IHDP56ND1XT919-SERIES WCDMA/GSM TRANSCEIVER WITH BT & WLAN

APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Temporary Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 8 - 1 Exhibit 8: Draft User’s Manual -- 47 CFR 2.1033(b)(3) The attached User’s Manual is the final production-intended version of the generic Motorola International English User Manual. This guide will be adapted to carrier-specific versions i , but the key information herein will be retained. Translations into other languages will also be done to support the needs of other markets. Minor revisions may be made to these manuals, prior to and subsequent to, placing this product onto the market. Selected portions of the User Guide can be found as indicated below: 8.1 Safety and Regulatory Section: Page 17 8.2 Specific Absorption Rate (SAR) Data: Page 22 i Motorola Mobility attests that the User’s Guide provided with product shipping into Canada will provide any required Industry Canada notices and/or statements in both English and French, per the requirements of RSS-Gen. EN MOTOROLA RAZR D3 TM 2013.02.04 FCC 2013.02.04 FCC 1ENAt a glance At a glance With Chrome™ for Android and loads of Google Play™ apps, MOTOROLA RAZR D3 has everything you need in a design that fits perfectly in the palm of your hand: • Smart Battery Use: Use SMARTACTIONS™ to create rules and optimize power usage. • Photos & Music: Take and send photos to your friends, and listen to music when you want, wherever you are. • Android 4.1 (Jelly Bean): Get just the right information at just the right time with an Android operating system and Google Now™. Go ahead, check it out: At a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 More. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Charge up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Touchscreen Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Home screen & apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Chrome™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Safety, Regulatory & Legal . . . . . . . . . . . . . . . . . . . . . 14 2013.02.04 FCC 2MoreEN More There’s more help, updates, and information right here: •Answers: Touch Apps> Guide Me. • Updates: Get phone updates, PC software, online help, guides, and more at www.motorola.com/myrazrd3 . • Accessories: Find optional accessories for your phone at www.motorola.com/mobility . • Apps: To u ch Play Store. •News: Get the latest news, apps, tips & tricks, videos and so much more—join us on: YouTube™ www.youtube.com/motorola Facebook™ www.facebook.com/motorola Tw i tt e r www.twitter.com/motomobile Google+™ https://plus.google.com/#s/Motorola 2013.02.04 FCC 3ENYour phone Your phone Get to know it for all of its parts. Note: Certain apps and features may not be available in all countries. CalendarEmailChromeGoogle Thu, May 16 76 ° H 77° L 71° Miami 11:35 3G Volume Keys Power/Lock Key Front Camera Notification Light SIM Slots MicroSD Card Slot MicroUSB Connector Note: NFC scan area is on the back of your phone. Press = Screen On/Off. Hold = Phone On/Off. 8MP Photo / 1080p Video Camera (on back) 3.5 mm Headphone To uchscreen 2013.02.04 FCC 4Charge upEN Charge up SIMs in, memory card in, charge up, then power up. Note: This product uses a non-removable battery. The battery should only be replaced by a Motorola-approved service facility. Any attempt to remove or replace your battery, unless performed by a service representative, may damage the product and void your warranty. Note: Using a micro SIM adapter is not recommended. Caution: Before using your phone, please read the safety, regulatory and legal information provided with your product. 4:00 3 Charge up fully. 3 H 1 Insert SIMs using the Card Insertion/Removal Tool. Place the SIM card with the gold contacts facing down. Gently push until it clicks. Note: If your SIM card doesn’t click in, position the Card Insertion/Removal Tool on the edge of the card, and gently push until it clicks. Note: Use only the charger provided with your phone or other Motorola Approved chargers. 2 Insert microSD using the Card Insertion/Removal Tool. 2013.02.04 FCC 5ENRegister Register After you power up, create or log into a Google™ account to access all of your Google services. Registration is secure and only takes a few minutes. Tip: To get your contacts, visit www.motorola.com/transfercontacts . Note: This phone supports apps and services that use a lot of data, so make sure your data plan meets your needs. Contact your service provider for details. 3 Ready. 2 Sign in with your Google™ account. Got Google? Do you have a Google Acount? If you use Gmail, answer Yes. Yes No 1 Select your language. Welcome Your use of this phone is subject to the Motorola privacy policy and its terms. Learn more English Start Emergency call Your setup is now complete! If you have setup any accounts, we will now import your content, such as contacts and email. This may take up to 30 minutes but you can start using your phone right away. We recommend setting a Security Lock for this phone by going into Settings > Security & Screen Lock. Congratulations! Done Setup 2013.02.04 FCC 6RegisterEN Activate SIM cards When two SIM cards are installed, you can activate and use one or both. 1From the home screen, touch Apps> Settings > Dual SIM Settings > Enable/Disable SIM 1, Enable/Disable SIM 2, or both. 2Set Data Connection to SIM 1 or SIM 2. Only SIM 1 supports 3G data network. Note: If only one SIM card is installed, it is active by default. 2013.02.04 FCC 7ENTouchscreen Tips Tou…

Text truncated - open the document above for the full version.

APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 2 - 1 Exhibit 2. Statements of Certification -- Pursuant to 47 CFR 2.907 2.1. Specification Compliance Transceiver type described herein (IHDP56ND1) has been tested in accordance with the requirements contained in the appropriate Commission regulations. To the best of my knowledge, these tests were performed using measurement procedures consistent with industry or Commission standards, and demonstrate that this equipment complies with the appropriate standards. Each unit manufactured, imported, or marketed will conform to the samples tested herein, within the statistical variations that can be expected due to high volume production and test measurement error. NAME: Chris Chang SIGNATURE: /s/ Chris Chang DATE: 6 February 2013 TITLE: Title 2.2. Statement of Certification I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in this application and accompanying technical data are true and correct. The technical data supplied with this application was taken under my supervision and is hereby duly certified. I also certify that this transmit equipment (IHDP56ND1) is in compliance with all applicable parts of the FCC Rules. NAME: John Lewczak SIGNATURE: DATE: 6 February 2013 TITLE: Engineering Manager, Product Safety and Compliance APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 2 - 2 2.3. Attestation Statement (Equipment Class DTS and DSS - Bluetooth/Wi-Fi) This device contains an embedded Bluetooth device, Wi-Fi device, and MOTOtalk capabilities that Motorola Mobility confirms are compliant with the applicable Part 15C regulations. Personal Hotspot operation is only supported in the 2.4 GHz band. 15.247(a)(1) • The hopping sequence must be pseudorandom. • All Channels are used equally on average. • The receiver input bandwidth is approximately equal to the transmit bandwidth. • The receiver hops in sequence with the transmitted signal. 15.247(g) The system is designed to comply with all of the regulations in Section 15.247 when the transmitter is presented with a continuous data (or information). 15.247(h) The system does not coordinate its channel selection/hopping sequence with other frequency hopping systems for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters. NAME: Chris Chang SIGNATURE: /s/ Chris Chang DATE: 6 February 2013 TITLE: Title APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 2 - 3 2.4. Statement Concerning SPEAG Probe Calibration Motorola acknowledges the 5 February 2013 TCB Conference Call agenda item concerning the use of DASY52.8.5 (1059) software, and specifically the FCC’s concerns with bundled SAR probe calibration for LTE and WLAN supported therein. Motorola asserts that standard probe calibration methods used by SPEAG have not changed in recent years. Motorola does not have probes calibrated using the "bundle options" available from SPEAG. NAME: John Lewczak SIGNATURE: DATE: 6 February 2013 TITLE: Engineering Manager, Product Safety and Compliance

APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 13a - 1 22 January 2013 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of transmitter with FCC ID: IHDP56ND1, PCS Handsets, with Wi-Fi and Bluetooth. Gentlemen; Motorola Mobility LLC; 8000 W. Sunrise Blvd.; Plantation, FL 33322 herein submits its application for certification of the multi-mode handset with FCC ID: IHDP56ND1. The primary transceiver in this composite device operates in the 850 MHz Public Mobile Service (PMS) and the 1900 MHz Personal Communications Service (PCS). It supports GSM signaling, and employs GPRS Class 12 and EDGE Class 12 capabilities. This transceiver also operates in the WCDMA mode in these bands. Note: This device also contains functions, and operates within frequency bands, that are not authorized within the United States or its territories. This filing is only applicable to supported US operations. This radio product is also equipped with a Wi-Fi (802.11b/g/n) transceiver. Wi-Fi supports both voice and data for short range wireless communications. The Wi-Fi Bands of Operation is 2.412 - 2.462 GHz for 802.11b/g/n operation. The Wi-Fi device complies 15.247 (c), 15.407, 15.205 and 15.209 (b). This radio product is equipped with a Bluetooth (BT) transceiver. BT supports both voice and data for short range wireless communications. The Bluetooth Band of Operation is 2.402 - 2.480 GHz (1 MHz channel bandwidth). The BT device complies with the requirements of FCC Rule Parts 15.247 (c), 15.205 and 15.209 (b). This product also supports NFC operation as a low-power itinerant transmitter. All transmitters contained in this radio product have been subjected to routine environmental evaluation (as applicable) according to 47 CFR Part 2.1093 (c) for RF exposure and found to be compliant with the limits specified in 47 CFR 2.1093(d)(2). APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 13a - 2 This radio product features integrated GPS receiver, and is designed to function as a computer peripheral device when functioning as an RF modem, while connected to a computer via a data cable, as described in 47 CFR Part 15.3(r). A Part 15B test report is included for certification. Enclosed is a complete Certification Application. Contact me at (954) 723-6272 if you require any additional information. Regards, FCC Liaison Motorola Mobility LLC 8000 W. Sunrise Blvd.; Suite A Mail Stop 52-5JJ Plantation, FL 33322 E-mail: [email protected]

