H8NTN502A1TurboFon E4/Handheld Device

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 2020-11-10 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _Askey Computer Corp__ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: H8NTN502A1 Product Description: TurboFon E4, Handheld Device Model: TN502A1, TN502A1(WOS), access, access(WOS) Sincerely, ----------------------------------- John Chiou /Director Tel: 886 2 2228-7588 Fax: 886 2 3234-9340 E-mail: [email protected]

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 6.0 2020-11-10 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: H8NTN502A1 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - Block Diagram - Schematics - Operational Description - Software Operational Description - Tune up Procedure - Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ----------------------------------- John Chiou /Director Tel: 886 2 2228-7588 Fax: 886 2 3234-9340 E-mail: [email protected]

Date: 2020-11-18 FCC ID: H8NTN502A1 To the attention of Federal Communications Commission Authorization and Evaluation Division Declaration letter for label requirement The label is permanent affixed in the battery compartment, and the EUT will be selling to market without the battery installed. The users can see the label during the battery installation process. The battery cover can be opened without any special tools. Sincerely yours, ----------------------------------- John Chiou /Director Tel: 886 2 2228-7588 Fax: 886 2 3234-9340 E-mail: [email protected]

Date: 2020-11-25 FCC ID: H8NTN502A1 AUTHORIZATION LETTER To Whom It May Concern: Askey Computer Corp hereby authorizes Andrea Hsia, Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia, Supervisor of BV CPS Taoyuan on Askey Computer Corp’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------- John Chiou /Director Tel: 886 2 2228-7588 Fax: 886 2 3234-9340 E-mail: [email protected]

Reference No.: 200615C06-1 Page No. 1 / 10 CONSTRUCTION PHOTOS OF EUT Reference No.: 200615C06-1 Page No. 2 / 10 Reference No.: 200615C06-1 Page No. 3 / 10 Reference No.: 200615C06-1 Page No. 4 / 10 Reference No.: 200615C06-1 Page No. 5 / 10 Reference No.: 200615C06-1 Page No. 6 / 10 Reference No.: 200615C06-1 Page No. 7 / 10 Docking Station (optional) Reference No.: 200615C06-1 Page No. 8 / 10 Reference No.: 200615C06-1 Page No. 9 / 10 Adapter (For docking use) Reference No.: 200615C06-1 Page No. 10 / 10

Label sample Label location

Reference No.: 200615C06-2 Page No. 1 / 12 CONSTRUCTION PHOTOS OF EUT LTE AUX ANT. Wifi/BT/GPS ANT. LTE Main ANT. Reference No.: 200615C06-2 Page No. 2 / 12 Reference No.: 200615C06-2 Page No. 3 / 12 Reference No.: 200615C06-2 Page No. 4 / 12 Reference No.: 200615C06-2 Page No. 5 / 12 Reference No.: 200615C06-2 Page No. 6 / 12 Reference No.: 200615C06-2 Page No. 7 / 12 Reference No.: 200615C06-2 Page No. 8 / 12 Reference No.: 200615C06-2 Page No. 9 / 12 Reference No.: 200615C06-2 Page No. 10 / 12 Reference No.: 200615C06-2 Page No. 11 / 12 Reference No.: 200615C06-2 Page No. 12 / 12

SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 58 Report No. : SF200615C06 Issued Date : Oct. 15, 2020 SAR Test Report Report No. : SF200615C06 Applicant : ASKEY COMPUTER CORP. Address : 10F, NO.119, JIANKANG RD., ZHONGHE DIST., NEW TAIPEI CITY 23585, TAIWAN, R.O.C. Product : TurboFon E4 / Handheld Device FCC ID : H8NTN502A1 Brand : TURBONET / Coppernic Model No. : TN502A1 Series Model : TN502A1(WOS), access, access(WOS) Standards : FCC 47 CFR Part 2 (2.1093), IEEE C95.1:1992, IEEE Std 1528:2013 KDB 865664 D01 v01r04, KDB 865664 D02 v01r02 KDB 248227 D01 v02r02, KDB 447498 D01 v06 KDB 648474 D04 v01r03, KDB 941225 D01 v03r01 KDB 941225 D05 v02r05, KDB 941225 D06 v02r01 Sample Received Date : Mar. 13, 2020 Date of Testing : Jun. 13, 2020 ~ Sep. 09, 2020 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Shelly Hsueh / Specialist Approved By : Gordon Lin / Manager FCC Accredited No.: TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 58 Report No. : SF200615C06 Issued Date : Oct. 15, 2020 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY6 System ............................................................................................................................................... 6 3.2.1 Robot ............................................................................................................................................................... 7 3.2.2 Probes ............................................................................................................................................................. 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 8 3.2.4 Phantoms ......................................................................................................................................................... 8 3.2.5 Device Holder .................................................................................................................................................. 9 3.2.6 System Validation Dipoles ............................................................................................................................. 10 3.2.7 Power Source ................................................................................................................................................ 10 3.2.8 Tissue Simulating Liquids .............................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 13 3.4 SAR Measurement Procedure ................................................................................................................................... 14 3.4.1 Area Scan and Zoom Scan Procedure .......................................................................................................... 14 3.4.2 Volume Scan Procedure …

Text truncated - open the document above for the full version.

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2020/07/07 P24 LTE 2_QPSK2 0M_Rear Face_15mm_Ch18700_1RB_OS0 DUT: 200313C17 Communication System: UID 10169 - CAE, LTE-FDD (SC-FDMA, 1 RB, 20 MHz, QPSK); Frequency: 1860 MHz;Duty Cycle: 1:3.74 Medium: H16T20N1_0707 Medium parameters used: f = 1860 MHz; σ = 1.425 S/m; ε r = 38.341; ρ = 1000 kg/m 3 Ambient Temperature：23.8 °C ; Liquid Temperature：23.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(8.34, 8.34, 8.34) @ 1860 MHz; Calibrated: 2019/08/30 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2019/08/27 - Phantom: Twin SAM Phantom_1653; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.52 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.42 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 1.72 W/kg SAR(1 g) = 1.02 W/kg; SAR(10 g) = 0.579 W/kg (SAR corrected for target medium) Smallest distance from peaks to all points 3 dB below = 12.8 mm Ratio of SAR at M2 to SAR at M1 = 62% Maximum value of SAR (measured) = 1.48 W/kg Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2020/07/07 P25 LTE 4_QPSK2 0M_Rear Face_15mm_Ch20300_1RB_OS0 DUT: 200313C17 Communication System: UID 10169 - CAE, LTE-FDD (SC-FDMA, 1 RB, 20 MHz, QPSK); Frequency: 1745 MHz;Duty Cycle: 1:3.74 Medium: H16T20N1_0707 Medium parameters used (interpolated): f = 1745 MHz; σ = 1.32 S/m; ε r = 38.833; ρ = 1000 kg/m 3 Ambient Temperature：23.8 °C ; Liquid Temperature：23.