JNZMR0104Wireless Mouse

English Read Manual Before Product Use. BATTERY WARNING!: Improperly replaced batteries may present a risk of leak or explosion and personal injury. Risk of fire or explosion if the battery is replaced by an incorrect type. Ensure batteries are installed correctly by following the instructions provided. Mistreated rechargeable batteries may present a risk of fire or chemical burn. Do not disassemble or expose to conducting materials, moisture, liquid, or heat above 54° C (130° F). A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended periods. Do not short circuit. Your device may contain an internal, rechargeable battery that is not replaceable. Battery life varies with usage. Non-operational batteries should be discarded according to local laws. If no laws or regulations govern, dispose of your device in a waste bin for electronics. Keep batteries away from children. Class 1 Laser product: This product complies with International Standards IEC/EN 60825-1: 2014, Class 1 Laser Product, and also complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Maximum power of 716 microwatts CW, Emitted wavelength is 832-865 nm; Operating temperature between 0°C and 40°C. WARNING! Use of controls, adjustments or performance of procedures beyond those specified herein may result in hazardous radiation exposure. WARNING! Laser Radiation. Viewing the laser output with magnifying optical instruments within a 100mm distance may pose an eye hazard. WARNING! Avoid prolonged direct eye and/or skin contact with the laser aperture. May result in potential burn injury. The product contains Class 1 LED. Operating temperature between 0° C and 40° C. Class 1M Laser product: This device complies with International Standard IEC/EN 60825-1:2014, Class 1M Laser Product, and also complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Emission of diverging beam of minimum +/-2° of infrared user-invisible light; Maximum power of 1.4 milliwatts CW, Emitted wavelength is 832-865 nm; Operating temperature between 0°C and 40°C. INVISIBLE LASER RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LASER PRODUCT Use Guidelines: Safe & Proper Use of Your Product –Do not open or modify the product except for battery removal and replacement. –Do not disassemble or attempt to service this product because there is a risk of radiation exposure, which could injury you. –Do not direct the infrared/laser beam at anyone’s eye or a reflective object. –Do not immerse product in any liquid or expose to heat or moisture. –If product is exposed to out-of-range temperature environments, power off the device until temperature has stabilized within the specified operating temperature range. –Use only Logitech-provided power supply devices with this product. Do not modify the power supply. Do not charge your product during an electrical storm. –Use the product with listed/certified ITE computers and accessories. –This is not a Children’s Product and is not intended for use by children under 14 years old. –Long periods of repetitive motion using the product may be associated with nerve, tendon or muscle injury in your hands, wrists, arms, shoulders, neck or back. See a qualified health professional for pain, numbness, weakness, swelling, burning, cramping, or stiffness. Also, read guidelines at www.logitech.com/comfort. –This product is safe under normal and reasonably foreseeable misuse operating conditions. If the product is operating improperly, contact Logitech support. Product must be returned to Logitech for any service or repair. –Any changes or modifications to the product that are not expressly approved by Logitech may void the user’s authority to operate the equipment and your warranty. –Refer to product Quick Start Guide for use instructions. Important Safety, Compliance and Warranty Information Informations importantes concernant la sécurité, la mise en conformité et la garantie –This product complies with relevant legal requirements for Restriction of Hazardous Substances (RoHS) and management of waste electronic and electrical equipment (WEEE) in the EU, Turkey, Ukraine, United Arab Emirates, India, China and Taiwan. For RoHS and WEEE information, go to www.logitech.com/compliance. Batteries, electronic and electrical equipment should not be disposed of with household waste. Wherever possible, they should be segregated and brought to an appropriate collection point to enable recycling and avoid potential impacts on the environment and human health. For more information, contact your local authorities or place of purchase, or visit www.logitech.com/recycling. FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates , uses and can radiate radio frequency energy. And, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged …

Text truncated - open the document above for the full version.

