JNZMR0112Wireless Mouse

English Read Manual Before Product Use. BATTERY WARNING!: Improperly replaced batteries may present a risk of leak or explosion and personal injury. Risk of fire or explosion if the battery is replaced by an incorrect type. Ensure batteries are installed correctly by following the instructions provided. Mistreated rechargeable batteries may present a risk of fire or chemical burn. Do not disassemble or expose to conducting materials, moisture, liquid, or heat above 54° C (130° F). A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended periods. Do not short circuit. Your device may contain an internal, rechargeable battery that is not replaceable. Battery life varies with usage. Non-operational batteries should be discarded according to local laws. If no laws or regulations govern, dispose of your device in a waste bin for electronics. Keep batteries away from children. Class 1 Laser product: This product complies with International Standards IEC/EN 60825-1: 2014, Class 1 Laser Product, and also complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Maximum power of 716 microwatts CW, Emitted wavelength is 832-865 nm; Operating temperature between 0°C and 40°C. CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION WARNING! Use of controls, adjustments or performance of procedures beyond those specified herein may result in hazardous radiation exposure. WARNING! Avoid prolonged direct eye and/or skin contact with the laser aperture. May result in potential burn injury. The product contains Class 1 LED. Operating temperature between 0° C and 40° C. Use Guidelines: Safe & Proper Use of Your Product –Do not open or modify the product except for battery removal and replacement. –Do not disassemble or attempt to service this product because there is a risk of radiation exposure, which could injury you. –Do not direct the infrared/laser beam at anyone’s eye or a reflective object. –Do not immerse product in any liquid or expose to heat or moisture. –If product is exposed to out-of-range temperature environments, power off the device until temperature has stabilized within the specified operating temperature range. –Use only Logitech-provided power supply devices with this product. Do not modify the power supply. Do not charge your product during an electrical storm. –Use the product with listed/certified ITE computers and accessories. –This is not a Children’s Product and is not intended for use by children under 14 years old. –Long periods of repetitive motion using the product may be associated with nerve, tendon or muscle injury in your hands, wrists, arms, shoulders, neck or back. See a qualified health professional for pain, numbness, weakness, swelling, burning, cramping, or stiffness. Also, read guidelines at www.logitech.com/comfort. –This product is safe under normal and reasonably foreseeable misuse operating conditions. If the product is operating improperly, contact Logitech support. Product must be returned to Logitech for any service or repair. –Any changes or modifications to the product that are not expressly approved by Logitech may void the user’s authority to operate the equipment and your warranty. –Refer to product Quick Start Guide for use instructions. Logitech Compliance. The product complies with all applicable requirements for Restriction of Hazardous Substances (RoHS) and Waste Electronic and Electrical Equipment (WEEE). For Product Safety, EMC, RF, Energy, RoHS and WEEE information, go to www.logitech.com/compliance. Maintenance is not required for product compliance. Packaging, batteries, electronic and electrical equipment and their accessories should not be disposed of with household waste. Wherever possible, they should be segregated and brought to an appropriate collection point to enable recycling and avoid potential impacts on the environment and human health. For more information, contact your local authorities or place of purchase, or visit www.logitech.com/recycling. FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates , uses and can radiate radio frequency energy. And, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. Warning: Where shielded interface cables or accessories have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC. Changes or modifications to product not expressly approved by Logitech, Inc could void your right to…

Text truncated - open the document above for the full version.

M275 / M280 / M330 / M331 / B330 620-012697 00A 21 www.logitech.com/ support/m280 3 ON Project Date File Name P/N InksKaluga QSG Insert 6 October 2023 Kaluga 620-012697 00A QSG Insert PB1.ai 620-012697 Rev.00A DielineFinish Notesn/a Print size Trim size 101.6mm x 101.6mm 101.6mm x 101.6mm FontsLogitech Brown Pro Dieline (does not print) Black

LOGITECH FAR EAST LTD. #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Date: 2023-12-18 FCC ID: JNZ MR0 112 To the attention of Federal Communications Commission Authorization and Evaluation Division Declaration letter for label requirement The label is permanent affixed in the battery cage. The EUT need the battery to operate. The users can see the label during the installation process. The cage can be opened without any special tools. Sincerely yours, ------------------------------------------------------------- Paul Zahra / Senior Manager, Compliance engineering LOGITECH FAR EAST LTD. Tel: 5107135436 Fax: 5107125436 E-mail: [email protected]

Date: [2023-12-18] FCC ID: JNZMR0112 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing LOGITECH FAR EAST LTD. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing LOGITECH FAR EAST LTD. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------------------- Paul Zahra / Senior Manager, Compliance Engineering LOGITECH FAR EAST LTD. Tel: +1-510-713-5436 E-mail: [email protected]

Date: 2023-12-18 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation FCC ID: JNZMR0112 To whom it may concern: FCC US Agent Agent Company Name: Logitech, Inc. FCC FRN: 0005921077 Agent Contact Name: Paul Zahra Agent US Address: 3930 North First Street, San Jose, California 95134 Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Logitech Far East, Ltd. (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely, Paul Zahra Senior Manager, Compliance Engineering Logitech, Inc.

