HLZN300PDA with WLAN and Bluetooth

Users’ Manual Product Name PDA with wireless LAN 802.11b and Bluetooth Model n300 ( Brand: acer) Acer Incorporated COPYRIGHT Copyright © 2005 Acer Inc. or its subsidiaries All Rights Reserved. Printed in Taiwan. Acer n300 Handheld User’s Guide Original issue: September 2005 Acer and the Acer logo are registered trademarks of Acer Inc. Microsoft, ActiveSync, Outlook, Pocket Outlook, Windows, Windows NT, and the Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft products are licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation. Other company’s product names or trademarks are used herein for identification purpose only and belong to their respective companies. Changes may be made periodically to the information in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this User’s Guide or supplementary documents and publications. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of Acer Inc. DISCLAIMER AND LIMITATION OF LIABILITY Acer and its subsidiaries makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Acer and its subsidiaries assume no responsibility for any damage or loss resulting from the use of this Acer n300 Handheld User’s Guide. NOTES Record the serial number, purchase date, and place of purchase information in the space provided below. The serial number is recorded on the label affixed to your Acer n300. All correspondence concerning your unit should include the serial number, and purchase information. Acer n300 Handheld S/N: _______________________________________ Purchase Date: ____________________________ Place of Purchase: _________________________ Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices) any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. . he maximum reported SAR values are: Body: 0.201 W/kg Disposal instructions iii Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. USA For electronic products containing an LCD/CRT monitor or display: Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org . For lamp-specific disposal information, check www.lamprecycle.org. About this User’s Guide Disposal instructions iv About this User’s Guide Welcome to the Acer n300 Handheld User’s Guide. This User’s Guide is designed to help you get up and running quickly with your new Acer n300—a Microsoft ® Windows Mobile TM Version 5.0 Software for Pocket PC handheld. It describes all you need to know about how to use your handheld as well as the application programs that come with it. This User’s Guide will discuss the following topics: • A tour of the Acer n300 system • Setup and maintenance procedures • Taking advantage of your handheld’s expansion features • Synchronizing data between your handheld and your computer • Connecting your handheld to a computer, a network, or the Internet • Personalizing your handheld with your own preference settings This User’s Guide introduces you to the many ways your Acer n300 can help you organize and manage both business and personal information to make your everyday activities a more productive and satisfying experience. First things first Your guides v First things first We would like to thank you for making Acer n300 your choice for your handheld needs. Your new sleek Acer n300 is a multi-functional tool packed with user-friendly features and high-performance applications designed to make organizing work- related inf…

Text truncated - open the document above for the full version.