FCC ID: IHDP56ND1 Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 13b - 1 CONFIDENTIALITY REQUEST 18 January 2013 Federal Communications Commission Laboratory Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request Regarding Application for Certification of FCC ID: IHDP56ND1. Dear Sir or Madam: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagrams. IHDP56ND1_Ex_04 (Block Diagrams).pdf Schematic Diagrams. IHDP56ND1_Ex_05 (Schematic Diagrams).pdf Parts List and Tune Up Procedures. IHDP56ND1_Ex_10 (Active Components).pdf Transmitter Characteristics. IHDP56ND1_Ex_12 (TX Characteristics).pdf Motorola Mobility LLC requests that these exhibits be held as Permanently Confidential, and not be made routinely available for public inspection. Motorola considers that the information in these exhibits should be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Motorola Mobility LLC understands that, pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. FCC ID: IHDP56ND1 Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 13b - 2 SHORT TERM ONFIDENTIALITY REQUEST – 180 DAYS Pursuant to the Commission’s public notice DA 04-1705 (June 15, 2004), Motorola Mobility LLC is also requesting Temporary Confidentiality treatment of information accompanying this application as outlined below. This provision will give Motorola Mobility LLC temporary confidentiality prior to product launch. Exhibit Type File Name External product photographs. IHDP56ND1_Ex_03 (External_Photos).pdf Test set-up photographs. IHDP56ND1_Ex_07b (SAR Test Set- up_Details).pdf IHDP56ND1_Ex_07c (Part 15 Test Set- up_Details).pdf IHDP56ND1_Ex_07d (HAC Test Set- up_Details).pdf User’s Manual. IHDP56ND1_Ex_08 (User Guide).pdf Internal product photographs. IHDP56ND1_Ex_09 (Internal Photos).pdf Please contact me if you require any additional information. Regards, FCC Liaison Motorola Mobility LLC 8000 W. Sunrise Blvd.; Suite A Mail Stop 52-5JJ Plantation, FL 33322 E-mail: [email protected]

APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Temporary Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 3 - 1 Exhibit 3. External Photographs -- Pursuant to 47 CFR 2.1033(c)(12) The radio product colors, housings/bezels may vary, but only consistent with the requirements of FCC Class I Permissive Change rules and guidance (47 CFR 2.1043 and KDB 178919 D01). Figure 3-1. Front of device APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Temporary Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 3 - 2 Figure 3-2. Back of device APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Temporary Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 3 - 3 Figure 3-3. Button Side of device Figure 3-4. Opposite Side of device APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Temporary Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 3 - 4 Figure 3-5. Top of radio Figure 3-6. Bottom of radio

APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 1 - 1 Exhibit 1: Identification Label -- Pursuant to 47 CFR 2.925 and 2.1033(c)(11) 1.1 Location On the rear (back) side of the radio product chassis, etched into the housing, near the bottom edge of the device (see Figure 1.3.2, and also Exhibit 3). 1.2 Type The label will be laser etched into the rear housing of the device. 1.3 Markings (Text) The FCC label shown is representative of the label that will appear on the radio when in production. Figure 1.3.1. Representation of FCC Label information. Figure 1.3.2. Representation of FCC Label information. This information will be permanently etched onto the equipment rear cover as shown below, and in Exhibit 3. Other information may also be present. FCC ID IHDP56ND1 Model No. XT920 FCC ID IHDP56ND1 Model No. XT919 APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 1 - 2 Figure 1.3.2. Location of FCC Label (position, orientation, and other information shown may vary). Please note that this label and its placement complies with the requirement of FCC Rule 47 CFR 2.925(d) that the label be permanently affixed to the product, and be readily visible to the purchaser at the time of purchase. The product’s Market or Trade Name is indelibly printed on the face of the product, as shown in Exhibit 3. FCC Label Back of Device APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 1 - 3 Exhibit 1A: General Information 1A.1 Production Plans Quantity production is planned. 1A.2 Data Submittal Procedure The information in this application is provided in accordance with requirements for certification as outlined in the FCC Rules and Regulations: 47 CFR Part 2; Subpart J; Part 15, Subparts B and C; Part 22 Subpart H; and Part 24 Subparts B and E. 1A.3 Similar, currently Certified Transceiver FCC ID: IHDT56NN1 1A.4 Additional Considerations In addition to the radio receivers associated with the services authorized within this application, this device integrates a receiver designed to process signals from Global Positioning System satellites. Compliance with FCC requirements was done via the Verification process (47 CFR 2.902). This device may be considered to be a digital device, per 47 CFR 15.3(k), and can function as a computer peripheral device when functioning as an RF modem, as described in 47 CFR 15.3(r).

APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Temporary Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 9 - 1 Exhibit 9: Internal Photographs -- Pursuant to 47 CFR 2.1033(c)(12) Photograph 9-1: Front side view of the device’s PC Board, Shields Removed. APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Temporary Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 9 - 2 Photograph 9-2: Back side view of the device’s PC Board. APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Temporary Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 9 - 3 Photograph 9-3: Interior Housing View – PC Board with Shields in Place. APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Temporary Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 9 - 4 Photograph 9-4: Antenna Locations. APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Temporary Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 9 - 5 Photograph 9-5: Bluetooth and GPS Antenna Detail. APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Temporary Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 9 - 6 Photograph 9-6: NFC Antenna Detail.

APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Test Report Number: 25258-1NFC 1 of 15 EXHIBIT 6A10 MOBILE DEVICES BUSINESS PRODUCT SAFETY AND COMPLIANCE EMC LABORATORY EMC TEST REPORT Test Report Number – 25258-1NFC The test results contained herein relate only to the model(s) identified. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical characteristics. As the responsible EMC Engineer, I hereby declare that the equipment tested as specified in this report conforms to the requirements indicated. Signature: Name: Albert J. Patapack Title: EMC Engineer Date: February 12, 2013 This report must not be reproduced, except in full, without written approval from this laboratory. 2404 APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Test Report Number: 25258-1NFC 2 of 15 EXHIBIT 6A10 Table of Contents Description Page Test Report Details 3 Applicable Standards 3 Summary of Testing 4 General and Special Conditions 4 Equipment and Cable Configuration 5 Equipment List 5 Measurement Procedures and Data 6 APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Test Report Number: 25258-1NFC 3 of 15 EXHIBIT 6A10 Test Report Details Tests Performed By: ADR Testing Service Location Code: ADR LV Motorola Mobility LLC Product Safety and Compliance Group 600 North US Hwy 45 Libertyville, IL 60048 PH (847) 523-6167 Fax (847) 523-4538 FCC Registration Number: 316588 Industry Canada Number: 109O-1 Tests Requested By: Motorola Mobility LLC 600 North US Hwy 45 Libertyville, IL 60048 Product Type: Cellular Phone Signaling Capability: WCDMA 850/1900, GSM 850/1900, EDGE 850/1900, HSDPA, HSUPA, GPRS, Bluetooth LE + EDR, 802.11b/g/n FCC ID: IHDP56ND1 Serial Numbers: 353208050050352, 353208050050725 Testing Complete Date: February 12, 2013 Applicable Standards All tests and measurements indicated in this document were performed in accordance with the Code of Federal Regulations Title 47: X Part 15 Subpart C – Intentional Radiators Applicable Standards: ANSI 63.4 2003, RSS-210 Issue 8, Part 15 Subpart C (15.225) APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Test Report Number: 25258-1NFC 4 of 15 EXHIBIT 6A10 Summary of Testing Test Test Name # Pass/Fail _________ 1 Field Strength of Spurious Emissions Pass from Intentional Radiators 2 AC Line Conducted Emissions Pass Test Test Name Margin with respect # to the Limit_________ 1 Field Strength of Spurious Emissions see results from Intentional Radiators 2 AC Line Conducted Emissions see results The margin with respect to the limit is the minimum margin for all modes and bands. General and Special Conditions This product utilizes an internal battery that is not removable. When applicable, EMC testing was performed with the internal battery fully charged. Where a battery could not be used due to the need for a controlled variation of input voltage, an external power supply was utilized. All testing was done in an indoor controlled environment. The temperature and the relative humidity were maintained within the ANSI C63.4 2003 Standard requirements during the entire duration of testing. Equipment and Cable Configurations The EUT was tested in a configuration as specified by ANSI C63.4 2003 Standard requirements. APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Test