3 PRO WIRELESS Setup Guide | Guide d’installation www.logitechG.com/support/pro-wireless 1 2 PRO WIRELESS R L 620-011981.002 > 2 m ~ 20 cm MN: MR0104

Date: 2022-11-08 FCC ID: JNZMR0104 To the attention of Federal Communications Commission Authorization and Evaluation Division Declaration letter for label requirement The label is permanent affixed in the Dongle cage. The EUT need to connect with Dongle and could be operating. The users can see the label during the installation process. The cage can be opened without any special tools. Sincerely yours, ------------------------------------------------------------- Paul Zahra / Regulatory Compliance Manager LOGITECH FAR EAST LTD. Tel: 5107135436 Fax: 5107125436 E- mail: [email protected]

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: JNZMR0104 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant of Equipment Authorization. External Photos Internal Photos User Manual Test Setup photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Paul Zahra / Senior manager, Compliance Engineering LOGITECH FAR EAST LTD. Tel: +1-510-713-5436 E- mail: [email protected] 11/06/2022

Date: 2022-11-08 FCC ID: JNZMR0104 AUTHORIZATION LETTER To Whom It May Concern: LOGITECH FAR EAST LTD. hereby authorizes Debby Lin / Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Debby Lin / Senior Specialist of BV CPS Taoyuan on LOGITECH FAR EAST LTD.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Paul Zahra / Senior manager, Compliance Engineering LOGITECH FAR EAST LTD. Tel: +1-510-713-5436 E- mail: [email protected]

Reference No.: BDKG-WTW-P22100236_EXT Page 1/4 CONSTRUCTION PHOTOS OF EUT Reference No.: BDKG-WTW-P22100236_EXT Page 2/4 Reference No.: BDKG-WTW-P22100236_EXT Page 3/4 Reference No.: BDKG-WTW-P22100236_EXT Page 4/4 USB to Micro USB cable

Dongle Cage LABEL & Label LOCATION The label will be permanently affixed at a conspicuous location on the device. FCC ID : JNZMR0104 IC : 4418A-MR0104

Reference No.: BDKG-W TW-P22100236_INT Page 1/13 CONSTRUCTION PHOTOS OF EUT Reference No.: BDKG-W TW-P22100236_INT Page 2/13 Reference No.: BDKG-W TW-P22100236_INT Page 3/13 Reference No.: BDKG-W TW-P22100236_INT Page 4/13 Antenna Reference No.: BDKG-W TW-P22100236_INT Page 5/13 Reference No.: BDKG-W TW-P22100236_INT Page 6/13 Reference No.: BDKG-W TW-P22100236_INT Page 7/13 Reference No.: BDKG-W TW-P22100236_INT Page 8/13 Reference No.: BDKG-W TW-P22100236_INT Page 9/13 Reference No.: BDKG-W TW-P22100236_INT Page 10/13 Battery (Model: AHB521630PJT-05 or 533-000208) Reference No.: BDKG-W TW-P22100236_INT Page 11/13 Battery (Model: 521630 or 533-000211) Reference No.: BDKG-W TW-P22100236_INT Page 12/13 Reference No.: BDKG-W TW-P22100236_INT Page 13/13

