Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
2‐510‐1 Toyonodai, Kazo‐shi, Saitama 349‐1148 Japan Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 4, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i)&(ii) Filing FCC ID: HV4PTK470 Statement for 47 CFR section 2.911(d)(5)(i) [Wacom Co Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Statement for 47 CFR section 2.911(d)(5)(ii) [Wacom Co Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as a specifically named entity or any of its subsidiaries or affiliates that producing “covered” equipment. Sincerely, Signature: Printed Name /Title: Koichi Yokoyama / Senior Director, Quality Assurance Company Name: Wacom Co Ltd
2‐510‐1 Toyonodai, Kazo‐shi, Saitama 349‐1148 Japan Date: August 6, 2024 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: HV4PTK470 Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view until Feb. 25, 2025. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term Operation Description ☒ Permanent ☐ Short Term Parts List & Placement/BOM ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☒ Short Term Internal Photos ☐ Permanent * ☒ Short Term Test Setup Photos ------------------ ☒ Short Term User’s Manual ☐ Permanent * ☒ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, 2‐510‐1 Toyonodai, Kazo‐shi, Saitama 349‐1148 Japan Signed: Printed name: Koichi Yokoyama Title: Senior Director, Quality Assurance Company Name: Wacom Co Ltd
2-510-1 Toyonodai, Kazo-shi, Saitama 349-1148 Japan Date: September 4, 2024 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: HV4PTK470 To whom it may concern: We, the undersigned, hereby authorize Jim Chang, SGS Taiwan Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Agency Agreement Expiration Date: August 6, 2025 This authorization is valid until further written notice from the applicant. Sincerely, Signature: ____________________ Printed Name /Title: Koichi Yokoyama / Senior Director, Quality Assurance Company Name: Wacom Co Ltd
2-510-1 Toyonodai, Kazo-shi, Saitama 349-1148 Japan Family Declaration Date: September 4, 2024 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Dear Examiner Regarding FCC ID: HV4PTK470 Model numbers: PTK470, PTK470*******(* may be alphanumeric/symbol or blank) There are multiple models submitted for equipment authorization, all of them are identical without any differences or modifications. Packing labels are different for different sales areas. Should you have any questions, please contact us. Sincerely, Name: Koichi Yokoyama Title: Senior Director, Quality Assurance Signature:
2-510-1 Toyonodai, Kazo-shi, Saitama 349-1148 Japan Date: September 4, 2024 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: HV4PTK470 To whom it may concern: The measurements of the equipment class: DCD of this 731 application were performed radiated and therefore additional antenna gain documentation is not required. Sincerely, Signature: Printed Name /Title: Koichi Yokoyama / Senior Director, Quality Assurance Company Name: Wacom Co Ltd
SLA-A818_Orochi_Small_IDLabel_FCC_CN_240624
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2406000408E5 Page: 1 of 8 RF EXPOSURE REPORT Applicant: Wacom Co., Ltd. 2-510-1 Toyonodai, Kazo-shi, Saitama 349-1148 Japan Manufacturer: Wacom Co., Ltd. 2-510-1 Toyonodai, Kazo-shi, Saitama 349-1148 Japan Product Name: Creative Pen Tablet Brand Name: Wacom Model No.: PTK470 Family Model No.: PTK470*******(* may be alphanumeric/symbol or blank) Model Difference: For marketing purpose FCC ID HV4PTK470 Issue Date: Aug. 08, 2024 Approved By John Yeh We hereby certify that: The above equipment was evaluated by SGS Taiwan Ltd. Central RF Lab. The evaluation in this report is in compliance with FCC KDB 447498 D01v06. The results of this report relate only to the sample identified in this report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2406000408E5 Page: 2 of 8 Revision History Report Number Revision Description Issue Date Revised By Remark TESA2406000408E5 00 Original Aug. 08, 2024 Cindy Chou Note: 1、 The remark "*" indicates modification of the report upon requests from certification body. 2、 Variant information of model numbers is provided by the applicant, test results of this report are applicable to the sample EUT(s) received. And are assessed as electrically identical in RF characteristics, therefore, no further assessment required for the variant(s). Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2406000408E5 Page: 3 of 8 Table of Contents 1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................ 4 1.1 Product Description ................…
Text truncated - open the document above for the full version.
