JNZPR0004Powered Wireless Charging Pad

POW ERED PAD Model: PR0004 620-009240.002 © 2019 Logitech, Logi and the Logitech Logo are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other countries. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. © 2019 Logitech, Logi et le logo Logitech sont des marques commerciales ou déposées de Logitech Europe S.A. et/ou de ses sociétés affiliées aux États-Unis et dans d'autres pays. Logitech décline toute responsabilité en cas d'erreurs susceptibles de s'être glissées dans le présent manuel. Les informations énoncées dans ce document peuvent faire l'objet de modifications sans préavis. https://www.logitech.com/ powered-pad 3MM Important Safety, Compliance and Warranty Information Informations importantes concernant la sécurité, la mise en conformité et la garantie English (US) Read Manual Before Product Use. For Product Safety, EMC, RF and Energy information, go to www.logitech.com/compliance. Maintenance is not required for product compliance. WARNING! The power supply is for indoor use only. Only use the power supply included with your product. Do not attempt to repair or use a damaged power supply. Do not immerse the power supply in water or subject it to physical abuse. Inspect the power supply regularly for cable, plug, and casing damage. Safe Usage Guidelines for Products • Do not open or modify the product except for battery removal and replacement. • Do not disassemble or attempt to service this product. • This product is safe under normal and reasonably foreseeable operating conditions. • If product is operating improperly, please contact Logitech support. • Product must be returned to the manufacturer for any service or repair. • This is not a Children's Product and is not intended for use by children under 14 years old. • Wireless Charging. Magnetic Field present and may interfere with medical devices. • Avoid shorting the product charge contacts. Logitech Compliance: For Product Safety, EMC, RF and Energy information, go to www.logitech.com/compliance. Maintenance is not required for product compliance. This product complies with relevant legal requirements for Restriction of Hazardous Substances (RoHS) and management of waste electronic and electrical equipment (WEEE) in the EU, Turkey, Ukraine, United Arab Emirates, India, China and Taiwan. For RoHS and WEEE information, go to www.logitech.com/compliance. Batteries, electronic and electrical equipment should not be disposed of with household waste. Wherever possible, they should be segregated and brought to an appropriate collection point to enable recycling and avoid potential impacts on the environment and human health. For more information, contact your local authorities or place of purchase, or visit www.logitech.com/recycling. FCC statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates , uses and can radiate radio frequency energy. And, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning: Where shielded interface cables or accessories have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC rules. Changes or modifications to product not expressly approved by Logitech, Inc could void your right to use or operate your product by the FCC. IC statement : CAN ICES-3 (B) / NMB-3 (B) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure Statement This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Logitech Limited Hardware Warranty – A Summary Logitech warrants that its hardware product shall be free from defects in materials and workmanship for the length of time identified on your product package beginning from the date of the original retail purchase. See support.logitech.com for specific warranty information about your product and procedures to act on a warranty claim. Logitech’s entire liability and your exclusive remedy for any breach of warranty shall be, at Logitech’s option, to repair or replace a functional equivalent of the product, or to refund the price paid, if the hardware is returned to the point of purchase or such other place as Logitech…

Text truncated - open the document above for the full version.

Logitech Far East Ltd. No. 2 Creation Road 4, Science-Based Industrial Park, Hsinchu, 300 Taiwan Confidential Letter Date: 2019/11/26 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID：JNZPR0004 To Whom It May Concern: Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below: ● Block Diagrams ● Schematics ● Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Short Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby respectfully request short-term confidential treatment of information accompanying this application as outlined below until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: ● External Photos ● Internal Photos ● Test Setup photos ● Users Manuals Sincerely, Applicant’s company name : Logitech Far East Ltd. Applicant’s company address : No. 2 Creation Road 4, Science-Based Industrial Park, Hsinchu, 300 Taiwan Signature : Name and Job Title : Bonnie Chou / Sr. Certification Engineer E-Mail : [email protected] Tel : +886-3-577-8241 Ext. 2053 Fax : +886-3-579-2394