Report No.: MFBDKG-WTW-P22090467 Page No. 1 / 9 Report Format Version: 7.1.0 RF EXPOSURE REPORT CERTIFICATE OF CONFORMITY FCC Rule Part: FCC Part 2 (Section 2.1093) Report No.: MFBDKG-WTW-P22100236 FCC ID: JNZMR0104 Product: Wireless Mouse Brand: logitech G Model No.: MR0104 Received Date: 2022/9/15 Test Date: 2022/10/26 Issued Date: 2022/11/14 Applicant: LOGITECH FAR EAST LTD. Address: 7700 Gateway Boulevard Newark California United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 Approved by: , Date: 2022/11/14 May Chen / Manager This test report consists of 9 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Cherry Chuo / Specialist This report is governed by, and incorporates by ref erence, the Conditions of Testing as posted at the date of issuance of this report at http://w w w.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended f or your exclusive use. Any copying or replication of this report to or f or any other person or entity, or use of our name or trademark, is permitted only w ith our prior w ritten permission. This report sets f orth our f indings solely w ith respect to the test samples identif ied herein. The results set f orth in this report are not indicative or representative of the quality or characteristics of the lot f rom w hich a test sample w as taken or any similar or identical product unless specif ically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the inf ormation that you provided to us. Measurement uncertainty is only provided upon request f or accredited tests. Statements of conf ormity are based on simple acceptance criteria w ithout taking measurement uncertainty into account, unless otherwise requested in w riting. You have 60 days f rom date of issuance of this report to notif y us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, how ever, that such notice shall be in w riting and shall specif ically address the issue you w ish to raise. A f ailure to raise such issue w ithin the prescribed time shall constitute your unqualif ied acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBDKG-WTW-P22090467 Page No. 2 / 9 Report Format Version: 7.1.0 Table of Contents Release Control Record ...........................................................................................................................................3 1 Certificate .......................................................................................................................................................4 2 Applicable RF Exposure Limit ........................................................................................................................5 3 Applicable Evaluation Criteria ........................................................................................................................6 4 Test Results....................................................................................................................................................7 4.1 RF Exposure ................................................................................................................................................ 7 5 Conclusion .....................................................................................................................................................8 6 Information of the Testing Laboratories .........................................................................................................9 Report No.: MFBDKG-WTW-P22090467 Page No. 3 / 9 Report Format Version: 7.1.0 Release Control Record Issue No. Description Date Issued MFBDKG-WTW-P22100236 Original release. 2022/11/14 Report No.: MFBDKG-WTW-P22090467 Page No. 4 / 9 Report Format Version: 7.1.0 1 Certificate Product: Wireless Mouse Brand: logitech G Test Model: MR0104 Sample Status: Engineering sample Applicant: LOGITECH FAR EAST LTD. Test Date: 2022/10/26 FCC Rule Part: FCC Part 2 (Section 2.1093) Standard: KDB 447498 D04 Interim General RF Exposure Guidance v01 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Report No.: MFBDKG-WTW-P22090467 Page No. 5 / 9 Report Format Version: 7.1.0 2 Applicable RF Exposure Limit § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part within the frequency range of 100 kHz to 6 GHz (inclusive). (b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatialaverage SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit for occupational/…

Text truncated - open the document above for the full version.

