H8N-RTW030V1Broadband Wireless Router

Broadband Wireless Router User Manual AV HOME Bridge User Manual 2 Note No part of this publication may be reproduced in any form by any means without the prior written permission. Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies. 2002/06/18, V1.1-030 Safety Instructions Installing l Use only the type of power source indicated on the marking labels. l Use only the power adapter supplied with the product. l Do not overload wall outlet or extension cords as this may increase the risk of electric shock or file, If the power cord is frayed, replace it with a new one. l Proper ventilation is necessary to prevent the product overheating. Do not block or cover the slots and openings on the device, which are intended for ventilation and proper operation. It is recommended to mount the product with a stack. l Do not place the product near any source of heat or expose it to direct sunshine. l Do not expose the product to moisture. Never spill any liquid on the product. l Do not attempt to connect with any computer accessory or electronic product without instructions from qualified service personnel. This may result in risk of electronic shock or file. l Do not place this product on an unstable stand or table. Using l Power off and unplug this product from the wall outlet when it is not in use or before cleaning. Pay attention to the temperature of the power adapter. The temperature might be high. l After powering off the product, power on the product at least 15 seconds later. l Do not block the ventilating openings of this product. l When the product is expected to be not in use for a period of time, unplug the power cord of the product to prevent it from the damage of storm or sudden increases in rating. Servicing Do not attempt to disassemble or open covers of this unit yourself. Nor should you attempt to service the product yourself, which may void the user’s authority to operate it. Please call vendor under the following conditions: l If the power cord or plug is damaged or frayed. l If liquid has been spilled into the product. l If the product has been exposed to rain or water. l If the product does not operate normally when the operating instructions are followed. l If the product has been dropped or the cabinet has been damaged. l If the product exhibits a distinct change in performance AV HOME Bridge User Manual 3 Warning l This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between computer mounted antenna and person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation. l This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution l Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. . 4 Contents WHAT YOU CAN DO...........................................................................................................................7 FEATURES..............................................................................................................................................7 Router Feature..................................................................................................................................7 Bridging Features.............................................................................................................................8 Wireless LAN Features....................................................................................................................8 SYSTEM REQUIREMENTS.......................................................................................................................8 For Wireless Clients.........................................................................................................................8 For Ethernet (wired) Clients.............................................................................................................8 UNPACKING YOUR BROADBAND WIRELESS ROUTER (AP)...................................................................9 INDICATORS AND CONNECTING.................................................................................................11 FRONT PANEL.......................................................................................................................................11 REAR PANEL.........................................................................................................................................11 CONNECTING THE BROADBAND WIRELESS ROUTER (AP)...................................................................12 1 Connecting to the WAN port......................................................................................................12 2 Connecting to the LAN port L1/L2/L3/L4.................................................................................12 3 Preparing your wireless station...................................................................................................12 4 Connecting the power adapter....................................................................................................12 BASIC CONFIGURATION................................................................................................................13 ON ETHERNET CLIENT........................................................................................................................13 ON WIRELESS CLIENT.........................................................................................................................13 XDSL/ATU-R CONNECTION..................................................................................................…

Text truncated - open the document above for the full version.

SDRAM 4Mx16x2 Kendin KS8995E 10/100B Switch Flash 1Mx16 Realtek RTL8019AS PCMCIA WireLAN CPU Nitrogen 210-80 Transformer RJ45 x4 RJ45 Transformer LAN Port x 4WAN Port Console Power Regulator 12V 1A 1.8V 2.5V 3.3V 5V RTW030/RTW030(11CH/13CH/14CH) FUNCTION BLOCK

Report No.: 026H022FI Page : 1 of 14 Version:1.0 Attachment 2 : EUT Detailed Photographs (1) EUT Photo—Mode 1 (2) EUT Photo—Mode 1 Report No.: 026H022FI Page : 8 of 14 Version:1.0 (15) EUT Photo—Mode 2 (16) EUT Photo—Mode 2

ASKEY COMPUTER CORP. FCC ID.: H8N-RTW030V1 10F, NO.119, CHIENKANG RD., CHUNG-HO, TAIPEI, TAIWAN, R.O.C.. Tel: 886 2 2228-7588 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Broadband Wireless Router ASKEY Model No.: RTW030 TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE S/N: Made in Taiwan Broadband Wireless Router Model No.: RTW030 F F C C C C I I D D : : H H 8 8 N N - - R R T T W W 0 0 3 3 0 0 V V 1 1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