Date: 2023-12-18 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: JNZMR0112 Applicant (Grantee) FRN: 0007134034 Logitech Far East, Ltd., (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: Contact Person: Paul Zahra Company Name: Logitech, Inc. Company Address: 3930 North First Street, San Jose, California 95134 Email: [email protected] Sincerely yours, Name: Rick Lien Job Title: Head of Product Compliance Company Name: Logitech Far East, Ltd. Email: [email protected] Tel: +886-3-5778241 #2189

Date: 02/05/2024 FCC ID: JNZMR0112 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing LOGITECH FAR EAST LTD. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing LOGITECH FAR EAST LTD. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------------------- David W Crawford / Senior Manager, Compliance Engineering LOGITECH FAR EAST LTD. Tel: +1-360-817-1253 E-mail: [email protected]

Date: 02/05/2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation FCC ID: JNZMR0112 Applicant (Grantee) FRN: 0007134034 To whom it may concern: FCC US Agent Agent Company Name: Logitech, Inc. Agent FRN: 0005921077 Agent Contact Name: David W Crawford Agent US Address: 4700 NW Camas Meadows Drive, Camas, WA 98607 Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Logitech Far East, Ltd. (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. This letter supersedes the previous version for purposes of updating the U.S. Agent contact information due to changes in responsibilities. Sincerely, ______ David W Crawford Senior Manager, Compliance Engineering Logitech, Inc.

Date: 02/05/2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: JNZMR0112 Applicant (Grantee) FRN: 0007134034 Logitech Far East, Ltd., (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. This letter supersedes the previous version for purposes of updating the U.S. Agent contact information due to changes in responsibilities. U.S. Agent Information: Contact Person: David W Crawford Company Name: Logitech, Inc. Company FRN: 0005921077 Company Address: 4700 NW Camas Meadows Drive, Camas, WA 98607 Email: [email protected] Sincerely yours, ________ Name: Rick Lien Job Title: Head of Product Compliance Company Name: Logitech Far East, Ltd. Email: [email protected] Tel: +886-3-5778241 #2189

LOGITECH FAR EAST LTD. #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: JNZMR0112 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant of Equipment Authorization. External Photos Internal Photos User Manual Test Setup photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Paul Zahra / Senior Manager, Compliance Engineering LOGITECH FAR EAST LTD. Tel: +1-510-713-5436 E-mail: [email protected] 12/18/2023

LOGITECH FAR EAST LTD. #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Date: 2023-12-18 FCC ID: JNZMR0112 AUTHORIZATION LETTER To Whom It May Concern: LOGITECH FAR EAST LTD. hereby authorizes Andrea Hsia / Assistant Manager of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Assistant Manager of BV CPS Taoyuan on LOGITECH FAR EAST LTD.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Paul Zahra / Senior Manager, Compliance Engineering LOGITECH FAR EAST LTD. Tel: +1-510-713-5436 E-mail: [email protected]

LOGITECH FAR EAST LTD. #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Date: 2023-10-16 AUTHORIZATION LETTER To whom it may concern: I, the undersigned Rick Lien of Logitech Far East Ltd. hereby authorize Paul Zahra of Logitech, Inc. to act on my behalf in all matters relating to all processes required in FCC and any communication needed with the national authority. Any and all acts carried out by Paul Zahra on my behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ----------------------------------- Rick Lien / Head of Product Compliance LOGITECH FAR EAST LTD. Tel: +886-03(6122189) Fax: +886-03(5792394) E- mail: [email protected]

Reference No.: BDKG-WTW-P23110534_Ext Page 1/6 CONSTRUCTION PHOTOS OF EUT Silent Reference No.: BDKG-WTW-P23110534_Ext Page 2/6 Reference No.: BDKG-WTW-P23110534_Ext Page 3/6 Reference No.: BDKG-WTW-P23110534_Ext Page 4/6 Non-Silent Reference No.: BDKG-WTW-P23110534_Ext Page 5/6 Reference No.: BDKG-WTW-P23110534_Ext Page 6/6

FCC ID : JNZMR0112 IC : 4418A-MR0112 LABEL & Label LOCATION The label will be permanently affixed at a conspicuous location on the device. BATTERY CAGE

