Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-15-2023 Ref: Attestation Statements Part 2.911(d)(7) Filing [Acer Incorporated] (“the applicant”) certifies that, as of the date of the filing of the application, [Acer America Corporation] is our designated U.S. agent for service of process. [Acer Incorporated] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. [Acer America Corporation] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process. Sincerely, Designated U.S. Agent Information: Name: Acer America Corporation FRN: 0033486168 Contact Person: Young Kim Address: 1730 North First Street, Suite 400, San Jose, CA 95112 Tel.: (408) 533 7700 Email: [email protected] U.S. Agent Signature: Applicant: Company Name: Acer Incorporated Grantee Code: HLZ Contact Person: RU Jan Tel.: +886-2-8691-3289 Email: [email protected] Applicant Signature: FRN: 0013355508
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taip ei Cit y, Taiwan 221 Tel: 886-2-6606-3131 ; Fax: 886-2-2696-3535 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: September 2, 2024 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Acer Incorporated (“the applicant”) certifies that the equipment [FCC ID: HLZA24005] for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Acer Incorporated (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, ________________________ RU Jan Sr. Manager [email protected]
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taip ei Cit y, Taiwan 221 Tel: 886-2-6606-3131 ; Fax: 886-2-2696-3535 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: September 2, 2024 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Acer Incorporated (“the applicant”) certifies that the equipment [FCC ID: HLZA24005] for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Acer Incorporated (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, ________________________ RU Jan Sr. Manager [email protected]
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taip ei Cit y, Taiwan 221 Tel: 886-2-6606-3131 ; Fax: 886-2-2696-3535 September 2, 2024 Subject : KDB 905462 D0 3 Requirement for Client Devices To Whom It May Concern: We, Acer Incorporated, attest that this devic e with FCC ID: HLZA24005/ IC: 1754F- A24005 comp lies with following KDB requirements. The client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a maste r. This includes restriction on transmissions for beacons and support for ad-hoc peer-to-peer modes. __________________ RU Jan [email protected]
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taip ei Cit y, Taiwan 221 Tel: 886-2-6606-3131 ; Fax: 886-2-2696-3535 Date: September 2, 2024 FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 Subject: Request for Confidentiality FCC ID: HLZA24005 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. ⚫Block Diagram ⚫Schematic Diagram ⚫Parts List ⚫Tune-up Procedure ⚫Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. ⚫External Photos ⚫Internal Photos ⚫Test Setup Photos ⚫User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ______________________ RU Jan [email protected]
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taipei City, Taiwan 221 Tel: 886-2-6606-3131 ; Fax: 886-2-2696-3535 Date: September 2, 2024 To whom it may concern, Please be notified that I, RU Jan, have designated Sporton International Inc. as the agent being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Sporton International Inc. on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is limited to the product of as following: FCC ID: HLZA24005 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Sincerely yours, RU Jan [email protected]
Brand Name: acer Model Name: A24005 Back of EUT
Date: 2024-08-21 System Check_Head_2450MHz DUT: D2450V2 - SN929 Communication System: CW; Frequency: 2450.000 MHz Medium: HSL_2450_240821 Medium parameters used: f= 2450.000 MHz; σ= 1.83 S/m; ε r = 39.2 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY8 Configuration: - Probe: EX3DV4 - SN3728; ConvF(7.39, 7.39, 7.39); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1707; Calibrated: 2023-12-06 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2155; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 Pin=17.