ASKEY COMPUTER CORP. FCC ID.: H8N-RTW030V1 10F, NO.119, CHIENKANG RD., CHUNG-HO, TAIPEI, TAIWAN, R.O.C.. Tel: 886 2 2228-7588 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Broadband Wireless Router ASKEY Model No.: RTW030 TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE S/N: Made in Taiwan Broadband Wireless Router Model No.: RTW030 F F C C C C I I D D : : H H 8 8 N N - - R R T T W W 0 0 3 3 0 0 V V 1 1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

Report No.: 026H022FI Page : 1 of 14 Version:1.0 Attachment 2 : EUT Detailed Photographs (1) EUT Photo—Mode 1 (2) EUT Photo—Mode 1 Report No.: 026H022FI Page : 2 of 14 Version:1.0 (3) EUT Photo—Mode 1 (4) EUT Photo—Mode 1 Report No.: 026H022FI Page : 3 of 14 Version:1.0 (5) EUT Photo—Mode 1 (6) EUT Photo—Mode 1 Report No.: 026H022FI Page : 4 of 14 Version:1.0 (7) EUT Photo—Mode 1 (8) EUT Photo—Mode 1 Report No.: 026H022FI Page : 5 of 14 Version:1.0 (9) EUT Photo—Mode 1 (10) EUT Photo—Mode 1 Report No.: 026H022FI Page : 6 of 14 Version:1.0 (11) EUT Photo—Mode 1 (12) EUT Photo—Mode 1 Report No.: 026H022FI Page : 7 of 14 Version:1.0 (13) EUT Photo—Mode 1 (14) EUT Photo—Mode 1 Report No.: 026H022FI Page : 8 of 14 Version:1.0 (15) EUT Photo—Mode 2 (16) EUT Photo—Mode 2 Report No.: 026H022FI Page : 9 of 14 Version:1.0 (17) EUT Photo—Mode 2 (18) EUT Photo—Mode 2 Report No.: 026H022FI Page : 10 of 14 Version:1.0 (19) EUT Photo—Mode 2 (20) EUT Photo—Mode 2 Report No.: 026H022FI Page : 11 of 14 Version:1.0 (21) EUT Photo—Mode 2 (22) EUT Photo—Mode 2 Report No.: 026H022FI Page : 12 of 14 Version:1.0 (23) EUT Photo—Mode 2 (24) EUT Photo—Mode 2 Report No.: 026H022FI Page : 13 of 14 Version:1.0 (25) EUT Photo—Mode 2 (26) EUT Photo—Mode 2 Report No.: 026H022FI Page : 14 of 14 Version:1.0 (27) EUT Photo—Mode 2 (28) EUT Photo—Mode 2


    
                    !! "   #  $%&'($&'(  ))(     *      )         &)    +                ,


-.   /01  ,  +                              2    3456$ '*  '  ' 7$'''8                   93: -;   
* &  7
&8  ,              +-.     