Reference No.: 191002E01-1 Page 1 Reference No.: xxxxxxxx CONSTRUCTION PHOTOS OF EUT Reference No.: 191002E01-1 Page 2 Reference No.: xxxxxxxx Reference No.: 191002E01-1 Page 3 Reference No.: xxxxxxxx Reference No.: 191002E01-1 Page 4 Reference No.: xxxxxxxx Reference No.: 191002E01-1 Page 5 Reference No.: xxxxxxxx Adapter - Brand: logi, Model name: AD2103320 Reference No.: 191002E01-1 Page 6 Reference No.: xxxxxxxx

2019/11/05 Compliance logo last modification: mmscale 1:1 CONFIDENTIAL Durian -Marking artwork Marking is Laser Etching 004 Durian | US+Canada+Mexico+Paraguay and Argentina Inf ormation Marking is Laser etching

Reference No.: 191002E01-2 Page 1 Reference No.: xxxxxxxx CONSTRUCTION PHOTOS OF EUT Reference No.: 191002E01-2 Page 2 Reference No.: xxxxxxxx Reference No.: 191002E01-2 Page 3 Reference No.: xxxxxxxx Reference No.: 191002E01-2 Page 4 Reference No.: xxxxxxxx Reference No.: 191002E01-2 Page 5 Reference No.: xxxxxxxx Reference No.: 191002E01-2 Page 6 Reference No.: xxxxxxxx Reference No.: 191002E01-2 Page 7 Reference No.: xxxxxxxx Coil Antenna

Report No.: SA191002E01 Page No. 1 / 13 Report Format Version: 6.1.1 RF Exposure Test Report Report No.: SA191002E01 FCC ID: JNZPR0004 Test Model: PR0004 Received Date: Oct. 02, 2019 Test Date: Oct. 05 to Nov. 15, 2019 Issued Date: Dec. 02, 2019 Applicant: LOGITECH FAR EAST LTD. Address: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA191002E01 Page No. 2 / 13 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 General Information .............................................................................................................................. 5 2.1 General Description of EUT ................................................................................................................ 5 3 RF Exposure .......................................................................................................................................... 6 3.1 Description of Support Units ............................................................................................................... 6 3.1.1 Configuration of System under Test .................................................................................................... 6 3.2 Test Setup ........................................................................................................................................... 7 3.3 Test Instruments .................................................................................................................................. 7 3.4 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 8 3.5 Test Point Description ......................................................................................................................... 8 4 Calculation Result of Maximum Conducted Power ........................................................................... 9 5 Photographs of the Test Configuration ............................................................................................ 13 Report No.: SA191002E01 Page No. 3 / 13 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA191002E01 Original release. Dec. 02, 2019 Report No.: SA191002E01 Page No. 4 / 13 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Powered Wireless Charging Pad Brand: Logitech Test Model: PR0004 Sample Status: ENGINEERING SAMPLE Applicant: LOGITECH FAR EAST LTD. Test Date: Oct. 05 to Nov. 15, 2019 Standards: FCC Part 2 (Section 2.1091) FCC Part 1 (Section 1.1307(c) and (d), Section 1.1310) KDB 680106 D01 RF Exposure Wireless Charging v03 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Dec. 02, 2019 Vivian Huang / Specialist Approved by : , Date: Dec. 02, 2019 Clark Lin / Technical Manager Report No.: SA191002E01 Page No. 5 / 13 Report Format Version: 6.1.1 2 General Information 2.1 General Description of EUT Product Powered Wireless Charging Pad Test Model PR0004 Sample Status ENGINEERING SAMPLE Rating DC 19V from power adapter Operating Frequency 127.795 kHz Antenna Type Coil Antenna Field Strength 80.14dBuV/m Dimensions 85*85*13 mm Accessory Device Adapter x1 Data Cable Supplied NA Maximum Power Output from the Charging Coil 10W Note: 1. The EUT may have a lot of colors for marketing requirement. 2. The EUT could be supplied with a power adapter as the following table: Adapter No, Brand Model No. Spec. Color 1 logi AD2103320 Input: 100-240V, 0.7A, 50/60Hz Output: 19V, 1.32A DC Cable: 1.5m White 2 logi AD2103320 Input: 100-240V, 0.7A, 50/60Hz Output: 19V, 1.32A DC Cable: 1.5m …

Text truncated - open the document above for the full version.