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 2.56 W/kg; SAR (10g) = 1.18 W/kg; Pin=17.0dBm/Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm Power Drift = 0.03 dB SAR (1g) = 2.65 W/kg; SAR (8g) = 1.35 W/kg; SAR (10g) = 1.22 W/kg Smallest distance from peaks to all points 3 dB below = 8.6 mm Ratio of SAR at M2 to SAR at M1 = 78.3 % Appendix AReport No.: FA471715 Page1/9 Date: 2024-08-28 System Check_Head_2450MHz DUT: D2450V2 - SN929 Communication System: CW; Frequency: 2450.000 MHz Medium: HSL_2450_240828 Medium parameters used: f= 2450.000 MHz; σ= 1.81 S/m; ε r = 39.1 Ambient Temperature: 23.4°C; Liquid Temperature: 22.4°C DASY8 Configuration: - Probe: EX3DV4 - SN7695; ConvF(7.34, 7.31, 8.07); Calibrated: 2024-06-04 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1424; Calibrated: 2023-12-07 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2155; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 Pin=17.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 2.38 W/kg; SAR (10g) = 1.13 W/kg; Pin=17.0dBm/Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm Power Drift = 0.02 dB SAR (1g) = 2.49 W/kg; SAR (8g) = 1.31 W/kg; SAR (10g) = 1.19 W/kg Smallest distance from peaks to all points 3 dB below = 9.0 mm Ratio of SAR at M2 to SAR at M1 = 82.1 % Appendix AReport No.: FA471715 Page2/9 Date: 2024-08-28 System Check_Head_2450MHz DUT: D2450V2 - SN929 Communication System: CW; Frequency: 2450.000 MHz Medium: HSL_2450_240828 Medium parameters used: f= 2450.000 MHz; σ= 1.82 S/m; ε r = 39.1 Ambient Temperature: 23.2°C; Liquid Temperature: 22.2°C DASY8 Configuration: - Probe: EX3DV4 - SN7791; ConvF(6.83, 7.31, 6.48); Calibrated: 2024-02-21 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn656; Calibrated: 2024-01-18 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2155; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 SAR (1g) = 2.54 W/kg; SAR (10g) = 1.15 W/kg; Power Drift = -0.05 dB SAR (1g) = 2.53 W/kg; SAR (8g) = 1.30 W/kg; SAR (10g) = 1.17 W/kg Smallest distance from peaks to all points 3 dB below = 9.0 mm Ratio of SAR at M2 to SAR at M1 = 78.8 % Pin=17.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm mm Pin=17.0dBm/Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 Appendix AReport No.: FA471715 Page3/9 Date: 2024-08-21 System Check_Head_5250MHz DUT: D5GHzV2 - SN1006 Communication System: CW; Frequency: 5250.000 MHz Medium: HSL_5G_240821 Medium parameters used: f= 5250.000 MHz; σ= 4.64 S/m; ε r = 35.7 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY8 Configuration: - Probe: EX3DV4 - SN3728; ConvF(5.1, 5.1, 5.1); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1707; Calibrated: 2023-12-06 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2155; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 Pin=17.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 3.22 W/kg; SAR (10g) = 1.01 W/kg; Pin=17.0dBm/Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.05 dB SAR (1g) = 3.92 W/kg; SAR (8g) = 1.29 W/kg; SAR (10g) = 1.10 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 66.2 % Appendix AReport No.: FA471715 Page4/9 Date: 2024-08-28 System Check_Head_5250MHz DUT: D5GHzV2 - SN1006 Communication System: CW; Frequency: 5250.000 MHz Medium: HSL_5G_240828 Medium parameters used: f= 5250.000 MHz; σ= 4.76 S/m; ε r = 37.3 Ambient Temperature: 23.4°C; Liquid Temperature: 22.4°C DASY8 Configuration: - Probe: EX3DV4 - SN7695; ConvF(5.29, 5.43, 5.87); Calibrated: 2024-06-04 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1424; Calibrated: 2023-12-07 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2155; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 Pin=20.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 6.45 W/kg; SAR (10g) = 2.06 W/kg; Pin=20.0dBm/Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.02 dB SAR (1g) = 7.81 W/kg; SAR (8g) = 2.69 W/kg; SAR (10g) = 2.32 W/kg Smallest distance from peaks to all points 3 dB below = 7.3 mm Ratio of SAR at M2 to SAR at M1 = 67.0 % Appendix AReport No.: FA471715 Page5/9 Date: 2024-08-21 System Check_Head_5600MHz DUT: D5GHzV2 - SN1006 Communication System: CW; Frequency: 5600.000 MHz Medium: HSL_5G_240821 Medium parameters used: f= 5600.000 MHz; σ= 5.04 S/m; ε r = 35.1 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY8 Configuration: - Probe: EX3DV4 - SN3728; ConvF(4.3, 4.3, 4.3); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1707; Calibrated: 2023-12-06 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2155; Section: Flat - Measurement Software: 16.2.4.2524 - UID: CW, 0 Pin=17.0dBm/Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 3.94 W/kg; SAR (10g) = 1.19 W/kg; Pin=17.0dBm/Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.00 dB SAR (1g) = 4.63 W/kg; SAR (8g) = 1.51 W/kg; SAR (10g) = 1.29 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 63.2 % Appendix AReport No.: FA471715 Page6/9 Date: 2024-08-28 Syst…
Text truncated - open the document above for the full version.