55 44 33 22 11 D D C C B B A A HELIUM 2x0 DECOUPLING ( 0603 PACKAGES ) RESET JUMPER PLL[2:1:0] CORE CLOCK---------------------- X 0 0 40MHz X 0 1 48MHz X 1 0 60MHz 1 0 0 80MHz WILL BE ZERO IN NORMAL OPERATION Reset Logic JTAG NOTE 1a Nitroge n210-80 1.1 RTW030(11CH/13CH/14CH) ASKEY COMPUTER CORP. 29 Tuesday, June 11, 2002 TitleSize Document Number Rev Date: Sheet of PD7PD15PD5PD10 PA3PA2PA0PA7PA5PA6PA4PA1 PD14PD13PD11PD12PD8PD9PD3PD0PD4PD1PD2PD6 PLL0 PLL1 GPIO[0..27] GPIO9 GPIO22 GPIO1 GPIO14 GPIO2 GPIO15 GPIO4GPIO24GPIO11GPIO17GPIO25GPIO27GPIO8 GPIO12GPIO16 GPIO3GPIO18 GPIO19 GPIO26 GPIO23GPIO7 GPIO5GPIO0 GPIO20GPIO6 GPIO10 GPIO13GPIO21 3V3_USB 3V3_PHY 25MHz DQ12DQ31MA6MA11DQ8DQ13DQ11MA1DQ28DQ27DQ18DQ10MA3DQ30DQ20DQ7DQ26DQ23DQ19DQ16MA13DQ4DQ2DQ14DQ5MA4DQ3DQ15MA5MA7MA8MA9DQ0DQ6MA2DQ29DQ21DQ9MA0DQ24DQ22DQ17MA12DQ25DQ1MA10 MRXD0 MCRS MRXD2MTXD0MTXD3MRXDV PLL2 MTXEN MRXERMRXD1MRXD3MTXD1MTXD2 MCOL MIICLK 3V3 3V3 3V3 1V8 3V3 3V3 3V3 1V8 1V8 VCC5V 3V3 C2000.1uF C490.1uF C480.1uF C470.1uF C500.1uF HELIUM 200 - POWER Helium21 0-80 U5H U12 D6 D12 D16 F4 H17 L4 M17 U7 U10 D8 D13 F17 H4 U8 U14 U11 D5 D10 D14 D15 D17 E4 E17 G4 J17 K4 M4 U6 U9 U13 P4 P17 U15 T4 T17 U16 U17 N4 N17 R4 R17 J9 J10 J11 J12 K9 K10 K11 K12 L9 L10 L11 L12 M9 M10 M11 M12 PLL_AVDD1 IO_DVDD1 IO_DVDD2 IO_DVDD3 IO_DVDD4 IO_DVDD5 IO_DVDD6 IO_DVDD7 IO_DVDD8 IO_DVDD9 CORE_DVDD1 CORE_DVDD2 CORE_DVDD3 CORE_DVDD4 CORE_DVDD5 CORE_DVDD6 PLL_AGND1 DGND1 DGND2 DGND3 DGND4 DGND5 DGND6 DGND7 DGND8 DGND9 DGND10 IDGND11 DGND12 DGND13 DGND14 CORE_DVDD7 CORE_DVDD8 IO_DVDD10 IO_DVDD11 IO_DVDD12 DGND15 DGND16 DGND17 DGND18 DGND19 DGND20 DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND C34 10uF/16V C46 10uF/16V C45 10uF/16V C44 10uF/16V USBHDLC CLOCKS HELIUM 200 - UCH U5D Helium210-80 H2H3 V10 W10 Y13 W13 V13V12 D20D19D18B17A17B19C19 W12 Y12 RESETINRESETOUTXTALMXTALPCCLKPLL1PLL0TESTEN0 USBEN USBM USBP HRXCLK HRXD HTXCLK HTXD TESTEN1TEST_SEL C37 10uF/16V C36 10uF/16V C35 10uF/16V + C42 100uF/25V R4910K 390R51 C43 10uF/16V X2 25MHz + C39 100uF/25V R45 22 C23 39pF R44 22 + C26 100uF/25V C24 12pF + C29100uF/25V R40 0 R60 10K <NA> + C27 100uF/25V + C28 100uF/25V C510.1uF R61 12K4 C38 100nF L6 200mA FB HELIUM 200 - EPB U5B Helium210-80 W1Y1V1V2T3T1W2U1U2 T2 R1R2R3 P1P2P3 N1N2N3 M1M2M3 L1L2L3 K1K2K3 J1J2J3J4 H1 PCS0PCS1PCS2PCS3PCLK PWAIT PSTROBE0PSTROBE1PSTROBE2 PD0PD1PD2PD3PD4PD5PD6PD7PA8(PD8)PA9(PD9)PA10(PD10)PA11(PD11)PA12(PD12)PA13(PD13)PA14(PD14)PA15(PD15)PA0PA1PA2PA3PA4PA5PA6PA7 HELIUM 200 - GPIO PCMCIAADSL U5G Helium210-80 B20C20A4B4C6C5 E1E2 G2G3F1F2 A20A18A19B18A16 F3E3 D1D2D3D4C1 C2C3A3C4G1 GPIO0GPIO1GPIO2GPIO3GPIO4GPIO5 GPIO6/UARTTXGPIO7/UARTRX GPIO8/PA16/BDO GPIO9/PA17/BDI GPIO10/PA18/BCLK GPIO11/PA19 GPIO12/TXCLKENGPIO13/RXCLKENGPIO14/8KHZGPIO15/TXBYTEGPIO16/RXBYTE GPIO17/PA20 GPIO18PA21 GPIO19/nCE0GPIO20/nCE1GPIO21/nOEGPIO22/nIOIS16GPIO23/nWE GPIO24GPIO25GPIO26GPIO27 BCS HELIUM 200 SDRAM U5A Helium21 0-80 W18 Y18 W16W15 V14 Y14 W14 Y15 V15 Y16 W17 V17V16 Y17 U20 V20 Y20 U18 T20 V18 