IHDT56AS2Mobile Cellular Phone

Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: May 23, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Certification Designing a U.S. Agent for Service of Process Concerning “Covered” Equipment Pursuant to Section 1.50002 FCC ID: IHDT56AS2 FCC ID: IHDT56AS3 To Whom It May Concern, As required by section 2.911(d)(7) of Commission’s rules (47 CFR), Motorola Mobility LLC acknowledge, consents and certifies that, as of the date of the filing of the application until this certification is revoked in writing by the applicant: • The applicant designates itself as the U.S. agent to accept service of process. • The physical U.S. address and email of the applicant as designated agent are as follows: Attention: Jeff Narducci Company: Motorola Mobility LLC Address: 222 W. Merchandize Mart Plaza, Chicago Il US FRN: 0004321311 Email: Jeff Narducci <[email protected]> • Applicant will remain as the designated agent for service for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. • The agent accepts the designation by Motorola Mobility LLC as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Sincerely, Jeff Narducci Director, Global Regulatory Compliance [email protected]

Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: May 23, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) FCC ID: IHDT56AS2 FCC ID: IHDT56AS3 To Whom It May Concern, As required by section 2.911(d)(5)(i) of Commission’s rules (47 CFR), Motorola Mobility LLC certifies that, as of the date of the filing of the application, the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. As required by section 2.911(d)(5)(ii) of Commission’s rules (47 CFR), Motorola Mobility LLC certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Jeff Narducci Director, Global Regulatory Compliance [email protected]

Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Motorola Mobility LLC attests that this client device, FCC ID: IHDT56AS2, FCC ID: IHDT56AS3 complies with device protocol requirements and operational restrictions: for indoor client 6XD 1. The device will only associate and connect with a low-power indoor access point or subordinate device and never directly connect to other client devices. 2. This device will always initiate transmission under the control of a low-power indoor AP or subordinate except for brief transmissions before joining a network. These short messages will only occur if the client has detected an indoor AP or subordinate operating on a channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request. 3. Transmissions will be lower or equal to the power advertised by the indoor low-power access point or subordinate and never above the maximum output power allowed by the FCC grant for equipment class 6XD. 4. Prohibited for control of or communications with unmanned aircraft systems, including drones. Sincerely, Jeff Narducci Director, Global Regulatory Compliance [email protected] statements validated by Hong Yan [email protected]

Declaration Model Information: Manufacturer’s Name: Motorola Mobility LLC Manufacturer’s Business Address: 222 W, Merchandise Mart Plaza, Chicago IL 60654 USA Model Name: XT2407-1,XT2407-2 HW version: DVT2 SW version: U3UW34.46 Description: We Motorola Mobility LLC declare Software change history are list below Software Change Note SW 1: U3UW34.46 SW 2: U3UW34.43 SW 2: U3UW34.38 The difference between SW 1 ,SW2 and SW3 is just for different SW version that not affect the RF test This declaration is issued to: Sporton International Inc. Certified By Title _________ Advisory Engineer,GT Cert Tel Email +86-18150396535 [email protected] Date 2024.6.04 Signature

Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: May 23, 2024 To whom it may concern, Please be notified that I, Jeff Narducci, have designated Jones Tsai of Sporton International Inc. and Dailihua of Motorola Mobility LLC as the persons being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out in their professional capacity by Jones Tsai of Sporton International Inc. and Dailihua of Motorola Mobility LLC in connection with all processes required for FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This authorization is limited to the following product, and shall remain in place until completion of the certification, or until revoked, whichever is earlier: FCC ID: IHDT56AS2 FCC ID: IHDT56AS3 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please don’t hesitate to contact me. Sincerely yours, Jeff Narducci Director, Global Regulatory Compliance [email protected]

Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: May 23, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: IHDT56AS2 FCC ID: IHDT56AS3 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting confidentiality for exhibits filed with the commission supporting the application of equipment authorization for those items referenced above. Motorola Mobility respectfully requests the Commission to withhold indefinitely from public disclosure the following attachments under Long-Term Confidentiality. ⚫ Schematic Diagrams ⚫ Block Diagrams ⚫ Part List ⚫ Operational Description ⚫ Tune-up Procedure The above listed documents contain detailed system and equipment descriptions that are proprietary and confidential information under Motorola trade secret protection. Public disclosure of above documents would be harmful to our company and would provide competitors an unfair advantage. This information is not made publicly available even after commercial release of the device. In additional to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We request the commission to grant short-term confidentiality request on the following attachments for 180 days after the grant as outlined in Public Notice DA 04-1705. ⚫ External Photos ⚫ Internal Photos ⚫ Test Setup Photos ⚫ User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. Sincerely, Jeff Narducci Director, Global Regulatory Compliance [email protected]

FCC E-Label Information A. Images of the e-label screen are provided below: B. Access to the required information on the e-label Users are able to access the information in no more than three steps in a device’s menu. The actual steps are: Settings > then type Regulatory No any special accessories, access codes, or SIM card are required to go through the above steps. C. Devices have physical labels at point of marketing/sale visible to the purchaser (or in the alternative, on the packaging), and at time of importation? At the time of importation, marketing, and sale, the device will have the required physical label on the packaging, which will include the device’s FCC ID. D. Electronic labeling information is programmed into the device by the manufacturer at the time of manufacture. Yes. E. Electronic labeling information not modifiable by any third party. The e-label of the device is programmed by the grantee and secured in such a manner that it cannot be modified by third parties. F. All the applicable regulatory information required on the packaging or user instructions is provided according to the rules. Applicable regulatory information not found in the e-label is contained in the user manual.

159559.6811.5010.1611.5012.9314.50 5762359.5211.009.4711.0012.6914.00 11365159.2910.508.5610.5011.9513.50 17368158.9710.508.6610.5011.8813.50 22970959.029.507.869.5011.4912.50 159559.5611.5010.1911.5012.9014.50 5762359.4611.009.3111.0012.5114.00 11365158.6610.008.4210.0011.5613.00 17368158.3710.008.2210.0011.2913.00 22970958.289.507.789.5011.0512.50 359659.7111.5010.2911.5013.0214.50 5962459.5211.009.4711.0012.4614.00 10764858.8610.508.6210.5011.7513.50 17168058.3310.008.1910.0011.2913.00 22770858.169.507.869.5011.0312.50 7598510.7312.5011.3312.5014.0515.50 71630510.5411.0010.4211.0013.5114.00 119654510.0611.009.6111.0012.8514.00 16767858.8310.509.1610.5012.0113.50 21570259.099.508.369.5011.7512.50 15602510.7612.5011.7712.5014.3115.50 4761859.2311.0010.5511.0012.9514.00 111650510.5911.009.0111.0012.8914.00 143666510.1411.509.9711.5013.0714.50 20769857.909.508.059.5010.9912.50 WiFi 6E WiFi 6E Default/Full power Duty Cycle % Ant 8Ant 7Ant 8+7 Average power (dBm) Tune-up Limit Average power (dBm) Tune-up Limit Average power (dBm) Tune-up Limit 802.11ax-HE40 MCS0 98.57 802.11ax-HE80 MCS0 99.36 802.11ax- HE160 MCS0 98.77 802.11ax-HE20 MCS0 98.56 802.11a 6Mbps94.26 Mode Channel Frequency (MHz)

