H8N-TC7300Cable Modem

Page 1 / 25 Cable Modem TC7300.d1TI This symbol on the product ensures that the device complies with European legislation, Directive 89/336/EEC, 73/23/EEC, 93/68/EEC, which covers the EMC (electromagnetic compatibility), and safety aspects of marking. This symbol means that your inoperative electronic appliance must be collected separately and not mixed with the household waste. The European Union has implemented a specific collection and recycling system for which producers' are responsible. This appliance has been designed and manufactured with high quality materials and components that can be recycled and reused. Electrical and electronic appliances are liable to contain parts that are necessary in order for the system to work properly but which can become a health and environmental hazard if they are not handled or disposed of in the proper way. Consequently, please do not throw out your inoperative appliance with the household waste. If you are the owner of the appliance, you must deposit it at the appropriate local collection point or leave it with the vendor when buying a new appliance. - If you are a professional user, please follow your supplier's instructions. - If the appliance is rented to you or left in your care, please contact your service provider. Help us protect the environment in which we live! CAUTION Disconnect power before servicing . This device is intended for indoor operation only. Telephone jacks Line 1 and Line 2 must not be connected to outside wiring. CAUTION To ensure reliable operation and to prevent overheating, provide adequate ventilation for this modem and keep it away from heat sources. Do not locate near heat registers or other heat-producing equipment. Provide for free air flow around the Wireless Voice Gateway and its power supply. Page 2 / 25 NORTH AMERICAN CABLE INSTALLER: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. Operating Information Operating Temperature: 0 ̊ - 40 ̊ C (32 ̊ - 104 ̊ F) Storage Temperature: -20 ̊ to 70 ̊ C (-4 ̊ – 157 ̊ F) If you purchased this product at a retail outlet, please read the following: Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. The numbers are located on the back of the product. Model No. ____________________________Serial No ________________________________ Purchase Date: ________________________Dealer/Address/Phone: _________________________ Page 3 / 25 Safety Recommendations REMEMBER SAFETY FIRST Using equipment safely Your Cable Modem has been manufactured to meet safety standards, but you must take care if you want it to perform properly and safely. It is important that you read this booklet completely, especially the safety instructions below. If you have any doubts about the installation, operation or safety of decoder, please contact your supplier. To avoid the risk of electric shock • Disconnect the Cable Modem from the mains supply before you connect the Cable Modem to (or disconnect it from) any other equipment. Remember that contact with 110 Volt AC mains can be lethal or cause severe electric shock. • Never remove the Cable Modem’s cover. Should the Cable Modem fail, contact the Customer Service to arrange repair or service. • Never allow anyone to push anything into holes, slots or any other opening in the case • Do not block the Cable Modem’s ventilation slots; never stand it on soft furnishings or carpets • Do not put anything on the Cable Modem which might spill or drip into it (eg. Lighted candles or containers of liquids). Do not expose the Cable Modem to dripping or splashing. If an object or liquid enters inside the Cable Modem, unplug it immediately and contact the Customer Service. • Do not store the Cable Modem in excessively hot, cold or damp conditions. The Cable Modem is intended to operate at an ambient temperature of less than 40 degrees Celsius and a maximum humidity level of 75%. In case of a storm, it is recommended that you unplug the Cable Modem from the mains and from the TV set. • Leave the mains socket accessible so that you can unplug the set quickly Connecting to the mains supply • This Cable Modem is designed to operate at 110 ~ 240 VAC. • If you are in any doubt about the mains lead, the plug or connection, please consult the Customer Service. • Only the power adapter supplied with the decoder has to be used Ensuring optimum performance • Leave 7cm to 10cm around the Cable Modem to ensure that proper ventilation gets to the Cable Modem. • Do not store your Cable Modem on its side (if not allowed) • To clean the Cable Modem, use a dry, clean soft cloth with no cleaning solvent or abrasive products. Clean the ventilation openings regularly. Page 4 / 25 MAIN TECHNICALSPECIFICATIONS General Operating voltage 110 ~ 240 VAC Typical Power consumption 18W max Dimensions (W x H x D) 220mm x 166.7mm x 43mm Operating temperature range 0 – 40 °C Storage temperature range -20 – 70 °C AC adapter (or plug-in adapter) type ADAPTER 18W 12VDC/1.5A Connections DC input 12V/ 1.5A Cable input 1xCoaxial cable connector Phone plugs 2xRJ11 Ethernet plugs 4xRJ-45 This symbol on your set guarantees that your product complies with the European Directives 1999/5/ECand 2009/125/EC on Safety, Telecom, Electromagnetic Compatibility and Energy related Products. Page 5 / 25 Chapter 1: Connections and Setup .............................................................................................. 6 Turning on the Wireless Gateway .............................................................................................. 6 Introduction ...............…

Text truncated - open the document above for the full version.

