HYQ23ABRRemote Keyless Entry System and TPMS (Receiver)

Date: FCC ID: HYQ23ABR FRN:0005820071 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Sincerely, US DENSO CORPORATION CFR 47 §2.911 (d)(5) Attestation DENSO CORPORATION (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. February 5, 2026 DENSO CORPORATION (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Engineering Development Promotion Div. Keijiro Kumagai Manager DENSO CORPORATION (“the applicant”) certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification.

Date: FCC ID: HYQ23ABR FRN:0005820071 To:Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC US Agent Contact Person:Jodi Theut Company Name:DENSO INTERNATIONAL AMERICA, INC. Company Address:24777 Denso Drive, Southfield Michigan 48033 U.S.A. E-mail:[email protected] FRN:0029286531 Sincerely, US Jodi Theut DENSO INTERNATIONAL AMERICA, INC. CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation February 5, 2026 This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of DENSO CORPORATION (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63.

Date: FCC ID: HYQ23ABR FRN:0005820071 To:Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA U.S. Agent Information: Contact Person:Jodi Theut Company Name:DENSO INTERNATIONAL AMERICA, INC. Company Address:24777 Denso Drive, Southfield Michigan 48033 U.S.A. E-mail:[email protected] FRN:0029286531 Sincerely, US Engineering Development Promotion Div. DENSO CORPORATION CFR 47 §2.911 (d)(7) Agent Designation Attestation February 5, 2026 DENSO CORPORATION (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Keijiro Kumagai Manager

UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC: Applicant: To whom it may concern: Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. Sincerely, US Letter of Authorization We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. DENSO CORPORATION HYQ23ABR We, the undersigned, hereby authorize Rie Fujiwara of Consumer, Medical & Information Technologies Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Date: February 05, 2026 Engineering Development Promotion Div. DENSO CORPORATION Keijiro Kumagai Manager

UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC: Applicant: Sincerely, US Manager Engineering Development Promotion Div. DENSO CORPORATION Request for Confidentiality Schematic Diagram HYQ23ABR DENSO CORPORATION Please be advised that the following information is to be held confidential on behalf of DENSO CORPORATION referring to the FCC rules 0.457 and 0.459: Block Diagram Operational Description Parts List The application contains technical information which DENSO CORPORATION deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Keijiro Kumagai Date: February 05, 2026

UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC: Applicant: Sincerely, Request for Short-Term Confidentiality Internal Photos Test Setup Photos User Manual The application contains technical information which DENSO CORPORATION deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. HYQ23ABR DENSO CORPORATION Please be advised that the following information is to be held in confidence for 180 days from the date of the Grant of E quipment Authorization and behalf of us, referring to the FCC rules 0.457 and 0.459: External Photos Date: February 05, 2026 Engineering Development Promotion Div. DENSO CORPORATION Keijiro Kumagai Manager

Product: Remote Keyless Entry System and TPMS (Receiver) Model: 23ABR Marking location: Unit: mm Scale: free Note: Compliance statement of marking will not be changed, but marking layout, size and other indications may be changed. Label is affixed with an adhesive or laser-printed, and label will not peel off or rubbed off during the expected product life. (63.5) (90)

