IHDT6AB3moto tag

Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: May 23, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) FCC ID: IHDT6AB3 To Whom It May Concern, As required by section 2.911(d)(5)(i) of Commission’s rules (47 CFR), Motorola Mobility LLC certifies that, as of the date of the filing of the application, the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. As required by section 2.911(d)(5)(ii) of Commission’s rules (47 CFR), Motorola Mobility LLC certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Jeff Narducci Director, Global Regulatory Compliance [email protected]

Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: May 23, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Certification Designing a U.S. Agent for Service of Process Concerning “Covered” Equipment Pursuant to Section 1.50002 FCC ID: IHDT6AB3 To Whom It May Concern, As required by section 2.911(d)(7) of Commission’s rules (47 CFR), Motorola Mobility LLC acknowledge, consents and certifies that, as of the date of the filing of the application until this certification is revoked in writing by the applicant: • The applicant designates itself as the U.S. agent to accept service of process. • The physical U.S. address and email of the applicant as designated agent are as follows: Attention: Jeff Narducci Company: Motorola Mobility LLC Address: 222 W. Merchandize Mart Plaza, Chicago Il US FRN: 0004321311 Email: Jeff Narducci <[email protected]> • Applicant will remain as the designated agent for service for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. • The agent accepts the designation by Motorola Mobility LLC as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Sincerely, Jeff Narducci Director, Global Regulatory Compliance [email protected]

Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: May 23, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: IHDT6AB3 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting confidentiality for exhibits filed with the commission supporting the application of equipment authorization for those items referenced above. Motorola Mobility respectfully requests the Commission to withhold indefinitely from public disclosure the following attachments under Long-Term Confidentiality. ⚫ Schematic Diagrams ⚫ Block Diagrams ⚫ Part List ⚫ Operational Description ⚫ Tune-up Procedure The above listed documents contain detailed system and equipment descriptions that are proprietary and confidential information under Motorola trade secret protection. Public disclosure of above documents would be harmful to our company and would provide competitors an unfair advantage. This information is not made publicly available even after commercial release of the device. In additional to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We request the commission to grant short-term confidentiality request on the following attachments for 180 days after the grant as outlined in Public Notice DA 04-1705. ⚫ External Photos ⚫ Internal Photos ⚫ Test Setup Photos ⚫ User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. Sincerely, Jeff Narducci Director, Global Regulatory Compliance [email protected]

Motorola Mobility LLC 222 W. Merchandize Mart Plaza, Chicago Il US www.motorola.com Date: May 23, 2024 To whom it may concern, Please be notified that I, Jeff Narducci, have designated Jones Tsai of Sporton International Inc. and Dailihua of Motorola Mobility LLC as the persons being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out in their professional capacity by Jones Tsai of Sporton International Inc. and Dailihua of Motorola Mobility LLC in connection with all processes required for FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This authorization is limited to the following product, and shall remain in place until completion of the certification, or until revoked, whichever is earlier: FCC ID: IHDT6AB3 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please don’t hesitate to contact me. Sincerely yours, Jeff Narducci Director, Global Regulatory Compliance [email protected]

BACK Battery Compartment INSIDE BACK Battery Door INSIDE I C : 1 0 9 O - T 6 A B 3 F C C : I H D T 6 A B 3 X T 2 4 4 5 - 1 M F R : M O T O R O L A M O B I L I T Y , G U 1 4 6 F E , U K M A D E I N C H I N A SN:XXXXXXXX

