGU Antenna Pattern Job No.:990611-MS-2441-E Date:2010/6/11 Time: 07:13 Temp.()/Hum.(%):25/80% Tested by: Mark.Y Center freq.(MHz): 2441 Polarization : E Plane Max gain(dBi):-3.57 Min gain(dBi):-39.71 Avg gain(dBi):-8.74 T100602007- CCS WUGU Antenna Pattern Job No.:990611-MS-2441-H Date:2010/6/11 Time: 07:12 Temp.()/Hum.(%):25/80% Tested by: Mark.Y Center freq.(MHz): 2441 Polarization : H Plane Max gain(dBi):-9.55 Min gain(dBi):-31.04 Avg gain(dBi):-14.07 T100602007- CCS WUGU Antenna Pattern Job No.:990611-MS-2480-E Date:2010/6/11 Time: 07:09 Temp.()/Hum.(%):25/80% Tested by: Mark.Y Center freq.(MHz): 2480 Polarization : E Plane Max gain(dBi):-4.14 Min gain(dBi):-36.40 Avg gain(dBi):-9.35 T100602007- CCS WUGU Antenna Pattern Job No.:990611-MS-2480-H Date:2010/6/11 Time: 07:10 Temp.()/Hum.(%):25/80% Tested by: Mark.Y Center freq.(MHz): 2480 Polarization : H Plane Max gain(dBi):-9.25 Min gain(dBi):-35.05 Avg gain(dBi):-14.81

Compliance Certification Services Inc. Report No.: T100602007-RP1 FCC ID: H4IMS9061 Date of Issue: June 14, 2010 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 Total Page: 28 Rev. 00 FCC 47 CFR PART 15 SUBPART C TEST REPORT For Wireless Mouse Model Number: SM-9061 Trade Name: LITE-ON Issued to LITE-ON Technology Corp. No.90, Chien 1Rd., Chun-Ho, Taipei Hsien235, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No. 11, Wu-Gong 6 th Rd., Wugu Industrial Park, Taipei Hsien 248, Taiwan (R.O.C.) http://www.ccsrf.com [email protected] Compliance Certification Services Inc. Report No.: T100602007-RP1 FCC ID: H4IMS9061 Date of Issue: June 14, 2010 Page 2 Rev. 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION........................................................................................................3 2. EUT DESCRIPTION..............................................................................................................................4 3. TEST METHODOLOGY.......................................................................................................................5 3.1 EUT CONFIGURATION........................................................................................................................5 3.2 EUT EXERCISE....................................................................................................................................5 3.3 GENERAL TEST PROCEDURES.............................................................................................................5 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS ........................................................6 3.5 DESCRIPTION OF TEST MODES...........................................................................................................6 4. INSTRUMENT CALIBRATION...........................................................................................................7 4.1 MEASURING INSTRUMENT CALIBRATION......................................................................................7 4.2 MEASUREMENT EQUIPMENT USED .........................................................................................7 4.3 MEASUREMENT UNCERTAINTY ...............................................................................................7 5. FACILITIES AND ACCREDITATIONS ..............................................................................................8 5.1 FACILITIES .........................................................................................................................................8 5.2 EQUIPMENT........................................................................................................................................8 5.3 TABLE OF ACCREDITATIONS AND LISTINGS.......................................................................................9 6. SETUP OF EQUIPMENT UNDER TEST...........................................................................................10 6.1 SETUP CONFIGURATION OF EUT.......................................................................................................10 6.2 SUPPORT EQUIPMENT ...............................................................................................................10 7. FCC PART 15.249 REQUIREMENTS................................................................................................11 7.1 20 DB BANDWIDTH.....................................................................................................................11 7.2 BAND EDGES MEASUREMENT ................................................................................................14 7.3 SPURIOUS EMISSION .................................................................................................................19 7.4 POWERLINE CONDUCTED EMISSIONS ..................................................................................27 APPENDIX I PHOTOGRAPHS OF TEST SETUP ...................................................................................28 APPENDIX 1 - PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T100602007-RP1 FCC ID: H4IMS9061 Date of Issue: June 14, 2010 Page 3 Rev. 00 1. TEST RESULT CERTIFICATION Applicant: LITE-ON Technology Corp. No.90, Chien 1Rd., Chun-Ho, Taipei Hsien235, Taiwan, R.O.C. Equipment Under Test: Wireless Mouse Trade Name: LITE-ON Model Number: SM-9061 Date of Test: June 7, 2010 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2003 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements emission limits of FCC Rules Part 15.207, 15.209 and 15.249. The test results of this report relate only to the tested sample identified in this report. Approved by: Reviewed by: Rex Lai Gina Lo Section Manager Section Manager Compliance Certification Services Inc. Compliance Certification Services Inc. Compliance Certification Services Inc. Report No.: T100602007-RP1 FCC ID: H4IMS9061 Date of Issue: June 14, 2010 Page 4 Rev. 00 2. EUT DESCRIPTION Product Wireless Mouse Trade Name LITE-ON Model Number SM-9061 Model Discrepancy N/A Power Supply Powered by AA batteries (DC: 1.5V) Frequency Range 2403 ~ 2480 MHz Frequency Spacing 1MHz Frequency Number 78 Channels Modulation Technique GFSK Antenna Gain -3.22 dBi Antenna Designation PCB Antenna Remark: 1. The sample selected for test was production product and was provided by manufacturer. 2. T…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Report No.: T100602007-RP1 FCC ID: H4IMS9061 Date of Issue: June 14, 2010 Page 28 Rev. 00 APPENDIX I PHOTOGRAPHS OF TEST SETUP RADIATED EMISSION SET UP PHOTOS