IHDT56DG1Portable Cellular/PCS Transceiver (AMPS/CDMA)

APPLICANT: MOTOROLA, INC. FCC ID: IHDT56DG1 EXHIBIT 8 INSTRUCTION MANUAL A preliminary draft copy of the Users Manual follows:
  
Welcome
          
           
 Insert headset accessory for hands-free use.    Adjust earpiece and ringer volume.    Record voice notes, phonebook and shortcut names.             Insert charger and phone accessories.    Turn phone on and off, end phone calls, exit menu system.    Perform functions identified by right display prompt. ! "   Perform functions identified by left display prompt.  Send and answer calls, view recent dialed calls list. #$% &'   Scroll through menus and lists, set feature values & access main menu.  used to delete
   
          ! "# $%&% '(''%)*%+, !- '((('&'%)*%+../0.11, !- '(')%')**+  - www.motorola.com +, !- www.motorola.ca +  -
. $ "!2
$ ",!3 4 .5  "6   "66 "6 7  8
 999      ."
6  # "   6"
 "'67     " $7 ", ! "  6
 "'676  : " 6"7 "": "# 6 " 6"7     6" 7    "
6  # '  #6    " : 7#7 ;""6 ""
 6 " # " #6   66"7    " 6"6  6 66  
 "'676 : 6"   ': '  " #6 7 "6 
  #< ===='  #< (&(()(*$%'
    Contents                             !                                      "
# $%&                              " '( )                                " * $                                 $                             + $ ,                                   -    '                   . ( / 0 1                          2  34                               5 6                                  5                                  "                              " 4 / 0 7'                      "                              " ,                                " , +8
79                   "- ,                                  "!  (%                                   , %                         5 :6 ,6/ 0                  5    0                     + * /;   0                   +                                +" < / 7 0 7'              +" < (                         +" <=<                             +" <  1                          +
   ! <
 *                       + << < *                    +- <                          +! <                            +!  3 $6                           +! >  <  :*               +!  "                                  +2   :                        +2 = 7'                             +2 ,=                           +2 , *                                +5 *                       - ( 1                            -  7'                    - 4 =                           - = ,                       - , 7                              -  7'                             -+ 
 <               …

Text truncated - open the document above for the full version.

D R A F T 73 S p e ci f i c A b s o r p t i o n R at e D at a T he model wireless phone meets the gov ernment’s requirements for expos ure to radio wav es. Your wireless phone is a radio tra nsmitter a nd receiver. It is designed a nd manufactured not to exceed limits for expos ure to ra dio frequency (RF ) energy s et by the Federa l C ommunica tions C ommiss ion (FC C) of the U.S. G overnment and by the C a na dian regulatory authorities. T hes e limits a re part of comprehensive guidelines a nd establish permitted levels of R F energy for the genera l population. The guidelines are ba sed on standards that were developed by independent scientific organiz ations through periodic a nd thorough evaluation of scientific studies. T he standa rds include a s ubs tantial sa fety margin des igned to a ss ure the sa fety of all persons, rega rdles s of a ge or hea lth. T he expos ure s ta nda rd for wireles s mobile phones employs a unit of mea s urement known a s the S pecific Absorption R ate, or S AR . The S AR limit s et by the FCC a nd by the C anadia n regula tory a uthorities is 1.6W/kg. 1 Tes ts for S AR are conducted us ing standa rd opera ting pos itions a ccepted by the FCC a nd by Indus try Ca na da with the phone tra ns mitting at its highest certified power level in all tes ted frequency ba nds. Although the S AR is determined a t the highest certified power level, the a ctua l S AR level of the phone while operating can be well below the ma ximum value. This is because the phone is designed to operate a t multiple power levels s o as to use only the power required to reach the network. In general, the closer you a re to a wireless bas e station, the lower the power output. B efore a phone model is ava ila ble for s ale to the public in the U.S. and C anada , it must be tes ted a nd certified to the F C C a nd Indus try C a na da that it does not exceed the limit es tablis hed by ea ch government for s afe exposure. T he tes ts a re performed in pos itions a nd locations (e.g., at the ear a nd worn on the body) reported to the F CC and available for review by Indus try C anada. T he highest S AR value for this model phone when tested for use a t the ear is 1.23 W/kg, and when worn on the body, as D R A F T 74 described in this user guide, is 0.74 W /kg. (Body-worn meas urements differ a mong phone models, depending upon ava ilable a ccess ories a nd regulatory requirements). 2 While there may be differences between the SAR levels of various phones and at va rious positions, they a ll meet the governmental requirements for safe exposure. P lea se note tha t improvements to this product model could ca us e differences in the S AR va lue for la ter products; in a ll cases, products a re des igned to be within the guidelines. Additiona l informa tion on S pecific Abs orption Rates (SAR) can be found on the C ellular Telecommunica tions & Internet As sociation (CT IA) Web s ite: http://phonefacts.net or the C anadia n Wireless Telecommunications Ass ocia tion (CWTA) Web s ite: http://www.cwta.ca 1.In the United S ta tes a nd Canada, the S AR limit for mobile phones used by the public is 1. 6wa tts /kg (W/kg) a veraged over one gra m of tis s ue. The s tanda rd incorpora tes a s ubs ta ntial margin of s a fety to give a dditiona l protec tion for the public and to ac c ount for a ny va ria tions in measurements. 2.The SAR information inc ludes the Motorola tes ting protoc ol, a s s es s ment procedure, a nd measurement unc ertainty ra nge for this product.

APPLICANT MOTOROLA INC. FCC ID: IHDT56DG1 ATTESTATION STATEMENTS Transceiver type IHDT56DG1 has been tested in accordance with the requirements contained in the appropriate Commission regulations. To the best of my knowledge, these tests were performed using measurement procedures consistent with industry or Commission standards and demonstrate that this equipment complies with the appropriate standards. Each unit manufactured imported or marketed, will conform to the sample tested within the variations that can be expected due to quantity production and testing on a statistical basis. I further certify that the necessary measurements were made at Motorola, located at 600 North U.S. Highway 45, Libertyville, IL NAME: Jim Miller TITLE: ENGINEERING MANAGER PERSONAL COMMUNICATIONS SECTOR I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in this application and accompanying technical data are true and correct. The technical data supplied with this application was taken under my supervision and is hereby duly certified. I also certify that this transmit equipment (FCC ID: IHDT56DG1) is in compliance with all applicable parts of the FCC Rules. NAME: Michael Hill TITLE: Manager PCS Safety & Compliance Date: 10/01/2003 EXHIBIT 2 1 APPLICANT MOTOROLA INC. FCC ID: IHDT56DG1 911 Call Processing Method Compliance Statement Method Used Pursuant to 47 CFR Sec. 22.921, this Motorola CDMA phone at the time of commercial distribution will use a call completion method for 911 calls that is approved or endorsed by the FCC. At this time Motorola intends that this phone will incorporate either the Automatic A/B Intelligent Retry method or the Automatic A/B-Intelligent Retry, Version 2 method for providing 911 emergency calling support. EXHIBIT 2 2 APPLICANT MOTOROLA INC. FCC ID: IHDT56DG1 INFORMATION REGARDING ELECTRONIC SERIAL NUMBER PROTECTION This cellular transceiver uses a microprocessor to control its call processing operation. This microprocessor accesses a programmable memory area, which is used to store an encrypted data block that contains the Electronic Serial Number (ESN). A proprietary scheme is used to create this data block whereby it is encrypted using methods similar to known public key cryptography methods. It is emphasized that the method used is similar to but different from these known methods and the actual method used is kept proprietary to provide the essential security for the ESN. Also, the transceiver will not operate unless the microprocessor is able to decrypt this data block correctly. Access is controlled to both the method of encryption and to the production/repair equipment that has the ability to program the encrypted data block. EXHIBIT 2 3

APPLICANT MOTOROLA INC. FCC ID: IHDT56DG1 ATTESTATION STATEMENTS Transceiver type IHDT56DG1 has been tested in accordance with the requirements contained in the appropriate Commission regulations. To the best of my knowledge, these tests were performed using measurement procedures consistent with industry or Commission standards and demonstrate that this equipment complies with the appropriate standards. Each unit manufactured imported or marketed, will conform to the sample tested within the variations that can be expected due to quantity production and testing on a statistical basis. I further certify that the necessary measurements were made at Motorola, located at 600 North U.S. Highway 45, Libertyville, IL NAME: Jim Miller TITLE: ENGINEERING MANAGER PERSONAL COMMUNICATIONS SECTOR I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in this application and accompanying technical data are true and correct. The technical data supplied with this application was taken under my supervision and is hereby duly certified. I also certify that this transmit equipment (FCC ID: IHDT56DG1) is in compliance with all applicable parts of the FCC Rules. NAME: Michael Hill TITLE: Manager PCS Safety & Compliance Date: 10/01/2003 EXHIBIT 2 1 APPLICANT MOTOROLA INC. FCC ID: IHDT56DG1 911 Call Processing Method Compliance Statement Method Used Pursuant to 47 CFR Sec. 22.921, this Motorola CDMA phone at the time of commercial distribution will use a call completion method for 911 calls that is approved or endorsed by the FCC. At this time Motorola intends that this phone will incorporate either the Automatic A/B Intelligent Retry method or the Automatic A/B-Intelligent Retry, Version 2 method for providing 911 emergency calling support. EXHIBIT 2 2 APPLICANT MOTOROLA INC. FCC ID: IHDT56DG1 INFORMATION REGARDING ELECTRONIC SERIAL NUMBER PROTECTION This cellular transceiver uses a microprocessor to control its call processing operation. This microprocessor accesses a programmable memory area, which is used to store an encrypted data block that contains the Electronic Serial Number (ESN). A proprietary scheme is used to create this data block whereby it is encrypted using methods similar to known public key cryptography methods. It is emphasized that the method used is similar to but different from these known methods and the actual method used is kept proprietary to provide the essential security for the ESN. Also, the transceiver will not operate unless the microprocessor is able to decrypt this data block correctly. Access is controlled to both the method of encryption and to the production/repair equipment that has the ability to program the encrypted data block. EXHIBIT 2 3

Date: October 21, 2003 Subject: Request for additional information regarding FCC ID: IHDT56DG1 (Portable Cellular/PCS AMPS/CDMA transceiver) Reference: Application Received: 9/23/2003 Correspondence Reference Number: 231009A.IHD Confirmation Number: TC3241 Date of Original Email: 10/9/2003 Prepared by: Andrew Bachler, Principal Staff Engineer Motorola Personal Communications Sector Libertyville, Illinois Questions and responses follow: 1. What instrument settings (i.e., RBW, VBW, detector function) were used to make both spurious radiated and conducted emission measurements? Response: Please refer to supplemental Test Report (DG-EX06A) submitted on October 21, 2003. 2. The conducted output power for AMPS operation listed on p.8 of the EMC report is greater than the value listed on p.3 of the SAR report. FCC policy requires that the output power levels in the SAR report be equal to or greater than those in the EMC report. Please address. Response: The conducted power listed on page 3 of the SAR report represents the maximum levels which meet factory specifications and may be marketed. To ensure “worst case” compliance testing it is our policy to test using power levels at or slightly above this maximum for both the EMC test report and the SAR report. In particular, the maximum tested AMPS power is shown below. These power levels meet the FCC policy for relative EMC and SAR power. Max Marketed PWRMax PWR EMC Max PWR SAR 26.7 dBm 26.85 dBm 26.86 dBm 3. Please provide occupied bandwidth measurements for both Part 22 and Part 24 CDMA operation. Response: Please see pages 20 and 26 of the test report. 4. Page 9 of the EMC report indicates that the EIRP was measured with BAP mode, when, for CDMA operation, MAP mode should have been used. Please address. 1 Response: The test EMC report incorrectly indicated BAP mode. The radiated power was actually measured with the Gigatronics 8542C Power Meter in the “Mod Avg” Mode. 5. Please submit the modulation characteristics (frequency response) plots for AMPS operation required by Section 2.1047. Response: Please refer to supplemental Test Report (DG-EX06A) submitted on October 21, 2003. 6. Several cellular band SAR plots list Power Step 2. Please confirm that measurements were performed at the highest available power output. Response: Please refer to the supplemental SAR report submitted on October 21, 2003. 7. Please provide SAR data plots for: left head touch for both cellular and PCS; left head tilt for PCS; right head tilt for cellular; body antenna extended for cellular AMPS; body for PCS. Response: Please refer to the supplemental SAR report submitted on October 21, 2003 8. In Fig.2 (p.12) of the SAR report, the contour overlay does not appear to cover the entire antenna area. Please address. Response: Please refer to the supplemental SAR report submitted on October 21, 2003 9. What separation distance was used for body SAR tests? None is indicated. Response: Please refer to the supplemental SAR report submitted on October 21, 2003 10. Please provide additional internal photos of the EUT's pcb's with all shielding removed. Response: Please refer to Exhibit 9A, submitted on October 21, 2003 11. Please enter the maximum measured SAR levels on pages 73 and 74 of the user's manual. Response: Please refer to Exhibit 8A, submitted on October 21, 2003 2

