H8N-WLL6240802.11 b/g/n Min PCI Card

• 1 WLL6240(RoHS) H8N-WL6240 AR5BMB97 MPCI Module User's Guide Revision November 2011 Atheros Communications, Inc. • 2 COMPANY CONFIDENTIAL November 2011 • 2 © 2000–2007 by Atheros Communications, Inc. All rights reserved. Atheros ® , Atheros Driven ® , Atheros XR ® , Driving the Wireless Future ® , ROCm ® , Super AG ® , Super G ® , Total 802.11n ® , and Wake on Wireless ® are registered by Atheros Communications, Inc. Atheros SST™, Signal-Sustain Technology™, the Air is Cleaner at 5-GHz™, XSPAN™, Wireless Future. Unleashed Now.™, and 5-UP™ are trademarks of Atheros Communications, Inc. The Atheros logo is a registered trademark of Atheros Communications, Inc. All other trademarks are the property of their respective holders. Subject to change without notice. Notice The information in this document has been carefully reviewed and is believed to be accurate. Nonetheless, this document is subject to change without notice, and Atheros Communications, Inc. (Atheros) assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a person or organization of any updates. Atheros reserves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Atheros does not represent that products described herein are free from patent infringement or from any other third party right. No part of this document may be reproduced, adapted or transmitted in any form or by any means, electronic or mechanical, for any purpose, except as expressly set forth in a written agreement signed by Atheros. Atheros or its affiliates may have patents or pending patent applications, trademarks, copyrights, maskwork rights or other intellectual property rights that apply to the ideas, material and information expressed herein. No license to such rights is provided except as expressly set forth in a written agreement signed by Atheros. ATHEROS MAKES NO WARRANTIES OF ANY KIND WITH REGARD TO THE CONTENT OF THIS DOCUMENT. IN NO EVENT SHALL ATHEROS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL SPECULATORY OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBLITY OF SUCH DAMAGES. IN PARTICULAR, ATHEROS SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA TRANSMITTED OR OTHERWISE USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE OR DATA. ATHEROS SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE AS THEY MIGHT OTHERWISE APPLY TO THIS DOCUMENT AND TO THE IDEAS, MATERIAL AND INFORMATION EXPRESSED HEREIN. WARNING: Warnings call special attention to hazards that can cause system damage, data corruption, personal injury, or death. Atheros Communications, Inc. • 3 COMPANY CONFIDENTIAL November 2011 • 3 Contents Notice ..........................................................................................................................2 Contents .............................................................................................................................. 3 Introduction......................................................................................................................... 4 AP Network Attachment and Configuration....................................................................... 5 AP Initial Configuration ................................................................................................. 6 Web Browser .............................................................................................................. 6 AP Web Server ...................................................................................................................9 Accessing the AP Web Server ........................................................................................ 9 Configuration Windows................................................................................................ 11 Working with Configuration Windows .................................................................... 12 2.4 GHz Radio Configuration Window ........................................................................ 13 Regulatory Compliance Information ................................................................................ 14 U.S. Regulatory Wireless Notice.................................................................................. 15 Atheros Communications, Inc. • 4 COMPANY CONFIDENTIAL November 2011 • 4 Introduction The Atheros AR5BMB82 MPCI module implements an IEEE 802.11b/g/n wireless LAN (WLAN) AP with DFS Master function. MIMO operation is implemented using three transmit and three receive chains per the 802.11n standard. This module may be installed in PC and host processor systems using approved external antennas. The module may be configured for 2.4 GHz operation using the Web Server function. Refer to Appendix A. Atheros Communications, Inc. • 5 COMPANY CONFIDENTIAL November 2011 • 5 2 AP Network Attachment and Configuration This section provides procedures for connecting and configuring the AP. Configuration can be performed either from a web browser accessing the built-in web server, or by entering commands using the command line interface (CLI). For detailed information on using the web server, refer to “AP Web Server” in Appendix A. For detailed information on using CLI, refer to “AP Command-Line Interface” in Appendix B. For “Factory Default Settings” refer to Appendix B. Atheros Communications, Inc. • 6 COMPANY CONFIDENTIAL November 2011 AP Initial Configuration Configure the AP for its Service Set Identifier (SSID) unique to the application. This configuration can be done either through a web browser with access to the built-in AP web server, or by issuing commands through…

Text truncated - open the document above for the full version.

ASKEY COMPUTER CORP. 10F,NO.119, CHIENKANG RD.,CHUNG-HO,TAIPEI TAIWAN R.O.C. Declaration for no non-US channel operation We, ASKEY COMPUTER CORP. declare that the device does not support any non-US channels in all the operational mode(s) for the following product. FCC ID: H8N-WLL6240 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- John Chiou / Director ASKEY COMPUTER CORP.

ASKEY COMPUTER CORP. 10F,NO.119, CHIENKANG RD.,CHUNG-HO,TAIPEI TAIWAN R.O.C. Date: 2011-11-10 FCC ID: H8N-WLL6240 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ___________________________________ John Chiou / Director ASKEY COMPUTER CORP.

