HLZA1410Tablet Computer

Product overview 12 3 10 4 5 6 8 7 9 1. Audio jack 2. Micro USB port 3. Microphone 4. microSD card slot 5. Front camera 6. Power button 7. Volume button 8. Touchscreen 9. Camera 10. Speakers * Components may vary. Home screen 1 2 3 4 5 4 6 Note: Your tablet may have a different wallpaper to the one shown. 1. Notification bar 2. Search 3. Widgets 4. App shortcuts 5. Navigation (Back, Home, Recent) 6. Application menu (also known as "Apps") Getting started Using your tablet 1. Connect the power adapter Charge your tablet for at least four hours. Note: It is normal for the device surface to become warm during charging or long periods of use. 2. Press the power button Hold until you see the Acer logo. Connecting to the Internet via Wi-Fi To connect to a Wi-Fi network, tap the Application menu , then tap Settings . Under Wireless & networks, ensure Wi-Fi is ON. Tap Wi-Fi and then tap a wireless network; if necessary enter a security password to access the network. How to register To register your Acer product, visit our website at registration.acer.com. After we receive your product registration, you will be sent a confirmation email with important data that you should keep in a safe place. Your tablet's User's Manual To download the User's Manual, go to www.acer.com and click Support > DRIVERS AND MANUALS. Select the appropriate items from Group > Series > Products. In the Documents tab, click Download next to the User’s Manual. Connecting a Bluetooth device To connect to a bluetooth device, tap the Application menu , then tap Settings . Under Wireless & networks, ensure Bluetooth is ON. Tap Bluetooth and then SEARCH FOR DEVICES to scan for available devices. Then tap an available device to select a device. Note: A2DP stereo headsets are supported for playback only. Please check for updates to the tablet's software that may add support for additional Bluetooth devices. Restoring to factory settings Tap the Application menu , then tap Settings . Tap Backup & reset > Factory data reset; tap Reset tablet and then Erase everything to format your tablet. Updating your tablet’s operating system To check for updates, tap the Application menu , then tap Settings . Then tap About tablet > System updates > Check now. Acer Touch WakeApp Touch WakeApp is a convenient application that allows you to easily wake up your tablet from sleep mode and launch a defined app, using simple gestures. Enable Touch WakeApp Gestures 1. Pull down the notification area from the right corner. 2. Tap the Touch WakeApp icon to bring up Gesture Configure. 3. Slide ON to enable your desired item. 4. Tap and hold the item you have enabled to open a list of apps that can be automatically launched after the tablet is woken up. Note: Only portrait mode is supported when using the 2-thumb gesture. Hold the tablet with both thumbs near the edge of the screen to wake your tablet. 5. Select your app and tap OK. Alternatively, you may also tap Apps > Settings > Acer Touch WakeApp. Note: If there are multiple user accounts on your tablet, the Application Shortcuts function will only be available on the Administrator account. All other users will only be able to wake up the system to the Home screen. For more information on Acer Touch WakeApp, refer to the User’s Manual. 5-finger gesture2-thumb gesture2-finger gestureDouble-tap gesture Safety and comfort SAFETY INSTRUCTIONS Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. WARNINGS Accessing the power plug Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power plug from the electrical outlet. Mark sure the power plug is fixed at right position with the adaptor before plugging to the socket on the wall. Input rating: Refer to the rating label on the bottom of the computer and ensure that your power adapter complies with the specified rating. Under no circumstances should the user attempt to disassemble the power supply. The power supply has no user-replaceable parts. Inside the power supply are hazardous voltages that can cause serious personal injury. A defective power supply must be returned to your dealer. Using electrical power - If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. - Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating. General - Do not use this product near water. - Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. - Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. - Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or shortout parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product. - To avoid damage of internal components and to prevent battery leakage, do…

Text truncated - open the document above for the full version.

Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih New Taipei City 22181, Taiwan, R.O.C. TEL: +886-2-2696-3131 ext.3089 Fax : 886-2-8691-3120 www.acer.com Date:2011/8/22 To who may concern, I, the undersigned, responsible for the designated person in FCC grant communicator / IC company code contactor, hereby authorized RU Jan to sign the FCC / IC application form for certification process. Thank you, Sincerely Yours, Contact Person: Harriot S.L. Lee Company Name: Acer Incorporated E-Mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6

PROJECT : Vespa 8 DATE: 2014/09/01 0.8mm blank label for special printing 35 * 10 mm 35x5mm 35x10mm SNID:3279169015 MFG Date:2014.XX Acer Logo Mylar: semi-Chrome 18.8mm 18.8mm 75mm 0.8mm 47.5mm 23mm

Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16

FCC ID: HLZA1410 Report No.: RF140828C01 Operational Description This device is a Tablet Computer, which operates in 2.4GHz bands for WLAN and Bluetooth; the maximum data rate could be up to 72.2Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 72.2Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by 3.8Vdc from battery, 5Vdc from host equipment or 5.35Vdc, 5.2Vdc form adapter. The antenna is PIFA antenna with IPEX antenna connectors. The other instruction, please have a look at the users manual.

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 23 Report No. : SA140828C01 Issued Date : Sep. 23, 2014 FCC SAR Test Report Report No. : SA140828C01 Applicant : Acer Incorporated Address : 8F., No.88, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City 221, Taiwan Product : Tablet Computer FCC ID : HLZA1410 Brand : Acer Model No. : A1410 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r03 / KDB 248227 D01 v01r02 KDB 447498 D01 v05r02 / KDB 616217 D04 v01r01 Sample Received Date : Aug. 28, 2014 Date of Testing : Sep. 16, 2014 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Gina Liu / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 23 Report No. : SA140828C01 Issued Date : Sep. 23, 2014 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 16 3.4.5 SAR Averaged Methods ............................…

Text truncated - open the document above for the full version.