Y19 W19 V19 U19 W20 L20 M19 N18N20R18 P20 T18T19 R20R19 P19P18 N19 M20M18 L19 G18G20 H18 J19J20 K18K20 L18L17 K19K17 J18 H20H19 G19G17 MA13MA12MA0MA1MA2MA3MA4MA5MA6MA7MA8MA9MA10MA11SCLKCLKEWECS1CS0DQM0DQM1DQM2DQM3CASRASDQ0DQ1DQ2DQ3DQ4DQ5DQ6DQ7DQ8DQ9DQ10DQ11DQ12DQ13DQ14DQ15DQ16DQ17DQ18DQ19DQ20DQ21DQ22DQ23DQ24DQ25DQ26DQ27DQ28DQ29DQ30DQ31 R52 22 LK1 NA R480 R410NAR470 TP18 C25 10UF/16V R420NA + C41100uF/25V TP1 + C40100uF/25V U6ADM708 23 146 758 VCCGND MR_NPFIWDI RESET_N PFO_N WDO_N FB2BEAD1206/0.5A TP25TP2TP26 TP3TP4 R46 0 R43 1M C530.1uF C520.1uF C540.1uF FB1BEAD1206/0.5A C300.1uF C330.1uF C320.1uF C310.1uF HELIUM 200 -ETHERNET ETH PHY ETHERNET MEDIA INDEPENDENT INTERFACE U5E Helium21 0-80 U3U5U4V3V4W3Y2V5Y4W4Y3V7W5Y5V6Y6W6W7V9V8W8Y7 Y8 W9 Y9 Y11 W11 V11 Y10 REXT XRDM XRDP XDTBXDTA MII_TXCLK MII_TXEN MII_TXD0MII_TXD1MII_TXD2MII_TXD3 MII_RXCLK MII_RXER MII_RXD3MII_RXD2MII_RXD1MII_RXD0 MII_RXDV MII_CRS MII_COL MII_MDC MII_MD PHY_TEST0PHY_TEST1PHY_TEST2PHY_TEST3PHY_TEST4PHY_TEST5PHYCLK HELIUM 200 - DEBUG JTAG ICE U5FHelium210-80 B1A2B2B3A1 F18 E18E19E20 F20F19 JTAG_TDI JTAG_TDO JTAG_TCLK JTAG_TMS JTAG_TRST ICE_TDIICE_TDOICE_TCLKICE_TMSICE_TRSTICE_SEL C2010.1uF R500 NA TP5 TP27 TP7TP6 J5 HEADER14 1 24 5 6 7 8 9 10 3 1214 1311 R5710K R5610K R5510K R5310K R54 10K C188 10pF C187 10pF TP24 R58 0 R59 0 NA ALE 6 PCS0# 3 BCS 3 RESET_OUT# 6,8 USBP 7 USBEN 7 PD[0..15] 3,5,6 PA[0..7] 3 GPIO[0..27] 3,5,6,7,8 RD# 3,5,6 WR# 3,5,6 PWAIT# 5,6 PCS3# 5 RAS# 4 DQ[0..31] 4 DQM1# 4 DQM3# 4 CAS# 4 DQM0# 4 MA[0..13] 4 SCLK 4 CLKE# 4 CS0# 4 DQM2# 4 WE# 4 MIICLK 8 MRXD[0..3] 8MTXD[0..3] 8 MTXEN 8 MRXDV 8 MCOL 8 USBM 7 55 44 33 22 11 D D C C B B A A 2MB : AM29LV160DB BOOT EEPROM FLASH ROM 1.1 RTW030(11C H/13CH/14CH) ASKEY COMPUTER CORP. 39 Tuesday, June 11, 2002 TitleSize Document Number Rev Date: Sheet of LA_PA[0..15] PD1PD9 LA_PA14 PD0PD5 LA_PA7LA_PA11LA_PA4LA_PA3LA_PA15LA_PA2 PD4PD13 LA_PA8 PD11 PD[0..15] LA_PA1 BCS PD2 LA_PA6LA_PA12LA_PA10LA_PA9LA_PA5 PD6PD7PD8PD14 LA_PA13 PD15PD12 WR#PCS0# PD3PD10 RD# GPIO[0..27] GPIO9GPIO10GPIO8 PA4 PA6PA1PA2PA5PA0PA4PA3 3V3 3V3 3V3 3V3 TP11 R115 0NA TP13 R164 0 R165 0 NA TP19TP9TP8TP23 C128 0.1uF C129 0.1uF U18 X25128 6173 25 84 SCKCSHOLDWP SO SI VCCVSS 48 TSOP AMD 1M*16 AMD/INTEL U17 FLASH 1Mx16b 123456789 10 111213 141516171819202122242325 26 27 282930313233343536 37 3839404142434445 46 4748 A15A14A13A12A11A10A9A8A19/A21/A20 WE# RESET# NC3 NC4RY_BY#/A19A18A17A7A6A5A4A3A1A2A0 CE# Vss27 OE# DQ0DQ8DQ1DQ9DQ2 DQ10 DQ3 DQ11 VCC DQ4 DQ12 DQ5 DQ13 DQ6 DQ14 DQ7 DQ15/A-1 Vss46 BYTE#A16 + C127 10UF BCS 2 RD# 2,5,6 LA_PA[0..15] 5,6 PA7 2 PA[0..7] 2 GPIO4 2 GPIO[0..27] 2,5,6,7,8 WR# 2,5,6 PD[0..15] 2,5,6 GPIO13 2 GPIO1 2 PCS0# 2 GPIO18 2 PA6 2 55 44 33 22 11 D D C C B B A A SDRAM 4Mx16x2 1.1 RTW030(11C H/13CH/14CH) ASKEY COMPUTER CORP. 49 Tuesday, June 11, 2002 TitleSize Document Number Rev Date: Sheet of DQM0#MA6MA10MA11DQM1#MA7CAS#MA3MA8MA13 MA[0..13] MA4MA2MA12MA1MA5MA9MA0WE#RAS#CS0#CLKE#SCLK DQM2#MA6MA10MA11DQM3#MA7CAS#MA3MA8MA13…