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(8.68, 8.68, 8.68) @ 1745 MHz; Calibrated: 2019/08/30 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2019/08/27 - Phantom: Twin SAM Phantom_1653; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.41 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 31.44 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 1.49 W/kg SAR(1 g) = 0.931 W/kg; SAR(10 g) = 0.522 W/kg (SAR corrected for target medium) Smallest distance from peaks to all points 3 dB below = 9.7 mm Ratio of SAR at M2 to SAR at M1 = 64.1% Maximum value of SAR (measured) = 1.27 W/kg Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2020/07/08 P26 LTE 5_QPSK10M_Rear Face_15mm_Ch20450_1RB_OS0 DUT: 200313C17 Communication System: UID 10175 - CAG, LTE-FDD (SC-FDMA, 1 RB, 10 MHz, QPSK); Frequency: 829 MHz;Duty Cycle: 1:3.74 Medium: H07T10N2_0708 Medium param eters used: f = 829 MHz; σ = 0.916 S/m; ε r = 40.523; ρ = 1000 kg/m 3 Ambient Temperature：23.8 °C ; Liquid Temperature：23.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(10.18, 10.18, 10.18) @ 829 MHz; Calibrated: 2019/08/30 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2019/08/27 - Phantom: Twin SAM Phantom_1653; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.367 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 20.29 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.392 W/kg SAR(1 g) = 0.293 W/kg; SAR(10 g) = 0.218 W/kg (SAR corrected for target medium) Smallest distance from peaks to all points 3 dB below: Larger than measurement grid Ratio of SAR at M2 to SAR at M1 = 75.7% Maximum value of SAR (measured) = 0.361 W/kg Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2020/07/07 P27 LTE 7_QPSK2 0M_Rear Face_15mm_Ch21350_1RB_OS0 DUT: 200313C17 Communication System: UID 10169 - CAE, LTE-FDD (SC-FDMA, 1 RB, 20 MHz, QPSK); Frequency: 2560 MHz;Duty Cycle: 1:3.74 Medium: H19T27N1_0707 Medium parameters used: f = 2560 MHz; σ = 2.003 S/m; ε r = 37.943; ρ = 1000 kg/m 3 Ambient Temperature：23.8 °C ; Liquid Temperature：23.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(7.64, 7.64, 7.64) @ 2560 MHz; Calibrated: 2019/08/30 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2019/08/27 - Phantom: Twin SAM Phantom_1653; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Area Scan (91x161x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.664 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 18.79 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 0.819 W/kg SAR(1 g) = 0.550 W/kg; SAR(10 g) = 0.290 W/kg (SAR corrected for target medium) Smallest distance from peaks to all points 3 dB below = 10.8 mm Ratio of SAR at M2 to SAR at M1 = 53.6% Maximum value of SAR (measured) = 0.677 W/kg Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2020/07/07 P28 LTE 17_QPSK1 0M_Rear Face_15mm_Ch23800_1RB_OS0 DUT: 200313C17 Communication System: UID 10175 - CAG, LTE-FDD (SC-FDMA, 1 RB, 10 MHz, QPSK); Frequency: 711 MHz;Duty Cycle: 1:3.74 Medium: H06T09N1_0707 Medium parameters used: f = 711 MHz; σ = 0.859 S/m; ε r = 42.93; ρ = 1000 kg/m 3 Ambient Temperature：23.8 °C ; Liquid Temperature：23.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(10.49, 10.49, 10.49) @ 711 MHz; Calibrated: 2019/08/30 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2019/08/27 - Phantom: Twin SAM Phantom_1653; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.221 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference…