Report No.: RF191002E01 R1 Page No. 1 / 39 Report Format Version: 6.1.1 Cancels and replaces the report No.: RF191002E01 dated Dec. 02, 2019 FCC Test Report Report No.: RF191002E01 R1 FCC ID: JNZPR0004 Test Model: PR0004 Received Date: Oct. 02, 2019 Test Date: Oct. 05 to Nov. 15, 2019 Issued Date: Dec. 13, 2019 Applicant: LOGITECH FAR EAST LTD. Address: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan. FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF191002E01 R1 Page No. 2 / 39 Report Format Version: 6.1.1 Cancels and replaces the report No.: RF191002E01 dated Dec. 02, 2019 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 6 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 7 3.3 Description of Support Units ............................................................................................................... 8 3.3.1 Configuration of System under Test .................................................................................................... 8 3.4 General Description of Applied Standards .......................................................................................... 9 4 Test Types and Results ...................................................................................................................... 10 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 10 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 10 4.1.2 Test Instruments ................................................................................................................................. 11 4.1.3 Test Procedures ................................................................................................................................. 13 4.1.4 Deviation from Test Standard ............................................................................................................ 13 4.1.5 Test Set Up ........................................................................................................................................ 14 4.1.6 EUT Operating Conditions ................................................................................................................. 14 4.1.7 Test Results ....................................................................................................................................... 15 4.2 Conducted Emission Measurement .................................................................................................. 31 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 31 4.2.2 Test Instruments ................................................................................................................................ 31 4.2.3 Test Procedures ................................................................................................................................. 33 4.2.4 Deviation fro…

Text truncated - open the document above for the full version.

Reference No.: 191002E01-1 Page No. 1 / 12 PHOTOGRAPHS OF THE TEST CONFIGURATION E-Field (Charging Mode - Left) E-Field (Charging Mode - Right) Reference No.: 191002E01-1 Page No. 2 / 12 E-Field (Charging Mode – Z-axis) E-Field (Charging Mode - Top) Reference No.: 191002E01-1 Page No. 3 / 12 E-Field (Charging Mode - Bottom) Reference No.: 191002E01-1 Page No. 4 / 12 E-Field (Standby Mode - Left) E-Field (Standby Mode - Right) Reference No.: 191002E01-1 Page No. 5 / 12 E-Field (Standby Mode – Z-axis) E-Field (Standby Mode - Top) Reference No.: 191002E01-1 Page No. 6 / 12 E-Field (Standby Mode - Bottom) Reference No.: 191002E01-1 Page No. 7 / 12 H-Field (Charging Mode - Left) H-Field (Charging Mode - Right) Reference No.: 191002E01-1 Page No. 8 / 12 H-Field (Charging Mode – Z-axis) H-Field (Charging Mode - Top) Reference No.: 191002E01-1 Page No. 9 / 12 H-Field (Charging Mode - Bottom) Reference No.: 191002E01-1 Page No. 10 / 12 H-Field (Standby Mode - Left) H-Field (Standby Mode - Right) Reference No.: 191002E01-1 Page No. 11 / 12 H-Field (Standby Mode – Z-axis) H-Field (Standby Mode - Top) Reference No.: 191002E01-1 Page No. 12 / 12 H-Field (Standby Mode - Bottom)

Reference No.: 191002E01 Page No. 1 / 2 Reference No.: PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Reference No.: 191002E01 Page No. 2 / 2 Reference No.: RADIATED EMISSION TEST