JNZS00122BTLEWireless Speaker

Logitech® Important Information Safety, Regulatory, and Warranty English Additional compliance information: http://www.logitech.com/compliance. UL Statement: Your product is UL approved. Use only with UL listed ITE computers. FCC United States and IC-Canada This hardware device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Compliance Information Statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. Modifications to this product not authorized by Logitech could void your right to use or operate this product by the FCC. Where shielded interface cables or accessories have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations. IC-Canada Statements: Corded products: This Class B digital apparatus complies with Canadian ICES-003. Logitech hardware product limited warranty. Logitech warrants to the original purchaser that your Logitech hardware product shall be free from defects in material and workmanship for the period of time, identified on your product package and/or contained in the user documentation, from the date of purchase. You may also find this information by selecting your product in the Online Support section of our website at www.logitech.com/support. Except where prohibited by applicable law, This warranty is nontransferable and is limited to the original purchaser. This warranty gives you specific legal rights, and you may also have other rights that vary under local laws. Logitech's entire liability and your exclusive remedy for any breach of warranty shall be, at Logitech's option, (1) to repair or replace the hardware, or (2) to refund the price paid, provided that the hardware is returned to the point of purchase or such other place as Logitech may direct with a copy of the sales receipt or dated itemized receipt. Shipping and handling charges may apply, except where prohibited by applicable law. Logitech may, at its option, use new or refurbished or used parts in good working condition to repair or replace any hardware product. Any replacement hardware product will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer or for any additional period of time that may be applicable in your jurisdiction. This warranty does not cover problems or damage resulting from (1) accident, abuse, misapplication, or any unauthorized repair, modification or disassembly; (2) improper operation or maintenance, usage not in accordance with product instructions or connection to improper voltage supply; or (3) use of consumables, such as replacement batteries, not supplied by Logitech except where such restriction is prohibited by applicable law. How to obtain warranty support. Before submitting a warranty claim, we recommend you visit the support section at www.logitech.com/support for technical assistance. Valid warranty claims are generally processed through the point of purchase during the first thirty (30) days after purchase; however, this period of time may vary depending on where you purchased your product - please check with Logitech or the retailer where you purchased your product for details. Warranty claims that cannot be processed through the point of purchase and any other product related questions should be addressed directly to Logitech. The addresses and customer service contact information for Logitech can be found in the documentation accompanying your product and on the web at www.logitech.com/support. Limitation of liability. LOGITECH SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS, REVENUE OR DATA (WHETHER DIRECT OR INDIRECT) OR COMMERCIAL LOSS FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON YOUR PRODUCT EVEN IF LOGITECH HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Duration of implied warranties. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THIS HARDWARE PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THE APPLICABLE LIMITED WARRANTY PERIOD FOR YOUR PRODUCT. Additional Rights. Some states do not allow limitations on how long an implied warranty lasts, or allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from State to State or by country or other jurisdiction. National Statutory Rights. Consumers have legal rights under a…

Text truncated - open the document above for the full version.