Date: October 23, 2003 Subject: Request for additional information regarding FCC ID: IHDT56DG1 (Portable Cellular/PCS AMPS/CDMA transceiver) Reference: Application Received: 9/23/2003 Correspondence Reference Number: 231022A.IHD Confirmation Number: TC3241 Date of Original Email: 10/9/2003 Prepared by: Andrew Bachler, Principal Staff Engineer Motorola Personal Communications Sector Libertyville, Illinois Question and response follow: 1. Re your response to question #3 of my previous email- you refer to the plots on pp.20 & 26 of the original report. However, these plots (both Part 22 CDMA and Part 24 CDMA) do not indicate the actual measured occupied bandwidths of the emissions (the marker was set to peak search). Please submit plots that show the actual measured occupied bandwidths, as these values will be used in the emission designators on the grants of equipment authorization. Response: Please refer to supplemental Test Report (DG-EX06B) submitted on October 23, 2003. 1

APPLICANT: MOTOROLA FCC ID: IHDT56DG1 September 23, 2003 CONFIDENTIALITY REQUEST CONTAINED WITHIN Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Application for Cellular/PCS Transceiver Certification Gentlemen: Application: Motorola, Inc., Personal Communications Sector, 600 N. U.S. Highway 45, Libertyville, Illinois 60048-1286 herein submits: Application for Equipment Authorization for Certification of a Cellular Transceiver, FCC ID: IHDT56DG1. Motorola is also the manufacturer of this equipment. Confidentiality: Pursuant to Section 0.459 of the Commission's rules (CFR 47), Motorola requests confidentiality for portions of the material contained in this application and that the identified material be withheld from public inspection following the grant of this authorization. This material contains Motorola's trade secrets and confidential information that Motorola does not customarily release to the public and which is otherwise not generally available to the public. Confidentiality is requested for the following exhibits: • Exhibit 4 Block Diagrams • Exhibit 5 Schematics • Exhibit 12 Operational Description Description: This equipment has the capability to operate in the conventional Analog Cellular standard in the 800 MHz cellular band, and the Digital CDMA standard in both the 800 MHz and the 1900 MHz PCS bands. Contact Information: Please contact me by telephone at (847) 523-6167, or by e-mail ( [email protected]), if there are questions or additional information needed concerning this filing. Regards, Andrew J. Bachler FCC Liaison Cellular Subscriber Sector 600 N. U.S. Highway 45 Libertyville, IL 60048-5343 Exhibit 13

APPLICANT: MOTOROLA, INC. FCC ID: IHDT56DG1 EXHIBIT 3 Rear View with Battery Cover Removed Showing ID Label Front View Front View Flip Open

APPLICANT: MOTOROLA INC. FCC ID: IHDT56DG1 EXHIBIT 1 FCC IDENTIFICATION (NAMEPLATE) INFORMATION The FCC label shown is representative of the label that will appear on the radio when in production. It will be placed on the outside of the equipment as shown in Exhibit 3. Other information may also be included on this label. FCC ID: IHDT56DG1