DA14535MOD SmartBond TINY Bluetooth® LE Module Target Datasheet Revision 1.5-DRAFT 28-Sept-2023 CFR0011-120-00 21 of 38 © 2023 Renesas Electronics 8 Design Guidelines The DA14535 SmartBond TINY™ Module comes with an integrated PCB trace antenna. The antenna area is 12x4 mm. The antenna’s Voltage Standing Wave Ratio (VSWR) and efficiency depend on the installation location. The radiation performance of the PCB trace antenna depends on the host PCB layout. The maximum antenna gain is -0.5 dBi when installed on a 50x50 mm reference board, as shown in Figure 21. The radiation pattern is omnidirectional. The RF front end is optimized to achieve the maximum possible efficiency for various installation positions of the module on a host PCB. To obtain a similar performance, follow the guidelines described in the following sections. 8.1 Installation Location For optimum performance, install the module at the edge of a host PCB with the antenna edge facing out. The module can be located on either of the outer corners or the middle of the host PCB with equivalent performance. The antenna should have 4 mm free space in all directions. Copper or laminate in the proximity of the PCB trace antenna will affect the efficiency of the antenna. Laminate or copper under the antenna should be avoided as it severely affects the performance of the antenna. The antenna keep-out area can be seen in Figure 11. Metals close to the antenna will degrade the antenna’s performance. The amount of degradation depends on the host system’s characteristics. Table 10 summarizes the antenna efficiency at different installation locations on a host PCB as shown in Figure 10. Table 10: Antenna Efficiency vs TINY TM Module Positions Position # 1 (Left) Position # 2 (Middle) Position # 3 (Right) Freq Antenna efficiency Antenna efficiency Antenna efficiency [MHz] [%] [dB] [%] [dB] [%] [dB] 2405 52 -2,8 40 -4,0 40 -4,0 2440 46 -3,4 34 -4,7 41 -3,9 2480 50 -3,0 40 -4,0 52 -2,8 Figure 10: Installation Locations for Optimum Antenna Performance DA14535MOD SmartBond TINY Bluetooth® LE Module Target Datasheet Revision 1.5-DRAFT 28-Sept-2023 CFR0011-120-00 22 of 38 © 2023 Renesas Electronics Figure 11: Antenna Performance in Proximity of Copper (Left), Laminate (Middle), and Laminate under Antenna (Right) The actual TINY TM module evaluation board layout that has been used to conduct measurements is shown in Figure 12. Figure 12: DA14535 TINY TM Module Evaluation Board DA14535MOD SmartBond TINY Bluetooth® LE Module Target Datasheet Revision 1.5-DRAFT 28-Sept-2023 CFR0011-120-00 23 of 38 © 2023 Renesas Electronics 8.2 Antenna Graphs The antenna VSWR measurements for the three installation positions are shown in the following figures. Figure 13: VSWR Installed in the Upper Left Corner (Position #1) of Evaluation Board Figure 14: VSWR with Module Installed in Center (Position #2) of the Evaluation Board Figure 15: VSWR with Module Installed in the Upper Right Corner (Position #3) of the Evaluation Board DA14535MOD SmartBond TINY Bluetooth® LE Module Target Datasheet Revision 1.5-DRAFT 28-Sept-2023 CFR0011-120-00 24 of 38 © 2023 Renesas Electronics 8.3 Radiation Pattern The antenna radiation pattern measurements are carried out in an anechoic chamber. Radiation patterns are presented for three measurement planes: XY-, XZ-, and YZ- planes with horizontal and vertical polarization of the receiving antenna. Figure 16: Measurement Plane Definition DA14535MOD SmartBond TINY Bluetooth® LE Module Target Datasheet Revision 1.5-DRAFT 28-Sept-2023 CFR0011-120-00 25 of 38 © 2023 Renesas Electronics Measurements are carried out for the module installed in the upper right corner on the reference board with no laminate below the antenna trace. Radiation Pattern for Antenna Trace Horizontal polarization Vertical polarization Figure 17: Radiation Pattern for XY-Plane, Horizontal Polarization Figure 18: Radiation Pattern for XY-Plane, Vertical Polarization Figure 19: Radiation Pattern for XZ-Plane, Horizontal Polarization Figure 20: Radiation Pattern for XZ-Plane, Vertical Polarization Figure 21: Radiation Pattern for YZ-Plane, Horizontal Polarization Figure 22: Radiation Pattern for YZ-Plane, Vertical Polarization
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2406001821E2 Page: 1 of 49 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT Applicant: Wacom Co., Ltd. 2-510-1 To yonodai, Kazo-shi, Saitama 349-1148 Japan Manufacturer: Wacom Co., Ltd. 2-510-1 To yonodai, Kazo-shi, Saitama 349-1148 Japan Product Name: Creative Pen Tablet Brand Name: Wacom Model No.: PTK470 Family Model No.: PTK470*******(* may be alphanumeric/symbol or blank) Model Difference: For marketing purpose Report Number: TERF2406001824E2 FCC ID HV4PTK470 Date of EUT Received: May 27, 2024 Date of Test: July 8, 2024～July 16, 2024 Issue Date: October 9, 2024 Approved B y Arno Hsieh We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. Central RF Lab The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10:2013 and the energy emitted by the sample EUT comply with FCC rule part §15.247. The results of this report relate only to the sample identified in this report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2406001821E2 Page: 2 of 49 Revision History Report Number Revision Description Issue Date Revised By Remark TERF2406001824E2 00 Original Aug. 13, 2024 Candice Li TERF2406001824E2 01 Update Section 2.6 Oct. 9, 2024 Candice Li Note: 1、 The remark "*" indicates modification of the report upon requests from certification body. * Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2406001821E2 Page: 3 of 49 Table of Contents 1 GENERAL INFORMATION .......…
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 2.00 mW |
Pen Tablet
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzLCD SIGNATURE PAD
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzPortable Pad
Equipment Class
DTS - Digital Transmission SystemCreative Pen Tablet
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzCreative Pen Tablet
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz