JFZT220CIFrequency-agile True Diversity UHF Wireless System

2000 Series Frequency-agile True Diversity UHF Wireless System Installation and Operation 2000 Series Installation and Operation 2 Important information Warning: To prevent fire or shock hazard, do not expose this apparatus to rain or moisture. Caution: • Do not expose this apparatus to drips or splashes. • To avoid electric shock, do not open the cabinet. • Refer servicing to qualified personnel only. • Do not expose this apparatus to excessive heat such as sunshine, fire or the like. • Do not subject this apparatus to strong impact. • This apparatus should be located close enough to the AC outlet so that you can easily grasp the AC adapter at any time. • In case of emergency, disconnect the AC adapter quickly. • Do not place any objects filled with liquids, such as vases, on this apparatus. • To prevent fire, do not place any naked flame sources (such as lighted candles) on this apparatus. • Do not install this apparatus in a confined space such as a bookcase or similar unit. • Install this apparatus only in the place where ventilation is good. • The rating label is put on the bottom of this apparatus. For customers in the USA FCC Notice Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. RF Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR). Contact: Responsible Company: Audio-Technica U.S., Inc. Address: 1221 Commerce Drive, Stow, Ohio 44224, USA Tel: 330-686-2600 For customers in Canada ISED statement CAN ICES-003(B)/NMB-003(B) CAN RSS-Gen/CNR-Gen This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. Notice to individuals with implanted cardiac pacemakers or AICD devices: Any source of RF (radio frequency) energy may interfere with normal functioning of the implanted device. All wireless microphones have low-power transmitters (less than 0.05 watts output) which are unlikely to cause difficulty, especially if they are at least a few inches away. However, since a “body-pack” mic transmitter typically is placed against the body, we suggest attaching it at the belt, rather than in a shirt pocket where it may be immediately adjacent to the medical device. Note also that any medical-device disruption will cease when the RF transmitting source is turned off. Please contact your physician or medical-device provider if you have any questions, or experience any problems with the use of this or any other RF equipment. RF Interference Please note that wireless frequencies are shared with other radio services. According to Federal Communications Commission regulations, “Wireless microphone operations are unprotected from interference from other licensed operations in the band. If any interference is received by any Government or non-Government operation, the wireless microphone must cease operation...” If you need assistance with operation or frequency selection, please contact your dealer or Audio-Technica. Extensive wireless information also is available at www.audio-technica.com. Thank you for choosing an Audio-Technica professional wireless system. You have joined thousands of other satisfied customers who have chosen our products because of their quality, performance and reliability. This Audio-Technica wireless microphone system is the successful result of years of design and manufacturing experience. Each 2000 Series wireless system provides a choice of 10 PLL synthesized UHF frequencies in one of five UHF frequency ranges, available for flexible performance in a wide variety of regions worldwide: Frequency Range Band D 656.125 – 678.500 MHz Band I 487.125 – 506.500 MHz Band U 606.500 – 629.900 MHz The band letter reference at the end of 2000 Series Stock Numbers indicates what band system/component operates in. For simplicity, model numbers used throughout this manual will reference only the basic model number without the band indications. 2000 Series Installation and Operation 3 Each wireless system in…

Text truncated - open the document above for the full version.