APPLICANT: MOTOROLA, INC. FCC ID: IHDT56DG1 EXHIBIT 9 Rear View Front View

APPLICANT: MOTOROLA, INC. FCC ID: IHDT56DG1 EXHIBIT 9A Rear View without Shields Front View without Shields 1 of 2 APPLICANT MOTOROLA INC. FCC ID: IHDT56DG1 Flip Housing Internal Views Main Housing Internal Views Exhibit 9A 2 of 2

APPLICANT: MOTOROLA, INC. FCC ID: IHDT56DG1 TRANSCEIVER ADJUSTMENTS/TUNE-UP PROCEDURE There are no user accessible adjustments or tuning in this portable cellular transceiver. All necessary adjustments and tuning are performed during manufacture of the product. Any adjustments or tuning after service or repair are done as part of that process, as special equipment is required to perform such adjustments. EXHIBIT 10 1 APPLICANT: MOTOROLA, INC. FCC ID: IHDT56DG1 PARTS LIST Reference Symbol Part Number DESCRIPTION R202, R203, R210, R323, R340 06-00026-01RES 000 5% / ERJ2GE0R00X R37006-00035-01RES 0.15 ohm (1608) 1% / ERJ3RSFR15V R116, R118, R155, R422, R423, R426，R427 06-01026-01RES 10 5%/ ERJ2GEJ100X R10306-02426-01RES 24 5%/ ERJ2GEJ240X R104, R300, R30306-03326-01RES 33 5%/ ERJ2GEJ330X R117 06-05126-01RES 51 5%/ ERJ2GEJ510X R31506-08226-01RES 82 5% / MCR01MZS 820J R100, R105, R120, R121, R128, R225, R311, R418, R419, R420, R421, R424, R425 06-11026-01RES 100 5%/ ERJ2GEJ101X R32006-11226-01RES 120 5% / MCR01MZS 121J R321, R403, R404, R407, R408, R411, R412 R415, R416 06-11526-01RES 150 5% / ERJ2GEJ151X R37106-13326-01RES 330 5% / ERJ2GEJ331X R227, R402, R405, R406, R409, R410, R413, R414, R417 06-14726-01RES 470 5%/ ERJ2GEJ471X R111, R112, R115, R119, R125, R132, R223, R224, R232, R233, R322 06-21026-01RES 1K 5%/ ERJ2GEJ102X R30106-21526-01RES 1.5K 5%/ ERJ2GEJ152X R12906-21826-01RES 1.8K 5%/ ERJ2GEJ182X R127, R216, R218 06-22226-01RES 2.2K 5%/ ERJ2GEJ222X R21206-23326-01RES 3.3K 5% / MCR01MZS332J R13606-23926-01RES 3.9K 5%/ ERJ2GEJ392X R126, R31606-24726-01RES 4.7K 5%/ ERJ2GEJ472X R108, R109, R11006-25725-02RES 5.76K 1% / ERJ2RKF5761X R30606-28825-01RES 8.87k 1% / ERJ2RKF8871X R102, R130, R139, R140, R205, R207, R208, R214, R304,R308, R325, R400, R401, R428, R429, R430, R431, R432, R463, 06-31026-01RES 10K 5%/ ERJ2GEJ103X R31906-31025-01RES 10K 1% / ERJ2RKF1002X R114,R13706-31125-02RES(1005) 11.3K 1%/ ERJ2RKF1132X R31806-31526-01RES 15K 5% / ERJ2GEJ153X R20106-32026-01RES 20K 5%/ ERJ2GEJ203X R30206-32726-01RES 27K 5%/ ERJ2GEJ273X R20006-33026-01RES 30K 5% / MCR01MZS 303J EXHIBIT 10 2 APPLICANT: MOTOROLA, INC. FCC ID: IHDT56DG1 R122, R138, R21306-34726-01RES 47K 5%/ ERJ2GEJ473X R21106-35625-01RES 56K 1% / ERJ2RKF563X R101, R305, R307, R372 06-41026-01RES 100K 5%/ ERJ2GEJ104X R204, R20906-41826-01RES 180K 5%/ ERJ2GEJ184X R21506-43025-01RES 300K 1% / ERJ2RKF304X R151, R15206-44726-01RES 470K 5% / MCR01MZS 474J R20606-45126-01RES 510K 5%/ ERJ2GEJ514X C150, C17121-00022-03CAP (1005) 0.5PF +/-0.25PF/ GRM 36 C0G 0R5 C50 C14921-00122-01CAP 1PF +/- 0.25PF / C1005CH1H010C C83, C20021-00322-01CAP 3PF +/- 0.25PF/ GRM 36 C0G 030 C50 C19, C2721-00422-01CAP 4PF +/- 0.25PF/ GRM 36 C0G 040 C50 C36, C3721-00722-01CAP(1005) 7PF +/- 0.25PF / CL05C070CBNC C18321-00823-01CAP 8P +/-0.5P / C1005CH1H080D/CL05C080DBNC