PRESS POWER BUTTON White powered on Red low charge English POWER 1 BLUETOOTH Solid white connected Blinking white connecting First time UE BOOM automatically goes in connection mode. Just select UE BOOM from your device Bluetooth settings. To add other devices hold Bluetooth button for 2 sec. If your device is NFC enabled, hold it near UE BOOM. NFC BLUETOOTH STATUS INDICATOR CONNECT 2 TURN IT UP. GET DOWN. PLAY 3 To learn more check out the UE BOOM online immersion guide www.UltimateEars.com/UEBOOMimmersionguide And download the UE BOOM app to enable additional features and personalization. DRÜCKEN SIE DEN EIN-/ AUSSCHALTER Weiß eingeschaltet Rot Akkustand niedrig Deutsch EIN/AUS 1 BLUETOOTH BLUETOOTH-STATUSANZEIGE Weißes Leuchten verbunden Weißes Blinken Verbindung wird hergestellt Beim ersten Mal wird UE BOOM automatisch in den Verbindungsmodus versetzt. Wählen Sie einfach UE BOOM in den Bluetooth-Einstellungen Ihres Geräts. Um andere Geräte hinzuzufügen, halten Sie die Bluetooth-Taste zwei Sekunden lang gedrückt. Wenn Ihr Gerät NFC- fähig ist, halten Sie es in die Nähe der UE BOOM. NFC BLUETOOTH-STATUSANZEIGE ANSCHLIESSEN 2 AUFDREHEN. LOSLEGEN. WIEDERGABE 3 Weitere Infos finden Sie im UE BOOM Immersion Guide www.UltimateEars.com/UEBOOMimmersionguide Und laden Sie die UE BOOM-App herunter, um zusätzliche Funktionen nutzen sowie individuelle Einstellungen vornehmen zu können. APPUYEZ SUR LE BOUTON D’ALIMENTATION Blanc sous tension Rouge batterie faible Français ALIMENTATION 1 BLUETOOTH Blanc continu connecté Blanc clignotant connexion NFC TÉMOIN D’ÉTAT BLUETOOTH CONNEXION 2 À la première utilisation, UE BOOM passe automatiquement en mode de connexion. Il vous suffit de sélectionner UE BOOM à partir des paramètres Bluetooth de votre dispositif. Pour ajouter des dispositifs, maintenez le bouton Bluetooth enfoncé pendant 2 secondes. Si votre dispositif est compatible NFC, positionnez-le près du haut-parleur UE BOOM. AUGMENTEZ LE VOLUME. PROFITEZ DU SON. LECTURE 3 Pour en savoir plus, consultez le guide d’immersion UE BOOM en ligne www.UltimateEars.com/UEBOOMimmersionguide Et téléchargez l’application UE BOOM pour profiter de fonctionnalités supplémentaires et personnaliser le produit. PREMI IL PULSANTE DI ACCENSIONE Bianco acceso Rosso livello di carica basso Italiano ACCENDI 1 BLUETOOTH Luce bianca fissa connesso Luce bianca lampeggiante in connessione Al primo collegamento, UE BOOM viene impostato automaticamente in modalità di connessione. Seleziona UE BOOM dalle impostazioni Bluetooth del dispositivo. Per aggiungere altri dispositivi, tieni premuto il pulsante Bluetooth per 2 secondi. Se il dispositivo in uso supporta la funzionalità NFC, posizionalo in prossimità di UE BOOM. NFC INDICATORE DI STATO BLUETOOTH CONNETTI 2 ALZA IL VOLUME. DIVERTITI. RIPRODUCI 3 Per ulteriori informazioni, consulta la guida approfondita di UE BOOM online www.UltimateEars.com/UEBOOMimmersionguide E per ulteriori funzionalità e una maggiore personalizzazione, scarica l’app di UE BOOM. PULSE EL BOTÓN DE ENCENDIDO Blanco encendido Rojo carga baja Español ALIMENTACIÓN 1 BLUETOOTH INDICADOR DE ESTADO BLUETOOTH Blanco permanente conectado Destellos blancos conectando La primera vez, UE BOOM pasa automáticamente al modo de conexión. Seleccione UE BOOM en la configuración Bluetooth del dispositivo. Para agregar otros dispositivos, mantenga presionado el botón Bluetooth durante dos segundos. Si su dispositivo está preparado para NFC, sosténgalo cerca de UE BOOM. NFC INDICADOR DE ESTADO BLUETOOTH CONEXIÓN 2 SUBA EL VOLUMEN. ABAJO. REPRODUCCIÓN 3 Para obtener más información, consulte la guía de inmersión en línea de UE BOOM www.UltimateEars.com/UEBOOMimmersionguide Y descargue la aplicación UE BOOM para activar funciones adicionales y personalización. PRIMA O BOTÃO LIGAR/ DESLIGAR Branco ligado Vermelho bateria fraca Português LIGAR/DESLIGAR 1 BLUETOOTH INDICADOR DE ESTADO BLUETOOTH Branco sólido ligado Branco intermitente a ligar Na primeira vez, o UE BOOM entra automaticamente em modo de ligação. Basta seleccionar UE BOOM nas definições de Bluetooth do seu dispositivo. Para adicionar outros dispositivos, mantenha premido o botão Bluetooth durante 2 segundos. Se o seu dispositivo possui a tecnologia NFC activada, aproxime-o do UE BOOM. NFC INDICADOR DE ESTADO BLUETOOTH LIGAR 2 AUMENTE O VOLUME. REDUZA O STRESS. REPR. 3 Para saber mais, consulte o manual de imersão UE BOOM online www.UltimateEars.com/UEBOOMimmersionguide E transfira a aplicação UE BOOM para activar funcionalidades adicionais e personalização. DRUK OP DE AAN-UITKNOP Wit ingeschakeld Rood laag vermogen Nederlands AAN/UIT 1 BLUETOOTH BLUETOOTH-STATUSLAMPJE Brandt wit verbonden Knippert wit bezig met verbinden De eerste keer gaat UE BOOM automatisch over naar de verbindingsmodus. Selecteer gewoon UE BOOM in de Bluetooth-instellingen van je apparaat. Houd de Bluetooth-knop 2 seconden ingedrukt om andere apparaten toe te voegen. Als je apparaat NFC heeft, houd je het in de buurt van de UE BOOM. NFC BLUETOOTH-STATUSLAMPJE VERBINDEN 2 TURN IT UP. GET DOWN. AFSPELEN 3 Zie voor meer informatie de UE BOOM- online-immersiegids www.UltimateEars.com/UEBOOMimmersionguide Download de UE BOOM-app voor extra functies en om alles een persoonlijk tintje te geven. PAINA VIRTAPAINIKETTA Valkoinen virta kytketty Punainen lataus vähissä Suomi KYTKE VIRTA 1 BLUETOOTH BLUETOOTH-TILAN MERKKIVALO Tasaisesti palava valkoinen yhdistetty Vilkkuva valkoinen yhdistetään Ensimmäisellä kerralla UE BOOM siirtyy automaattisesti yhdistämistilaan. Valitse UE BOOM laitteesi Bluetooth-asetuksista. Jos haluat lisätä muita laitteita, pidä Bluetooth- painike painettuna kahden sekunnin ajan. Jos laitteessasi voi käyttää NFC-tekniikkaa, pidä laitettasi UE BOOM -laitteen lähellä. NFC BLUETOOTH-TILAN MERKKIVALO YHDISTÄ 2 TURN IT UP. GET DOWN. TOISTA 3 Lue lisää UE BOOM -elämysoppaasta www.UltimateEars.com/UEBOOMimmersionguide Lataa myös UE BOOM -sovellus, jolla saat käyttöösi lisäominaisuudet ja m…

