IHDT56AW7Mobile Cellular Phone

Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: December 15, 2025 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Certification Designing a U.S. Agent for Service of Process Concerning “Covered” Equipment Pursuant to Section 1.50002 FCC ID: IHDT56AW7 To Whom It May Concern, As required by section 2.911(d)(7) of Commission’s rules (47 CFR), Motorola Mobility LLC acknowledge, consents and certifies that, as of the date of the filing of the application until this certification is revoked in writing by the applicant: • The applicant designates itself as the U.S. agent to accept service of process. • The physical U.S. address and email of the applicant as designated agent are as follows: Attention: Jeff Narducci Company: Motorola Mobility LLC Address: 222 W. Merchandize Mart Plaza, Chicago Il US FRN: 0004321311 Email: Jeff Narducci <[email protected]> • Applicant will remain as the designated agent for service for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. • The agent accepts the designation by Motorola Mobility LLC as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. • The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. Sincerely, Jeff Narducci Director, Global Regulatory Compliance [email protected]

Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: January 7, 2026 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) FCC ID: IHDT56AW7 To Whom It May Concern, As required by section 2.911(d)(5)(i) of Commission’s rules (47 CFR), Motorola Mobility LLC certifies that the equipment for which authorization is sought is not the equipment on the Covered List, as established pursuant to § 1.50002 of CFR Title 47, that is prohibited from obtaining an equipment authorization under this subpart. This includes equipment that: (1) Has been certified as a modular transmitter; or (2) Meets the modular transmitter requirements of § 15.212 of this chapter and could be certified as a modular transmitter. pursuant to section 2.903 resulting the recent adoption of FCC 25-71 (et al., ET Docket No. 21-232, Second Report and Order); or (3) Uncrewed aircraft systems (UAS) and UAS critical components produced in a foreign country and all communications and video surveillance equipment and services listed in Section 1709(a)(1) of the FY25 National Defense Authorization Act (Pub. L. 118-159). Motorola Mobility LLC certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Motorola Mobility LLC certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Motorola Mobility LLC further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software is installed in the equipment being certified. The above-referenced Covered List is published by the Public Safety and Homeland Security Bureau (PSHSB), pursuant to Section 1.50002 of the Commission’s rules. Sincerely, Jeff Narducci Director, Global Regulatory Compliance [email protected]

Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: December 15, 2025 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: IHDT56AW7 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting confidentiality for exhibits filed with the commission supporting the application of equipment authorization for those items referenced above. Motorola Mobility respectfully requests the Commission to withhold indefinitely from public disclosure the following attachments under Long-Term Confidentiality. ⚫ Schematic Diagrams ⚫ Block Diagrams ⚫ Part List ⚫ Operational Description ⚫ Tune-up Procedure The above listed documents contain detailed system and equipment descriptions that are proprietary and confidential information under Motorola trade secret protection. Public disclosure of above documents would be harmful to our company and would provide competitors an unfair advantage. This information is not made publicly available even after commercial release of the device. In additional to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We request the commission to grant short-term confidentiality request on the following attachments for 180 days after the grant as outlined in Public Notice DA 04-1705. ⚫ External Photos ⚫ Internal Photos ⚫ Test Setup Photos ⚫ User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. Sincerely, Jeff Narducci Director, Global Regulatory Compliance [email protected]

Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: December 15, 2025 To whom it may concern, Please be notified that I, Jeff Narducci, have designated Jones Tsai of Sporton International Inc. and Dailihua of Motorola Mobility LLC as the persons being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out in their professional capacity by Jones Tsai of Sporton International Inc. and Dailihua of Motorola Mobility LLC in connection with all processes required for FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf including the release of confidential information. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This authorization is limited to the following product, and shall remain in place until completion of the certification, or until revoked, whichever is earlier: FCC ID: IHDT56AW7 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please don’t hesitate to contact me. Sincerely yours, Jeff Narducci Director, Global Regulatory Compliance [email protected]

Declaration Model Information: Manufacturer’s Name: Motorola Mobility LLC Manufacturer’s Business Address: 222 W, Merchandise Mart Plaza, Chicago IL 60654 USA Model Name: XT2605-3 HW version: DVT2 SW version: W2WE36.32 Description: We Motorola Mobility LLC declare H Software change history are list below Software Change Note SW 1:W2WE36.32 SW 2: W2WE36.39 SW 3: W2WE36.40 SW 4: W2WE36.51 The difference between SW 1 ,SW2 , SW3 and SW 4 is just for different SW version that not affect the RF test This declaration is issued to: Sporton International Inc. Certified By Title _________ Advisory Engineer,GT Cert Tel Email +86-18150396535 [email protected] Date 2025.12.17 Signature

FCC E-Label Information A. Images of the e-label screen are provided below: B. Access to the required information on the e-label Users are able to access the information in no more than three steps in a device’s menu. The actual steps are: Settings > then type Regulatory No any special accessories, access codes, or SIM card are required to go through the above steps. C. Devices have physical labels at point of marketing/sale visible to the purchaser (or in the alternative, on the packaging), and at time of importation? At the time of importation, marketing, and sale, the device will have the required physical label on the packaging, which will include the device’s FCC ID. D. Electronic labeling information is programmed into the device by the manufacturer at the time of manufacture. Yes. E. Electronic labeling information not modifiable by any third party. The e-label of the device is programmed by the grantee and secured in such a manner that it cannot be modified by third parties. F. All the applicable regulatory information required on the packaging or user instructions is provided according to the rules. Applicable regulatory information not found in the e-label is contained in the user manual.

ADR TEST AND CERTIFICATION CENTER Report No: 25ADRTCC5055 FCC EMC Test Report 1 / 21 LML-R-TCC-201 V1.6 Report Version: Rev.01 FCC EMC TEST REPORT Name of Sample: Mobile Cellular Phone Model of Sample: XT2605-3 Applicant: Motorola Mobility LLC Issued Date: 2025-12-15 ADR TEST AND CERTIFICATION CENTER Motorola Mobility LLC, a Lenovo Company Add: No. 19, Gao Xin 4th Road Wuhan, People’s Republic of China 430205 Phone: (86) 13696970830 E-mail: [email protected] ADR TEST AND CERTIFICATION CENTER Report No: 25ADRTCC5055 FCC EMC Test Report 2 / 21 LML-R-TCC-201 V1.6 Report Version: Rev.01 Editor: Chuan Sun Reviewer: Jianfeng Wen Signatory: Eric Lin Name of Client Motorola Mobility LLC Address of Client 222 W, Merchandise Mart Plaza, Chicago IL 60654 USA Trademark Motorola Type Name or ID IHDT56AW7 Applicant No. RF199809 Sample No. SN: NAVR220248 SN: NAVR220178 SN: NAVR2A0003 SN: NAVR2J0057 Delivering Date 2025-11-12 Test Date(s) 2025-11-25 to 2025-12-13 Sample Illustration None Standard 47 CFR FCC PART 15 Subpart B ANSI C63.4-2014 Conclusion PASS Remarks None ADR TEST AND CERTIFICATION CENTER Report No: 25ADRTCC5055 FCC EMC Test Report 3 / 21 LML-R-TCC-201 V1.6 Report Version: Rev.01 Matters Needing Attention a) The electronic report shall be valid after encryption. b) The paper report shall be valid after being stamped with the official seal of the company. c) The report is invalid without the signature of the Editor, Reviewer and Signatory. d) The test report is invalid if there is any evidence of erasure and/or falsification. e) If there is any dissidence for the test report, please file objection to the lab within 15 days from the date of receiving the test report. f) The test report is only responsible for the tested model/sample; the sample(s) presented in the report are provided by the Client. g) Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the lab. REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE 25ADRTCC5055 Rev. 01 Initial issue of report 2025-12-15 ADR TEST AND CERTIFICATION CENTER Report No: 25ADRTCC5055 FCC EMC Test Report 4 / 21 LML-R-TCC-201 V1.6 Report Version: Rev.01 Catalogue 1. Information Of Equipment Under Test(EUT) ............................................................................................................. 5 2. Details Of Test ................................................................................................................................................................... 6 2.1 Applicant ..................................................................................................................................................................... 6 2.2 Location of Test ........................................................................................................................................................ 7 2.3 Applied Standards .................................................................................................................................................... 7 3. Result Summary ............................................................................................................................................................... 8 4. Tests Configuration Of EUT ........................................................................................................................................... 9 4.1 EUT Test Modes ........................................................................................................................................................ 9 4.2 Configuration Of Test System ............................................................................................................................. 11 4.3 Support Unit For Test ............................................................................................................................................ 11 5. Test Result ....................................................................................................................................................................... 12 5.1 Radiated Emissions ............................................................................................................................................... 12 5.2 Conducted Emissions ........................................................................................................................................... 14 6. Test Equipment And Software .................................................................................................................................... 15 7. System Measurement Uncertainty ............................................................................................................................. 15 8. Test Data ........................................................................................................................................................................... 16 8.1 Radiated Emissions ............................................................................................................................................... 16 8.2 Conducted Emissions ........................................................................................................................................... 18 9. EUT And Test Set-up Photos ....................................................................................................................................... 19 9.1 EUT ............................................................................................................................................................................. 19 9.2 Radiated Emissions ............................................................................................................................................... 20 9.3 Conducted Emissions ..............................................................................................................…

Text truncated - open the document above for the full version.