Test Report No. 16220783H-R2 Page 1 of 32 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 EMI TEST REPORT Test Report No. 16220783H-R2 Customer DENSO CORPORATION Description of EUT Remote Keyless Entry System and TPMS (Receiver) Model Number of EUT 23ABR FCC ID HYQ23ABR Test Regulation FCC Part 15 Subpart B Test Result Complied Issue Date March 5, 2026 Remarks - Representative test engineer Approved by Masaya Minami Engineer Shinichi Miyazono Leader CERTIFICATE 5107.02 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan, Inc. There is no testing item of "Non-accreditation". Report Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 26.0 Test Report No. 16220783H-R2 Page 2 of 32 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 ANNOUNCEMENT REVISION HISTORY Revision Test Report No. Date Page Revised Contents - (Original) 16220783H February 24, 2026 - 1 16220783H-R1 March 2, 2026 Correction of the Cable name and Length in Clause 4.2; For Mode 1 and 2 No.1: Signal → DC + Signal For Mode 3 No.1: Signal → DC + Signal No.2: Antenna → DC No.3: Signal → DC No.6: Signal → DC / 0.3 → 1.3 2 16220783H-R2 March 5, 2026 Correction to the Shield description in Clause 4.2; For Mode 3 No.2: Shielded → Unshielded  This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc.  The results in this report apply only to the sample tested. (Laboratory was not involved in sampling.)  This sample tested is in compliance with the limits of the above regulation.  The test results in this test report are traceable to the national or international standards.  This test report must not be used by the customer to claim product certification, approval, or endorsement by the A2LA accreditation body.  This test report covers EMC technical requirements. It does not cover administrative issues such as Manual or non-EMC test related Requirements. (if applicable)  The all test items in this test report are conducted by UL Japan, Inc. Ise EMC Lab.  The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan, Inc. has been accredited.  The information provided by the customer for this report is identified in SECTION 1.  The laboratory is not responsible for information provided by the customer which can impact the validity of the results.  For any test report referred in this report, the latest version (including any revisions) is always referred to.  If the latest version is a revision, it replaces the previous version. See the table below for revisions and versions. Test Report No. 16220783H-R2 Page 3 of 32 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Reference: Abbreviations (Including words undescribed in this report) A2LA The American Association for Laboratory Accreditation Hori. Horizontal AAN Asymmetric Artificial Network ICES Interference-Causing Equipment Standard AC Alternating Current I/O Input/Output AE Auxiliary equipment IEC International Electrotechnical Commission AM Amplitude Modulation IEEE Institute of Electrical and Electronics Engineers AMN Artificial Mains Network IF Intermediate Frequency Amp, AMP Amplifier ILAC International Laboratory Accreditation Conference ANSI American National Standards Institute ISED Innovation, Science and Economic Development Canada Ant, ANT Antenna ISN Impedance Stabilization Network AP Access Point ISO International Organization for Standardization ASK Amplitude Shift Keying JAB Japan Accreditation Board Atten., ATT Attenuator LAN Local Area Network AV Average LCL Longitudinal Conversion Loss BPSK Binary Phase-Shift Keying LIMS Laboratory Information Management System BR Bluetooth Basic Rate LISN Line Impedance Stabilization Network BT Bluetooth MRA Mutual Recognition Arrangement BT LE Bluetooth Low Energy N/A Not Applicable BW BandWidth NIST National Institute of Standards and Technology C.F Correction Factor NS No signal detect. Cal Int Calibration Interval NSA Normalized Site Attenuation CAV CISPR AV OBW Occupied BandWidth CCK Complementary Code Keying OFDM Orthogonal Frequency Division Multiplexing CDN Coupling Decoupling Network PER Packet Error Rate Ch., CH Channel PK Peak CISPR Comite International Special des Perturbations Radioelectriques P LT long-term flicker severity Corr. Correction POHC(A) Partial Odd Harmonic Current CPE Customer premise equipment Pol., Pola. Polarization CW Continuous Wave PR-ASK Phase Reversal ASK DBPSK Differential BPSK P ST short-term flicker severity DC Direct Current QAM Quadrature Amplitude Modulation DET Detector QP Quasi-Peak D-factor, D.fac. Distance factor QPSK Quadrature Phase Shift Keying Dmax maximum absolute voltage change during an observation period r.m.s., RMS Root Mean Square DQPSK Differential QPSK RBW Resolution BandWidth DSSS Direct Sequence Spread Spectrum RE Radio Equipment DUT Device Under Test REV Reverse EDR Enhanced Data Rate RF Radio Frequency e.i.r.p., EIRP Equivalent Isotropically Radiated Power RFID Radio Frequency Identifier EM clamp Electromagnetic clamp RNSS Radio Navigation Satellite Service EMC ElectroMagnetic Compatibility RSS Radio Standards Specifications EMI ElectroMagnetic Interference Rx Receiving EMS ElectroMagnetic Susceptibility S.fac. Site factor EN European Norm SINAD Ratio of (Signal + Noise + Distortion) to (Noise + Distortion) e.r.p., ERP Effective Radiated Power S/N Signal to Noise ratio ETSI European Telecommunications Standards Institute SA, S/A Spectrum Analyzer EU European Union SABS South African Bureau of Standards EUT Equipment Under Test SANS South African National Standards Fac. Factor SG Signal Generator FCC Federal Communications Commission SVSWR Site-Voltage Standing Wave Ratio FHSS Frequency Hopping Spread Spectrum THC(A) Total Harmonic Current FM Frequency Modulat…

Text truncated - open the document above for the full version.