Page 1 / 27 Cable Modem TC7300.TI This symbol on the product ensures that the device complies with European legislation, Directive 89/336/EEC, 73/23/EEC, 93/68/EEC, which covers the EMC (electromagnetic compatibility), and safety aspects of marking. This symbol means that your inoperative electronic appliance must be collected separately and not mixed with the household waste. The European Union has implemented a specific collection and recycling system for which producers' are responsible. This appliance has been designed and manufactured with high quality materials and components that can be recycled and reused. Electrical and electronic appliances are liable to contain parts that are necessary in order for the system to work properly but which can become a health and environmental hazard if they are not handled or disposed of in the proper way. Consequently, please do not throw out your inoperative appliance with the household waste. If you are the owner of the appliance, you must deposit it at the appropriate local collection point or leave it with the vendor when buying a new appliance. - If you are a professional user, please follow your supplier's instructions. - If the appliance is rented to you or left in your care, please contact your service provider. Help us protect the environment in which we live! CAUTION Disconnect power before servicing . This device is intended for indoor operation only. Telephone jacks Line 1 and Line 2 must not be connected to outside wiring. CAUTION To ensure reliable operation and to prevent overheating, provide adequate ventilation for this modem and keep it away from heat sources. Do not locate near heat registers or other heat-producing equipment. Provide for free air flow around the Wireless Voice Gateway and its power supply. Page 2 / 27 NORTH AMERICAN CABLE INSTALLER: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. Operating Information Operating Temperature: 0 ̊ - 40 ̊ C (32 ̊ - 104 ̊ F) Storage Temperature: -20 ̊ to 70 ̊ C (-4 ̊ – 157 ̊ F) If you purchased this product at a retail outlet, please read the following: Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. The numbers are located on the back of the product. Model No. ____________________________Serial No ________________________________ Purchase Date: ________________________Dealer/Address/Phone: _________________________ Page 3 / 27 Safety Recommendations REMEMBER SAFETY FIRST Using equipment safely Your Cable Modem has been manufactured to meet safety standards, but you must take care if you want it to perform properly and safely. It is important that you read this booklet completely, especially the safety instructions below. If you have any doubts about the installation, operation or safety of decoder, please contact your supplier. To avoid the risk of electric shock • Disconnect the Cable Modem from the mains supply before you connect the Cable Modem to (or disconnect it from) any other equipment. Remember that contact with 110 Volt AC mains can be lethal or cause severe electric shock. • Never remove the Cable Modem’s cover. Should the Cable Modem fail, contact the Customer Service to arrange repair or service. • Never allow anyone to push anything into holes, slots or any other opening in the case • Do not block the Cable Modem’s ventilation slots; never stand it on soft furnishings or carpets • Do not put anything on the Cable Modem which might spill or drip into it (eg. Lighted candles or containers of liquids). Do not expose the Cable Modem to dripping or splashing. If an object or liquid enters inside the Cable Modem, unplug it immediately and contact the Customer Service. • Do not store the Cable Modem in excessively hot, cold or damp conditions. The Cable Modem is intended to operate at an ambient temperature of less than 40 degrees Celsius and a maximum humidity level of 75%. In case of a storm, it is recommended that you unplug the Cable Modem from the mains and from the TV set. • Leave the mains socket accessible so that you can unplug the set quickly Connecting to the mains supply • This Cable Modem is designed to operate at 110 ~ 240 VAC. • If you are in any doubt about the mains lead, the plug or connection, please consult the Customer Service. • Only the power adapter supplied with the decoder has to be used Ensuring optimum performance • Leave 7cm to 10cm around the Cable Modem to ensure that proper ventilation gets to the Cable Modem. • Do not store your Cable Modem on its side (if not allowed) • To clean the Cable Modem, use a dry, clean soft cloth with no cleaning solvent or abrasive products. Clean the ventilation openings regularly. Page 4 / 27 MAIN TECHNICALSPECIFICATIONS General Operating voltage 110 ~ 240 VAC Typical Power consumption 18W max Dimensions (W x H x D) 220mm x 166.7mm x 43mm Operating temperature range 0 – 40 °C Storage temperature range -20 – 70 °C AC adapter (or plug-in adapter) type ADAPTER 18W 12VDC/1.5A Connections DC input 12V/ 1.5A Cable input 1xCoaxial cable connector Phone plugs 2xRJ11 Ethernet plugs 4xRJ-45 This symbol on your set guarantees that your product complies with the European Directives 1999/5/ECand 2009/125/EC on Safety, Telecom, Electromagnetic Compatibility and Energy related Products. Chapter 1: Connections and Setup .............................................................................................. 6 Turning on the Wireless Voice Gateway ..................................................................................... 6 Page 5 / 27 Introduction ....................…

Text truncated - open the document above for the full version.