Report No.: AGBDKG-WTW-P22100236 Page No. 1 / 10 Report Format Version:6.1.2 Antenna Gain Measurement Report Report No.: AGBDKG-WTW-P22100236 Model No.: MR0104 Received Date: 2022/9/15 Test Date: 2022/11/16 Issued Date: 2022/11/18 Applicant: LOGITECH FAR EAST LTD. Address: 7700 Gateway Boulevard Newark California United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Prepared by : , Date: 2022/11/18 Vivian Huang / Specialist Approved by : , Date: 2022/11/18 May Chen / Manager This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: AGBDKG-WTW-P22100236 Page No. 2 / 10 Report Format Version:6.1.2 Table of Contents Release Control Record .................................................................................................................................... 3 1 EUT Antenna System Description ........................................................................................................ 4 1.1 Antenna Information ............................................................................................................................. 4 2 2D Antenna Pattern Measurement ....................................................................................................... 4 2.1 Test Location ......................................................................................................................................... 4 2.2 Test Measurement procedure ............................................................................................................... 4 2.3 Test Setup Diagram @ Fully Anechoic Chamber ................................................................................. 4 2.4 Test Setup Diagram for EUT ................................................................................................................. 5 2.5 Test Instruments .................................................................................................................................... 5 2.6 Measurement Uncertainty ..................................................................................................................... 5 2.7 Test Procedure ...................................................................................................................................... 6 2.8 Test Result ............................................................................................................................................ 6 2.9 2D Pattern Test Plots ............................................................................................................................ 7 3 Appendix - Information of the Testing Laboratories ............................................................................ 10 Report No.: AGBDKG-WTW-P22100236 Page No. 3 / 10 Report Format Version:6.1.2 Release Control Record Issue No. Description Date Issued AGBDKG-WTW-P22100236 Original release. 2022/11/18 Report No.: AGBDKG-WTW-P22100236 Page No. 4 / 10 Report Format Version:6.1.2 1 EUT Antenna System Description 1.1 Antenna Information Antenna Net Gain (dBi) Frequency Range (GHz) Antenna Type Connector Type 2.02 2.4~2.4835 PIFA None 2 2D Antenna Pattern Measurement 2.1 Test Location 2D antenna pattern measurement in Fully Anechoic Chamber 2.2 Test Measurement procedure CISPR 16-1-6 ANSI 63.10-2013 clause 13 KDB 412172 D01 Determining ERP and EIRP v01r01 2.3 Test Setup Diagram @ Fully Anechoic Chamber The 2D antenna pattern measurement is using the test system (refer to Figure 1). The EUT is positioned on center of turntable, for Free Space only in fully anechoic chamber. Data (Raw Value) is recorded using the spectrum analyzer at each position. Figure 1. 2D antenna pattern test system. Report No.: AGBDKG-WTW-P22100236 Page No. 5 / 10 Report Format Version:6.1.2 2.4 Test Setup Diagram for EUT Controlling software (RF Sample with Receiver [Number Lock]) has been activated to set the EUT on specific status. Please refer to the attached file (Test Setup Photo) 2.5 Test Instruments Description Manufacturer Model No. Serial No. Calibrated Date Calibrated Until PXA Signal Analyzer(3 Hz to 50 GHz) Keysight N9030A MY54490570 2022/6/20 2023/6/19 Software BVADT Antenna Pattern V6.3 NA NA NA Antenna Tower & T…

Text truncated - open the document above for the full version.

Report No.: RFBDKG-WTW-P22100236 Page No. 1 / 43 Report Format Version: 6.1.1 Reference No.: FCC Test Report Report No.: RFBDKG-WTW-P22100236 FCC ID: JNZMR0104 Test Model: MR0104 Received Date: 2022/9/15 Test Date: 2022/10/17 ~ 2022/10/31 Issued Date: 2022/11/14 Applicant: LOGITECH FAR EAST LTD. Address: 7700 Gateway Boulevard Newark California United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBDKG-WTW-P22100236 Page No. 2 / 43 Report Format Version: 6.1.1 Reference No.: Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal ................................................................................................................... 11 3.4 Description of Support Units ............................................................................................................. 12 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards and References ............................................................. 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments ................................................................................................................................ 16 4.1.3 Test Procedures ................................................................................................................................. 18 4.1.4 Deviation from Test Standard ............................................................................................................ 18 4.1.5 Test Setup .......................................................................................................................................... 19 4.1.6 EUT Operating Conditions ................................................................................................................. 20 4.1.7 Test Results ....................................................................................................................................... 21 4.2 Conducted Emission Measurement .................................................................................................. 29 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 29 4.2.2 Test Instruments .............................................................................…

Text truncated - open the document above for the full version.

Antenna test setup photo:

Reference No.: BDKG-WTW-P22100236-TSup Page No. 1 / 5 Reference No.: PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Reference No.: BDKG-WTW-P22100236-TSup Page No. 2 / 5 Reference No.: RADIATED EMISSION TEST (Below 1GHz) Reference No.: BDKG-WTW-P22100236-TSup Page No. 3 / 5 Reference No.: Reference No.: BDKG-WTW-P22100236-TSup Page No. 4 / 5 Reference No.: RADIATED EMISSION TEST (Above 1GHz) Reference No.: BDKG-WTW-P22100236-TSup Page No. 5 / 5 Reference No.: