HLZA24001Tablet PC

Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-15-2023 Ref: Attestation Statements Part 2.911(d)(7) Filing [Acer Incorporated] (“the applicant”) certifies that, as of the date of the filing of the application, [Acer America Corporation] is our designated U.S. agent for service of process. [Acer Incorporated] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. [Acer America Corporation] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process. Sincerely, Designated U.S. Agent Information: Name: Acer America Corporation FRN: 0033486168 Contact Person: Young Kim Address: 1730 North First Street, Suite 400, San Jose, CA 95112 Tel.: (408) 533 7700 Email: [email protected] U.S. Agent Signature: Applicant: Company Name: Acer Incorporated Grantee Code: HLZ Contact Person: RU Jan Tel.: +886-2-8691-3289 Email: [email protected] Applicant Signature: FRN: 0013355508

Labellocation Back of thedevice

0 dB = 21.1 W/kg = 13.24 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/15 System Check_Head_2450MHz DUT: D2450V2-736 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450_240115 Medium parameters used : f = 2450 MHz; σ = 1.818 S/m; ε r = 39.597; ρ = 1000 kg/m 3 Ambient Temperature：23.6 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7692; ConvF(7.59, 7.41, 8.57) @ 2450 MHz; Calibrated: 2023/7/18 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1311; Calibrated: 2023/9/13 - Phantom: ELI V4.0_Right; Type: QD OVA 001 BB; Serial: TP:1025 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7501) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 21.2 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 114.7 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 25.5 W/kg SAR(1 g) = 12.9 W/kg; SAR(10 g) = 6.06 W/kg Smallest distance from peaks to all points 3 dB below = 9 mm Ratio of SAR at M2 to SAR at M1 = 50.8% Maximum value of SAR (measured) = 21.1 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/15 System Check_Head_5250MHz DUT: D5GHzV2-1006 Communication System: CW ; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: HSL_5G_240115 Medium parameters used : f = 5250 MHz; σ = 4.732 S/m; ε r = 35.979; ρ = 1000 kg/m 3 Ambient Temperature：23.6 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7692; ConvF(5.84, 5.74, 6.7) @ 5250 MHz; Calibrated: 2023/7/18 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1311; Calibrated: 2023/9/13 - Phantom: ELI V4.0_Right; Type: QD OVA 001 BB; Serial: TP:1025 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7501) Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 19.1 W/kg Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 70.76 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 32.4 W/kg SAR(1 g) = 7.92 W/kg; SAR(10 g) = 2.27 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 64.7% Maximum value of SAR (measured) = 19.6 W/kg 0 dB = 19.6 W/kg = 12.92 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/15 System Check_Head_5600MHz DUT: D5GHzV2-1006 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: HSL_5G_240115 Medium parameters used: f = 5600 MHz; σ = 5.066 S/m; ε r = 35.524; ρ = 1000 kg/m 3 Ambient Temperature：23.6 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7692; ConvF(5.09, 4.94, 5.73) @ 5600 MHz; Calibrated: 2023/7/18 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1311; Calibrated: 2023/9/13 - Phantom: ELI V4.0_Right; Type: QD OVA 001 BB; Serial: TP:1025 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7501) Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 22.3 W/kg Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 73.04 V/m; Power Drift = 0.16 dB Peak SAR (extrapolated) = 38.7 W/kg SAR(1 g) = 8.8 W/kg; SAR(10 g) = 2.51 W/kg Smallest distance from peaks to all points 3 dB below = 7.4 mm Ratio of SAR at M2 to SAR at M1 = 62.1% Maximum value of SAR (measured) = 22.4 W/kg 0 dB = 22.4 W/kg = 13.50 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/15 System Check_Head_5750MHz DUT: D5GHzV2-1006 Communication System: CW; Frequency: 5750 MHz;Duty Cycle: 1:1 Medium: HSL_5G_240115 Medium parameters used: f = 5750 MHz; σ = 5.236 S/m; ε r = 35.296; ρ = 1000 kg/m 3 Ambient Temperature：23.6 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7692; ConvF(5.23, 5.12, 5.97) @ 5750 MHz; Calibrated: 2023/7/18 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1311; Calibrated: 2023/9/13 - Phantom: ELI V4.0_Right; Type: QD OVA 001 BB; Serial: TP:1025 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7501) Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 20.2 W/kg Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 68.46 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 36.6 W/kg SAR(1 g) = 7.95 W/kg; SAR(10 g) = 2.25 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 60.9% Maximum value of SAR (measured) = 20.8 W/kg 0 dB = 20.8 W/kg = 13.18 dBW/kg 0 dB = 20.2 W/kg = 13.11 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/2/08 System Check_Head_2450MHz DUT: D2450V2-736 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2400_240208 Medium parameters used : f = 2450 MHz; σ = 1.791 S/m; ε r = 39.399; ρ = 1000 kg/m 3 Ambient Temperature：23.5 °C; Liquid Temperature：22.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN7692; ConvF(7.59, 7.41, 8.57) @ 2450 MHz; Calibrated: 2023/7/18 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1311; Calibrated: 2023/9/13 - Phantom: ELI V4.0_Right; Type: QD OVA 001 BB; Serial: TP:1025 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7501) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 20.9 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 114.2 V/m; Power Drift = -0.16 dBPeak SAR (extrapolated) = 25.0 W/kg SAR(1 g) = 12.7 W/kg; SAR(10 g) = 5.97 W/kg Smallest distance from peaks to all points 3 dB below = 9.3 mm Ratio of SAR at M2 to SAR at M1 = 50.4%…