Text truncated - open the document above for the full version.

Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) s Schwe1zerischer Kalibrierdienst C Service suisse d'etalonnage Servi:a:io svizzero di taratura Swiss Calibration Service s Accreditation No.: SCS 0108 The Swiss~creditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client B.V. ADT (Auden) Certificate No: EX3-3971 _Jan20 CALIBRATION CERTIFICATE Object EX3DV4 - SN:3971 Calibration procedure(s) QA CAL-01.v9, QA CAL-14.v5, QA CAL-23.vS, QA CAL-25.v7 Calibration procedure for dosimetric E-field probes Calibration date January 27, 2020 This calibration certificate documents the traceability to national standards. which reali,:e the physical units of measurements (SI). The measurements and the uncertainties with confidence probability are given on the following pages and a re part of the certificate All calibrations have been conducted in the closed laboratory facility: environment temperature (22±3)°C and humiclity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 03-Apr-19 (No. 217-02892102893) Apr-20 Power sensor NRP-Z91 SN. 103244 03-Apr-19 (No. 217-02892) Aor-20 Power sensor NRP-Z91 SN: 103245 03-Apr-19 (No. 217-02893) Apr-20 Reference 20 dB Attenuator SN: S5277 (20x) 04-Apr-19 (No. 217-02894) Apr-20 DAE4 SN: 660 27-Dec-19 (No. DAE4-660 Dec19) Dec-20 Reference Prol>e ES3DV2 SN: 3013 31-Dec-19 (No. ES3-3013 Dec19) Dec-20 Secondary Standards ID Check Date (in house) Scheduled Check Power meter E4419B SN: GB41293874 06-Apr-16 (1n house check Jun-1 BJ In house check: J un-20 Power sensor E4412A SN. MY41498087 06-Apr-16 (iri house check Juri-18) In house check·Jun-20 Power sensor E4412A SN: 000110210 06-Apr-16 (in house check Jun-18) In house check: Jun-20 RF generator HP 8648C SN: US3642U01700 04-Aug-99 (in house check Jun-18) In house check: Jun-20 Network Analyzer E8358A SN: US41080477 31-Mar-14 (in house check Oct-19) In house check·Oct-20 Calibrated by Name Michael Weber Function Laboratory Technician Signature )I虛幻7 Approved by: Katja Pokovic Technical Manager /棻之夕 Issued: February 4, 2020 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: EX3-3971_Jan20 Page 1 of 22 Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL NORMx,y,z ConvF DCP tissue simulating liquid sensitivity in free space sensitivity in TSL / NORMx,y,z diode compression point crest factor (1 /duty_ cycle) of the RF signal modulation dependent linearization parameters cp rotation around probe axis s Schwelzer1scher Kali brierdiens1 C Service sulsse d'etalonnage Servizio svizzero di taratura Swiss Calibration Service s Accreditation No.: SCS 0108 CF A,B,C,D Polarization <Jl Polarization ,9 Connector Angle a rotation around an axis that is in the plane normal to probe axis (at measurement center), i.e., ,q. = 0 is normal to probe axis information used in DASY system to align probe sensor X to the robot coordinate system Calibration is Performed According to the Following Standards: a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209-1, ", "Measurement procedure for the assessment of Specific Absorption Rate {SAR) from hand- held and body-mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209-2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 ct) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Methods Applied and Interpretation of Parameters: • NORMx,y,z: Assessed for E-field polarization ,t, = 0 (f :-,; 900 MHz in TEM-cell; f > 1800 MHz: R22 waveguide) NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not affect the E2-field uncertainty inside TSL (see below ConvF) • NORM(f)x,y,z = NORMx,y,z .. frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. • DCPx,y z: DCP , are numerical hnearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. • PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics • Ax,y,z; Bx,y,z; Cx,y,z; Dx,y,z; VRx,y,z: A B C D ,,, are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. • ConvF and Boundary Effect Parameters: Assessed in flat phantom using E-field (or Temperature Transfer Standard for f邙 800MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z "ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in …

Text truncated - open the document above for the full version.

