H8N-WHD-A1Wireless Hard Disk Drive

User Manual Wireless Hard Drive W H D - A 1 v 1 . 1 ii Copyright © 2013 ASUSTeK Computers, Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computers Inc (“ASUS”). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. COPYRIGHT INFORMATION iii SAFETY INFORMATION In order to maintain compliance with the FCC RF exposure guidelines, this equipment should be installed and operated with minimum distance [20cm] between the radiator and your body. Use only with supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. CAUTION! Any changes or modifications not expressly approved in this manual could void your authorization to use this device. WIRELESS DUO DEVICE CARE - Please fully charge your Wireless Duo until the power indicator goes out before first use. - Do not attempt to open your Wireless Duo device casing. There are no user serviceable parts inside and you might damage sensitive electronic circuits and components. Unauthorized disassembly will void the warranty. - Do not leave your Wireless Duo device exposed to strong sunlight or excessive heat for a prolonged period. This may damage it. - Do not handle your Wireless Duo device with wet hands or expose it to moisture or liquids of any kind. Continuous changes from a cold to a warm environment may lead to condensation inside your Wireless Duo device, resulting in corrosion and possible damage. - If you pack your Wireless Duo device in your suitcase during travel, beware of damage. Cramming a suitcase may crack the device. Remember to switch off your wireless connections during air travel. - Use your Wireless Duo device in an environment with ambient temperatures between5°C and 35°C. THE BATTERY Your Wireless Duo is equipped with a high performance non-detachable Li-ion battery. Observe the maintenance guidelines for a longer battery life. - Avoid charging in extremely high or low temperature. - Do not try to remove or replace the battery. - Do not use any cell or battery which is not designed for use with Wireless Duo. - Never try to open the battery as it contains substances that might be harmful if swallowed or allowed to come into contact with unprotected skin. - Do not remove and short-circuit the battery, as it may overheat and cause a fire. Keep it away from metal objects. - Do not remove and dispose of the battery (or Wireless Duo) in fire. It could explode and release harmful substances into the environment. - Do not remove and dispose of the battery (or Wireless Duo) with your regular household waste. Take it to a hazardous material collection point. - In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. CAUTION! Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions THE CHARGER - Do not use any charger other than that specifically provided for use with Wireless Duo. - Do not leave a battery on prolonged charge when not in use. - Never pull the charger cord to release it from the mains – pull the charger itself. iv FEDERAL COMMUNICATIONS COMMISSION STATEMENT This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions: - This device may not cause harmful interference, and - This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the…

Text truncated - open the document above for the full version.

ASKEY Computer Corporation 10F, No.119, ChienKang RD., Chung-Ho, Taipei, Taiwan, 235, R.O.C. TEL No: +886 2 22287588 FAX No: +886 2 32349340 Attestation for FCC Declaration of Conformity FCC ID: H8N-WHD-A1 Data: Nov. 06, 2013 Please be notified that we, the undersigned, ASKEY Computer Corporation declares that the product which bears the above FCC ID is also compliant with the FCC requirements for DoC. The test report number supporting the DoC is 13A0066R-ITUSP01V02 Testing in regards to this report was done by QuieTek Corporation, located at 2F, No.345, Xinhu 2nd Rd., Neihu District,, Taipei Taiwan, which has been accredited in accordance to all of the requirements of 47CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely, ------------------------------------------------------------ John Chiou / Director ASKEY Computer Corporation Tel: +886 2 22287588 Fax: +886 2 32349340 Email: [email protected]

ASKEY Computer Corporation 10F, No.119, ChienKang RD., Chung-Ho, Taipei, Taiwan, 235, R.O.C. TEL No: +886 2 22287588 FAX No.: +886 2 32349340 About WiFi Channels 12 & 13 Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID: H8N-WHD-A1 This device is client that can't operate on Channels 12 and 13, when a master transmits on these channels. This information when programmed into the EEPROM will not be accessible and can not be changed by the end user. Signature ------------------------------------------------- John Chiou / Director ASKEY Computer Corporation Tel: +886 2 22287588 Fax: +886 2 32349340 Email: [email protected]