Text truncated - open the document above for the full version.

Communication System: 802.11b; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: HSL_2400_240115 Medium parameters used : f = 2437 MHz; σ = 1.803 S/m; ε r = 39.469; ρ = 1000 kg/m 3 Ambient Temperature：23.6 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7692; ConvF(7.59, 7.41, 8.57) @ 2437 MHz; Calibrated: 2023/7/18 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1311; Calibrated: 2023/9/13 - Phantom: ELI V4.0_Right; Type: QD OVA 001 BB; Serial: TP:1025 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7501) Area Scan (101x111x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 1.93 W/kg Zoom Scan (7x7x5)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 33.59 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 2.63 W/kg SAR(1 g) = 1.02 W/kg; SAR(10 g) = 0.429 W/kg Smallest distance from peaks to all points 3 dB below = 6.7 mm Ratio of SAR at M2 to SAR at M1 = 40.6% Maximum value of SAR (measured) = 1.87 W/kg 0 dB = 1.87 W/kg = 2.72 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/15 #01_WLAN2.4GHz_802.11b 1Mbps_Bottom Face_0mm_Ch6 Communication System: 802.11ac; Frequency: 5290 MHz;Duty Cycle: 1:1.111 Medium: HSL_5G_240115 Medium parameters used : f = 5290 MHz; σ = 4.776 S/m; ε r = 35.922; ρ = 1000 kg/m 3 Ambient Temperature：23.6 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7692; ConvF(5.84, 5.74, 6.7) @ 5290 MHz; Calibrated: 2023/7/18 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1311; Calibrated: 2023/9/13 - Phantom: ELI V4.0_Right; Type: QD OVA 001 BB; Serial: TP:1025 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7501) Area Scan (101x181x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 1.86 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 15.10 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 5.47 W/kg SAR(1 g) = 0.880 W/kg; SAR(10 g) = 0.156 W/kg Smallest distance from peaks to all points 3 dB below = 4 mm Ratio of SAR at M2 to SAR at M1 = 61.4% Maximum value of SAR (measured) = 2.74 W/kg 0 dB = 2.74 W/kg = 4.38 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/15 #02_WLAN5GHz_802.11ac-VHT80 MCS0_Edge 1_0mm_Ch58 0 dB = 2.29 W/kg = 3.60 dBW/kg Communication System: 802.11ac; Frequency: 5530 MHz;Duty Cycle: 1:1.111 Medium: HSL_5G_240115 Medium parameters used : f = 5530 MHz; σ = 5.008 S/m; ε r = 35.614; ρ = 1000 kg/m 3 Ambient Temperature：23.6 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7692; ConvF(5.09, 4.94, 5.73) @ 5530 MHz; Calibrated: 2023/7/18 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1311; Calibrated: 2023/9/13 - Phantom: ELI V4.0_Right; Type: QD OVA 001 BB; Serial: TP:1025 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7501) Area Scan (121x151x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 2.41 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 23.87 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 4.46 W/kg SAR(1 g) = 0.888 W/kg; SAR(10 g) = 0.257 W/kg Smallest distance from peaks to all points 3 dB below = 5.1 mm Ratio of SAR at M2 to SAR at M1 = 58.9% Maximum value of SAR (measured) = 2.29 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/15 #03_WLAN5GHz_802.11ac-VHT80 MCS0_Bottom Face_0mm_Ch106 0 dB = 2.41 W/kg = 3.82 dBW/kg Communication System: 802.11ac; Frequency: 5775 MHz;Duty Cycle: 1:1.111 Medium: HSL_5G_240115 Medium parameters used: f = 5775 MHz; σ = 5.261 S/m; ε r = 35.328; ρ = 1000 kg/m 3 Ambient Temperature：23.6 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7692; ConvF(5.23, 5.12, 5.97) @ 5775 MHz; Calibrated: 2023/7/18 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1311; Calibrated: 2023/9/13 - Phantom: ELI V4.0_Right; Type: QD OVA 001 BB; Serial: TP:1025 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7501) Area Scan (121x151x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 2.73 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 24.06 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 4.79 W/kg SAR(1 g) = 0.940 W/kg; SAR(10 g) = 0.250 W/kg Smallest distance from peaks to all points 3 dB below = 4.9 mm Ratio of SAR at M2 to SAR at M1 = 61.8% Maximum value of SAR (measured) = 2.41 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/15 #04_WLAN5GHz_802.11ac-VHT80 MCS0_Bottom Face_0mm_Ch155 0 dB = 0.268 W/kg = -11.43 dBW/kg Communication System: Bluetooth; Frequency: 2402 MHz;Duty Cycle: 1:1.64 Medium: HSL_2400_240115 Medium parameters used : f = 2402 MHz; σ = 1.753 S/m; ε r = 39.879; ρ = 1000 kg/m 3 Ambient Temperature：23.6 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7692; ConvF(7.59, 7.41, 8.57) @ 2402 MHz; Calibrated: 2023/7/18 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1311; Calibrated: 2023/9/13 - Phantom: ELI V4.0_Right; Type: QD OVA 001 BB; Serial: TP:1025 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7501) Area Scan (71x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.473 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 17.06 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0 .367 W/kg SAR(1 g) = 0.150 W/kg; SAR(10 g) = 0.064 W/kg Smallest distance from peaks to all points 3 dB below = 6.7 mm Ratio of SAR at M2 to SAR at M1 = 41% Maximum value of SAR (measured) = 0.268 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2024/1/15…

Text truncated - open the document above for the full version.

