IHDT6QE1P1500

1 motorola power pack micro 1500 For product safety information, visit: Para obtener información de seguridad del producto, visite: www.motorola.com/powerpacklegalguide Key ring Llavero Cap release indent Hendidura de liberacion de la tapa Micro USB connector Conector micro USB Speaker Micro USB input to charge power pack Entrada micro USB para cargar la unidad de alimentacion Status light Luz de estado Power button Boton de encendido Altavoz 2 Charge the Power Pack Micro Cargar la Power Pack Micro 3 Set up the Power Pack Micro Configure la Power Pack Micro Use Motorola Connect 1Download the free Motorola Connect app from the Google Play Store to your Android 4.3 or higher device. 2Press and hold the Power Pack Micro Power button for 4 seconds until the status light begins to flash blue. 3Touch the image of your Power Pack Micro within the app to pair. Ti p : To connect to a new device, unpair your current device using the "remove" option in the Motorola Connect motorola connect 4 app. Then, turn off your Power Pack Micro (press and hold button) and repeat steps 2 and 3 on your new device. Utilice Motorola Connect 1Descargue la aplicación gratuita Motorola Connect de la tienda de Google Play a su Android 4.3 o a un dispositivo mayor. 2Mantenga oprimido el botón de la Power Pack Micro Power durante 4 segundos hasta que la luz de estado comience a destello azul. 3Toque la imagen de su Power Pack Micro dentro de la aplicación para poner emparejar. Consejo: para conectarse a un dispositivo nuevo, desvincule el dispositivo actual con la opción “eliminar” en la aplicación Motorola Connect. Luego, apague su Power Pack Micro (mantenga oprimido el botón) y repita los pasos 2 y 3 en su nuevo dispositivo. 5 Use Power Pack To Charge Phone Utilice la Power Pack para cargar el teléfono Note: If your device does not start charging, press the Power button. Even if your Power Pack is out of power, the find Phone or Power Pack feature will still work for up to a month. Nota: si su dispositivo no comienza a cargar, oprima el botón de Encendido. Incluso si la Power Pack no tiene potencia, la característica de Encontrar el teléfono (Find Phone) o de Encontrar el Power Pack (Find Power Pack) funcionará por hasta un mes. 6 Find Phone Encontrar el teléfono Find My Phone: Quickly press the Power Pack Micro Power button twice. Your phone beeps and turns on. Note: You will need the Motorola Connect app. Encontrar mi teléfono: presione rápidamente el botón de Encendido de la Power Pack Micro. Su teléfono hará un bip y se encenderá. Nota: necesitará la aplicación Motorola Connect. Long time no see... touch anywhere to cancel 7 Find Power Pack Encontrar el Power Pack Find My Power Pack Micro: Open the Motorola Connect app, and locate the alert for your Power Pack Micro. If in range, your Power Pack Micro will begin to beep. Note: You will need the Motorola Connect app. Encontrar mi Power Pack Micro: abra el la aplicación Motorola Connect y localice la alerta para su Power Pack Micro. Si esta en el área de alcance, su Power Pack Micro empezará a emitir un bip. Nota: necesitará la aplicación Motorola Connect. moto connect 8 Safety, Regulatory & Legal Allergens Glass Parts Motorola Mobility avoids using known allergens in our products. From time to time, trace amounts of an allergen may be added during manufacture of a device or device component that could cause discomfort for some individuals. This approach is common for many types of products. We recommend that you monitor any products that may be in prolonged contact with your skin, and remove them if you experience skin irritation. European Union Directives Conformance Statement EU Conformance The following CE compliance information is applicable to Motorola products that carry one of the following CE marks: Hereby, Motorola declares that this product is in compliance with: •The essential requirements and other relevant provisions of Directive 1999/5/EC •All other relevant EU Directives For products that support Wi-Fi 802.11a (as defined in your product information): This device is restricted to indoor use when operating in the 5.15 to 5.25 GHz (802.11a) Wi-Fi frequency band. The following gives an example of a typical Type Name: 0168 Type Name 9 You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte (in English only). To find your DoC, enter the Product Approval Number from your product’s label in the “Search” bar on the website. Regulatory authorities within the EU may obtain compliance information by writing to: Product Safety and Compliance, Motorola Mobility UK Ltd., Redwood, Crockford Lane, Chineham Business Park, Basingstoke, RG24 8WQ, UNITED KINGDOM. FCC Notice to Users FCC Not ice The following statement applies to all products that bear the FCC logo and/or FCC ID on the product label. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. See 47 CFR Sec. 15.105(b). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and the receiver. •Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. This device complies wi…

Text truncated - open the document above for the full version.

