JNZMR0089Wireless Mouse

Important Safety, Compliance and Warranty Information Informations importantes concernant la sécurité, la mise en conformité et la garantie English Read Manual Before Product Use. BATTERY WARNING!: Improperly replaced batteries may present a risk of leak or explosion and personal injury. Risk of fire or explosion if the battery is replaced by an incorrect type. Ensure batteries are installed correctly by following the instructions provided. Mistreated rechargeable batteries may present a risk of fire or chemical burn. Do not disassemble or expose to conducting materials, moisture, liquid, or heat above 54°C (130°F). A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended periods. Do not short circuit. Your device may contain an internal, rechargeable battery that is not replaceable. Battery life varies with usage. Non-operational batteries should be discarded according to local laws. If no laws or regulations govern, dispose of your device in a waste bin for electronics. Keep batteries away from children. Class 1 Laser product: This product complies with International Standards IEC/EN 60825-1: 2014, Class 1 Laser Product, and also complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Maximum power of 716 microwatts CW, Emitted wavelength is 832-865 nm; Operating temperature between 0°C and 40°C. WARNING! Use of controls, adjustments or performance of procedures beyond those specified herein may result in hazardous radiation exposure. WARNING! Laser Radiation. Viewing the laser output with magnifying optical instruments within a 100mm distance may pose an eye hazard. WARNING! Avoid prolonged direct eye and/or skin contact with the laser aperture. May result in potential burn injury. The product contains Class 1 LED. Operating temperature between 0° C and 40° C. Class 1M Laser product: This device complies with International Standard IEC/EN 60825-1:2014, Class 1M Laser Product, and also complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Emission of diverging beam of minimum +/-2° of infrared user-invisible light; Maximum power of 1.4 milliwatts CW, Emitted wavelength is 832-865 nm; Operating temperature between 0°C and 40°C. INVISIBLE LASER RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LASER PRODUCT Use Guidelines: Safe & Proper Use of Your Product –Do not open or modify the product except for battery removal and replacement. –Do not disassemble or attempt to service this product because there is a risk of radiation exposure, which could injury you. –Do not direct the infrared/laser beam at anyone’s eye or a reflective object. –Do not immerse product in any liquid or expose to heat or moisture. –If product is exposed to out-of-range temperature environments, power off the device until temperature has stabilized within the specified operating temperature range. –Use only Logitech-provided power supply devices with this product. Do not modify the power supply. Do not charge your product during an electrical storm. –Use the product with listed/certified ITE computers and accessories. –This is not a Children’s Product and is not intended for use by children under 14 years old. –Long periods of repetitive motion using the product may be associated with nerve, tendon or muscle injury in your hands, wrists, arms, shoulders, neck or back. See a qualified health professional for pain, numbness, weakness, swelling, burning, cramping, or stiffness. Also, read guidelines at www.logitech.com/comfort. –This product is safe under normal and reasonably foreseeable misuse operating conditions. If the product is operating improperly, contact Logitech support. Product must be returned to Logitech for any service or repair. –Any changes or modifications to the product that are not expressly approved by Logitech may void the user’s authority to operate the equipment and your warranty. –Refer to product Quick Start Guide for use instructions. –This product complies with relevant legal requirements for Restriction of Hazardous Substances (RoHS) and management of waste electronic and electrical equipment (WEEE) in the EU, Turkey, Ukraine, United Arab Emirates, India, China and Taiwan. For RoHS and WEEE information, go to www.logitech.com/compliance. Batteries, electronic and electrical equipment should not be disposed of with household waste. Wherever possible, they should be segregated and brought to an appropriate collection point to enable recycling and avoid potential impacts on the environment and human health. For more information, contact your local authorities or place of purchase, or visit www. logitech.com/recycling. FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates , uses and can radiate radio frequency energy. And, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged t…

Text truncated - open the document above for the full version.

> 2 m ~ 20 cm abc G11 G3 G9 G4 G1 G8 G7 G6 G5 G10 G2 G502 Setup Guide | Setup Guide logitechG.com/support G1: G2: G3: G4: G5: G6: G7: G8: G9: G10: G11: 400 DPI 620-010737 00A © 2021 Logitech. Logitech, Logitech G and the Logitech and Logitech G logos are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other countries. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. © 2021 Logitech. Logitech, Logitech G and the Logitech and Logitech G logos are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other countries. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. 31 2 PLEASE READ THE INSTRUCTIONS BEFORE OPERATING THE PRODUCT PLEASE READ THE INSTRUCTIONS BEFORE OPERATING THE PRODUCT

Date: 2021-05-25 FCC ID:JNZMR0089 To t h e a t t e n t i o n o f Federal Communications Commission Authorization and Evaluation Division Declaration letter for label requirement The label is permanent affixed in the Dongle compartment. The EUT need to connect with Dongle and could be operating. The users can see the label during the installation process. The compartment can be opened without any special tools. Sincerely yours, ------------------------------------------------------------ Paul Zahra / Regulatory Compliance Manager LOGITECH FAR EAST LTD. Tel: 5107135436 Fax: 5107125436 E-mail: [email protected]

May 10, 2021 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: JNZMR0089 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant of Equipment Authorization. External Photos Internal Photos User Manual Test Setup photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards ------------------------------------------------------------- Paul Zahra / Regulatory Compliance Manager LOGITECH FAR EAST LTD. Tel: 5107135436 Fax: 5107125436 E-mail: [email protected]

Date: 2021-05-14 FCC ID:JNZMR0089 AUTHORIZATION LETTER To Whom It May Concern: LOGITECH FAR EAST LTD. hereby authorizes Debby Lin / Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Debby Lin / Senior Specialist of BV CPS Taoyuan on LOGITECH FAR EAST LTD.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ------------------------------------------------------------- Paul Zahra / Regulatory Compliance Manager LOGITECH FAR EAST LTD. Tel: 5107135436 Fax: 5107125436 E-mail: [email protected]

Page 1/8 CONSTRUCTION PHOTOS OF EUT EUT With LED type Page 2/8 Page 3/8 Page 4/8 Page 5/8 EUT Without LED type Page 6/8 Page 7/8 Page 8/8

LABEL & Label LOCATION The label will be permanently affixed at a conspicuous location on the device. FCC ID: JNZMR0089 IC: 4418A-MR0089 Dongle CAGE

Page 1/18 CONSTRUCTION PHOTOS OF EUT EUT With LED type Page 2/18 Page 3/18 Page 4/18 Page 5/18 Page 6/18 Page 7/18 Page 8/18 Page 9/18 Page 10/18 EUT Without LED type Page 11/18 Page 12/18 Page 13/18 Page 14/18 Page 15/18 Page 16/18 Page 17/18 Page 18/18

Report No.: SABDKG-WTW-P21040533 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SABDKG-WTW-P21040533 FCC ID: JNZMR0089 Test Model: MR0089 Received Date: Apr. 21, 2021 Test Date: Apr. 21, 2021 Issued Date: May 19, 2021 Applicant: LOGITECH FAR EAST LTD. Address: 7700 Gateway Boulevard Newark California United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SABDKG-WTW-P21040533 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Evaluation Result .................................................................................................................................. 5 3 SAR Test Exclusion Thresholds .......................................................................................................... 6 4 Conclusion ............................................................................................................................................ 6 Report No.: SABDKG-WTW-P21040533 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SABDKG-WTW-P21040533 Original release. May 19, 2021 Report No.: SABDKG-WTW-P21040533 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Wireless Mouse Brand: logitech G Test Model: MR0089 Sample Status: Engineering sample Applicant: LOGITECH FAR EAST LTD. Test Date: Apr. 21, 2021 Standards: FCC Part 2 (Section 2.1093) KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: May 19, 2021 Claire Kuan / Specialist Approved by : , Date: May 19, 2021 Clark Lin / Technical Manager Report No.: SABDKG-WTW-P21040533 Page No. 5 / 6 Report Format Version: 6.1.1 2 Evaluation Result Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  .  .  The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SABDKG-WTW-P21040533 Page No. 6 / 6 Report Format Version: 6.1.1 3 SAR Test Exclusion Thresholds Channel Frequency (MHz) Avg. Power (mW) (dBm) 1 2403 4.943 6.94 40 2442 4.887 6.89 77 2479 4.742 6.76 For SAR Test Exclusion Thresholds Frequency (MHz) Max Avg. Power (dBm) Max Avg. Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value …

Text truncated - open the document above for the full version.

Report No.: RFBDKG-WTW-P21040533 Page No. 1 / 40 Report Format Version: 6.1.1 FCC Test Report (GFSK) Report No.: RFBDKG-WTW-P21040533 FCC ID: JNZMR0089 Test Model: MR0089 Received Date: Apr. 21, 2021 Test Date: Apr. 21 to 23, 2021 Issued Date: May 19, 2021 Applicant: LOGITECH FAR EAST LTD. Address: 7700 Gateway Boulevard Newark California United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RFBDKG-WTW-P21040533 Page No. 2 / 40 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT (GFSK) ................................................................................................... 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards and References ............................................................. 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments ................................................................................................................................ 16 4.1.3 Test Procedures ................................................................................................................................. 18 4.1.4 Deviation from Test Standard ............................................................................................................ 19 4.1.5 Test Setup .......................................................................................................................................... 19 4.1.6 EUT Operating Conditions ................................................................................................................. 20 4.1.7 Test Results ....................................................................................................................................... 21 4.2 Conducted Emission Measurement .................................................................................................. 26 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 26 4.2.2 Test Instruments ................................................................................................................................ 26 4.2.3 Test Procedures ................................................................................................................................. 27 4.2.4 Deviation from Test Standard ............................................................................................................ 27 4.2.5 Test …

Text truncated - open the document above for the full version.

Reference No.: BDKG-WTW-P21040533 Page No. 1 / 4 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Reference No.: BDKG-WTW-P21040533 Page No. 2 / 4 RADIATED EMISSION TEST (Below 1GHz) Reference No.: BDKG-WTW-P21040533 Page No. 3 / 4 RADIATED EMISSION TEST (Above 1GHz) Reference No.: BDKG-WTW-P21040533 Page No. 4 / 4