Communication System: IEEE 802.11b WiFi 2.4 GHz ; Frequency: 2412.000 MHz Medium: HSL_2450_240828 Medium parameters used: f= 2412.000 MHz; σ= 1.80 S/m; ε r = 39.5 Ambient Temperature: 23.4°C; Liquid Temperature: 22.4°C DASY8 Configuration: - Probe: EX3DV4 - SN7695; ConvF(7.34, 7.31, 8.07); Calibrated: 2024-06-04 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1424; Calibrated: 2023-12-07 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2155; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10415-AAA Area Scan (80.0 mm x 120.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 1.06 W/kg; SAR (10g) = 0.418 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm Power Drift = -0.07 dB SAR (1g) = 1.06 W/kg; SAR (8g) = 0.465 W/kg; SAR (10g) = 0.413 W/kg Smallest distance from peaks to all points 3 dB below = 6.8 mm Ratio of SAR at M2 to SAR at M1 = 80.9 % Date: 2024-08-28 #01_WLAN2.4GHz_802.11b 1Mbps_Bottom Face_0mm_Ch1 Appendix BReport No.: FA471715 Page1/5 Communication System: IEEE 802.11n; Frequency: 5270.000 MHz Medium: HSL_5G_240821 Medium parameters used: f= 5270.000 MHz; σ= 4.66 S/m; ε r = 35.6 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY8 Configuration: - Probe: EX3DV4 - SN3728; ConvF(5.1, 5.1, 5.1); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1707; Calibrated: 2023-12-06 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2155; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10599-AAD Area Scan (60.0 mm x 160.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 0.528 W/kg; SAR (10g) = 0.150 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 4.0 mm x 4.0 mm x 1.4 mm Power Drift = 0.09 dB SAR (1g) = 0.760 W/kg; SAR (8g) = 0.186 W/kg; SAR (10g) = 0.151 W/kg Smallest distance from peaks to all points 3 dB below = 4.8 mm Ratio of SAR at M2 to SAR at M1 = 67.5 % Date: 2024-08-21 #02_WLAN5GHz_802.11n-HT40 MCS0_Edge 1_0mm_Ch54 Appendix BReport No.: FA471715 Page2/5 Communication System: IEEE 802.11ac WiFi; Frequency: 5530.000 MHz Medium: HSL_5G_240821 Medium parameters used: f= 5530.000 MHz; σ= 4.96 S/m; ε r = 35.2 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY8 Configuration: - Probe: EX3DV4 - SN3728; ConvF(4.3, 4.3, 4.3); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1707; Calibrated: 2023-12-06 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2155; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10626-AAD Area Scan (60.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 0.902 W/kg; SAR (10g) = 0.261 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 2.9 mm x 2.9 mm x 1.2 mm Power Drift = 0.10 dB SAR (1g) = 0.866 W/kg; SAR (8g) = 0.264 W/kg; SAR (10g) = 0.227 W/kg Smallest distance from peaks to all points 3 dB below = 4.2 mm Ratio of SAR at M2 to SAR at M1 = 62.6 % Date: 2024-08-21 #03_WLAN5GHz_802.11ac-VHT80 MCS0_Bottom Face _0mm_Ch106 Appendix BReport No.: FA471715 Page3/5 Communication System: IEEE 802.11n; Frequency: 5755.000 MHz Medium: HSL_5G_240821 Medium parameters used: f= 5755.000 MHz; σ= 5.22 S/m; ε r = 34.7 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY8 Configuration: - Probe: EX3DV4 - SN3728; ConvF(4.46, 4.46, 4.46); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1707; Calibrated: 2023-12-06 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2155; Section: Flat - Measurement Software: 16.2.4.2524 - UID: WLAN, 10599-AAD Area Scan (60.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 0.818 W/kg; SAR (10g) = 0.232 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 2.9 mm x 2.9 mm x 1.2 mm Power Drift = 0.02 dB SAR (1g) = 0.803 W/kg; SAR (8g) = 0.229 W/kg; SAR (10g) = 0.195 W/kg Smallest distance from peaks to all points 3 dB below = 5.0 mm Ratio of SAR at M2 to SAR at M1 = 61.5 % Date: 2024-08-21 #04_WLAN5GHz_802.11n-HT40 MCS0_Bottom Face_0mm_Ch151 Appendix BReport No.: FA471715 Page4/5 Communication System: IEEE 802.15.1 Bluetooth; Frequency: 2480.000 MHz Medium: HSL_2450_240821 Medium parameters used: f= 2480.000 MHz; σ= 1.86 S/m; ε r = 39.1 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY8 Configuration: - Probe: EX3DV4 - SN3728; ConvF(7.39, 7.39, 7.39); Calibrated: 2024-03-20 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1707; Calibrated: 2023-12-06 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2155_for 0mm; Section: Flat - Measurement Software: 16.2.4.2524 - UID: Bluetooth, 10032-CAA Area Scan (60.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 0.664 W/kg; SAR (10g) = 0.265 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 4.5 mm x 4.5 mm x 1.5 mm Power Drift = 0.02 dB SAR (1g) = 0.657 W/kg; SAR (8g) = 0.279 W/kg; SAR (10g) = 0.247 W/kg Smallest distance from peaks to all points 3 dB below = 5.5 mm Ratio of SAR at M2 to SAR at M1 = 71.0 % Date: 2024-08-21 #05_Bluetooth_1Mbps_Bottom Face _0mm_Ch78 Appendix BReport No.: FA471715 Page5/5
Appendix CReport No.: FA471715 Page1/111 Appendix CReport No.: FA471715 Page2/111 Appendix CReport No.: FA471715 Page3/111 Appendix CReport No.: FA471715 Page4/111 Appendix CReport No.: FA471715 Page5/111 Appendix CReport No.: FA471715 Page6/111 Appendix CReport No.: FA471715 Page7/111 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D2450V2, serial no. 929 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D2450V2 – serial no. 929 2450MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 11.21.2022 (Cal. Report) -25.5 52.9 4.7 11.20.2023 (extended) -25.9 1.57 52.3 -0.6 4.8 0.1 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Appendix CReport No.: FA471715 Page8/111 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D2450 V2, serial no. 929 (Data of Measurement : 11.20.2023) 2450MHz - Head Appendix CReport No.: FA471715 Page9/111 Appendix CReport No.: FA471715 Page10/111 Appendix CReport No.: FA471715 Page11/111 Appendix CReport No.: FA471715 Page12/111 Appendix CReport No.: FA471715 Page13/111 Appendix CReport No.: FA471715 Page14/111 Appendix CReport No.: FA471715 Page15/111 Appendix CReport No.: FA471715 Page16/111 Appendix CReport No.: FA471715 Page17/111 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D5000V2, serial no. 1006 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D5000V2 – serial no. 1006 5250MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 05.25.2023 (Cal. Report) -21.6 54.4 -7.5 05.24.2024 (extended) -19.7 -8.80 53.1 -1.3 -10.0 -2.5 5600MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 05.25.2023 (Cal. Report) -20.5 57.1 -7.3 05.24.2024 (extended) -22.9 11.71 55.0 -2.1 -6.0 1.3 5750MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 05.25.2023 (Cal. Report) -20.8 59.1 4.1 05.24.2024 (extended) -21.2 1.92 59.6 0.5 0.5 -3.6 5850MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 05.25.2023 (Cal. Report) -31.4 52.7 0.8 05.24.2024 (extended) -27.7 -11.78 55.4 2.7 0.1 -0.7 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Appendix CReport No.: FA471715 Page18/111 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D5000 V2, serial no. 1006 (Data of Measurement : 05.24.2024) 5000MHz - Head Appendix CReport No.: FA471715 Page19/111 Appendix CReport No.: FA471715 Page20/111 Appendix CReport No.: FA471715 Page21/111 Appendix CReport No.: FA471715 Page22/111 Appendix CReport No.: FA471715 Page23/111 Appendix CReport No.: FA471715 Page24/111 Appendix CReport No.: FA471715 Page25/111 Appendix CReport No.: FA471715 Page26/111 Appendix CReport No.: FA471715 Page27/111 Appendix CReport No.: FA471715 Page28/111 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D5000V2, serial no. 1128 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D5000V2 – serial no. 1128 5200MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 02.22.2023 (Cal. Report) -21.9 48.7 -7.9 02.21.2024 (extended) -21.9 0 48.9 0.2 -7.3 0.6 5800MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 02.22.2023 (Cal. Report) -28.0 49.4 -3.9 02.21.2024 (extended) -23.8 -15 53.0 3.6 -4.5 -0.6 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Appendix CReport No.: FA471715 Page29/111 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D5000 V2, serial no. 1128 (Data of Measurement : 02.21.2024) 5000MHz - Head Appendix CReport No.: FA471715 Page30/111 Appendix CReport No.: FA471715 Page31/111 Appendix CReport No.: FA471715 Page32/111 Appendix CReport No.: FA471715 Page33/111 Appendix CReport No.: FA471715 Page34/111 Appendix CReport No.: FA471715 Page35/111 Appendix CReport No.: FA471715 Page36/111 Appendix CReport No.: FA471715 Page37/111 Appendix CReport No.: FA471715 Page38/111 Appendix CReport No.: FA471715 Page39/111 Appendix CReport No.: FA471715 Page40/111 Appendix CReport No.: FA471715 Page41/111 Appendix CReport No.: FA471715 Page42/111 Appendix CReport No.: FA471715 Page43/111 Appendix CReport No.: FA471715 Page44/111 Appendix CReport No.: FA471715 Page45/111 Appendix CReport No.: FA471715 Page46/111 Appendix CReport No.: FA471715 Page47/111 Appendix CReport No.: FA471715 Page48/111 Appendix CReport No.: FA471715 Page49/111 Appendix CReport No.: FA471715 Page50/111
Appendix CReport No.: FA471715 Page57/111 Appendix CReport No.: FA471715 Page58/111 Appendix CReport No.: FA471715 Page59/111 Appendix CReport No.: FA471715 Page60/111 Appendix CReport No.: FA471715 Page61/111 Appendix CReport No.: FA471715 Page62/111 Appendix CReport No.: FA471715 Page63/111 Appendix CReport No.: FA471715 Page64/111 Appendix CReport No.: FA471715 Page65/111 Appendix CReport No.: FA471715 Page66/111 Appendix CReport No.: FA471715 Page67/111 Appendix CReport No.: FA471715 Page68/111 Appendix CReport No.: FA471715 Page69/111 Appendix CReport No.: FA471715 Page70/111 Appendix CReport No.: FA471715 Page71/111 Appendix CReport No.: FA471715 Page72/111 Appendix CReport No.: FA471715 Page73/111 Appendix CReport No.: FA471715 Page74/111 Appendix CReport No.: FA471715 Page75/111 Appendix CReport No.: FA471715 Page76/111 Appendix CReport No.: FA471715 Page77/111 Appendix CReport No.: FA471715 Page78/111 Appendix CReport No.: FA471715 Page79/111 Appendix CReport No.: FA471715 Page80/111 Appendix CReport No.: FA471715 Page81/111 Appendix CReport No.: FA471715 Page82/111 Appendix CReport No.: FA471715 Page83/111 Appendix CReport No.: FA471715 Page84/111 Appendix CReport No.: FA471715 Page85/111 Appendix CReport No.: FA471715 Page86/111 Appendix CReport No.: FA471715 Page87/111 Appendix CReport No.: FA471715 Page88/111 Appendix CReport No.: FA471715 Page89/111 Appendix CReport No.: FA471715 Page90/111 Appendix CReport No.: FA471715 Page91/111 Appendix CReport No.: FA471715 Page92/111 Appendix CReport No.: FA471715 Page93/111 Appendix CReport No.: FA471715 Page94/111 Appendix CReport No.: FA471715 Page95/111 Appendix CReport No.: FA471715 Page96/111 Appendix CReport No.: FA471715 Page97/111 Appendix CReport No.: FA471715 Page98/111 Appendix CReport No.: FA471715 Page99/111 Appendix CReport No.: FA471715 Page100/111 Appendix CReport No.: FA471715 Page101/111 Appendix CReport No.: FA471715 Page102/111 Appendix CReport No.: FA471715 Page103/111 Appendix CReport No.: FA471715 Page104/111 Appendix CReport No.: FA471715 Page105/111 Appendix CReport No.: FA471715 Page106/111
TEL : 886-3-327-3456 Page 1 of 29 FAX : 886-3-328-4978 Issued Date : Sep. 09, 2024 Template version: 240125 FCC SAR TEST REPORT Report No. : FA471715 FCC SAR TEST REPORT FCC ID : 1754F-A24005 Equipment : Tablet PC Brand Name : acer Model Name : A24005 Applicant : Acer Incorporated 8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City 22181, Taiwan (R.O.C) Manufacturer : Acer Incorporated 8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City 22181, Taiwan (R.O.C) Standard : FCC 47 CFR Part 2 (2.1093) The product was received on Jul. 18, 2024 and testing was started from Aug. 21, 2024 and completed on Aug. 28, 2024. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample provide by manufacturer and the test data has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been pass the FCC requirement. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full. Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page 2 of 29 FAX : 886-3-328-4978 Issued Date : Sep. 09, 2024 Template version: 240125 FCC SAR TEST REPORT Report No. : FA471715 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Guidance Applied .......................................................................................................................................................... 4 3. Equipment Under Test (EUT) Information ................................................................................................................... 5 3.1 General Information ............................................................................................................................................... 5 4. RF Exposure Limits....................................................................................................................................................... 6 4.1 Uncontrolled Environment ...................................................................................................................................... 6 4.2 Controlled Environment .......................................................................................................................................... 6 4.3 RF Exposure limit for above 6GHz ......................................................................................................................... 7 5. Specific Absorption Rate (SAR) ................................................................................................................................... 8 5.1 Introduction ............................................................................................................................................................ 8 5.2 SAR Definition ........................................................................................................................................................ 8 6. System Description and Setup .................................................................................................................................... 9 6.1 Test Site Location ................................................................................................................................................... 9 6.2 E-Field Probe ........................................................................................................................................................10 6.3 Data Acquisition Electronics (DAE) .......................................................................................................................10 6.4 Phantom ................................................................................................................................................................ 11 6.5 Device Holder.........…
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 2 | 15C | 2.41 GHz - 2.46 GHz | 14.50 mW |
Tablet PC
Equipment Class
DTS - Digital Transmission SystemTablet PC
Equipment Class
6XD - 15E 6 GHz Low Power Indoor ClientAcer Wireless Mouse
Equipment Class
DTS - Digital Transmission SystemGaming sound bar
Equipment Class
DSS - Part 15 Spread Spectrum TransmitterTablet PC
Equipment Class
NII - Unlicensed National Information Infrastructure TX