2014-06-24 To whom it may concern, Letter of Agency I, an officer of Motorola Mobility, LLC. do hereby authorize Intertek Testing Services (Mr. Shawn Xing / Billy Li) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2007) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Mathew Li Certification Engineer

Re: Request for confidentiality Applicant: Motorola Mobility, LLC. FCC ID: IHDT6QE1 To whom it may concern, Permanent Confidentiality Request is hereby submitted by Motorola Mobility, LLC. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:  Schematics  Detailed Block diagrams  Detailed Operational/Functional Description Short-term Confidentiality Request is hereby submitted by Motorola Mobility, LLC. to withhold from public review for a period of 45 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 45 days from the date of Authorization:  Test setup photos  External photos  Internal photos  User manual Rationale for request for confidentiality: Motorola Mobility, LLC. has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality:Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.][Short term confidentiality:Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] If you have questions or need further information, please contact the undersigned. Sincerely, Certification Engineer Weifang GoerTek Electronics Co.,Ltd

FCC ID: IHDT6QE1 Motorola Mobility LLC., 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA Pag e 13B - 1 11 June 2014 Authorization of Agent Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 RE: Grantee Code IHD. Authorization: I, John Lewczak, the FCC contact for Grantee Code “IHD,” hereby authorize the following company (agent) to act on behalf of Motorola Mobility LLC. for the application specified below. This includes: • Form 731, Attestation Statement Exhibit, and Confidentiality Request Signatures. • Technical Contact. • Non-Technical Contact. • Test Firm Contact Information. Notifications of grant issuance should be routed to the applicant of record for Grantee Code “IHD,” as should any audit requests concerning this device. Authorized Agent: Mathew Li Weifang GoerTek Electronics Co.,Ltd Gaoxin 2 Road,Free Trade Zone,Weifang,Shandong,261205,P.R.China. Specific Application: FCC ID: IHDT6QE1 Contact Information: Please contact me by telephone at (954) 723-6272, or by e-mail ( [email protected]), if there are questions or additional information needed concerning this authorization Regards, FCC Liaison Motorola Mobility LLC. 8000 W. Sunrise Blvd, Suite A Plantation, FL 33322

FCC ID: IHDT6QE1 Motorola Mobility LLC., 8000 W. Sunrise Blvd, Suite A; Plantation, FL 33322, USA Pag e 13A - 1 11 June 2014 Power of Attorney RE: Power of Attorney. We, the undersigned Motorola Mobility LLC hereby authorize Weifang GoerTek Electronics Co.,Ltd to act on our behalf in all matters relating to any and all processes required in obtaining FCC Part 15 approval for FCC ID: IHDT6QE1, and any communication required with the national authority. Any and all acts carried out by GoerTek Corporation on our behalf shall have the same effects as acts of our own, subject to this Power of Attorney. This Power of Attorney will be effective between 11 June 2014 and 31 July 2014, and will expire thereafter. If you have any questions regarding this authorization, please don’t hesitate to contact us. Sincerely yours, FCC Liaison Motorola Mobility LLC 8000 W. Sunrise Blvd, Suite A Plantation, FL 33322 Phone: (954) 723-6272 FAX: (954) 337-2377 Mail: [email protected]

External Photo

DESIGNED BY MOTOROLA MODEL: P1500 SPNXXXXA FCC ID: IHDT6QE1 INPUT - ENTRADA: 4.75 - 5.25V 0 - 1A OUTPUT - SALIDA: 5V 1A BUILT-IN BATTERY: 1530/1580 mAh 5.8/6.0 Wh (min/typ) MADE IN CHINA YYXXX Motorola Condential + Proprietary Quartz Regulation artwork laser etchedbottom view front view * logo and text are to be centered on housing silk print *please reference CMF for decoration inlay flat *43.68 +/-0.15mm X 101.57 +/- 0.15mm 0.56mm +/- 0.06mm nominal thickness logo and text are to be centered on housing 24.66 24.66 R0.60 43.68 101.57 12mm 36mm

