IYGPTB600

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 55 of 81 Exhibit 8 Exhibit 8: User’s Manual A copy of the user’s manual is enclosed below. The compliance statement for the PTB600 is located on the front cover of the manual. COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 56 of 81 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 57 of 81 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 58 of 81 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 59 of 81 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 60 of 81 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 61 of 81 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 62 of 81 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 63 of 81 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 64 of 81 Exhibit 8

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 80 of 81 Exhibit 13 Exhibit 13: Cover Letters March 19, 1999 FEDERAL COMMUNICATIONS COMMISSION Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: Enclosed is a FCC Part 15, Subpart C, Section 15.247 Certification application for the Spectralink Corporation Model PTB600, FCC ID: IYGPTB600 Please let me know if I can be of further assistance. Sincerely yours, COMMUNICATION CERTIFICATION LABORATORY Joseph W. Jackson V.P. Marketing COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 81 of 81 Exhibit 13 Request for Confidentiality Letter

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 4 of 81 Exhibit 3 Exhibit 3: Photographs of Overall Appearance Front exterior view COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 5 of 81 Exhibit 3 Back exterior view (with battery installed) COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 6 of 81 Exhibit 3 Back exterior view (without battery installed)

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 1 of 81 Exhibit 1 Exhibit 1: FCC ID Label Equipment Identification Label In accordance with the requirements of Sections 15.19 (a), 2.925 and 2.926 of the FCC Rules, the following information will be permanently affixed to the Spectralink Corporation Model PTB600 as shown in the photograph on the following page. Due to the size of the handset the compliance statement is contained on the front page of the user’s manual. COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 2 of 81 Exhibit 1 Photograph showing the label placement

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 65 of 81 Exhibit 9 Exhibit 9: Internal Photographs Inside View – Side A with LCD display installed COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 66 of 81 Exhibit 9 Inside View – Side A with LCD display removed COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 67 of 81 Exhibit 9 Inside View – Side B with RF cans installed COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 68 of 81 Exhibit 9 Inside View – Side B with RF cans removed

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 22 of 81 Exhibit 6 Exhibit 6: Test Report TEST REPORT FROM: COMMUNICATION CERTIFICATION LABORATORY 1940 W. Alexander Street Salt Lake City, Utah 84119-2039 Type of Report: Certification TEST OF: PTB600 FCC ID: IYGPTB600 To FCC PART 15.247, Subpart C Test Report Serial No: 73-6763 Applicant: Spectralink Corporation 5755 Central Avenue Boulder, CO 80301 Date(s) of Test: March 15 - 16, 1999 Issue Date: March 19, 1999 Equipment Receipt Date: February 23, 1999 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 23 of 81 Exhibit 6 CERTIFICATION OF ENGINEERING REPORT This report has been prepared by Communication Certification Laboratory to determine compliance of the device described below with the requirements of FCC PART 15.247, Subpart C. This report may be reproduced in full, partial reproduction may only be made with the written consent of the laboratory. The results in this report apply only to the sample tested. -Applicant:Spectralink Corporation -Manufacturer:Spectralink Corporation -Brand Name:SPECTRALINK -Model Number:PTB600 -FCC ID:IYGPTB600 On this 19 th day of March 1999, I, individually, and for Communication Certification Laboratory, certify that the statements made in this engineering report are true, complete, and correct to the best of my knowledge, and are made in good faith. COMMUNICATION CERTIFICATION LABORATORY Checked by: William S. Hurst, P.E. Vice President Tested by: Roger J. Midgley EMC Engineering Manager COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 24 of 81 Exhibit 6 SECTION 1. CLIENT INFORMATION AND RESPONSIBLE PARTY: 1.1 Client Information: Company Name: Spectralink Corporation 5755 Central Avenue Boulder, CO 80301 Contact Name:John Chabon Title: COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 25 of 81 Exhibit 6 SECTION 2. EQUIPMENT UNDER TEST (EUT) 2.1 Identification of EUT: Trade Name:SPECTRALINK Model Name or Number:PTB600 Serial Number:N/A Options Fitted:None Country of Manufacture:U.S.A. 2.2 Description of EUT: See theory of operation (Exhibit 12). This report covers the transmitter only the receiver is covered under a separate verification report. 2.3 Modification Incorporated/Special Accessories on EUT: There were no modifications or special accessories required to comply with the specification. 2.4 EUT and Support Equipment: The FCC ID numbers for all the EUT and support equipment used during the test (including inserted cards) are listed below: Brand Name Model Number Serial No. FCC ID Number DescriptionName of Interface Ports/Interface Cables BN: SPECTRALINK MN: PTB600 SN: N/A IYGPTB600Frequency Hopping Spread Spectrum Handset (EUT) N/A COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 26 of 81 Exhibit 6 SECTION 3. TEST SPECIFICATION, METHODS & PROCEDURES 3.1 Test Specification: Title:FCC PART 15.247, Subpart C (47 CFR 15). Limits and methods of measurement of radio interference characteristics of radio frequency devices. Operation within the bands 902-928 MHz, 2400-2483.5 MHz and 5725- 5850 MHz. Purpose of Test: The tests were performed to demonstrate Initial compliance. 3.2 Methods & Procedures: 3.2.1 '' 15.247 (a)Operation under the provisions of this section is limited to frequency hopping and direct sequence spread spectrum intentional radiators that comply with the following provisions: (1)Frequency hoping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hopping channel, whichever is greater. The system shall hop to channel frequencies that are selected at the system-hopping rate from a pseudorandomly ordered list of hopping frequencies. Each frequency must be used equally on the average by each transmitter. The system receivers shall have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shall shift frequencies in synchronization with the transmitting signals. (i)Frequency hopping systems operating in the 902 - 928 MHz band shall use at least 50 hopping frequencies. The maximum allowed 20 dB bandwidth of the hopping channel is 500 kHz. The average time of occupancy on any frequency shall not be greater than 0.4 seconds within a 20 second period. (ii)Frequency hopping systems operating in the 2400 – 2483.5 MHz and the 5725 – 5850 MHz bands shall use at least 75 hopping frequencies. The maximum allowed 20 dB bandwidth of the hopping channel is 1 MHz. The average time of occupancy on any frequency shall not be greater than 0.4 seconds within a 30 second period. COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 27 of 81 Exhibit 6 (2)For direct sequence systems, the minimum 6 dB bandwidth shall be at least 500 kHz. (b)The maximum peak output power of the transmitter shall not exceed 1 watt. If transmitting antennas of directional gain greater than 6 dBi are used, the power shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. (c)In any 100 kHz bandwidth outside these frequency bands, the radio frequency power that is produced by the modulation products of the spreading sequence, the information sequence and the carrier frequency shall be either at least 20 dB below that in any 100 kHz bandwidth within the band that contains the highest level of the desired power or shall not exceed the general levels specified in ' 15.209 (a), whichever results in the lesser attenuation. All other emissions outside these bands shall not exceed the general radiated emission limits specified in ' 15.209 (a). (d) For direct sequence system, the transmitted power density averaged over any 1 second interval shall not be greater than 8 dBm in any 3 kHz bandwidth within these bands. (e)The processing gain of a direct sequence system shall be at least 10 dB. The processing gain s…

Text truncated - open the document above for the full version.

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6763 FCC ID: IYGPTB600 Page 54 of 81 Exhibit 7 Exhibit 7: Test Set-Up Photographs Front view of worst case radiated emissions