ASKEY Computer Corporation FCC ID.: H8N-WHD-A1 10F, No.119, ChienKang RD., Chung-Ho, Taipei, Taiwan, 235, R.O.C. Tel : +886 2 22287588 Federal Communications Commission Nov. 06 , 2013 Authorization and Evaluation Division ATTESTATION FCC ID: H8N-WHD-A1 Product: Wireless Hard Disk Drive Model No. : MAN02 We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely,

ASKEY Computer Corporation FCC ID.: H8N-WHD-A1 10F, No.119, ChienKang RD., Chung-Ho, Taipei, Taiwan, 235, R.O.C. Tel : +886 2 22287588 ASKEY Computer Corporation 10F, No.119, ChienKang RD., Chung-Ho, Taipei, Taiwan, 235, R.O.C. Tel : +886 2 22287588 Fax: +886 2 32349340 Federal Communications Commission Nov. 06 , 2013 Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: Schematics: (WHD-A1) Schem Block Diagram: (WHD-A1) BlkDia Operational Description: (WHD-A1) OPDes The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, -------------------------------------------------------- John Chiou / Director ASKEY Computer Corporation

RF_160, Issue 02 ASKEY Computer Corporation Declaration of Authorization We Name: ASKEY Computer Corporation Address: 10F, No.119, ChienKang RD., Chung-Ho, Taipei, Taiwan, 235, R.O.C. City: Taipei . Country: Taiwan, R.O.C. . Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: Wireless Hard Disk Drive FCC ID: H8N-WHD-A1 Trademark: ASUS on our behalf. Date: 2013/11/06.. City:  Taipei .. Name:  John Chiou .. (2) Function: Director Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Report No：13A0066R-HPUSP09V01 Page: 4 of 13 EUT Photographs Report No：13A0066R-HPUSP09V01 Page: 5 of 13

ASKEY Computer Corporation FCC ID.: H8N-WHD-A1 10F, No.119, ChienKang RD., Chung-Ho, Taipei, Taiwan, 235, R.O.C. Tel : +886 2 22287588 FCC ID Label

ASKEY Computer Corporation FCC ID.: H8N-WHD-A1 10F, No.119, ChienKang RD., Chung-Ho, Taipei, Taiwan, 235, R.O.C. Tel : +886 2 22287588 The FCC ID Label will be placed on the equipment as shown in the photograph below.

Report No.: 13A0066R-RFUSP42V01 Page : 4 of 14 (7) EUT Photo (8) EUT Photo Report No.: 13A0066R-RFUSP42V01 Page : 5 of 14 (9) EUT Photo (10) EUT Photo Antenna Report No.: 13A0066R-RFUSP42V01 Page : 6 of 14 (11) EUT Photo (12) EUT Photo Report No.: 13A0066R-RFUSP42V01 Page : 7 of 14 (13) EUT Photo (14) EUT Photo Report No.: 13A0066R-RFUSP42V01 Page : 8 of 14 (15) EUT Photo (16) EUT Photo Report No.: 13A0066R-RFUSP42V01 Page : 9 of 14 (17) EUT Photo (18) EUT Photo WLAN Module Report No.: 13A0066R-RFUSP42V01 Page : 10 of 14 (19) EUT Photo (20) EUT Photo Report No.: 13A0066R-RFUSP42V01 Page : 11 of 14 (21) EUT Photo (22) EUT Photo Report No.: 13A0066R-RFUSP42V01 Page : 12 of 14 (23) EUT Photo (24) EUT Photo Report No.: 13A0066R-RFUSP42V01 Page : 13 of 14 (25) EUT Photo (26) EUT Photo Report No.: 13A0066R-RFUSP42V01 Page : 14 of 14 (27) EUT Photo (28) EUT Photo