SP ORTON INTERNATIONAL INC. T EL : 886-3-327-3456 FAX : 886-3-328-4978 D2450V2, serial no. 736 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D2450V2 – serial no. 736 2450M HZ Da te of Measurement Re turn-Loss (dB) De lta (%) Re al Impedance (ohm) De lta (ohm) I maginary Impedance (ohm) De lta (ohm) 08.17.2021 (C al. Report) -24.29755.295 3.6377 08.16.2022 (ex tended) -28.76118.37 51.401 -3.8943.556 -0.0817 08.15.2023 (ex tended) -28.48317.23 51.239 -4.0563.496 -0.1417 T he return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D2450 V2, serial no. 736 (Data of Measurement : 08.16.2022) 2450 MHz - Head SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D2450V2, serial no. 736 (Data of Measurement : 08.15.2023) D2450V2 MHz - Head

TEL : 886-3-327-3456 Page 1 of 27 FAX : 886-3-328-4978 Issued Date : Mar. 18, 2024 Template version: 240125 FCC SAR TEST REPORT Report No. : FA3D2701 FCC SAR TEST REPORT FCC ID : HLZA24001 Equipment : Tablet PC Brand Name : acer Model Name : A24001 Applicant : Acer Incorporated 8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City 22181, Taiwan (R.O.C) Manufacturer : Acer Incorporated 8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City 22181, Taiwan (R.O.C) Standard : FCC 47 CFR Part 2 (2.1093) The product was received on Dec. 28, 2023 and testing was started from Jan. 15, 2024 and completed on Feb. 08, 2024. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample provide by manufacturer and the test data has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been pass the FCC requirement. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full. Sporton International Inc. EMC & Wireless Communications Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page 2 of 27 FAX : 886-3-328-4978 Issued Date : Mar. 18, 2024 Template version: 240125 FCC SAR TEST REPORT Report No. : FA3D2701 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Guidance Applied .......................................................................................................................................................... 4 3. Equipment Under Test (EUT) Information ................................................................................................................... 5 3.1 General Information ............................................................................................................................................... 5 4. RF Exposure Limits....................................................................................................................................................... 6 4.1 Uncontrolled Environment ...................................................................................................................................... 6 4.2 Controlled Environment .......................................................................................................................................... 6 5. Specific Absorption Rate (SAR) ................................................................................................................................... 7 5.1 Introduction ............................................................................................................................................................ 7 5.2 SAR Definition ........................................................................................................................................................ 7 6. System Description and Setup .................................................................................................................................... 8 6.1 Test Site Location ................................................................................................................................................... 8 6.2 E-Field Probe ......................................................................................................................................................... 9 6.3 Data Acquisition Electronics (DAE) ........................................................................................................................ 9 6.4 Phantom ................................................................................................................................................................10 6.5 Device Holder........................................................................................................................................................ 11 7. Measurement Procedures ...........................................................................................................................................12 7.1 Spatial Peak SAR Evaluation ................................................................................................................................12 7.2 Power Reference Measurement............................................................................................................................13 7.3 Area Scan .............................................................................................................................................................13 7.4 Zoom Scan ............................................................................................................................................................14 7.5 Volume Scan Procedures ......................................................................................................................................14 7.6 Power Drift Monitoring ...........................................................................................................................................14 8. Test Equipment List .....................................................................................................................................................15 9. System Verification ......................................................................................................................................................16 9.1 Tissue Verification .................................................................................................................................................16 9.2 System Performance Check Results .....................................................................................................…

Text truncated - open the document above for the full version.