Report Number: 25258-1NFC 5 of 15 EXHIBIT 6A10 Equipment List Manufacturer Equipment Type Model No. Serial Number Calibration Due Date Rohde & Schwarz Receiver ESU40 100286 5/15/2013 Agilent MXA Signal Analyzer N9020A US46470586 1/20/2014 Attenuator Weinschel AS-6 6675 NCR Attenuator Weinschel AS-6 6677 NCR ETS LISN 3810/2NM 00062907 8/7/2013 ETS LISN 3810/2NM 00062912 8/6/2013 ETS Loop Antenna 6507 00049471 1/7/2014 Thermotron Environmental Chamber S-4 31580 11/15/2013 All test equipment was within their calibration date during the time of testing. When equipment went out of calibration during testing it was replaced using a similar piece of calibrated equipment. All these equipments are listed in the equipment list. All equipment is on a one-year calibration cycle. APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Test Report Number: 25258-1NFC 6 of 15 EXHIBIT 6A10 Measurement Procedures and Data FIELD STRENGTH OF EMISSIONS FROM INTENTIONAL RADIATORS Measurement Procedure The equipment under test is placed inside the semi-anechoic chamber on a wooden table on the center of the turntable. Initially, for all radiated emissions from 9 kHz to 30 MHz, the turntable is rotated 45 degrees to obtain a maximum reading on the spectrum analyzer using the peak detector function. All final readings are then taken at the worst case EUT orientation. For all radiated emissions from 30 MHz to 1 GHz, the antenna mast is varied from 1 to 4 meters and the turntable is rotated 360 degrees to obtain a maximum reading on the spectrum analyzer using the peak detector function. Below 1000 MHz, the final radiated emissions are then measured using an EMI receiver employing a CISPR quasi- peak detector. This is repeated for both horizontal and vertical polarizations of the receive antenna. The field strength of each radiated emission is calculated by correcting the EMI receiver level for cable loss, amplifier gain and antenna correction factors. Field Strength (dBuV/m) = EMI Receiver Level (dBuV) + Cable Loss (dB) - Amplifier Gain (dB) + Antenna Correction Factor (1/m) Test Setup The EUT and the host equipment were setup according to the procedures in ANSI C63.4- 2003. A software application was run on the phone which enables the phone to transmit at all the different modulations and data rates supported for NFC operation. EUT was tested in all 3 orthogonal planes. The loop antenna was positioned in all 3 orthogonal axes. Worst case results are reported. APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56ND1 Test Report Number: 25258-1NFC 7 of 15 EXHIBIT 6A10 Measurement Results Radiated emissions were measured from 9 kHz to 30 M…

Text truncated - open the document above for the full version.

APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56MD1 Short-Term Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 7B - 1 Exhibit 7B: Test Set-up Photographs pursuant to 47 CFR 2.948. This exhibit presents additional details concerning the test set-ups used to collect the EMC data presented elsewhere in this filing. 7B1. Test Set-up for Transmitter Spurious Emissions Tests. Figure 7B1-1: TX Radiated Configuration. APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56MD1 Short-Term Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 7B - 2 Figure 7B1-2: Antenna - Substitution. APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56MD1 Short-Term Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 7B - 3 7B2. Test Set-up for Spurious Radiations Tests. Figure 7B2-1: Spurious Radiations (Part 15 Computing Device). APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56MD1 Short-Term Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 7B - 4 7B3. Test Set-up for Power Line Conducted Spurious Voltages. Figure 7B3-1: Test Configuration – AC Line (Part 15 Computing Device). APPLICANT: MOTOROLA MOBILITY LLC FCC ID: IHDP56MD1 Short-Term Confidentiality Requested Motorola Mobility LLC; 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA www.motorola.com Page 7B - 5 Figure 7B3-2: Test Configuration – AC Line (Part 15 WLAN/Bluetooth).

Motorola Mobility LLC FCC ID:IHDP56ND1 Test Set-Up Photos EUT Type: Portable Handset Page 1 of 2 © 2013 PCTEST Engineering Laboratory Inc. TEST SETUP PHOTOGRAPHS Motorola Mobility LLC FCC ID:IHDP56ND1 Test Set-Up Photos EUT Type: Portable Handset Page 2 of 2 © 2013 PCTEST Engineering Laboratory Inc.