Report No：13A0066R-HPUSP09V01 Page: 1 of 23 FCC SAR Test Report Product Name：Wireless Hard Disk Drive Model No. ： WHD-A1 Applicant ： ASKEY Computer Corporation Address ： 10F, No.119, ChienKang RD., Chung-Ho, Taipei, Taiwan, 235, R.O.C. Date of Receipt ：2013/09/30 Issued Date ：2013/10/22 Report No. ：13A0066R-HPUSP09V01 Report Version ：V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of Quie Tek Corporation. Report No：13A0066R-HPUSP09V01 Page: 2 of 23 Test Report Certification Issued Date: 2013/10/22 Report No.: 13A0066R-HPUSP09V01 Product Name ： Wireless Hard Disk Drive Applicant ： ASKEY Computer Corporation Address ： 10F, No.119, ChienKang RD., Chung-Ho, Taipei, Taiwan, 235, R.O.C. Manufacturer ： ASKEY TECHNOLOGY (JIANG SU) LTD. Model No. ： WHD-A1 Trade Name ： ASUS FCC ID ： H8N-WHD-A1 Applicable Standard ： FCC Oet65 Supplement C June 2001 IEEE Std. 1528-2003 47CFR § 2.1093 Measurement procedures ： KDB 447498 , KDB 248227, KDB 616217,KDB 865664 Test Result ： Max. SAR Measurement (1g) 0.475 W/kg Application Type ： Certification The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of Quie Tek Corporation. Documented By ： (Adm. Specialist / April Chen) Tested By ： (Engineer / Wen Lee) Approved By ： (Manager / Vincent Lin) Report No：13A0066R-HPUSP09V01 Page: 3 of 23 TABLE OF CONTENTS Description Page 1. General Information.............................................................................. 5 1.1 EUT Description ............................................................................................................5 1.2 Antenna List ................................................................................................................... 5 1.3 Maximum output power and tolerance allowed for production units ............................ 5 1.4 Test Environment ...........................................................................................................6 2. SAR Measurement System .................................................................. 7 2.1 DASY5 System Description .......................................................................................... 7 2.1.1 Applications ................................................................................................................ 8 2.1.2 Area Scans................................................................................................................... 8 2.1.3 Zoom Scan (Cube Scan Averaging)............................................................................ 8 2.1.4 Uncertainty of Inter-/Extrapolation and Averaging .................................................... 8 2.2 DASY5 E-Field Probe ................................................................................................... 9 2.2.1 Isotropic E-Field Probe Specification ......................................................................... 9 2.3 Boundary Detection Unit and Probe Mounting Device ............................................... 10 2.4 DATA Acquisition Electronics (DAE) and Measurement Server ............................... 10 2.5 Robot ............................................................................................................................ 11 2.6 Light Beam Unit........................................................................................................... 11 2.7 Device Holder ..............................................................................................................12 2.8 SAM Twin Phantom .................................................................................................... 12 3. Tissue Simulating Liquid ................................................................... 13 3.1 The composition of the tissue simulating liquid .......................................................... 13 3.2 Tissue Calibration Result ............................................................................................. 13 3.3 Tissue Dielectric Parameters for Head and Body Phantoms ....................................... 14 4. SAR Measurement Procedure ........................................................... 15 4.1 SAR System Check ...................................................................................................... 15 4.1.1 Dipoles ...................................................................................................................... 15 4.1.2 System Check Result ................................................................................................ 15 4.2 SAR Measurement Procedure ...................................................................................... 16 5. SAR Exposure Limits ......................................................................... 17 6. Test Equipment List............................................................................ 18 7. Measurement Uncertainty .................................................................. 19 8. Conducted Power Measurement ....................................................... 20 9. Test Results......................................................................................... 21 9.1 SAR Test Results Summary ......................................................................................... 21 Appendix ............................................................................................................................ 22 Report No：13A0066R-HPUSP09V01 Page: 4 of 23 Appendix A. SAR System Check Data Appendix B. SAR measurement Data Appendix C. Test Setup Photographs & EUT Photographs Appendix D. Probe Calibration Data Appendix E. Dipole Calibration Data Report No：13A0066R-HPUSP09V01 Page: 5 of 23 1. General Information 1.1 EUT Description Product Name Wireless Hard Disk Drive Trade Name ASUS Model No. WHD-A1 FCC ID H8N-WHD-A1 TX Frequency 241…

Text truncated - open the document above for the full version.

Report No.: 13A0066R-RFUSP42V01 Page : 1 of 78 FCC Test Report Product Name Wireless Hard Disk Drive Model No WHD-A1 FCC ID. H8N-WHD-A1 Applicant ASKEY Computer Corporation Address 10F, No.119, ChienKang RD., Chung-Ho, Taipei, Taiwan, 235, R.O.C. Date of Receipt Sep. 30, 2013 Issue Date Oct. 28, 2013 Report No. 13A0066R-RFUSP42V01 Report Version V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by TAF any agency of the U.S. Government Report No.: 13A0066R-RFUSP42V01 Page : 2 of 78 Test Report Certification Issue Date: Oct. 28, 2013 Report No.: 13A0066R-RFUSP42V01 Product Name Wireless Hard Disk Drive Applicant ASKEY Computer Corporation Address 10F, No.119, ChienKang RD., Chung-Ho, Taipei, Taiwan, 235, R.O.C. Manufacturer ASKEY TECHNOLOGY (JIANG SU) LTD. Model No. WHD-A1 FCC ID. H8N-WHD-A1 EUT Rated Voltage AC 100-240V, 50/60Hz EUT Test Voltage AC 120V/60Hz Trade Name ASUS Applicable Standard FCC CFR Title 47 Part 15 Subpart C: 2012 ANSI C63.4: 2003, ANSI C63.10: 2009, KDB 558074 Test Result Complied The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by TAF any agency of the U.S. Government Documented By : ( Senior Adm. Specialist / Rita Huang ) Tested By : ( Engineer / Nowal Kuo) Approved By : ( Manager / Vincent Lin ) Report No.: 13A0066R-RFUSP42V01 Page : 3 of 78 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .....................................................................................................5 1.1. EUT Description............................................................................................................................5 1.2. Operational Description ................................................................................................................7 1.3. Tested System Details....................................................................................................................8 1.4. Configuration of Tested System ....................................................................................................8 1.5. EUT Exercise Software .................................................................................................................8 1.6. Test Facility ...................................................................................................................................9 2. Conducted Emission..................................................................................................................10 2.1. Test Equipment............................................................................................................................10 2.2. Test Setup ....................................................................................................................................10 2.3. Limits ..........................................................................................................................................11 2.4. Test Procedure .............................................................................................................................11 2.5. Uncertainty ..................................................................................................................................11 2.6. Test Result of Conducted Emission.............................................................................................12 3. Peak Power Output ...................................................................................................................14 3.1. Test Equipment............................................................................................................................14 3.2. Test Setup ....................................................................................................................................14 3.3. Limits ..........................................................................................................................................14 3.4. Test Procedure .............................................................................................................................14 3.5. Uncertainty ..................................................................................................................................14 3.6. Test Result of Peak Power Output...............................................................................................15 4. Radiated Emission .....................................................................................................................18 4.1. Test Equipment............................................................................................................................18 4.2. Test Setup ....................................................................................................................................19 4.3. Limits ..........................................................................................................................................20 4.4. Test Procedure .............................................................................................................................21 4.5. Uncertainty ..................................................................................................................................21 4.6. Test Result of Radiated Emission................................................................................................22 5. RF antenna conducted test........................................................................................................34 5.1. Test Equipment............................................................................................................................34…

Text truncated - open the document above for the full version.

Report No.: 13A0066R-RFUSP42V01 Page : 1 of 3 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 13A0066R-RFUSP42V01 Page : 2 of 3 Front View of Radiated Test Back View of Radiated Test Report No.: 13A0066R-RFUSP42V01 Page : 3 of 3 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn)

Report No：13A0066R-HPUSP09V01 Page: 1 of 13 Appendix C. Test Setup Photographs & EUT Photographs Test Setup Photographs EUT Back EUT Front Touch Touch Report No：13A0066R-HPUSP09V01 Page: 2 of 13 EUT Side EUT Bottom Touch Touch Report No：13A0066R-HPUSP09V01 Page: 3 of 13 Depth of the liquid in the phantom-Zoom In Note: The positions used in the measurements were according to IEEE 1528-2003.