C6921-01023-01CAP 10PF +/- 0.5PF/ GRM 36 C0G 100 D50 C228, C229, C317, C318 21-01826-01CAP 18PF +/- 5%/ GRM 36 C0G 180 J50 C218, C225, C226, C230, C336, C338 21-03326-01CAP 33PF +/- 5% / GRM 36 C0G 330 J50 C9, C11, C14, C15, C21, C26, C31, C34, C35, C40, C43, C44, C45, C51, C53, C54, C68, C78, C105, C106, C146 21-04726-01CAP 47PF +/- 5% / GRM 36 C0G 470 J50 C5, C6, C7, C25, C32, C46, C64, C84, C85, C97, C98, C99, C260, C262, C263, C264, C267, C271, C374 21-11026-01CAP 100PF +/- 5% / GRM 36 C0G 101 J50 C87, C8921-12026-02CAP(1005) 200PF +/- 5% / GRM 36 C0H 201 J25 C9421-12226-02CAP(1005) 220PF +/- 5% / GRM 36 C0G 221 J50 C7021-13327-01CAP 330PF +/- 10% / GRM 36 X7R 331 K50 C82, C10421-14727-01CAP 470PF +/- 10% / GRM 36 X7R 471 K50 C39, C72, C81, C92, C96, C103, C219, C223, C227, C231, C233, C235, C256, C370, C410 21-21027-01CAP 1000PF +/- 10% / GRM 36 X7R 102 K50 C86 21-22227-01CAP 2200PF +/- 10% / GRM 36 X7R 222 K50 C93, C315 21-24727-01CAP 4700PF +/- 10% / GRM 36 X7R 472 K50 C9121-25627-03CAP(1005) 5600PF +/- 10% / GRM 36 X7R 562 K25 C57, C60, C100, C101, C208, C209, C234, C236, C239, C241, C246, C248, C249, C252, C253, C312, C325 21-31027-01CAP 0.01uF +/- 10% / GRM 36 X7R 103 K16 C216, C220, C221, C224 21-32227-01CAP 0.022uF +/- 10% / GRM 36 X7R 223 K16 C88 21-36837-01CAP 0.068uF(1608) +/- 10% / GRM 39 X7R 683 K16 C90 21-38238-02CAP 0.082uF (1608) +/- 10% / GRM 39 X7R 823 K16 EXHIBIT 10 3 APPLICANT: MOTOROLA, INC. FCC ID: IHDT56DG1 C3, C4, C8, C12, C18, C20, C23, C30, C41, C42, C56, C58, C61, C66, C73, C77, C102, C148, C169, C202, C203, C206, C207, C210, C211, C212, C213,C214, C232,C238, C240, C242, C243, C244,C245, C247, C250, C251, C255, C300,C301, C304, C305, C313, C316, C319, C322, C337, C375, C400 21-41027-01 CAP(1005) 0.1uF +/- 10% / GRM 36 X5R 104 K10 C5521-00428-01CAP 0.47uF 80/- 20% / GRM 36 Y5V 474 Z10 C23721-40638-01CAP 0.68uF 80/- 20% / GRM 36 Y5V 684 Z6.3 C65, C215, C217, C254, C272, C320, C323, C326, C327, C333, C334, C335, C339 21-51028-03CAP(1005) 1uF 80/- 20% / GRM 36 Y5V 105 Z10 C201, C205, C302, C303, C372, C404 21-51038-03CAP 1uF (1608) 80/- 20% / GRM 39 Y5V 105 Z10 C40321-52237-01CAP 2.2uF (1608) +/- 10% /GRM 39 X5R 225 K6.3 C329, C33021-52248-04CAP 2.2uF (2012) 80/- 20% / GRM 40 Y5V 225 Z10 C74, C331, C33221-04747-02CAP 4.7uF (2012) +80/- 20% / GRM 40 Y5V 475 Z10 C59, C71, C95, C270, C328 21-61048-03CAP 10uF (2012) 80/- 20% / GRM 225 Y5V 106 Z10 C222, C314, C37321-62258-03CAP 22uF (3216) 80/- 20% / GRM 230 Y5V 226 Z10 C37121-64768-01CAP 47uF (3225) 80/- 20%/ GRM 235 Y5V 476 Z10 AR200, AR201, AR202 21-11047-01ARRAY CAP 100PF(2012) +/- 10% / ECJTVC1H101K C14121-61008-01TANTAL 10UF 6.3V +/-20% / TA-6R3TCML100M-PR L13124-00102-02IND 1.2NH +/-0.3NH / LL1005-FH1N2S L11024-00102-03IND 1.5NH +/-0.3NH / LL1005-FH1N5S L111, L126 , L139, L180 24-00202-01IND 2.2NH +/-0.3NH / LL1005-FH2N2S L106, L136 24-00402-01IND 4.7NH +/-0.3NH / LL1005-FH4N7S L14024-00502-01IND 5.6NH +/-0.3NH / LL1005-FH5N6S L102, L104, L109, L113, L127 24-00806-02IND 8.2NH 5% / LL1005-FH8N2J L105, L108, L13424-01006-02IND 10NH 5% / LL1005-FH10Nj L11224-01806-02IND 18NH 5% / LL1005-FH18NJ L100, L101, L114, L115 24-03306-…

Text truncated - open the document above for the full version.

APPLICANT: MOTOROLA, INC. FCC ID: IHDT56DG1 E E x x h h i i b b i i t t 1 1 1 1 P P a a g g e e 1 1 Exhibit 11: SAR Test Report IHDT56DG1 Date of test: Date of Report: 09/05/2003-09/09/2003 09/22/2003 Laboratory: Motorola Personal Communications Sector Product Safety & Compliance Laboratory 600 N. US Highway 45 Room: MW113 Libertyville, Illinois 60048 Test Responsible: Firass Badaruzzaman Senior RF Engineer Accreditation: This laboratory is accredited to ISO/IEC 17025-1999 to perform the following tests: Tests : Procedures: Electromagnetic Specific Absorption Rate ANSI/IEEE C95.1-1992, 1999 (SAR) IEEE C95.3-1991 IEEE P1528 (DRAFT) FCC OET Bulletin 65 (including Supplements A, B, C) Australian Communications Authority Radio Communications (Electromagnetic Radiation – Human Exposure) Standard 1999 CENELEC EN 50361 (2001) Simulated Tissue Preparation APP-0247 RF Power Measurement DOI-0876, 0900, 0902, 0904, 0915 On the following products or types of products: Wireless Communications Devices (Examples): Two Way Radios; Portable Phones (including Cellular, Licensed Non-Broadcast and PCS); Low Frequency Readers; and Pagers A2LA certificate #1651-01 Statement of Compliance: Motorola declares under its sole responsibility that portable cellular telephone FCC ID IHDT56DG1 to which this declaration relates, is in conformity with the appropriate General Population/Uncontrolled RF exposure standards, recommendations and guidelines (FCC 47 CFR §2.1093). It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted below: (none) ©Motorola, Inc. 2003 This test report shall not be reproduced except in full, without written approval of the laboratory. The results and statements contained herein relate only to the items tested. The names of individuals involved may be mentioned only in connection with the statements or results from this report. Motorola e…

Text truncated - open the document above for the full version.