ASKEY COMPUTER CORP. 10F, NO.119, JIANKANG RD., ZHONGHE DIST., NEW TAIPEI CITY 23585, TAIWAN, R.O.C. Declaration for no non-US channel operation 2015/4/29 We, ASKEY COMPUTER CORP. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: H8N-TC7300 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- John Chiou Director ASKEY COMPUTER CORP. TEL: + 886 (2) 2228-7588 #18726 E-mail : [email protected]

ASKEY COMPUTER CORP. 10F, NO.119, JIANKANG RD., ZHONGHE DIST., NEW TAIPEI CITY 23585, TAIWAN, R.O.C. Date:2015/4/29 FCC ID:H8N-TC7300 A U T H O R I Z A T I O N L E T T E R To whom it may concern: We, the undersigned, hereby authorize Amanda Wu/Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu/Senior Specialist of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------- John Chiou Director ASKEY COMPUTER CORP. TEL: + 886 (2) 2228-7588 #18726 E-mail : [email protected]

ASKEY COMPUTER CORP. 10F, NO.119, JIANKANG RD., ZHONGHE DIST., NEW TAIPEI CITY 23585, TAIWAN, R.O.C. Date:2015/4/29 FCC ID: H8N-TC7300 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- John Chiou Director ASKEY COMPUTER CORP. TEL: + 886 (2) 2228-7588 #18726 E-mail : [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Model: TC7300.TI Page 12 Model: TC7300XXXXXX Page 23 Adapter: MU18-D120150-A1 Page 24 Page 25 Adapter: SYS1428-1812-W2 Page 26

FCC ID：H8N-TC7300 LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label Here

FCC ID：H8N-TC7300 LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label Here

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22

Report No.: SA150422E04 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA150422E04 FCC ID: H8N-TC7300 Test Model: TC7300.TI Series Model: TC7300XXXXXX (“X” can be 0-9; A-Z; a-z; -; . or blank for marketing), TC7300.d1TI, TC7300XXXXXX (“X” can be 0-9; A-Z; a-z; -; . or blank for marketing) Received Date: Apr. 22, 2015 Test Date: Apr. 29 to May 13, 2015 Issued Date: June 23, 2015 Applicant: ASKEY COMPUTER CORP. Address: 10F, NO.119, JIANKANG RD., ZHONGHE DIST., NEW TAIPEI CITY 23585, TAIWAN, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA150422E04 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power ........................................................................... 6 Report No.: SA150422E04 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA150422E04 Original release. June 23, 2015 Report No.: SA150422E04 Page No. 5 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA150422E04 Page No. 6 / 6 Report Format Version: 6.1.1 3 Calculation Result of Maximum Conducted Power Frequency Band (MHz) Max Power (mW) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 2412-2462 680.002 5.01 20 0.428 1 NOTE: Directional gain = 2dBi + 10log(2) = 5.01dBi --- END ---

Report No.: RF150422E04 Page No. 1 / 59 Report Format Version: 6.1.1 FCC Test Report Report No.: RF150422E04 FCC ID: H8N-TC7300 Test Model: TC7300.TI Series Model: TC7300XXXXXX (“X” can be 0-9; A-Z; a-z; -; . or blank for marketing), TC7300.d1TI, TC7300XXXXXX (“X” can be 0-9; A-Z; a-z; -; . or blank for marketing) Received Date: Apr. 22, 2015 Test Date: Apr. 27 to May 13, 2015 Issued Date: June 23, 2015 Applicant: ASKEY COMPUTER CORP. Address: 10F, NO.119, JIANKANG RD., ZHONGHE DIST., NEW TAIPEI CITY 23585, TAIWAN, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150422E04 Page No. 2 / 59 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 14 3.5 General Description of Applied Standards ........................................................................................ 15 4 Test Types and Results ...................................................................................................................... 16 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 16 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 16 4.1.2 Test Instruments ................................................................................................................................ 17 4.1.3 Test Procedures ................................................................................................................................. 19 4.1.4 Deviation from Test Standard ............................................................................................................ 19 4.1.5 Test Set Up ........................................................................................................................................ 20 4.1.6 EUT Operating Conditions ................................................................................................................. 21 4.1.7 Test Results ....................................................................................................................................... 22 4.2 Conducted Emission Measurement .................................................................................................. 35 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 35 4.2.2 Test Instruments ..............…

Text truncated - open the document above for the full version.