Text truncated - open the document above for the full version.

Report No. 026H022FI Page: 1 of 57 Version:1.0 Test Report Product Name : Broadband Wireless Router Model No.: RTW030 FCC ID.: H8N-RTW030V1 Applicant : ASKEY COMPUTER CORP. Address : 10F, NO.119, CHIENKANG RD., CHUNG-HO, TAIPEI, TAIWAN, R.O.C. Date of Receipt : June 4, 2002 Date of Test : June 28, 2002 Report No. : 026H022FI The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 026H022FI Page: 3 of 57 Version:1.0 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .....................................................................................................5 1.1. EUT Description............................................................................................................................5 1.2. Operational Description ................................................................................................................6 1.3. Tested System Datails....................................................................................................................7 1.4. Configuration of tested System .....................................................................................................8 1.5. EUT Exercise Software .................................................................................................................8 1.6. Test Facility ...................................................................................................................................9 2. Conducted Emission..................................................................................................................10 2.1. Test Equipment............................................................................................................................10 2.2. Test Setup ....................................................................................................................................10 2.3. Limits ..........................................................................................................................................10 2.4. Test Procedure .............................................................................................................................11 2.5. Test Result of Conducted Emission.............................................................................................12 3. Peak Power Output ...................................................................................................................14 3.1. Test Equipment............................................................................................................................14 3.2. Test Setup ....................................................................................................................................14 3.3. Limits ..........................................................................................................................................14 3.4. Test Result of Peak Power Output...............................................................................................15 4. RF Exposure Evaluation ...........................................................................................................16 4.1. Fries Formula ..............................................................................................................................16 4.2. EUT Operation condition ............................................................................................................16 4.3. Test Result of RF Exposure Evaluation.......................................................................................17 5. Radiated Emission .....................................................................................................................18 5.1. Test Equipment............................................................................................................................18 5.2. Test Setup ....................................................................................................................................18 5.3. Limits ..........................................................................................................................................19 5.4. Test Procedure .............................................................................................................................20 5.5. Test Result of Radiated Emission................................................................................................21 6. Band Edge ..................................................................................................................................39 6.1. Test Equipment............................................................................................................................39 6.2. Test Setup ....................................................................................................................................39 6.3. Limits ..........................................................................................................................................40 6.4. Test Procedure .............................................................................................................................40 6.5. Test Result of Band Edge ............................................................................................................41 7. Occupied Bandwidth .................................................................................................................45 7.1. Test Equipment............................................................................................................................45 7.2. Test Setup ................................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 026H022FI Page : 1 of 5 Version:1.0 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test (Mode 1) Back View of Conducted Test (Mode 1) Report No.: 026H022FI Page : 2 of 5 Version:1.0 Front View of Conducted Test (Mode 2) Back View of Conducted Test (Mode 2) Report No.: 026H022FI Page : 3 of 5 Version:1.0 Front View of Radiated Test (Mode 1) Back View of Radiated Test (Mode 1) Report No.: 026H022FI Page : 4 of 5 Version:1.0 Front View of Radiated Test (Mode 2) Back View of Radiated Test (Mode 2) Report No.: 026H022FI Page : 5 of 5 Version:1.0 Front View of Radiated Test (Horn)