Report No.: RF140828C01-1 1 of 50 Report Format Version 5.0.0 FCC TEST REPORT (Bluetooth EDR) REPORT NO.: RF140828C01-1 MODEL NO.: A1410 FCC ID: HLZA1410 RECEIVED: Aug. 28, 2014 TESTED: Sep. 05 ~ Sep. 19, 2014 ISSUED: Sep. 22, 2014 APPLICANT: Acer Incorporated ADDRESS: 8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City 221, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140828C01-1 2 of 50 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .............................................................................................................. 4 1. CERTIFICATION ........................................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ........................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................................ 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 11 4. TEST TYPES AND RESULTS .................................................................................................... 12 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................... 12 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................. 12 4.1.2 TEST INSTRUMENTS ................................................................................................................ 13 4.1.3 TEST PROCEDURES ................................................................................................................ 14 4.1.4 DEVIATION FROM TEST STANDARD ...................................................................................... 14 4.1.5 TEST SETUP .............................................................................................................................. 15 4.1.6 EUT OPERATING CONDITIONS ............................................................................................... 16 4.1.7 TEST RESULTS ......................................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................................. 25 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................................... 25 4.2.2 TEST INSTRUMENTS ................................................................................................................ 25 4.2.3 TEST PROCEDURES ................................................................................................................ 26 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................................... 26 4.2.5 TEST SETUP .............................................................................................................................. 27 4.2.6 EUT OPERATING CONDITIONS ............................................................................................... 27 4.2.7 TEST RESULTS ......................................................................................................................... 28 4.3 NUMBER OF HOPPING FREQUENCY USED .......................................................................... 32 4.3.1 LIMIT OF HOPPING FREQUENCY USED ................................................................................ 32 4.3.2 TEST SETUP ....................................................…

Text truncated - open the document above for the full version.

Report No.: RF140828C01-2 1 of 39 Report Format Version 5.1.0 FCC TEST REPORT (Bluetooth LE) REPORT NO.: RF140828C01-2 MODEL NO.: A1410 FCC ID: HLZA1410 RECEIVED: Aug. 28, 2014 TESTED: Sep. 05 ~ Sep. 19, 2014 ISSUED: Sep. 22, 2014 APPLICANT: Acer Incorporated ADDRESS: 8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City 221, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140828C01-2 2 of 39 Report Format Version 5.1.0 Table of Contents RELEASE CONTROL RECORD .............................................................................................. 4 1. CERTIFICATION ........................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................ 6 3. GENERAL INFORMATION ........................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ....................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................ 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 11 4. TEST TYPES AND RESULTS .................................................................................... 12 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................... 12 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................. 12 4.1.2 TEST INSTRUMENTS ................................................................................................ 13 4.1.3 TEST PROCEDURES ................................................................................................ 14 4.1.4 DEVIATION FROM TEST STANDARD....................................................................... 14 4.1.5 TEST SETUP .............................................................................................................. 15 4.1.6 EUT OPERATING CONDITIONS ............................................................................... 16 4.1.7 TEST RESULTS ......................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 22 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................... 22 4.2.2 TEST INSTRUMENTS ................................................................................................ 22 4.2.3 TEST PROCEDURES ................................................................................................ 23 4.2.4 DEVIATION FROM TEST STANDARD....................................................................... 23 4.2.5 TEST SETUP .............................................................................................................. 24 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 24 4.2.7 TEST RESULTS ......................................................................................................... 25 4.3 6dB BANDWIDTH MEASUREMENT .......................................................................... 29 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ....................................................... 29 4.3.2 TEST SETUP .............................................................................................................. 29 4.3.3 TEST INSTRUMENTS ................................................................................................ 29 4.3.4 TEST PROCEDURE ................................................................................................... 29 4.3.5 DEVIATION FROM TEST STANDARD....................................................................... 29 4.3.6 EUT OPERATING CONDITIONS ...........................…

Text truncated - open the document above for the full version.

Report No.: RF140828C01 1 of 52 Report Format Version 5.2.1 FCC TEST REPORT (WLAN) REPORT NO.: RF140828C01 MODEL NO.: A1410 FCC ID: HLZA1410 RECEIVED: Aug. 28, 2014 TESTED: Sep. 05 ~ Sep. 16, 2014 ISSUED: Sep. 18, 2014 APPLICANT: Acer Incorporated ADDRESS: 8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City 221, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140828C01 2 of 52 Report Format Version 5.2.1 TABLE OF CONTENTS RELEASE CONTROL RECORD ......................................................................................... 4 1. CERTIFICATION ..................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 6 3. GENERAL INFORMATION ...................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ........................................................................ 7 3.2 DESCRIPTION OF TEST MODES .......................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .......................... 9 3.3 DUTY CYCLE OF TEST SIGNAL ........................................................................... 11 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................. 12 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 12 4. TEST TYPES AND RESULTS ............................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............. 13 4.1.2 TEST INSTRUMENTS ........................................................................................... 14 4.1.3 TEST PROCEDURES ........................................................................................... 15 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 15 4.1.5 TEST SETUP ......................................................................................................... 16 4.1.6 EUT OPERATING CONDITIONS .......................................................................... 17 4.1.7 TEST RESULTS .................................................................................................... 18 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................ 29 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................... 29 4.2.2 TEST INSTRUMENTS ...........…

Text truncated - open the document above for the full version.