HBOW320Mini Bluetooth Speaker

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Speaker Overview Main unit x 1 User manual x 1 USB Charging Cord x 1 Package Contents Important Safety Instructions 1. Always read Safety and Operation instructions before use. Retain instructions for later reference. 2. For indoor use only. Do not expose the speaker to liquid, moisture or humidity. 3. Do not use abrasive cleaners to clean the speaker case as they may damage the finish. Always unplug the unit before cleaning. 4. Do not expose the speaker to extremely high or low temperatures. 5. Keep the unit away from direct sunlight. 6. Use only accessories and attachments as supplied and designated in the instruction manual. 7. Do not attempt to open or modify the speaker in any way, as it does not contain any serviceable parts. Please refer all servicing to qualified personnel. 8. Please store the unit in a dry place that is free from extreme temperatures and dust. 9. Always operate the speaker on a flat and level surface. 10. Always operate the speaker away from children and small animals as they may play with the power cord and other small parts. 11. Always dispose of the packaging and the unit in accordance with the local regulations and in a responsible manner. User Manual R Thank you for purchasing the Mini Bluetooth Speaker for smart phones, tablets, notebook computers and other Bluetooth enabled devices. This product combines high-tech innovation with design to provide you with years of dependability and enjoyment. Safety Precautions and Maintenance Please read these operating and maintenance (servicing) instructions before installing and operating your speaker. Warning: To reduce the risk of fire or electric shock, do not expose this speaker system to rain or moisture (including swimming pools or objects filled with liquids, such as vases or drinks). The FCC Wants You To Know Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Mini Bluetooth Speaker User Manual QAB14AV001 R 8.Charging port 9.Battery LED 10.AUX-IN 1.Power ON/OFF Switch 2.Volume down 3.Volume up 4.Bluetooth pairing 5.Speaker phone 6.MIC 7.Power LED Aux in Use a 3.5mm cable (not included) to connect the speaker to another audio source. Press Play on the device and adjust the volume on the unit to obtain the desired volume. Charge Can be charged by using the USB to Micro USB cord (included) through computer or AC adaptor with USB jack (not included). Approximately 2.5 hours required for full charge. Solid red light means the battery is charging. Red light off means the charge is complete. Note: When your battery is low, the red light will blink slowly, and you will hear a warning tone. Features Digital Signal Processer for rich sound 3.5mm Aux-in jack for playing MP3 and other audio devices Works with Bluetooth devices Rechargeable Hands-free Bluetooth speaker phone Technical Specifications Transducers: 2 x 2” (48.5mm) Amplifier power: 2.8W x 2 Frequency response: 100Hz – 20kHz Signal-to-noise ratio: 65dB Battery type: Li-ion rechargeable Bluetooth transmitter frequency range: 2.402 – 2.480GHz Bluetooth transmitter power: 0 – 4dBm Listening time on battery power: Up to 5 hours (Varies by volume level and audio content) Battery charge time: 2.5 hours Dimensions (W x D x H): 146mm x 22mm x 73mm 123 4567 Play Press and hold to switch on, press and hold to switch off. The blue LED flashes quickly. Bluetooth connect On the Bluetooth device, switch on Bluetooth and search for Mini. For the first time connection, select Mini to start connection. After your connection is successful, you will hear “Your device is connected”. 8 9 10 Now you can begin to play music on your speaker. Press “ ” “ ” to adjust volume, and short press “ ” to Pause or Play. Long press “ ” to pair. Bl Mini uetooth Conference Mode When receiving an incoming call on your cell phone via Bluetooth linked with the speaker, tap “ ”to answer. Press“ ” “ ”to obtain the desired sound level. To end the call, just tap the PHONE“ ” on the speaker. To ignore an incoming call, simply press and hold the “ ”on the speaker for about 2 seconds. LINE-IN 30 feet The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (current) 3.0 4.0 May-23-2014

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012

Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1407866F FCC ID: HBOW320 Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1407866F FCC ID: HBOW320 Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1407866F FCC ID: HBOW320 Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1407866F FCC ID: HBOW320 Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1407866F FCC ID: HBOW320

3mm 33mm 2mm Made in China MODEL: QAB14AV001 FCC ID: HBOW320 CHARGEAUX IN Input: 5V 500mA

Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1407866F FCC ID: HBOW320 Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1407866F FCC ID: HBOW320 BT Chip BT Antenna

Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1407866F FCC ID: HBOW320 RF EXPOSURE EVALUATION EUT Specification EUT Mini Bluetooth Speaker Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Others(Bluetooth: 2.402GHz ~ 2.480GHz) Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power -1.79dBm (0.66mW) Antenna gain 2 dBi Evaluation applied MPE Evaluation SAR Evaluation Standard Requirement Portable Device According to §15.247(i) and §1.1307b(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. See KDB 447498 D01 General RF Exposure Guidance v05, section 4.3.1. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, 16 where ·f(GHz) is the RF channel transmit frequency in GHz ·Power and distance are rounded to the nearest mW and mm before calculation17 ·The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1407866F FCC ID: HBOW320 Measurement Result Channel Channel Frequency (MHz) Max Output AVG power (dBm) Max Output AVG power (mW) Calculation Value (Note 1) Threshold Value GFSK Low 2402.00 -4.10 0.39 0.12 3.0 Middle 2441.00 -1.79 0.66 0.21 3.0 High 2480.00 -3.26 0.47 0.15 3.0 π/4-DQPSK Low 2402.00 -4.91 0.32 0.10 3.0 Middle 2441.00 -2.46 0.57 0.18 3.0 High 2480.00 -3.85 0.41 0.13 3.0 8DPSK Low 2402.00 -4.88 0.33 0.10 3.0 Middle 2441.00 -2.44 0.57 0.18 3.0 High 2480.00 -3.87 0.41 0.13 3.0 Note 1: Calculation Value =[(max. power of channel, mW)/(min. test separation distance, mm)] ·[√f(GHz)]. Fox example: 0.39/5*√2.402=0.12 ≤ 3.0 According to KDB447498 D01 v05, threshold at which no SAR required is ≤3.0 for 1-g SAR, separation distance is 5mm, and no simultaneous SAR measurement is required.

Page 1 of 57 Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1407866F FCC ID: HBOW320 Page 2 of 57 Table of Contents 1. GENERAL INFORMATION ................................................................................................ 4 1.1 P RODUCT D ESCRIPTION FOR E QUIPMENT UNDER T EST .................................................................... 4 1.2 R ELATED S UBMITTAL ( S ) / G RANT ( S )................................................................................................ 5 1.3 T EST M ETHODOLOGY ...................................................................................................................... 5 1.4 E QUIPMENT M ODIFICATIONS ............................................................................................................ 5 1.5 S UPPORT D EVICE ............................................................................................................................ 5 1.6 T EST F ACILITY AND L OCATION .......................................................................................................... 5 1.7 S UMMARY OF T EST R ESULTS ........................................................................................................... 6 2. SYSTEM TEST CONFIGURATION .................................................................................... 7 2.1 EUT C ONFIGURATION ...................................................................................................................... 7 2.2 S PECIAL A CCESSORIES .................................................................................................................... 7 2.3 D ESCRIPTION OF TEST MODES ......................................................................................................... 7 2.4 EUT E XERCISE ................................................................................................................................7 3. CONDUCTED EMISSIONS TEST ...................................................................................... 8 3.1 T EST SET-UP (B LOCK D IAGRAM OF C ONFIGURATION )..................................................................... 8 3.2 T EST C ONDITION ............................................................................................................................. 8 3.3 M EASUREMENT R ESULTS ................................................................................................................. 8 4. RADIATED EMISSION TEST........................................................................................... 11 4.1 T EST SET-UP (B LOCK D IAGRAM OF C ONFIGURATION )................................................................... 11 4.2 M EASUREMENT P ROCEDURE ......................................................................................................... 12 4.3 L IMIT .............................................................................................................................................. 13 4.4 M EASUREMENT R ESULTS ..................................................................................................... 14 5. CHANNEL SEPARATION TEST ...................................................................................... 18 5.1 M EASUREMENT P ROCEDURE ......................................................................................................... 18 5.2 T EST SET-UP (B LOCK D IAGRAM OF C ONFIGURATION )................................................................... 18 5.3 M EASUREMENT R ESULTS ............................................................................................................... 18 6. 20DB BANDWIDTH.......................................................................................................... 24 6.1 M EASUREMENT P ROCEDURE ......................................................................................................... 24 6.2 T EST SET-UP (B LOCK D IAGRAM OF C ONFIGURATION )................................................................... 24 6.3 M EASUREMENT R ESULTS ............................................................................................................... 24 7. HOPPING CHANNEL NUMBER ...................................................................................... 25 7.1 M EASUREMENT P ROCEDURE ......................................................................................................... 30 7.2 T EST SET-UP (B LOCK D IAGRAM OF C ONFIGURATION )................................................................... 30 7.3 M EASUREMENT R ESULTS ............................................................................................................... 30 Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1407866F FCC ID: HBOW320 Page 3 of 57 8. TIME OF OCCUPANCY (DWELL TIME).......................................................................... 32 8.1 M EASUREMENT P ROCEDURE ......................................................................................................... 32 8.2 M EASUREMENT R ESULTS ............................................................................................................... 32 9. MAXIMUM PEAK OUTPUT POWER ............................................................................... 32 9.1 M EASUREMENT P ROCEDURE ......................................................................................................... 38 9.2 M EASUREMENT R ESULTS ............................................................................................................... 38 10. BAND EDGE ..................................................................................................................38 10.1 M EASUREMENT P ROCEDURE ....................................................................................................... 44 10.2 L IMIT ............................................................................................................................................ 44 10.3 M EASUREMENT…

Text truncated - open the document above for the full version.

Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1407866F FCC ID: HBOW320 Conducted Emission Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1407866F FCC ID: HBOW320 Radiated Emission