Sporton International Inc. (Kunshan) Page Number : 1 of 6 TEL : +86-512-57900158 Report Issued Date : May 29, 2024 FCC ID : IHDT6AB3 Report Version : Rev. 02 RF Exposure Evaluation Report Report No. : FA441117 RF Exposure Evaluation Report APPLICANT : Motorola Mobility LLC EQUIPMENT : moto tag BRAND NAME : Motorola MODEL NAME : XT2445-1 FCC ID : IHDT6AB3 STANDARD : 47 CFR PART 2.1093 FCC KDB 447498 D01 v06 The product evaluation date was started from May 23, 2024 and completed on May 23, 2024. We, Sporton International Inc. (Kunshan), would like to declare that the device has been evaluated in accordance with 47 CFR Part 2.1093 and FCC KDB 447498 D01 v06, and pass the limit. Without written approval of Sporton International Inc. (Kunshan), the test report shall not be reproduced except in full. Approved by: Si Zhang Sporton International Inc. (Kunshan) No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China Sporton International Inc. (Kunshan) Page Number : 2 of 6 TEL : +86-512-57900158 Report Issued Date : May 29, 2024 FCC ID : IHDT6AB3 Report Version : Rev. 02 RF Exposure Evaluation Report Report No. : FA441117 Table of Contents 1. ADMINISTRATION DATA ........................................................................................................................... 4 1.1. Testing Laboratory ............................................................................................................................. 4 2. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 5 3. MAXIMUM RF TUNE UP POWER AMONG PRODUCTION UNITS .......................................................... 6 4. RF EXPOSURE EVALUATION ................................................................................................................... 6 Sporton International Inc. (Kunshan) Page Number : 3 of 6 TEL : +86-512-57900158 Report Issued Date : May 29, 2024 FCC ID : IHDT6AB3 Report Version : Rev. 02 RF Exposure Evaluation Report Report No. : FA441117 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA441117 Rev. 01 Initial issue of report May 24, 2024 FA441117 Rev. 02 Updated the UWB antenna gain value on page 5. May 29, 2024 Sporton International Inc. (Kunshan) Page Number : 4 of 6 TEL : +86-512-57900158 Report Issued Date : May 29, 2024 FCC ID : IHDT6AB3 Report Version : Rev. 02 RF Exposure Evaluation Report Report No. : FA441117 1. Administration Data 1.1. Testing Laboratory Sporton International Inc. (Kunshan) is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.02. Testing Laboratory Test Firm Sporton International Inc. (Kunshan) Test Site Location No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China TEL : +86-512-57900158 Test Site No. Sporton Site No. FCC Designation No. FCC Test Firm Registration No. SAR01-KS CN1257 314309 Applicant Company Name Motorola Mobility LLC Address 222 W,Merchandise Mart Plaza, Chicago IL 60654 USA Manufacturer Company Name Motorola Mobility LLC Address 222 W,Merchandise Mart Plaza, Chicago IL 60654 USA Sporton International Inc. (Kunshan) Page Number : 5 of 6 TEL : +86-512-57900158 Report Issued Date : May 29, 2024 FCC ID : IHDT6AB3 Report Version : Rev. 02 RF Exposure Evaluation Report Report No. : FA441117 2. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type moto tag Brand Name Motorola Model Name XT2445-1 FCC ID IHDT6AB3 Wireless Technology and Frequency Range Bluetooth: 2402 MHz ~ 2480 MHz UWB: 6489.6MHz & 7987.2MHz Mode Bluetooth LE : GFSK UWB: BPM-BPSK Antenna Type Bluetooth: IFA Antenna UWB: IFA Antenna Antenna Gain Bluetooth: 2.0 dBi UWB: 2.5 dBi for 6489.6MHz and 3.5 dBi for 7987.2MHz HW Version EVT2 SW Version 1.0.9 EUT Stage Identical Prototype Remark: 1. The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 2. The UWB output power is less than 1mW and exempt from power density testing. Comments and Explanations: 1. The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. 2. The maximum RF output tune up power, antenna gain also the safe distance used for evaluate RF exposure were declared by manufacturer. Sporton International Inc. (Kunshan) Page Number : 6 of 6 TEL : +86-512-57900158 Report Issued Date : May 29, 2024 FCC ID : IHDT6AB3 Report Version : Rev. 02 RF Exposure Evaluation Report Report No. : FA441117 3. Maximum RF Tune Up power among production units <Bluetooth> Mode Maximum Average Power (dBm) Bluetooth LE 8.5 4. RF Exposure Evaluation Mode Maximum Average Power (dBm) Bluetooth LE 8.5 Note: 1. Per KDB 447498 D01v06 the 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison Bluetooth Max Power (dBm) Separation Distance (mm) Frequency (GHz) exclusion thresholds 8.5 < 5 2.48 2.2 2. According to the EUT characteristic, UWB and Bluetooth can transmit simultaneously. Conclusion: Per KDB 447498 D01v06, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. The test exclusion threshold is 2.2 which is ≤ 3.0 for 1-g SAR, 1-g SAR and extremity SAR testing is not required, and complied with Specific Absorption Rate (SAR) for general population/uncontrolled exposure limits …

Text truncated - open the document above for the full version.