2000 Series Quick Start Guide / Frequency-agile True Diversity UHF Wireless System Guide de démarrage rapide / Système sans fil UHF True Diversity agile en fréquence Kurzanleitung / Frequenzagiles True Diversity UHF-Drahtlossystem Guida rapida / Sistema wireless UHF True Diversity ad agilità di frequenza Guía de inicio rápido / Sistema inalámbrico UHF True Diversity con agilidad de frecuencias Guia de início ráp ido / Sistema sem fio UHF de diversidade verdadeira com agilidade de frequência Краткое руководство по установке / Беспроводная система УВЧ с технологией разнесения каналов True Diversity с быстрой перестройкой частоты 快速启动指南 / UHF 频段 捷变频分集式无线系统 快速入門指南 / 入耳式無線監聽系統 English ■Important information Warning: To prevent fire or shock hazard, do not expose this apparatus to rain or moisture. Caution: • Do not expose this apparatus to drips or splashes. • To avoid electric shock, do not open the cabinet. • Refer servicing to qualified personnel only. • Do not expose this apparatus to excessive heat such as sunshine, fire or the like. • Do not subject this apparatus to strong impact. • This apparatus should be located close enough to the AC outlet so that you can easily grasp the AC adapter at any time. • In case of emergency, disconnect the AC adapter quickly. • Do not place any objects filled with liquids, such as vases, on this apparatus. • To prevent fire, do not place any naked flame sources (such as lighted candles) on this apparatus. • Do not install this apparatus in a confined space such as a bookcase or similar unit. • Install this apparatus only in the place where ventilation is good. • The rating label is put on the bottom of this apparatus. Battery caution: • Keep batteries out of the reach of children. • Observe correct polarity as marked. • Do not expose the battery to excessive heat such as sunshine, fire or the like. • Always consider the environmental issues and follow local regulations when disposing of batteries. • Remove depleted battery immediately. • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Use only disposable LR06 (AA) alkaline or Ni-MH batteries. • Do not use new and old batteries at the same time. • Do not use different battery types or models. • Do not use a leaking battery. If battery leakage occurs, avoid contact with skin. If contact occurs, immediately wash thoroughly with soap and water. • If battery leakage comes into contact with your eyes, immediately flush with water and seek medical attention. For customers in the USA FCC Notice Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: − Reorient or relocate the receiving antenna. − Increase the separation between the equipment and receiver. − Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. − Consult the dealer or an experienced radio/TV technician for help. RF Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR). Contact: Responsible Company: Audio-Technica U.S., Inc. Address: 1221 Commerce Drive, Stow, Ohio 44224, USA Tel: 330-686-2600 For customers in Canada ISED statement CAN ICES-003(B)/NMB-003(B) CAN RSS-Gen/CNR-Gen This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. Français ■Informations importantes Avertissement: Pour éviter tout risque de choc électrique ou d’incendie, n’exposez pas cet appareil à la pluie ou à l’humidité. Attention: • Protégez cet appareil des projections et des gouttes d’eau. • Pour éviter tout risque de choc électrique, n’ouvrez pas le boîtier. • Confiez tous travaux d’entretien à un technicien qualifié. • N’exposez pas cet équipement à des températures excessives, telles que celles de la lumière directe du soleil, d’une flamme ou autres. • Ne soumettez pas cet équipement à de forts impacts. • Cet appareil doit être placé à proximité de la prise secteur afin que vous puissiez facilement vous saisir de l'adaptateur secteur à tout moment. • En cas d'urgence, débranchez l'adaptateur secteur au plus vite. • Ne placez pas d’objets remplis de liquide tels que des vases, sur l’appareil. • Pour éviter tout risque d’incendie, ne placez pas de flammes nues (t…

Text truncated - open the document above for the full version.

Annex A No.1-5888/23-01-01 July 04, 2023 DescriptionExternal photographs of EUT This document is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Authorized Tobias Wittenmeier Testing Manager Radio Labs cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-5888/23-01-01 Page 1 of 3 Photo 1 Photo 2 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-5888/23-01-01 Page 2 of 3 Photo 3 - END OF DOCUMENT - cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-5888/23-01-01 Page 3 of 3

FCC ID : JFZT220CI MADE IN MALAYSIA IC : 1752B-T220CI MODEL : AT W-T220cI FREQ. : 487.125-506.500 MHz BAT T.: LR6, AA 2, 3 V ATW-T220c I band MODEL SEAL P# 234501290-01-01 2022.07.15 SIZE : W34 x H7 mm K Color