Date: 2024-5-20 01_WLAN6GHz_802.11ax-HE160 MCS0_Left Cheek_Ch15 Communication System: U-NII-5; Frequency: 6025.0 MHz; Duty Cycle: 1:1.012 Medium: HSL Medium parameters used: f= 6025.0 MHz; σ= 5.46 S/m; ε r = 34.9 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN7577; ConvF(5.25, 5.25, 5.25); Calibrated: 2023-12-13 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1664; Calibrated: 2023-6-6 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2033; Section: LeftHead - Measurement Software: cDASY6 16.2.2.1588 - UID: WLAN, 10755-AAC Area Scan (119.0 mm x 204.0 mm): Measurement Grid: 8.5 mm x 8.5 mm SAR (1g) = 0.283 W/kg; SAR (10g) = 0.093 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 3.4 mm x 3.4 mm x 1.4 mm Power Drift = -0.03 dB SAR (1g) = 0.301 W/kg; SAR (10g) = 0.089 W/kg psAPD (4.0cm2, sq) = 2.04 [W/m2] Date: 2024-5-20 02_WLAN6GHz_802.11ax-HE160 MCS0_Back_5mm_Ch15 Communication System: U-NII-5; Frequency: 6025.0MHz; Duty Cycle: 1:1.012 Medium: HSL Medium parameters used: f= 6025.0 MHz; σ= 5.46 S/m; ε r = 34.9 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN7577; ConvF(5.25, 5.25, 5.25); Calibrated: 2023-12-13 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1664; Calibrated: 2023-6-6 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2033; Section: Flat - Measurement Software: cDASY6 16.2.2.1588 - UID: WLAN, 10755-AAC Area Scan (119.0 mm x 204.0 mm): Measurement Grid: 8.5 mm x 8.5 mm SAR (1g) = 0.240 W/kg; SAR (10g) = 0.086 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 3.4 mm x 3.4 mm x 1.4 mm Power Drift = -0.10 dB SAR (1g) = 0.248 W/kg; SAR (10g) = 0.080 W/kg psAPD (4.0cm2, sq) = 1.85 [W/m2] Date: 2024-5-20 03_WLAN6GHz_802.11ax-HE160 MCS0_Right Side_0mm_Ch15 Communication System: U-NII-5; Frequency: 6025.0 MHz; Duty Cycle: 1:1.012 Medium: HSL Medium parameters used: f= 6025.0 MHz; σ= 5.46 S/m; ε r = 34.9 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN7577; ConvF(5.25, 5.25, 5.25); Calibrated: 2023-12-13 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1664; Calibrated: 2023-6-6 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2033; Section: Flat - Measurement Software: cDASY6 16.2.2.1588 - UID: WLAN, 10755-AAC Area Scan (48.0 mm x 204.0 mm): Measurement Grid: 8.0 mm x 8.5 mm SAR (1g) = 1.29 W/kg; SAR (10g) = 0.297 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 2.2 mm x 2.2 mm x 1.2 mm Power Drift = -0.09 dB SAR (1g) = 1.23 W/kg; SAR (10g) = 0.254 W/kg psAPD (4.0cm2, sq) = 6.05 [W/m2] Scans Setup Scan Type5G Scan Grid Extents [mm]120.0 x 120.0 Grid Steps [lambda]0.0625 x 0.0625 Sensor Surface [mm]2.0 MAIAN/A Measurement Results Scan Type5G Scan Date2024-05-14 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 2.68 psPDtot+ [W/m 2 ] 3.40 psPDmod+ [W/m 2 ] 4.48 E max [V/m]61.4 Power Drift [dB]0.04 01_WLAN6GHz_802.11ax-HE160 MCS0_Right Side_2mm_Ch15 Device Under Test Properties Model, ManufacturerDimensions [mm]IMEIDUT Type Device, 165.0 x 74.0 x 8.0Phone Exposure Conditions Phantom SectionPosition, Test Distance [mm]BandGroup, UIDFrequency [MHz], Channel NumberConversion Factor 5GEDGE RIGHT, 2.00U-NII-5WLAN, 10755-AAC6025.0, 151.0 Hardware Setup PhantomMediumProbe, Calibration DateDAE, Calibration Date mmWave Air -EUmmWV4 - SN9432_F1-55GHz, 2023-12-13 DAE4 Sn1437, 2024-03-14