Specification Number : JEBMM0-0058 Messrs. LITE-ON Technology Corp. Approval Sheet for Product Specification Issued Date : 15/Nov/2004 Product Description : BlueModule TM Customer Part Number : Murata Part Number : LBMA477BK2-064 Date : Company : Dept. : Approved by Signature : Type : The duplicate of this specification shall be returned to us with your authorised signiture. Unless it reaches us by 27/December/2004, it shall be mutually understood that this specification has been duly approved by you. Prepared by (signature) Keisuke Katabuchi (type) Approved by (signature) Norio Nakajima (type) Manager Product Engineering Section I Multilayer Products Department Component Division III Murata Manufacturing Co., Ltd. Specification Number : JEBMM0-0058 P.1/20 Murata Manufacturing Co., Ltd. 1. Scope This specification is applied to the Bluetooth HCI module (Blue Module TM ). 2. Part Number Production Part NumberLBMA477BK2-064 3. Rating Ratings MinMaxUnit Operating Temperature-20+70deg.C Storage Temperature-40+85deg.C Terminal NameMinMaxUnit BTRF_REG2.2V BTL_REG2.2V Supply Voltage V_I_O4.1V Input Terminal VoltageVss-0.3VDD+0.3V 4. Weight (Nominal) 0.3g Specification Number : JEBMM0-0058 P.2/20 Murata Manufacturing Co., Ltd. 5. CONSTRUCTION, DIMENSIONS and Terminal Configurations MarkDimensionMarkDimensionMarkDimension L 7.5±0.2 W 7.5±0.2 T1.4 max a1 0.4±0.2 a2 0.4±0.2 b1 0.75±0.2 b2 1.1±0.2 c1 0.6±0.2 c2 0.6±0.2 c3 4.9±0.2 c4 4.9±0.2 d1 0.75±0.2 d2 0.75±0.2 p1 0.7±0.2 p2 0.7±0.2 (Unit: mm) <SIDE VIEW> T <SIDE VIEW> (18) (19) (20) (21) (22) (23) (24) (25) (26) (27) (29) (30) (31) (32) (33) (34) (1)(2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (15) (16) (17) (14) <BOTTOME VIEW> (28) c4 c3 c1 c2 b1 p1 b2 a2 p2 a1 (35) d2 d1 (17) W Pin 1 index <TOP VIEW> L (1)(1)(9) (10) (18)(26) (27) (34) Lot Number BK Specification Number : JEBMM0-0058 P.3/20 Murata Manufacturing Co., Ltd. Terminal Configurations Terminal No. Terminal NamePin TypeDescription (1)GROUNDI- (2)NC-- (3)NC-- (4)NC-- (5)BLUE_TXI<UART_RXD> UART data input active high (6)REG_CTRLIInternal 1.8V regulator enable signal (7)EEPROM_CLKOClock interface to an optional serial EEPROM (8)NC- (9)BLUE_HOST_WAKEOHOST_WAKE signal for power control (10)V_I_OI- (11)BLUE_WAKEIActive high or active low BT_WAKE signal for powe control (12)LPO_INI32.768KHz digital clock input (13)BLUE_CLK_ENO- (14)GROUNDI- (15)XTAL_OUTOCrystal Oscillator output (16)XTAL_INICrystal or frequency reference input (17)GROUNDI- (18)TM0ITest Mode 0 (19)TM1_2ITest mode 1 and 2 (20)TM3ITest mode 3 (21)BTRF_REGI- (22)RESET_NIActive LOW system reset (23)TX_PU_TDD_NOComplement of TX_PU_TDD (24)GROUNDI- (25)ANTENNA_MATCHI/O<Ant> RF input/output (26)GROUNDI- (27)ASAP_CLKI/O<PCM_CLK> Synchronous data clock (28)ASAP_FSI/O<PCM_SYNC> Synchronous data sync (29)BLUE_CTSI<UART_CTS> UART clear to send active low (30)ASAP_RXO<PCM_OUT> Synchronous data output (31)BLUE_RTSO<UART_RTS> UART request to send active low (32)ASAP_TXI<PCM_IN> Synchronous