Antenna Test Report APPLICANT : Motorola Mobility LLC EQUIPMENT : TAG BRAND NAME : Motorola Page Number : 2 of 7 Antenna Report Table of Contents 1. Antenna information-------------------------------------------------------------------------------------------------------------------- 3 2. Antenna Peak Gain --------------------------------------------------------------------------------------------------------------------- 3 3. Gain Plots ---------------------------------------------------------------------------------------------------------------------------------- 5 Page Number : 3 of 7 Antenna Report 1. Antenna information Manufacturer: APOLLO FPC CO., LTD. Address: No.1, Building 5, Xinzhaofeng Industrial Zone, Fushan Industrial Park, Doumen District, Zhuhai City, Guangdong Province UWB Antenna model: YC0109007150S2 UWB Antenna type: IFA BLE Antenna model: YC0109007149S5 BLE Antenna type: IFA Test software name: AnTestPro99 Testing equipment: Multi probe antenna testing darkroom Calibration date: 20240301 Expiration date: 20240831 Signature of testing engineer: 2. Antenna Peak Gain Page Number : 4 of 7 Antenna Report Test / Position Free Space bands Frequency TX Antenna Peak Gain Ant 1 Ant 2 BT 2402-2480MHz 2 UWB CH5 6240-6739.2 MHz 2.5 UWB CH9 7737.6-8236.8 MHz 3.5 Page Number : 5 of 7 Antenna Report 3. Gain Plots BLE Page Number : 6 of 7 Antenna Report UWB CH5 Page Number : 7 of 7 Antenna Report UWB CH9

Sporton International Inc. (Kunshan) Page Number : 1 of 21 TEL : +86-512-57900158 Report Issued Date : May 28, 2024 FCC ID: IHDT6AB3 Report Version : Rev. 01 Report Template No.: BU5-FR15CBT4.0 Version 2.0 FCC RF Test Report Report No. : FR441117A FCC RF Test Report APPLICANT : Motorola Mobility LLC EQUIPMENT : moto tag BRAND NAME : Motorola MODEL NAME : XT2445-1 FCC ID : IHDT6AB3 STANDARD : FCC Part 15 Subpart C §15.247 CLASSIFICATION : (DTS) Digital Transmission System TEST DATE(S) : May 01, 2024 ~ May 23, 2024 We, Sporton International Inc. (Kunshan), would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (Kunshan), the test report shall not be reproduced except in full. Approved by: Jason Jia Sporton International Inc. (Kunshan) No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China Sporton International Inc. (Kunshan) Page Number : 2 of 21 TEL : +86-512-57900158 Report Issued Date : May 28, 2024 FCC ID: IHDT6AB3 Report Version : Rev. 01 Report Template No.: BU5-FR15CBT4.0 Version 2.0 FCC RF Test Report Report No. : FR441117A TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ...................................................................................................................................... 5 1.3 Product Feature of Equipment Under Test ........................................................................................ 5 1.4 Product Specification of Equipment Under Test ................................................................................ 5 1.5 Modification of EUT ........................................................................................................................... 5 1.6 Specification of Accessory ................................................................................................................. 6 1.7 Testing Location ................................................................................................................................ 6 1.8 Test Software ..................................................................................................................................... 6 1.9 Applicable Standards ......................................................................................................................... 6 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 7 2.1 Carrier Frequency Channel ............................................................................................................... 7 2.2 Test Mode .......................................................................................................................................... 8 2.3 Connection Diagram of Test System ................................................................................................. 9 2.4 Support Unit used in test configuration and system .......................................................................... 9 2.5 EUT Operation Test Setup ................................................................................................................ 9 2.6 Measurement Results Explanation Example ................................................................................... 10 3 TEST RESULT .......................................................................................................................................... 11 3.1 6dB and 99% Bandwidth Measurement .......................................................................................... 11 3.2 Output Power Measurement ............................................................................................................ 12 3.3 Power Spectral Density Measurement ............................................................................................ 13 3.4 Conducted Band Edges and Spurious Emission Measurement ..................................................... 14 3.5 Radiated Band Edges and Spurious Emission Measurement ........................................................ 15 3.6 Antenna Requirements .................................................................................................................... 19 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 20 5 MEASUREMENT UNCERTAINTY ............................................................................................................ 21 APPENDIX A. CONDUCTED TEST RESULTS APPENDIX B. RADIATED SPURIOUS EMISSION AND PLOTS APPENDIX C. DUTY CYCLE PLOTS APPENDIX D. SETUP PHOTOGRAPHS Sporton International Inc. (Kunshan) Page Number : 3 of 21 TEL : +86-512-57900158 Report Issued Date : May 28, 2024 FCC ID: IHDT6AB3 Report Version : Rev. 01 Report Template No.: BU5-FR15CBT4.0 Version 2.0 FCC RF Test Report Report No. : FR441117A REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR441117A Rev. 01 Initial issue of report May 28, 2024 Sporton International Inc. (Kunshan) Page Number : 4 of 21 TEL : +86-512-57900158 Report Issued Date : May 28, 2024 FCC ID: IHDT6AB3 Report Version : Rev.…

Text truncated - open the document above for the full version.