Date: 2024-5-20 System Check_6500MHz DUT:D6.5GHzV2-SN:1026 Communication System: CW; Frequency: 6500.0 MHz; Duty Cycle: 1:1 Medium: HSL Medium parameters used: f= 6500.0 MHz; σ= 6.08 S/m; ε r = 34.0 Ambient Temperature: 23.5°C; Liquid Temperature: 22.5°C DASY6 Configuration: - Probe: EX3DV4 - SN7577; ConvF(5.25, 5.25, 5.25); Calibrated: 2023-12-13 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1664; Calibrated: 2023-6-6 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2033; Section: Flat - Measurement Software: cDASY6 16.2.2.1588 - UID: CW, 0-- Area Scan (36.0 mm x 51.0 mm): Measurement Grid: 8.5 mm x 8.5 mm SAR (1g) = 26.6 W/kg; SAR (10g) = 5.09 W/kg; Zoom Scan (22.0 mm x 22.0 mm x 22.0 mm): Measurement Grid: 3.4 mm x 3.4 mm x 1.4 mm Power Drift = 0.02 dB SAR (1g) = 30.0 W/kg; SAR (10g) = 5.61 W/kg psAPD (4.0cm2, sq) = 137 [W/m2] Scans Setup Scan Type5G Scan Grid Extents [mm] 120.0 x 120.0 Grid Steps [lambda]0.125 x 0.125 Sensor Surface [mm]10.0 MAIAN/A Measurement Results Scan Type5G Scan Date 2024-05-12 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 177 psPDtot+ [W/m 2 ] 178 psPDmod+ [W/m 2 ] 181 E max [V/m]303 Power Drift [dB]0.01 Measurement Report for Device, FRONT, Validation band, CW, Channel 10000 (10000.0 MHz) Device Under Test Properties Model, ManufacturerDimensions [mm]IMEIDUT Type Device, 100.0 x 100.0 x 105.0Source Exposure Conditions Phantom SectionPosition, Test Distance [mm]BandGroup, UIDFrequency [MHz], Channel NumberConversion Factor 5GFRONT, 10.00Validation bandCW, 0--10000.0, 100001.0 Hardware Setup PhantomMediumProbe, Calibration DateDAE, Calibration Date mmWave Air - EUmmWV4 - SN9432_F1-55GHz, 2023-12-13DAE4 Sn1437, 2024-03-14

Sporton International Inc. (Shenzhen) Page 1 of 25 TEL : +86-755-86379589 / FAX : +86-755-86379595 Issued Date : Jun. 04, 2024 FCC ID : IHDT56AS3 Report Template No. : 200414 FCC WLAN 6GHz RF Exposure Report No. : FA441212C FCC WLAN 6GHz RF Exposure Applicant : Motorola Mobility LLC Equipment : Mobile Cellular Phone Brand Name : Motorola Model Name : XT2407-2 FCC ID : IHDT56AS3 Standard : FCC 47 CFR Part 2 (2.1093) We, Sporton International Inc. (Shenzhen), would like to declare that the tested sample has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (Shenzhen), the test report shall not be reproduced except in full. Approved by: Si Zhang Sporton International Inc. (Shenzhen) 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China Sporton International Inc. (Shenzhen) Page 2 of 25 TEL : +86-755-86379589 / FAX : +86-755-86379595 Issued Date : Jun. 04, 2024 FCC ID : IHDT56AS3 Report Template No. : 200414 FCC WLAN 6GHz RF Exposure Report No. : FA441212C Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Administration Data ...................................................................................................................................................... 5 3. Guidance Applied .......................................................................................................................................................... 5 4. Equipment Under Test (EUT) Information ................................................................................................................... 6 4.1 General Information ............................................................................................................................................... 6 5. RF Exposure Limits....................................................................................................................................................... 7 5.1 Uncontrolled Environment ...................................................................................................................................... 7 5.2 Controlled Environment .......................................................................................................................................... 7 5.3 RF Exposure limit for below 6GHz ......................................................................................................................... 7 5.4 RF Exposure limit for above 6GHz ......................................................................................................................... 8 6. System Description and Setup .................................................................................................................................... 9 7. Test Equipment List .....................................................................................................................................................10 8. SAR System Verification .............................................................................................................................................11 8.1 SAR Tissue Verification ......................................................................................................................................... 11 8.2 SAR System Performance Check Results ............................................................................................................ 11 8.3 PD System Verification Results .............................................................................................................................12 9. RF Exposure Positions ................................................................................................................................................13 9.1 Ear and handset reference point ...........................................................................................................................13 9.2 Definition of the cheek position .............................................................................................................................14 9.3 Definition of the tilt position ...................................................................................................................................15 9.4 Body Worn Accessory ...........................................................................................................................................16 9.5 Product Specific/Extremity Exposure ....................................................................................................................16 9.6 Miscellaneous Testing Considerations ..................................................................................................................16 10. WLAN 6GHz Output Power (Unit: dBm) ...................................................................................................................17 11. Antenna Location .......................................................................................................................................................18 12. RF Exposure Test Results .........................................................................................................................................19 12.1 Head SAR Test Result ........................................................................................................................................20 12.2 Body Worn SAR Test Result ...............................................................................................................................20 12.3 Product Specific SAR Test Result ....…