ProductNumber:TLT5326-P11 ProductName:MobilePhoneAntenna 1Page1Version:1.0IssueDate:2024-03-1 SHENZHENTLTCOMMUNICATIONCO.,LTD Building1,Rooms108-109,ShanhaiScienceandInnovationPark,ZhongyuGuanAvenue,LonghuaNewDistrict,ShenzhenCity P11 antenna TheProductRecognitionLetter TheCustomer yanghua Bandrange 2.4/5.8/GPS ModelP11VersionLatestversion ProjectcodenameTLT5326Approval RFDesigner Mao Hangzhou RDDesignerTangChunzheng Dateofthis2024-3-1Dateofthis2024-3-1 CustomerInformation: ProductNumber:TLT5326-P11 ProductName:MobilePhoneAntenna 2Page1Version:1.0IssueDate:2024-03-1 Metric 1.Antennaparameters 1.1Electricalparameters 1.1.1ElectricalPerformanceAssessment 1.1.2distributioncircuitdiagram 1.2Structuralparameters 1.2.1antennaassembly 1.2.2Performancetestrequirements 2.Thetest 2.1Voltagestandingwaveratiotest 2.1.1testconnection 2.1.2voltagestandingtowaveratio 2.2Gainandpowertests 2.2.1testenvironment 2.2.2TestEquipment 3.Summary 4.Attachmentdiagram 4.1Parameterdiagramofreturnlossandvoltagestandingwaveratio 5.WIFI&GPSgraphicsandtestdata 5.1.1WIFIfieldtest 5.1.2WIFIthroughputtest 5.2Gainandefficiencytests 5.3GPSfieldtest 6.Antennaassemblyandprocessingdrawingfile 7.Antenna2Dprofile ProductNumber:TLT5326-P11 ProductName:MobilePhoneAntenna 3Page1Version:1.0IssueDate:2024-03-1 1.Antennaparameters Thisreportmainlyprovidestestconditionsandresultsforvariouselectricalandstructural propertiesindevicetests, AnantennadesignedbyTLT. Electricalparameters 1.1.1ElectricalPerformanceAssessment Thebandrangeoftheantennais2400MHz-2500MHzand5000MHz~5800MHz.belowarethe basicparametersoftheelectricalperformanceoftheantenna.Thisisdesignedantennaand producedbyTianLuTong. 1.1.2distributioncircuitdiagram UsetheoriginalmatchingcircuitdiagramonthePCBboard 1.2Structuralparameters 1.2.1antennaassembly Antennasgenerallyconsistedofplasticsupportsandhardwarepieces. 1.2.2cantesttherequirements TestitemdescriptionAcceptancecriteries 1.crytemperaturetest temperature:-20°C Time:24hours The1.hadnoobviousdamage The2.electricalperformance meetsthestandard The2.high-temperaturetest temperature.:80 °C Time:24hours The1.hadnoobviousdamage The2.electricalperformance meetsthestandard 3.saltfogtest 5±0.1%saltmist PH-value:6.5-7.2 temperature:35±1°C Time:e:24hours 1.Nocolorwaschanged 2.Therearenoobviouscracksin theappearance 