Reference No.: BDKG-WTW-P23110534_Int Page 1/8 CONSTRUCTION PHOTOS OF EUT Brand: Logitech, Model: MR0112 - Silent Reference No.: BDKG-WTW-P23110534_Int Page 2/8 Reference No.: BDKG-WTW-P23110534_Int Page 3/8 Reference No.: BDKG-WTW-P23110534_Int Page 4/8 Antenna Reference No.: BDKG-WTW-P23110534_Int Page 5/8 Non-Silent Reference No.: BDKG-WTW-P23110534_Int Page 6/8 Reference No.: BDKG-WTW-P23110534_Int Page 7/8 Reference No.: BDKG-WTW-P23110534_Int Page 8/8

Logitech AntennaUnderTest(AUT) Report ModelName:MR0112 EquipmentType:WirelessMouse Manufacturer:LogitechTechnology(Suzhou)Co.,Ltd TestLocation:Suzhou,ChinaNo.3SongShanRoad,NewDistrict Testedby:KettyWu ReportDate:2023.11.16 ReportNo:EVT-700-006574 Page1of13 ReportReleaseHistory ReportversionDescriptionDateIssued MR0112AUTReportOriginalrelease2023/11/16 TableofContents 1.EUTAntennaInformation3 2.MeasuredValuesandCalculationofAntennaGains3 3.ConductedPowerMeasurement4 3.1TestSetup4 3.2TestInstruments4 3.3TestProcedure4 3.4TestResultofRFconductedPower4 4.2DRadiationPatternMeasurement6 4.1TestLocation6 4.2Descriptionoftheanechoicchamber6 4.3TestInstruments6 4.4TestProcedure7 4.5TestSetupphotos8 4.62DPatternTestPlot10 ReportNo:EVT-700-006574 Page2of13 1.EUTAntennaInformation 1)AntennaMaterial：PCBonboard 2)AntennaType：Printed monopoleantenna 3)AntennaDimension:24x9mm 4)OperatingFrequency：2.4GHz-2.4835GHz 5)InputImpedance：50Ω 6)Standing-WaveRatio：2:1 2. MeasuredValuesandCalculationofAntennaGains Measure peakhorizontal/verticalEIRP oneachx-y,y-z,x-zplane.Thehighest measuredvalueswillbeusedtocalculatetheantennapeakgain. AntennaPeakGain(dBi)=MaxEIRP(dBm)-ConductedPower(dBm) Frequency X-YPlane 휙=0~360⁰,휃=90⁰ X-ZPlane 휙=0⁰,휃=0~360⁰ Y-ZPlane 휙=90⁰,휃=0~360⁰ MaxPeak EIRP (dBm) Conducted Power (dBm) Antenna Peak Gain (dBi) Ver. Peak EIRP (dBm) Hori. Peak EIRP (dBm) Ver. Peak EIRP (dBm) Hori. Peak EIRP (dBm) Ver. Peak EIRP (dBm) Hori. Peak EIRP (dBm) 2405-8.626.333.830.205.563.096.333.233.10 2444-8.446.193.971.265.913.716.193.392.80 2474-8.186.034.811.656.244.846.243.422.82 TestDate:2023.11.16 ReportNo:EVT-700-006574 Page3of13 3.ConductedPowerMeasurement 3.1TestSetup 3.2TestInstruments DescriptionModelNo.SerialNo.LastCalibration SpectrumAnalyzer Keysight N9020BMY601105082023.7.14 RFsignalcable Woken Huber+suhner 10844497 2762023.01.28 Note:Thecalibrationintervaloftheabovetestinstrumentsis12months 3.3TestProcedure AspectrumanalyzerorPowermeterwasusedtoperformoutputpower measurement,settingthedetectortoaverageandconfiguringEUTcontinuously transmittingpower(100%dutycycle). 3.4TestResultofRFconductedPower FrequencyConductedPower(dBm) 24053.23 24443.39 ReportNo:EVT-700-006574 Page4of13 FrequencyConductedPower(dBm) 24743.42 TestDate:2023.11.16 ReportNo:EVT-700-006574 Page5of13 4.2DRadiationPatternMeasurement 4.1TestLocation 2DradiationpatternmeasurementinLogitechChinaSZ2.4GHzFACanechoic chamber. 4.2Descriptionoftheanechoicchamber Chamberspecification Length:5.0m Width:2.8m Height:2.8m Turntableheight:1.4m Measurementantennaheight:1.4m Blockdiagramtoshowthechamberandtestequipment. 4.3TestInstruments DescriptionModelNo.SerialNo.LastCalibration SpectrumAnalyzerN9010AMY490611632023.7.14 ReportNo:EVT-700-006574 Page6of13 Keysight HornAntenna ETS BBHA9120 D(1201) D692502023.01.28 RFsignalcableSUCOFLEX104SN293270/42023.01.28 SoftwareFAC-Radio Measurement System Version1.1.0.7N/A TurntablecontrollerBJ3AC-100N/A2023.01.28 LNALN1G113212822023.01.28 Note:Thecalibrationintervaloftheabovetestinstrumentsis12months 4.4TestProcedure i.ConnecttheEUTtoSpectrumAnalyzerandrecordthepowersettingof EUTandthemeasuredconductedpower. ii.FastentheEUTinthecenteroftheturntable,recordthecoordinatesand takepictures. iii.ConfiguringEUTcontinuouslytransmittingpower(100%dutycycle). iv.MakesurethetransmitsignalisstableandatthemaximumRFpower level. v.Setupthechannelpowerfunctionbyspectrumanalyzer. vi.Readthechannelpowerlevelonthespectrumanalyzerandrecordinthe followingpositions. 1.Theturntableisthensteppedbetween0to360degreesalongthe horizontalplanein15-degreeincrements. 2.Dataisrecordedusingthespectrumanalyzerforboththetaandphi polarizationsateachposition. vii.RotatetheEUTwith90degreesandrepeatstepf.1andstepf.2untilall3 planes(X-Y,X-Z,Y-Z)weremeasured. viii.Accordingtosubstitutiontechniques,asubstitutionhornantennais substitutedforEUTatthesamepositionandthesignalgeneratorexports theCWsignaltothesubstitutionantennaviaaTXcable.Rotatedthe turntableandmovedthereceivingantennatofindthemaximumradiation power.AdjustoutputpowerlevelofS.Gtogetavalueofspectrumreading equalto“RawValue''gottenfromstepvii.RecordthepowerlevelofS.G. ReportNo:EVT-700-006574 Page7of13 EIRP= P SigGen + G T – L C where: P SigGen = powersettingof the signalgeneratorthat producesthe same receivedpowerreadingas the DUT, in dBm; G T = gain of the substituteantenna,in dBd (ERP)or dBi (EIRP); L C = signalloss in the cableconnectingthe signalgeneratorto the substituteantenna,in dB ix.AntennaPeakGain(dBi)= Max EIRP(dBm)- ConductedPower(dBm) 4.5 Test Setup photos ReportNo: EVT-700-006574 Page8 of 13 please see another confidential document 4.6 2D Pattern Test Plot X-Y Plane:Horizontal ReportNo: EVT-700-006574 Page10 of 13 X-YPlane:Vertical X-ZPlane:Horizontal ReportNo:EVT-700-006574 Page11of13 X-ZPlane:Vertical ReportNo:EVT-700-006574 Page12of13 Y-ZPlane:Horizontal Y-ZPlane:Vertical ReportNo:EVT-700-006574 Page13of13