5$7,1*/$%(/ &(8.&$ PRGHOQDPH)&&,',& $ * ) ( ' & %  ὀグ $7ࢢ࣮ࣝࣉ〇ရ⎔ቃရ(休)ᇶ‽࡟㐺ྜ࡜ࡇࡿࡍ 127( &RPSO\ZLWKWKH$XGLR7HFKQLFD*URXSHQYLURPHQWDOTXDOLW\VWDQGDUGIRUSURGXFWV '(6&5,37,21 ,668(1R '$7( 1$0( 5(9 RYHUXSWR RYHUXSWR RYHUXSWR RYHUXSWR XSWR 3HUPLVVLEOHGHYLDWLRQV RIEDVLFVL]HUDQJH>PP@ 7ROHUDQFHFODVV s s s s ss ss ss ss ss s 7ROHUDQFHVIRUEURNHQHGJHVDQGDQJXODUGLPHQVLRQV-,6%P FRDUFHPHGLXPILQH  0$7(5,$/ '(6,*1(''5$:1&+(&.('$33529('6&$/( \BKRVKLQR 02'(/1$0(3$571$0( 3&2'( ),1,6+ 6800$5< 6,=(2)0$7(5,$/ $(4('<(1F   7FB$66<B $7:7F     

Annex B No.1-5888/23-01-01 July 04, 2023 DescriptionInternal photographs of EUT This document is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Authorized Tobias Wittenmeier Testing Manager Radio Labs cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-5888/23-01-01 Page 1 of 5 Photo 1 Photo 2 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-5888/23-01-01 Page 2 of 5 Photo 3 Photo 4 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-5888/23-01-01 Page 3 of 5 Photo 5 Photo 6 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-5888/23-01-01 Page 4 of 5 Photo 7 - END OF DOCUMENT - cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-5888/23-01-01 Page 5 of 5

Test Report No. 14389824H-B-R1 Page 1 of 68 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 SAR TEST REPORT Test Report No. 14389824H-B-R1 Customer Audio-Technica Corporation Description of EUT HANDHELD TRANSMITTER Model Number of EUT ATW-T220cI FCC ID JFZT220CI Test Regulation FCC47CFR 2.1093 Test Result Complied Issue Date June 29, 2023 Remarks The highest reported SAR Body (1 g) : 0.05 W/kg Limbs (10 g) : Excluded Representative Test Engineer Approved By Hisayoshi Sato Engineer Satofumi Matsuyama Engineer CERTIFICATE 5107.02 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan, Inc. There is no testing item of "Non-accreditation". Report Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 22.0 Test Report No. 14389824H-B-R1 Page 2 of 68 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 ANNOUNCEMENT REVISION HISTORY Original Test Report No. 14389824H-B This report is a revised version of 14389824H-B. 14389824H-B is replaced with this report. Revision Test report No. Date Page Revised Contents - (Original) 14389824H-B April 25, 2023 - 1 14389824H-B-R1 June 29, 2023 Cover Page -Correction of highest SAR value in Remarks The highest reported SAR(1g) Body : 0.05 W/kg → The highest reported SAR Body (1 g) : 0.05 W/kg Limbs (10 g) : Excluded Section 4.2: Stand-alone SAR result -Addition of “Limbs: Excluded” in the table. -Correction of below explanatory note. * Details are shown at section 12. → * Details of SAR results are shown at section 12 and refer to SAR test exclusion of limbs are section 6.2. Section 6.2: SAR test exclusion considerations according to KDB 447498 D01 -Addition of a table for “SAR exclusion calculations for antenna <50mm from the user for Limbs SAR”. -Addition of below sentence. For 10-g extremity SAR c) [(7.5ꞏ50)/(√f(GHz))) + (test separation distance - 50 mm)ꞏ(f(MHz)/150)] mW at > 100 MHz and ≤ 1500 MHz d) [(7.5ꞏ50)/(√f(GHz))) + (test separation distance - 50 mm)ꞏ10] mW at > 1500 MHz and ≤ 6 GHz -Addition of a table for “SAR exclusion calculations for antenna >50mm from the user for Limbs SAR”.  This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc.  The results in this report appl y only to the sample tested. (Laboratory was not involved in sampling.)  This sample tested is in compliance with the limits of the above re gulation.  The test results in this test report are traceable to the national or international standards.  This test report must not be used by the customer to claim product certification, approval, or endorsement b y the A2LA accreditation body.  This test report covers SAR technical requirements. It does not cover administrative issues such as Manual or non-SAR test related Requirements. (if applicable)  The all test items in this test report are conducted b y UL Japan, Inc. Ise EMC Lab.  The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan, Inc. has been accredited.  The information provided from the customer for this report is identified in Section 1.  For test report (s) referred in this report, the latest version (including any revisions) is always referred. Test Report No. 14389824H-B-R1 Page 3 of 68 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Reference: Abbreviations (Including words undescribed in this report) AAN Asymmetric Artificial Network GPS Global Positioning System AC Alternating Current Hori. Horizontal AM Amplitude Modulation ICES Interference-Causing Equipment Standard AMN Artificial Mains Network I/O Input/Output Amp, AMP Amplifier IEC International Electrotechnical Commission ANSI American National Standards Institute IEEE Institute of Electrical and Electronics Engineers Ant, ANT Antenna IF Intermediate Frequency AP Access Point ILAC International Laboratory Accreditation Conference ASK Amplitude Shift Keying ISED Innovation, Science and Economic Development Canada Atten., ATT Attenuator ISN Impedance Stabilization Network AV Average ISO International Organization for Standardization BPSK Binary Phase-Shift Keying JAB Japan Accreditation Board BR Bluetooth Basic Rate LAN Local Area Network BT Bluetooth LCL Longitudinal Conversion Loss BT LE Bluetooth Low Energy LIMS Laboratory Information Management System BW BandWidth LISN Line Impedance Stabilization Network C.F Correction Factor MRA Mutual Recognition Arrangement Cal Int Calibration Interval N/A Not Applicable CAV CISPR AV NIST National Institute of Standards and Technology CCK Complementary Code Keying NS No signal detect. CDN Coupling Decoupling Network NSA Normalized Site Attenuation Ch., CH Channel OBW Occupied BandWidth CISPR Comite International Special des Perturbations Radioelectriques OFDM Orthogonal Frequency Division Multiplexing Corr. Correction PER Packet Error Rate CPE Customer premise equipment PK Peak CW Continuous Wave P LT long-term flicker severity DBPSK Differential BPSK POHC(A) Partial Odd Harmonic Current DC Direct Current Pol., Pola. Polarization DET Detector PR-ASK Phase Reversal ASK D-factor Distance factor P ST short-term flicker severity Dmax maximum absolute voltage change during an observation period QAM Quadrature Amplitude Modulation DQPSK Differential QPSK QP Quasi-Peak DSSS Direct Sequence Spread Spectrum QPSK Quadrature Phase Shift Keying DUT Device Under Test r.m.s., RMS Root Mean Square EDR Enhanced Data Rate RBW Resolution BandWidth e.i.r.p., EIRP Equivalent Isotropically Radiated Power RE Radio Equipment EM clamp Electromagnetic clamp REV Reverse EMC ElectroMagnetic Compatibility RF Radio Frequency EMI ElectroMagnetic Interference RFID Radio Frequency Identifier EMS ElectroMagnetic Susceptibility RNSS Radio Navigation Satellite Service EN European Norm RSS Radio Standards Specifications e.r.p., ERP Effective Rad…

Text truncated - open the document above for the full version.

TEST REPORT Test report no.: 1-5888_23-01-0 2 Testing laboratory Applicant cetecom advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://cetecomadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate starting with the registration number: D-PL-12076-01. Audio-Technica Corporation 2-46-1 Nishi-naruse, Machida 194-8666 Tokyo / JAPAN Phone: -/- Contact: Fumio Kamimura e-mail: [email protected] Manufacturer Audio-Technica Corporation 2-46-1 Nishi-naruse, Machida 194-8666 Tokyo / JAPAN Test standard/s FCC - Title 47 CFR Part 74 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 74 - Experimental radio, auxiliary, special broadcast and other program distributional services RSS - 210 Issue 10 Spectrum Management and Telecommunications Radio Standards Specification - Licence-Exempt Radio Apparatus: Category I Equipment For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Frequency-agile True Diversity UHF Wireless System Model name: ATW-T220cl FCC ID: JFZT220CI ISED certification number: 1752B-T220CI Frequency: 487.125 MHz – 506.500 MHz Technology tested: proprietary Antenna: Integrated antenna Power supply: 2.4 V to 3.2 V DC by battery Temperature range: +5°C to +45°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: p.o. Christoph Schneider Tobias Wittenmeier Lab Manager Testing Manager Radio Labs Radio Labs Test report no.: 1-5888_23-01-02 © cetecom advanced GmbH Page 2 of 34 1 Table of contents 1 Table of contents ....................................................................................................................................... 2 2 General information ................................................................................................................................... 3 2.1 Notes and disclaimer ...................................................................................................................... 3 2.2 Application details .......................................................................................................................... 3 2.3 Test laboratories sub-contracted .................................................................................................... 3 3 Test standard/s, references and accreditations ......................................................................................... 4 4 Reporting statements of conformity – decision rule .................................................................................. 5 5 Test environment ....................................................................................................................................... 6 6 Test item ................................................................................................................................................... 6 6.1 General description ......................................................................................................................... 6 6. 2 Additional information .................................................................................................................... 6 7 Description of the test setup ...................................................................................................................... 7 7.1 Shielded fully anechoic chamber ..................................................................................................... 8 7.2 Conducted measurements normal and extreme conditions ............................................................. 9 8 Sequence of testing ................................................................................................................................. 10 8.1 Sequence of testing radiated spurious 30MHz to 12.75GHz .......................................................... 10 9 Measurement uncertainty ........................................................................................................................ 11 10 Summary of measurement results ....................................................................................................... 12 11 Additional comments ........................................................................................................................... 13 12 Measurement results ........................................................................................................................... 14 12.1 Transmitter output power .......................................................................................................... 14 12.2 Occupied bandwidth .................................................................................................................. 17 12.3 Transmitter frequency stability .................................................................................................. 20 12.4 Transmitter unwanted emissions (radiated) ............................................................................... 21 12.5 Modulation characteristics ........................................................................................................ 24 12.6 Necessary bandwidth (BN) for analogue systems ...................................................................... 25 12.7 Frequency modulation ............................................................................................................... 29 13 Glossary ............................................................…

Text truncated - open the document above for the full version.

Test Report No. 14389824H-B-R1 Page 64 of 68 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 APPENDIX 4: Photographs of test setup Photographs of EUT Photograph A1: Front Photograph A4: Rear Photograph A3: Top Photograph A6: Bottom Photograph A5: Right Photograph A2: Left Test Report No. 14389824H-B-R1 Page 65 of 68 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Antenna position Unit: mm Bottom→ Bottom→ Bottom→ Front view Left view Rear view Bottom view ←Top ←Top ←Top Top view ↓Right ↓Front ↓Left ↑Left ↑Rear ↑Right Red area is antenna Test Report No. 14389824H-B-R1 Page 66 of 68 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Photographs of setup Photo graph B1: Body, Front, 0 mm (Front view) Photograph B3: Body, Rear, 0 mm (Front view) Photograph B2: Body, Front, 0 mm (Side view) Photograph B4: Body, Rear, 0 mm (Side view) Test Report No. 14389824H-B-R1 Page 67 of 68 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Photo graph B5: Body, Left, 0 mm (Front view) Photograph B7: Body, Right, 0 mm (Front view) Photograph B6: Body, Left, 0 mm (Side view) Photograph B8: Body, Right, 0 mm (Side view) Test Report No. 14389824H-B-R1 Page 68 of 68 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Photo graph B9: Body, Bottom, 0 mm (Front view) Photograph B10: Body, Bottom, 0 mm (Side view) End of Report

Annex C No.1-5888/23-01-01 July 04, 2023 DescriptionTest set-up photographs This document is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Authorized Tobias Wittenmeier Testing Manager Radio Labs cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-5888/23-01-01 Page 1 of 4 Photo 1 Photo 2 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-5888/23-01-01 Page 2 of 4 Photo 3 Photo 4 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-5888/23-01-01 Page 3 of 4 Photo 5 Photo 6 - END OF DOCUMENT - cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-5888/23-01-01 Page 4 of 4