SAR Test Report Report Format Version 5.0.0 Issued Date : Oct. 15, 2020 Report No. : SF200615C06 Appendix D. Photographs of EUT and Setup The setup photographs for SAR testing are shown as follows. SAR Test Report Report Format Version 5.0.0 Issued Date : Oct. 15, 2020 Report No. : SF200615C06 Appendix E. Maximum Target Conducted Power The maximum conducted average power (Unit: dBm) including tune-up tolerance is shown as below. GSM850 GSM1900 Maximum Target Power Maximum Target Power GSM (GMSK, 1Tx-slot) 33.030.524.021.5 GPRS (GMSK, 1Tx-slot) 33.030.524.021.5 GPRS (GMSK, 2Tx-slot) 30.028.024.022.0 GPRS (GMSK, 3Tx-slot) 28.526.024.221.7 GPRS (GMSK, 4Tx-slot) 27.524.524.521.5 DTM (GMSK, 2Tx-slot) 30.028.024.022.0 DTM (GMSK, 3Tx-slot) 28.026.023.721.7 EDGE (8PSK, 1Tx-slot) 27.026.518.017.5 EDGE (8PSK, 2Tx-slot) 27.026.521.020.5 EDGE (8PSK, 3Tx-slot) 27.026.522.722.2 EDGE (8PSK, 4Tx-slot) 27.026.524.023.5 DTM (8PSK, 2Tx-slot) 27.527.021.521.0 DTM (8PSK, 3Tx-slot) 27.526.023.2421.74 GSM850 Mode Maximum Burst- Averaged Output Maximum Burst- Averaged Output GSM1900 GSM Tune-up Power (Full) Maximum Frame-Averaged Output Power Maximum Target Power Maximum Target Power WCDMA Band II 24.023.0 WCDMA Band IV 24.523.5 WCDMA Band V 24.523.5 Mode RMC 12.2K WCDMA Tune-up Power (Full) HSDPA / DC-HSDPA / HSUPA 64QAM Maximum Target Power Maximum Target Power Maximum Target Power LTE 2 23.522.521.5 LTE 4 23.522.521.5 LTE 5 23.522.521.5 LTE 7 22.521.520.5 LTE 17 23.522.521.5 LTE 26 23.522.521.5 LTE 38 23.022.021.0 LTE 41 23.022.021.0 Mode LTE Tune-up Power (Full) QPSK16QAM GSM850 GSM1900 Maximum Target Power Maximum Target Power GSM (GMSK, 1Tx-slot) 30.521.5 GPRS (GMSK, 1Tx-slot) 30.521.5 GPRS (GMSK, 2Tx-slot) 27.521.5 GPRS (GMSK, 3Tx-slot) 25.521.2 GPRS (GMSK, 4Tx-slot) 24.021.0 DTM (GMSK, 2Tx-slot) 27.521.5 DTM (GMSK, 3Tx-slot) 25.521.2 EDGE (8PSK, 1Tx-slot) 24.515.5 EDGE (8PSK, 2Tx-slot) 24.518.5 EDGE (8PSK, 3Tx-slot) 24.520.2 EDGE (8PSK, 4Tx-slot) 23.520.5 DTM (8PSK, 2Tx-slot) 24.518.5 DTM (8PSK, 3Tx-slot) 24.520.2 GSM Tune-up Power (Hotspot) Mode GSM1900 Maximum Burst- Averaged Output Maximum Frame-Averaged Output Power GSM850 Maximum Burst- Averaged Output Maximum Target Power Maximum Target Power WCDMA Band II 19.518.5 WCDMA Band IV 19.518.5 WCDMA Band V 19.00.0 WCDMA Tune-up Power (Hotspot) HSDPA / DC-HSDPA / HSUPA Mode RMC 12.2K 64QAM Maximum Target Power Maximum Target Power Maximum Target Power LTE 2 19.519.519.5 LTE 4 19.519.519.5 LTE 5 0.0-1.0 LTE 7 21.521.520.5 LTE 17 0.0-1.0 LTE 26 0.0-1.0 LTE 38 0.0-1.0 LTE 41 21.521.520.5 Mode QPSK16QAM LTE Tune-up Power (Hotspot) ModeChannel Frequency Max Tune up 12412 18.0 62437 18.0 112462 18.0 12412 18.0 62437 18.0 112462 18.0 12412 18.0 62437 18.0 112462 18.0 32422 17.5 62437 17.5 92452 17.5 802.11g 802.11b 802.11n HT40 WLAN Tune-up Power 802.11n HT20 WLAN2.4GHz Ant 0 WLAN Tune-up Power ModeChannel Frequency Max Tune up 02402 11.0 392441 11.5 782480 10.5 024021.0 1924401.0 3924801.0 Ant 0Bluetooth LE BR / EDR WLAN Tune-up Power ModeChannel Frequency Max Tune up 365180 19.0 405200 19.0 445220 19.0 485240 19.0 365180 19.0 405200 19.0 445220 19.0 485240 19.0 385190 19.0 465230 19.0 802.11ac VHT80425210 19.0 Ant 0WLAN 5.2GHz 