Internal Photo

1 INTERTEK TESTING SERVICES RF Exposure The Equipment under Test (EUT) is a P1500 model: P1500. It is powered by DC 3.8V. For more detail information please refer to the user manual. Antenna Type: Integral antenna. Antenna Gain: -2.05dBi. The nominal conducted output power specified: 2.05dBm ±3dB. Test radiated output power: -3dBm ~ 3dBm Modulation Type: GFSK. According to the KDB 447498: T he maximun conducted output power specified is 5.05dBm = 3.2mW The source- based time-averaging conducted output power = 3.2* Duty Cycle mW= 3.2mW T he SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.480) mW = 9.5 m W Since the source-based time-averaging conducted output power is well below the SAR low threshold level, so the EUT is considered to comply with SAR requirement without testing. Transmitter Duty Cycle Calculation The test signal of the EUT is Continuous emission, so the Duty Cycle is 100%. FCC ID: IHDT6QE1

• The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. • This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results referenced from this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. • For Terms And Conditions of the services, it can be provided upon request. • The evaluation data of the report will be kept for 3 years from the date of issuance. TRF No.: FCC 15C_TX_b R eport No.: 140611006SZN-001 Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Website: www.china.intertek-etlsemko.com M otorola Mobility LLC Application For Certification FCC ID: IHDT6QE1 P1500 Model: P1500 2.4GHz Transceiver Report No.: 140611006SZN-001 W e hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [10-1-13] Prepared and Checked by: Approved by: Sign on file Leo Lai Project Engineer Andy Yan Project Engineer Date: July 28, 2014 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b Report No.: 140611006SZN-001 FCC ID: IHDT6QE1 i LIST OF EXHIBITS INTRODUCTION EXHIBIT 1: General Description EXHIBIT 2: System Test Configuration EXHIBIT 3: Emission Results EXHIBIT 4: Equipment Photographs EXHIBIT 5: Product Labelling EXHIBIT 6: Technical Specifications EXHIBIT 7: Instruction Manual EXHIBIT 8: Miscellaneous Information EXHIBIT 9: Test Equipment List INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b Report No.: 140611006SZN-001 FCC ID: IHDT6QE1 ii MEASUREMENT/TECHNICAL REPORT Motorola Mobility LLC M odel: P1500 FCC ID: IHDT6QE1 This report concerns (check one:) Original Grant X Class II Change Equipment Type: DXX - Part 15 Low Power Communication Device Transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator − the new 47 CFR [10-1-13 Edition] provision. Report prepared by: Leo Lai Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, Block D, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Phone: (86 755) 8614 0661 Fax: (86 755) 8601 6751 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b Report No.: 140611006SZN-001 FCC ID: IHDT6QE1 iii Ta ble of Contents 1.0 General Description ................................................................................................. 2 1.1 Product Description ................................................................................................. 2 1.2 Related Submittal(s) Grants .................................................................................... 2 1.3 Test Methodology .................................................................................................... 2 1.4 Test Facility ............................................................................................................ 2 2.0 System Test Configuration ...................................................................................... 4 2.1 Justification ............................................................................................................. 4 2.2 EUT Exercising Software ......................................................................................... 4 2.3 Special Accessories ................................................................................................ 4 2.4 Equipment Modification ........................................................................................... 4 2.5 Measurement Uncertainty ....................................................................................... 5 2.6 Support Equipment List and Description .................................................................. 5 3.0 E mission Results ..................................................................................................... 7 3.1 Radiated Test Results ............................................................................................. 8 3.1.1 Field Strength Calculation ..................................................................................... 8 3.1.2 Radiated Emission Configuration Photograph ....................................................... 9 3.1.3 Radiated Emissions .............................................................................................. 9 3.1.4 Transmitter Spurious Emissions ......................................................................... 12 3 .2 Conducted Emission at Mains Termina .................................................................. 16 3.2.1 Conducted Emissions Configuration Photograph ................................................ 16 3.2.2 Conducted Emissions ........................................................................................ 16 4.0 Equipment Photographs ......................................…

Text truncated - open the document above for the full version.

Bandedge Plot

20dB BW Plot

Test Setup Photo –Radiated Emission

Test Setup Photo – Conducted Emission