4.environmentaladaptabilitytest TotalvalueofPb,Hg,Cr+6,Cd inpackingmaterialsis smallerthall50PPM Pb,Hg,Cr+6,PBBs,PBDEsin componentsaresmallerthan 500PPM,Cdissmallerthan 50PPM ProductNumber:TLT5326-P11 ProductName:MobilePhoneAntenna 4Page1Version:1.0IssueDate:2024-03-1 2.Thetest Antennaareinstalledinacustomerprovidedphonefortesting.describestheantennainmobile) fortheequipment(electricalperformancetest. 2.1TheVSWRtest Testtheconnection TestVSWRorderofdeviceconnections:AgilentE8753networkanalyzer→testcable→ customer-providedmachine 2.1.2VSWR Thetablebelowdescribesthevaluesofthevoltageresidentwaveratiooftheantennaatthe twoendpointsofthefrequencyband,involvingdrawingsaboutthereturnimpairmentandresident waveratio,pleaserefer. GAINTOEFFCIENCY 2.2.1testenvironment Skywaymicrowavedarkchamber:Thetestfrequencyrangefrom800MHzto6GHz,ina50cm diametersphericalarea,andthedarkchamberisreflectedlessthan-50dB.from800MHz—6GHz 2.2.2Testtheequipment Agilent8960((5515C)WirelessCommunicationTestDevice,Dipoleantenna,FrenchSatimo AntennaTestSystem,Printer,etc. 3.summary Theantennaisdesignedaccordingtothemachinesamplesprovidedbythecustomer,andthe electricalparametersandresultperformanceoftheantennameetthestandard,andwearesureto GPSWIFI-2.4GWIFI-5.0G Frequency(MHz)1.575G2.4G2.48G5.15G5.85G VSWR1.251.391.372.012.35 ReturnLoss-19.2-15.7-16.0-9.49-7.8 Frequency(GHz) 1.575G2.40G2.48G5.20G5.70G Gain(dBi)1.350.671.020.960.67 Efficiency(%)40.138.240.240.139.1 ProductNumber:TLT5326-P11 ProductName:MobilePhoneAntenna 5Page1Version:1.0IssueDate:2024-03-1 makeyousatisfied. 4.Attachmentdiagram 4.1Parameterdiagramofreturnlossandvoltagestandingwaveratio ProductNumber:TLT5326-P11 ProductName:MobilePhoneAntenna 6Page1Version:1.0IssueDate:2024-03-1 5.WIFI&GPSgraphicsandtestdata 5.1.1WIFIfieldtest:Testenvironment:openenvironment,15metersawayfromourrouter.Thetest isasfollows: 5.1.2WIFIthroughputtest: 2.4GRX：48.6M 2.4G-WIFIdispiay-42DBM， fullsignal 5G-WIFIdispiay-46DBM，full signal ProductNumber:TLT5326-P11 ProductName:MobilePhoneAntenna 7Page1Version:1.0IssueDate:2024-03-1 2.4GTX：52.2M 5GRX：297M 5GTX：317M ProductNumber:TLT5326-P11 ProductName:MobilePhoneAntenna 8Page1Version:1.0IssueDate:2024-03-1 5.2WIFIgainandefficiencytest: ProductNumber:TLT5326-P11 ProductName:MobilePhoneAntenna 9Page1Version:1.0IssueDate:2024-03-1 5.3GPSfieldtest：