802.11a 802.11n HT20 802.11n HT40 WLAN Tune-up Power ModeChannel Frequency Max Tune up 525260 19.0 565280 19.0 605300 19.0 645320 19.0 525260 19.0 565280 19.0 605300 19.0 645320 19.0 545270 19.0 625310 19.0 802.11ac VHT80585290 19.0 802.11a 802.11n HT20 802.11n HT40 WLAN 5.3GHz Ant 0 WLAN Tune-up Power ModeChannel Frequency Max Tune up 1005500 19.0 1165580 19.0 1205600 19.0 1245620 19.0 1325660 19.0 1405700 19.0 1005500 19.0 1165580 19.0 1205600 19.0 1245620 19.0 1325660 19.0 1405700 19.0 1025510 19.0 1105550 19.0 1185590 19.0 1265630 19.0 1345670 19.0 1065530 19.0 1225610 19.0 1385690 19.0 802.11a WLAN 5.6GHz Ant 0 802.11n HT20 802.11n HT40 802.11ac VHT80 WLAN Tune-up Power ModeChannel Frequency Max Tune up 1495745 19.0 1535765 19.0 1575785 19.0 1615805 19.0 1655825 19.0 1495745 19.0 1535765 19.0 1575785 19.0 1615805 19.0 1655825 19.0 1515755 19.0 1595795 19.0 802.11ac VHT801555775 19.0 WLAN 5.8GHz Ant 0 802.11a 802.11n HT20 802.11n HT40 SAR Test Report Report Format Version 5.0.0 Issued Date : Oct. 15, 2020 Report No. : SF200615C06 Appendix F. Measured Conducted Power Result The measuring conducted power (Unit: dBm) are shown as below. Band Channel128189251512661810 Frequency824.2 836.4 848.8 1850.2 1880 1909.8 GSM32.9132.9532.9330.4830.42 30.19 GPRS 1Tx Slot32.89 32.93 32.90 30.46 30.41 30.28 GPRS 2Tx Slot29.93 29.97 29.94 27.57 27.52 27.39 GPRS 3Tx Slot28.01 28.05 28.02 25.53 25.48 25.35 GPRS 4Tx Slot27.11 27.15 27.12 24.45 24.40 24.27 DTM 9 (GPRS)29.83 29.87 29.84 27.76 27.71 27.58 DTM 11 (GPRS)27.91 27.95 27.92 25.64 25.59 25.46 EDGE 1Tx Slot (MCS9)26.95 26.99 26.96 25.90 25.85 25.72 EDGE 2Tx Slot (MCS9)26.84 26.88 26.85 25.78 25.73 25.60 EDGE 3Tx Slot (MCS9)26.70 26.74 26.71 25.67 25.62 25.49 EDGE 4Tx Slot (MCS9)26.56 26.60 26.57 25.60 25.55 25.42 DTM 9 (EDGE)27.40 27.44 27.41 26.67 26.62 26.49 DTM 11 (EDGE)27.23 27.27 27.24 25.61 25.56 25.43 GSM Conducted Power (Full) GSM850GSM1900 Band TX Channel9262 9400 9538 1312 1413 1513 4132 4182 4233 Rx Channel9662 9800 9938 1537 1638 1738 4357 4407 4458 Frequency1852.4 1880 1907.6 1712.4 1732.6 1752.6 826.4 836.4 846.6 RMC 12.2K23.9523.79 23.9124.4724.22 24.41 24.13 24.0324.16 HSDPA Subtest-122.92 22.77 22.84 23.49 23.26 23.49 23.15 23.03 23.21 HSDPA Subtest-222.93 22.85 22.88 23.48 23.24 23.47 23.13 23.09 23.20 HSDPA Subtest-322.44 22.31 22.37 22.91 22.75 22.07 22.74 22.58 22.78 HSDPA Subtest-422.43 22.37 22.39 22.96 22.78 22.94 22.63 22.57 22.81 DC-HSDPA Subtest-122.90 22.75 22.82 23.46 23.24 23.47 23.13 23.01 23.19 DC-HSDPA Subtest-222.91 22.83 22.86 23.50 23.22 23.45 23.11 23.07 23.18 DC-HSDPA Subtest-322.42 22.29 22.35 22.98 22.73 22.05 22.72 22.56 22.76 DC-HSDPA Subtest-422.41 22.35 22.37 22.99 22.76 22.98 22.61 22.55 22.79 HSUPA Subtest-122.90 22.77 22.87 23.47 23.23 23.45 23.20 2…

Text truncated - open the document above for the full version.

Report No.: RF200615C06-3 Page No. 1 / 53 Report Format Version: 6.1.1 FCC Test Report Report No.: RF200615C06-3 FCC ID: H8NTN502A1 Test Model: TN502A1 Series Model: TN502A1(WOS), access, access(WOS) (refer to item 3.1 for more details) Received Date: Apr. 04, 2020 Test Date: Apr. 30 ~ Oct. 23, 2…

Text truncated - open the document above for the full version.