Report No.: RFBDKG-WTW-P23110534 Page No. 1 / 37 Report Format Version: 7.1.0 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart C (Section 15.247) Report No.: RFBDKG-WTW-P23110534 FCC ID: JNZMR0112 Product: Wireless Mouse Brand: Logitech, logi, logitech Model No.: MR0112 Received Date: 2023/11/21 Test Date: 2023/11/24 ~ 2023/12/5 Issued Date: 2023/12/27 Applicant: LOGITECH FAR EAST LTD. Address: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 Approved by: , Date: 2023/12/27 Wen Yu / Assistant Manager This test report consists of 37 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Claire Kuan / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBDKG-WTW-P23110534 Page No. 2 / 37 Report Format Version: 7.1.0 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results .......................................................................................................................................... 6 2.1 Measurement Uncertainty ........................................................................................................................................ 6 2.2 Supplementary Information ...................................................................................................................................... 6 3 General Information ................................................................................................................................................... 7 3.1 General Description .................................................................................................................................................. 7 3.2 Antenna Description of EUT ..................................................................................................................................... 8 3.3 Channel List .............................................................................................................................................................. 9 3.4 Test Mode Applicability and Tested Channel Detail ................................................................................................ 10 3.5 Duty Cycle of Test Signal........................................................................................................................................ 11 3.6 Test Program Used and Operation Descriptions .................................................................................................... 12 3.7 Connection Diagram of EUT and Peripheral Devices ............................................................................................ 12 3.8 Configuration of Peripheral Devices and Cable Connections ................................................................................ 12 4 Test Instruments ...................................................................................................................................................... 13 4.1 RF Output Power .................................................................................................................................................... 13 4.2 Power Spectral Density .......................................................................................................................................... 13 4.3 6 dB Bandwidth ...............................................................................................................................................…

Text truncated - open the document above for the full version.

Antenna setup photo MR0112 X-Y Plane: X-Z Plane: Y-Z Plane:

Reference No.: BDKG-WTW-P23110534-TSup Page 1/4 PHOTOGRAPHS OF THE TEST CONFIGURATION Unwanted Emissions below 1 GHz Reference No.: BDKG-WTW-P23110534-TSup Page 2/4 Reference No.: BDKG-WTW-P23110534-TSup Page 3/4 Unwanted Emissions above 1 GHz Reference No.: BDKG-WTW-P23110534-TSup Page 4/4