data input (33)BLUE_RXO<UART_TXD> UART data output active high (34)BTL_REGI- (35)GROUNDI- Specification Number : JEBMM0-0058 P.4/20 Murata Manufacturing Co., Ltd. 6. Electrical Characteristics 6-1 Operating Conditions MinTypMaxUnit Operating Temperature-20+25+70deg.C Supply Voltage BTRF_REG, BTL_REG V_I_O 1.71 1.71 1.8 2.8 1.98 3.63 V V 6-2-1 Characteristics +25degC,BTRF_REG/BTL_REG=1.8V, VIO=2.75V ItemsContents Bluetooth specificationVer 1.2 Channel spacing1MHz Number of RF channel79 Power class2 Operation mode(Rx/Tx)Time division multiplex either transmit or receive Frequency hopping after one Rx/Tx cycle ItemsMinTypMaxUnit 1.Current Consumption RF Register x57=xC6 1.1 BTRF_REG_IDC_max DH5; 100% slot utilization; 50% Rx/Tx slot duty cycle 75 mA 1.3 V_I_O_REG_IDC_max DH5; 100% slot utilization; 50% Rx/Tx slot duty cycle 10mA -TX characteristics-MinTypMaxUnit 2.Output Power-44dBm 3.Frequency range（Rx/Tx）2400.5～2483.5MHz 4.-20dB bandwidth1MHz 5.Adjacent Channel Power *1 5.1 [M-N]＝2 -21dBm 5.2 [M-N]≧3 -41dBm 6.Modulation characteristics 6.1 Modulation δf1avg 145173kHz 6.2 Modulation δf2max 125kHz 6.3 Modulationδf2avg/δf1avg 0.85 7.Initial Carrier Frequency Tolerance-4545kHz 8.Carrier Frequency Drift 8.1 1slot-2525kHz 8.2 3slot-4040kHz 8.3 5slot-4040kHz 8.4 Maximum drift rate-2020 kHz/50μs 9.Out-of-Band Spurious Emissions 9.1 30-1000MHz (Operation Mode)-36dBm 9.2 1000-12750MHz (Operation Mode)-30dBm 9.3 1800-1900MHz(Operation Mode) -47 dBm 9.4 2110-2170MHz (Operation Mode)-75dBm 9.5 5150-5300MHz (Operation Mode) -47 dBm Specification Number : JEBMM0-0058 P.5/20 Murata Manufacturing Co., Ltd. -RX characteristics-mintypmaxunit 10.Sensitivity (BER≦0.1%) 10.1 2402MHz-79dBm 10.2 2441MHz-79dBm 10.3 2480MHz-79dBm 11.C/I Performance (BER≦0.1%) *2 11.1 co-channel ratio (-60dBm input)11dBm 11.2 1MHz ratio (-60dBm input)0dBm 11.3 2MHz ratio (-60dBm input)-30dBm 11.4 3MHz ratio (-67dBm input)-40dBm 11.5 image ratio (-67dBm input)-9dBm 11.6 image +/- 1MHz ratio (-67dBm input)-20dBm 12.Blocking performance(BER<0.1%) *3 12.1 30MHz-2000MHz -10 dBm 12.2 2000MHz-2400MHz-27dBm 12.3 2500MHz-3000MHz -27 dBm 12.4 3000MHz-12750MHz-10dBm 13.Intermodulation performance (BER≦0.1%, -64dBm input) -35dBm 14.Maximum Input Level-20dBm *1 Up to three sprious responses within Bluetooth limits are allowed. *2 Up to five sprious responses within Bluetooth limits are allowed. *3 Up to twenty-four sprious responses within Bluetooth limits are allowed. Specification Number : JEBMM0-0058 P.6/20 Murata Manufacturing Co., Ltd. 6-2-2. Extreme condition : -20 to +70degC, BTRF_REG/BTL_REG=1.71-1.98V, VIO=1.71-3.63V ItemsMinTypMaxUnit 1.Current Consumption RF Register x57=xC6 1.1 BTRF_REG_IDC_max DH5; 100% slot utilization; 50% Rx/Tx slot duty cycle 80 mA 1.3 V_I_O_REG_IDC_max DH5; 100% slot utilization; 50% Rx/Tx slot duty cycle 12mA -TX characteristics-MinTypMaxUnit 2.Output Power-6+6dBm 3.Frequency range（Rx/Tx）2400.5～2483.5MHz 4.-20dB bandwidth1MHz 5.Adjacent Channel Power *1 5.1 [M-N]＝2 -20d…

Text truncated - open the document above for the full version.

Data Sheet Doc no: BB-WLAN2455-01 Version 0.4 Date: 05.25.2005 Page : 1 / 17 © Copyright Samsung Electro-Mechanics. All rights reserved. DATE OF ISSUE : 05 / 25 / 2005 DATA SHEET RF Division WLAN R&D G. WRITTEN CHECKED APPROVED Jeonho Lee Yong-Min Jung Eon Hwang CUSTOMER PRODUCT NAME Embedded Wireless LAN Module MODEL NAME SWL-2455C, SWL-2455SD Part Number ISSUED BY CHECKED BY APPROVED BY Head Office & Sales Dept. 314, Maetan-3Dong, Yeongtong-Gu Suwon, Kyunggi-Do, Korea TEL : +82 (0)31 210 6903 FAX : +82 (0)31 300 7900 Homepage : http://www.sem.samsung.com Data Sheet Doc no: BB-WLAN2455-01 Version 0.4 Date: 05.25.2005 Page : 2 / 17 © Copyright Samsung Electro-Mechanics. All rights reserved. Contents 0Document ........................................................................................................................... 3 0.1Declaration......................................................................................................................................3 0.2 Revision History .............................................................................................................................3 1Specification for WLAN CF Embedded Module .............................................................. 4 1.1Identification...................................................................................................................................4 1.2 Hardware Specification .................................................................................................................4 1.2.1Card standard............................................................................................................................ 4 1.2.2 RF Characteristics ..................................................................................................................... 4 1.2.3 Mechanical Specifications ......................................................................................................... 5 1.2.4 Recommended PCB Pad Design (Top View)............................................................................ 6 1.2.5 Regulation ................................................................................................................................. 7 1.2.6 Environmental requirements .....................................................................................................7 2Software specifications .................................................................................................... 8 2.1OS Support & Driver.....................................................................................................................8 2.1.1Available drivers ........................................................................................................................ 8 2.2Security............................................................................................................................................8 2.3Utility ...............................................................................................................................................8 2.4Other Feature .................................................................................................................................8 3RF Test Results .................................................................................................................9 4 Packing Information........................................................................................................ 10 Appendix 1. Pin description................................................................................................ 13 Appendix 2. Block Diagram ................................................................................................ 16 Appendix 3. Reliability test conditions.............................................................................. 17 Data Sheet Doc no: BB-WLAN2455-01 Version 0.4 Date: 05.25.2005 Page : 3 / 17 © Copyright Samsung Electro-Mechanics. All rights reserved. 0 Document 0.1 Declaration This specification is intended for Samsung 11Mbps embedded wireless LAN module. 0.2 Revision History 08/12/2004 Created 03/24/2005 updated Operating Voltage Page 4 updated Recommended pad design Page 6 updated S/W Drivers Page 8 updated Pin Map Page10 04/20/2005 updated Interface Standard Page 4 updated Current consumption Page 4 updated Recommended pad design Page 6 updated Packing Information Page 10~12 updated Interface mode configuration Page 14 04/20/2005 updated Current consumption, RF test results Page 4,9 05/25/2005 updated Pin description and Reliability test conditions Page 13~17 Data Sheet Doc no: BB-WLAN2455-01 Version 0.4 Date: 05.25.2005 Page : 4 / 17 © Copyright Samsung Electro-Mechanics. All rights reserved. 1 Specification for WLAN CF Embedded Module 1.1 Identification 1.Samsung Product name 11Mbps WLAN CF/SDIO Embedded Module 2.Samsung Model name SWL-2455C, SWL-2455SD 3.Samsung Part number TBD 1.2 Hardware Specification 1.2.1 Card standard 1. Interface Standard Compact Flash Specification electrically compliant (SWL-2455C) SDIO Specification electrically compliant (SWL-2455SD) 2. Form Factor Customized Size 3. Operating Voltage VCC : 3.0V ~ 3.3V VCCD : 1.8V ~ 3.3V VDDSHI : 1.8V ~ 3.3V ± 5% 1.2.2 RF Characteristics RF Characteristics Min Typ Max Notes 1. Specification Compliance IEEE 802.11b standard protocol (CSMA/CA) 2. Antenna External single antenna support 3. Frequency Range2.412Ghz~2.484Ghz 4. TX output power 16dBm (40mW) 5. Current Consumption -Transmit:465mA -Receive:200mA -Standby:1mA Continuous Transmit 6. RX sensitivity - 85dBm Note : Sensitivity is based upon 1024 Bytes frame length, 11 Mbps data rate, 8% PER Data Sheet Doc no: BB-WLAN2455-01 Version 0.4 Date: 05.25.2005 Page : 5 / 17 © Copyright Samsung Electro-Mechanics. All rights reserved. 1.2.3 Mechanical Specifications 1. Dimension 15151.7 2. Weight 1g 3. Pin outs 52pin + 8 GND pattern SMT Type 4. Antenna Connector SMT pads (Pin No…

Text truncated - open the document above for the full version.

Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan, R.O.C. Tel : 886-2-2696-1234 Fax : 886-2-2696-3535 www.acer.com Letter Of Agency Date:Oct. 26th, 2005 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Please be advised that Acer Incorporated authorizes International Standards Laboratory (ISL) to act on our behalf, until otherwise notified, for applications submitted to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party as defined in 47 CFR 1.2002(b), for this application is subject to denial of federal benefits that includes FCC benefits. Thank you for your attention to this matter. ________________ Easy Lai / Director Acer Incorporated No. 65, Ku Dai Keng St., Hsichih, Taipei 221, R.O. C. Tel: 886-2-2646-2550 FAX: 886-2-26464641 No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan, R.O.C. Tel: 886-3-407-1718 FAX:886-3-407-1738 Rev 2 C:\tmp\05LR029 N300\FCC\AP FORM.doc 02/08/02 Date: Oct. 26 th , 2005 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Application Information FCC ID: HLZN300 Model: n300 Dear Sir, We would like to apply for FCC Certification on the subject model (EUT). The EUT is a PDA with wireless LAN 802.11b and Bluetooth . We have uploaded the related document for the EUT onto your website. Please review the information we submitted and issue us a grant for the subject model. If you have any comments, please do not hesitate to contact us. Thank you for your attention to these matters. Sincerely, ___________________________ Eddy Hsiung / Director International Standards Laboratory No. 65, Ku Dai Keng St., Hsichih, Taipei 221, R.O. C. Tel: 886-2-2646-2550 FAX: 886-2-26464641 No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan, R.O.C. Tel: 886-3-407-1718 FAX:886-3-407-1738 Rev 2 C:\tmp\05LR029 N300\FCC\AP FORM.doc 02/08/02 FCC Labeling Requirements and Information Date: Oct. 26 th , 2005 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Application Information FCC ID: HLZN300 Model: n300 The following label information is required by the FCC Rules and Regulations for certified devices. Please find marketing information required by the FCC Rules and Regulations as following: Label Requirements An intentional radiator device subject to certification by the FCC shall carry a warning label which includes the following statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The sample label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. FCC ID: HLZN300 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Thank you for your attention to these matters. Sincerely, ___________________________ Eddy Hsiung / Director International Standards Laboratory No. 65, Ku Dai Keng St., Hsichih, Taipei 221, R.O. C. Tel: 886-2-2646-2550 FAX: 886-2-26464641 No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan, R.O.C. Tel: 886-3-407-1718 FAX:886-3-407-1738 Rev 2 C:\tmp\05LR029 N300\FCC\AP FORM.doc 02/08/02 Request for Confidentiality Date: Oct. 26 th , 2005 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Application Information FCC ID: HLZN300 Model: n300 Please be advised that the following information is to be held confidential on behalf of Acer Inc. : ‰ Block Diagram ‰ Schematics ‰ Technical Spec The application contains technical information which Acer Inc. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, ___________________________ Eddy Hsiung / Director International Standards Laboratory Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan, R.O.C. Tel : 886-2-2696-1234 Fax : 886-2-2696-3535 www.acer.com Attn: Director of Certification Authority to Act as Agent I appoint International Standards Laboratory to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by American TCB, still resides with Acer Incorporated and address: 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien, Taiwan, R. O. C. Dated this Oct. 26 th , 2005 Agency Agreement Expiration Date: Oct. 25 th , 2006(Typically 8-12 months) By: __________________________ Esay Lai . (Signature) (Print name) Title: Director Company: Acer Incorporated (Company Name) Telephone: 886-26961234 ‰ No. 65, Ku Dai Keng St., Hsichih, Taipei 221, R.O. C. Tel: 886-2-2646-2550 FAX: 886-2-26464641 ‰ No. …

Text truncated - open the document above for the full version.

International Standards Laboratory Report Number: ISL-05LR029P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354;NEMKO:ELA 113a,113c;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178 LT LAB:NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113b,113d;BSMI:SL2-IN-E-0013;CNLA:0997 -1- EUT-1. International Standards Laboratory Report Number: ISL-05LR029P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354;NEMKO:ELA 113a,113c;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178 LT LAB:NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113b,113d;BSMI:SL2-IN-E-0013;CNLA:0997 -2- EUT-2.