Text truncated - open the document above for the full version.

Scans Setup Scan Type5G Scan Grid Extents [mm]120.0 x 120.0 Grid Steps [lambda]0.0625 x 0.0625 Sensor Surface [mm]2.0 MAIAN/A Measurement Results Scan Type5G Scan Date2024-05-15 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 2.55 psPDtot+ [W/m 2 ] 3.01 psPDmod+ [W/m 2 ] 3.77 E max [V/m]55.1 Power Drift [dB]0.01 1_WLAN6GHz_802.11ax-HE160 MCS0_Right Side_2mm_Ch15 Device Under Test Properties Model, ManufacturerDimensions [mm]IMEIDUT Type Device, 164.0 x 74.0 x 8.0Phone Exposure Conditions Phantom SectionPosition, Test Distance [mm]BandGroup, UIDFrequency [MHz], Channel NumberConversion Factor 5GEDGE RIGHT, 2.00U-NII-5WLAN, 10755-AAC6025.0, 151.0 Hardware Setup PhantomMediumProbe, Calibration DateDAE, Calibration Date mmWave Air -EUmmWV4 - SN9432_F1-55GHz, 2023-12-13 DAE4 Sn1437, 2024-03-14

Scans Setup Scan Type5G Scan Grid Extents [mm] 120.0 x 120.0 Grid Steps [lambda]0.125 x 0.125 Sensor Surface [mm]10.0 MAIAN/A Measurement Results Scan Type5G Scan Date 2024-05-12 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 177 psPDtot+ [W/m 2 ] 178 psPDmod+ [W/m 2 ] 181 E max [V/m]303 Power Drift [dB]0.01 Measurement Report for Device, FRONT, Validation band, CW, Channel 10000 (10000.0 MHz) Device Under Test Properties Model, ManufacturerDimensions [mm]IMEIDUT Type Device, 100.0 x 100.0 x 105.0Source Exposure Conditions Phantom SectionPosition, Test Distance [mm]BandGroup, UIDFrequency [MHz], Channel NumberConversion Factor 5GFRONT, 10.00Validation bandCW, 0--10000.0, 100001.0 Hardware Setup PhantomMediumProbe, Calibration DateDAE, Calibration Date mmWave Air - EUmmWV4 - SN9432_F1-55GHz, 2023-12-13DAE4 Sn1437, 2024-03-14