TEL : 886-3-327-0868 Page Number : 1 of 24 FAX : 886-3-327-0855 Issue Date : Mar. 14, 2024 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR3D2701B FCC RADIO TEST REPORT FCC ID : HLZA24001 Equipment : Tablet PC Brand Name : acer Model Name : A24001 Applicant : Acer Incorporated 8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City 22181, Taiwan (R.O.C) Manufacturer : Acer Incorporated 8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City 22181, Taiwan (R.O.C) Standard : FCC Part 15 Subpart C §15.247 The product was received on Dec. 28, 2023 and testing was performed from Jan. 11, 2024 to Feb. 23, 2024. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval from Sporton International Inc. Wensan Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan (R.O.C.) TEL : 886-3-327-0868 Page Number : 2 of 24 FAX : 886-3-327-0855 Issue Date : Mar. 14, 2024 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR3D2701B Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Modification of EUT ........................................................................................................................... 6 1.3 Testing Location ................................................................................................................................ 6 1.4 Applicable Standards ......................................................................................................................... 6 2 Test Configuration of Equipment Under Test ......................................................................................... 7 2.1 Carrier Frequency Channel ............................................................................................................... 7 2.2 Test Mode .......................................................................................................................................... 8 2.3 Connection Diagram of Test System ................................................................................................. 9 2.4 Support Unit used in test configuration and system .......................................................................... 9 2.5 EUT Operation Test Setup .............................................................................................................. 10 2.6 Measurement Results Explanation Example ................................................................................... 10 3 Test Result ................................................................................................................................................ 11 3.1 6dB and 99% Bandwidth Measurement .......................................................................................... 11 3.2 Output Power Measurement ............................................................................................................ 12 3.3 Power Spectral Density Measurement ............................................................................................ 13 3.4 Conducted Band Edges and Spurious Emission Measurement ..................................................... 14 3.5 Radiated Band Edges and Spurious Emission Measurement ........................................................ 15 3.6 AC Conducted Emission Measurement........................................................................................... 19 3.7 Antenna Requirements .................................................................................................................... 21 4 List of Measuring Equipment ................................................................................................................. 22 5 Measurement Uncertainty .................…

Text truncated - open the document above for the full version.