Label & Location Label

International Standards Laboratory Report Number: ISL-05LR029P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354;NEMKO:ELA 113a,113c;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178 LT LAB:NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113b,113d;BSMI:SL2-IN-E-0013;CNLA:0997 -3- EUT-3. International Standards Laboratory Report Number: ISL-05LR029P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354;NEMKO:ELA 113a,113c;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178 LT LAB:NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113b,113d;BSMI:SL2-IN-E-0013;CNLA:0997 -4- EUT-4. International Standards Laboratory Report Number: ISL-05LR029P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354;NEMKO:ELA 113a,113c;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178 LT LAB:NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113b,113d;BSMI:SL2-IN-E-0013;CNLA:0997 -5- EUT-5. International Standards Laboratory Report Number: ISL-05LR029P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354;NEMKO:ELA 113a,113c;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178 LT LAB:NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113b,113d;BSMI:SL2-IN-E-0013;CNLA:0997 -6- EUT-6. International Standards Laboratory Report Number: ISL-05LR029P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354;NEMKO:ELA 113a,113c;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178 LT LAB:NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113b,113d;BSMI:SL2-IN-E-0013;CNLA:0997 -7- EUT-7. International Standards Laboratory Report Number: ISL-05LR029P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354;NEMKO:ELA 113a,113c;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178 LT LAB:NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113b,113d;BSMI:SL2-IN-E-0013;CNLA:0997 -8- EUT-8. International Standards Laboratory Report Number: ISL-05LR029P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354;NEMKO:ELA 113a,113c;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178 LT LAB:NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113b,113d;BSMI:SL2-IN-E-0013;CNLA:0997 -9- EUT-9.

Report Number: ISL-05LR029SAR-F Issue Date: 2005/10/31 HC LAB:NVLAP:200234-0;VCCI: R-341,C-354;NEMKO:ELA 113a,113c;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178 LT LAB:NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113b,113d;BSMI:SL2-IN-E-0013;CNLA:0997 ISL-T10-R29-1 SAR Test Report of Product Name PDA with wireless LAN 802.11b and Bluetooth Model n300 (Brand: acer) Applied by: Acer Inc. 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien Taiwan, R. O. C. Test Performed by: International Standards Laboratory No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325 Taiwan, R.O.C. Tel:(03)407-1718 Fax:(03)407-1738 International Standards Laboratory Report Number: 05LR029SAR-F HC LAB:NVLAP:200234-0;VCCI: R-341,C-354;NEMKO:ELA 113a,113c;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178 LT LAB:NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113b,113d;BSMI:SL2-IN-E-0013;CNLA:0997 -i- Contents of Report 1. General ............................................................................................................................. 1 1.1 Certification of Accuracy of Test Data ........................................................................ 1 Acer Inc.............................................................................................................................. 1 2. Description of Equipment Under Test (EUT).................................................................. 2 2.1 Test Environment ......................................................................................................... 2 3. SAR Measurement System .............................................................................................. 3 3.1 ALSAS-10U System Description ................................................................................. 3 3.1.1 Applications ........................................................................................................... 3 3.1.2 Area Scans ............................................................................................................. 3 3.1.3 Zoom Scan (Cube Scan Averaging) ...................................................................... 4 3.1.4 ALSAS-10U Interpolation and Extrapolation Uncertainty ................................... 4 3.2 Isotropic E-Field Probe................................................................................................. 4 3.2.1 Isotropic E-Field Probe Specification.................................................................... 6 3.3 Boundary Detection Unit and Probe Mounting Device ............................................... 6 3.4 Daq-Paq (Analog to Digital Electronics) ..................................................................... 7 3.5 1.5 Axis Articulated Robot........................................................................................... 7 3.6 ALSAS Universal Workstation .................................................................................... 8 3.7 Universal Device Positioner ......................................................................................... 8 3.8 Phantom Types ............................................................................................................. 8 3.8.1 APREL Laboratories Universal Phantom.............................................................. 9 4. Tissue Simulating Liquid............................................................................................... 10 4.1 The composition of the tissue simulating liquid......................................................... 10…

Text truncated - open the document above for the full version.