Sporton International Inc. (Shenzhen) Page 1 of 15 TEL : +86-755-86379589 / FAX : +86-755-86379595 Issued Date : Jun. 04, 2024 FCC ID : IHDT56AS2 Report Template No. : 200414 FCC WLAN 6GHz RF Exposure Report No. : FA441212-01C FCC WLAN 6GHz RF Exposure Applicant : Motorola Mobility LLC Equipment : Mobile Cellular Phone Brand Name : Motorola Model Name : XT2407-1 FCC ID : IHDT56AS2 Standard : FCC 47 CFR Part 2 (2.1093) We, Sporton International Inc. (Shenzhen), would like to declare that the tested sample has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (Shenzhen), the test report shall not be reproduced except in full. Approved by: Si Zhang Sporton International Inc. (Shenzhen) 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China Sporton International Inc. (Shenzhen) Page 2 of 15 TEL : +86-755-86379589 / FAX : +86-755-86379595 Issued Date : Jun. 04, 2024 FCC ID : IHDT56AS2 Report Template No. : 200414 FCC WLAN 6GHz RF Exposure Report No. : FA441212-01C Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Administration Data ...................................................................................................................................................... 5 3. Guidance Applied .......................................................................................................................................................... 5 4. Equipment Under Test (EUT) Information ................................................................................................................... 6 4.1 General Information ............................................................................................................................................... 6 5. RF Exposure Limits....................................................................................................................................................... 7 5.1 Uncontrolled Environment ...................................................................................................................................... 7 5.2 Controlled Environment .......................................................................................................................................... 7 5.3 RF Exposure limit for above 6GHz ......................................................................................................................... 7 6. System Description and Setup .................................................................................................................................... 8 7. Test Equipment List ...................................................................................................................................................... 9 8. PD System Verification Results ..................................................................................................................................10 9. PD Test Result ..............................................................................................................................................................11 10. Uncertainty Assessment ...........................................................................................................................................13 11. References ..................................................................................................................................................................15 Appendix A. Plots of System Performance Check Appendix B. Plots of High PD Measurement Appendix C. DASY Calibration Certificate Appendix D. Test Setup Photos Sporton International Inc. (Shenzhen) Page 3 of 15 TEL : +86-755-86379589 / FAX : +86-755-86379595 Issued Date : Jun. 04, 2024 FCC ID : IHDT56AS2 Report Template No. : 200414 FCC WLAN 6GHz RF Exposure Report No. : FA441212-01C History of this test report Report No. Version Description Issued Date FA441212-01C 01 Initial issue of report Jun. 04, 2024 Sporton International Inc. (Shenzhen) Page 4 of 15 TEL : +86-755-86379589 / FAX : +86-755-86379595 Issued Date : Jun. 04, 2024 FCC ID : IHDT56AS2 Report Template No. : 200414 FCC WLAN 6GHz RF Exposure Report No. : FA441212-01C 1. Statement of Compliance The maximum results of Specific Absorption Rate (SAR) found during testing for Motorola Mobility LLC, Mobile Cellular Phone, XT2407-1, are as follows. Band Tx Frequency (MHz) Scaled PD psPD (W/m^2) WLAN 6GHz 5925-7125 7.06 Date of Testing: 2024/5/12 Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. This device is in compliance with Power density exposure limits (1 mW/cm^2 = 10 W/m^2) specified in FCC 47 CFR part 2 (2.1093), ANSI/IEEE C95.1-1992 and FCC 47 CFR Part1.1310 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528-2013 and FCC KDB publications. Sporton International Inc. (Shenzhen) Page 5 of 15 TEL : +86-755-86379589 / FAX : +86-755-86379595 Issued Date : Jun. 04, 2024 FCC ID : IHDT56AS2 Report Template No. : 200414 FCC WLAN 6GHz RF Exposure Report No. : FA441212-01C 2. Administration Data Sporton International Inc. (Shenzhen) is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145…

Text truncated - open the document above for the full version.

Sporton International Inc. (Shenzhen) Page : 1 of 103 TEL : +86-755-86379589 / FAX : +86-755-86379595 Issued Date : Jun. 07, 2024 FCC ID : IHDT56AS2 Form version. : 200414 FCC SAR Test Report Report No. : FA441212-01 FCC SAR Test Report APPLICANT : Motorola Mobility LLC EQUIPMENT : Mobile Cellular Phone BRAND NAME : Motorola MODEL NAME : XT2407-1 FCC ID : IHDT56AS2 STANDARD : FCC 47 CFR Part 2 (2.1093) We, Sporton International Inc. (Shenzhen), would like to declare that the te…

Text truncated - open the document above for the full version.