FCC ID: H8N-WLL6240 Report No.: RF110916C21 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch December 6, 2011 Dear Application Examiner, ASKEY COMPUTER CORP, It’s an 802.11 b/g/n Min PCI Card, FCC ID: H8N-WLL6240, would like to have your authorization as a modular approval. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip AR9227. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is MMBT2907A. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via test tool. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: H8N-WLL6240 Report No.: RF110916C21 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, signature Gary Chang Technical Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

ASKEY COMPUTER CORP. 10F,NO.119, CHIENKANG RD.,CHUNG-HO,TAIPEI TAIWAN R.O.C. Date: 2011-11-10 A U T H O R I Z A T I O N L E T T E R To whom it may concern: We, the undersigned ASKEY COMPUTER CORP. hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC Part 15C and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------ John Chiou / Director ASKEY COMPUTER CORP.

Page 1 CONSTRUCTION PHOTOS OF EUT

Page 2 Page 3 Page 4

FCC ID: H8N-WLL6240 Report No.: RF110916C21 Operational Description This device is an 802.11 b/g/n Min PCI Card, which operates in the 2.4GHz band; the maximum data rate could be up to 300Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 300Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by the 3.3Vdc from host equipment. The device is used Dipole with R-SMA antenna connector. The other instruction, please have a look at the users manual.

Report No.: SA110916C21 Report Format Version 4.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA110916C21 MODEL NO.: WLL6240(RoHS) FCC ID: H8N-WLL6240 RECEIVED: Sep. 19, 2011 TESTED: Oct. 12 ~ Oct. 20, 2011 ISSUED: Nov. 22, 2011 APPLICANT: ASKEY COMPUTER CORP. ADDRESS: 10F, NO.119, CHIENKANG RD.,CHUNG-HO,TAIPEI TAIWAN R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 5 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval, or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA110916C21 Report Format Version 4.0.0 2 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................. 4 2. RF EXPOSURE............................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)......................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................... 5 2.3 CLASSIFICATION ........................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER.................................. 5 Report No.: SA110916C21 Report Format Version 4.0.0 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release NA Nov. 22, 2011 Report No.: SA110916C21 Report Format Version 4.0.0 4 1. CERTIFICATION PRODUCT:802.11 b/g/n Min PCI Card MODEL:WLL6240(RoHS) BRAND:ASKEY Computer Corp. APPLICANT:ASKEY COMPUTER CORP. TESTED:Oct. 12 ~ Oct. 20, 2011 TEST SAMPLE:ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: WLL6240(RoHS)) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Nov. 22, 2011 Ivonne Wu / Senior Specialist APPROVED BY : , DATE :Nov. 22, 2011 Gary Chang / Technical Manager Report No.: SA110916C21 Report Format Version 4.0.0 5 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER MODULATION MODE MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 802.11g 24.4 5 20 0.173 1

Report No.: RF110916C21 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO.: RF110916C21 MODEL NO.: WLL6240(RoHS) FCC ID: H8N-WLL6240 RECEIVED: Sep. 19, 2011 TESTED: Oct. 12 ~ Oct. 20, 2011 ISSUED: Oct. 26, 2011 APPLICANT: ASKEY COMPUTER CORP. ADDRESS: 10F, NO.119, CHIENKANG RD.,CHUNG-HO,TAIPEI TAIWAN R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 68 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF110916C21 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD...............................................................................................4 1. CERTIFICATION............................................................................................................5 2. SUMMARY OF TEST RESULTS ...................................................................................6 2.1 MEASUREMENT UNCERTAINTY.................................................................................6 3. GENERAL INFORMATION ............................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ..............................................................................7 3.2 DESCRIPTION OF TEST MODES ................................................................................8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ...........................................................8 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................9 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................. 11 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................ 11 4. TEST TYPES AND RESULTS .....................................................................................12 4.1 RADIATED EMISSION MEASUREMENT ...................................................................12 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT.................................................12 4.1.2 TEST INSTRUMENTS.................................................................................................13 4.1.3 TEST PROCEDURES .................................................................................................14 4.1.4 DEVIATION FROM TEST STANDARD........................................................................14 4.1.5 TEST SETUP...............................................................................................................15 4.1.6 EUT OPERATING CONDITIONS ................................................................................15 4.1.7 TEST RESULTS ..........................................................................................................16 4.2 CONDUCTED EMISSION MEASUREMENT ..............................................................29 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................................29 4.2.2 TEST INSTRUMENTS.................................................................................................29 4.2.3 TEST PROCEDURES .................................................................................................30 4.2.4 DEVIATION FROM TEST STANDARD........................................................................30 4.2.5 TEST SETUP...............................................................................................................31 4.2.6 EUT OPERATING CONDITIONS ................................................................................31 4.2.7 TEST RESULTS ..........................................................................................................32 4.3 6dB BANDWIDTH MEASUREMENT...........................................................................34 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ........................................................34 4.3.2 TEST INSTRUMENTS.................................................................................................34 4.3.3 TEST PROCEDURE....................................................................................................34 4.3.4 DEVIATION FROM TEST STANDARD........................................................................34 4.3.5 TEST SETUP...............................................................................................................35 4.3.6 EUT OPERATING CONDITIONS ................................................................................35 4.3.7 TEST RESULTS ..........................................................................................................36 Report No.: RF110916C21 3 Report Format Version 4.0.0 4.4 MAXIMUM OUTPUT POWER .....................................................................................40 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT......................................40 4.4.2 INSTRUMENTS ...........................................................................................................40 4.4.3 TEST PROCEDURES .................................................................................................40 4.4.4 DEVIATION FROM TEST STANDARD........................................................................41 4.4.5 TEST SETUP...............................................................................................................41 4.4.6 EUT OPERATING CONDITIONS ..........................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 3 RADIATED EMISSION TEST 4