Text truncated - open the document above for the full version.

Report No.: 130218E12B 1 of 27 Reference No.:141209E14 CONSTRUCTION PHOTOS OF EUT Report No.: 130218E12B 26 of 27 Reference No.:141209E14 Report No.: 130218E12B 27 of 27 Reference No.:141209E14

(Fig.1) FCC ID: JNZS00122BTLE FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device.

Report No.: 130218E12B 2 of 27 Reference No.:141209E14 Report No.: 130218E12B 3 of 27 Reference No.:141209E14 Report No.: 130218E12B 4 of 27 Reference No.:141209E14 Report No.: 130218E12B 5 of 27 Reference No.:141209E14 Report No.: 130218E12B 6 of 27 Reference No.:141209E14 Report No.: 130218E12B 7 of 27 Reference No.:141209E14 Report No.: 130218E12B 8 of 27 Reference No.:141209E14 Report No.: 130218E12B 9 of 27 Reference No.:141209E14 Report No.: 130218E12B 10 of 27 Reference No.:141209E14 Report No.: 130218E12B 11 of 27 Reference No.:141209E14 Report No.: 130218E12B 12 of 27 Reference No.:141209E14 Report No.: 130218E12B 13 of 27 Reference No.:141209E14 Report No.: 130218E12B 14 of 27 Reference No.:141209E14 Report No.: 130218E12B 15 of 27 Reference No.:141209E14 Report No.: 130218E12B 16 of 27 Reference No.:141209E14 Report No.: 130218E12B 17 of 27 Reference No.:141209E14 Report No.: 130218E12B 18 of 27 Reference No.:141209E14 Report No.: 130218E12B 19 of 27 Reference No.:141209E14 Report No.: 130218E12B 20 of 27 Reference No.:141209E14 Report No.: 130218E12B 21 of 27 Reference No.:141209E14 Report No.: 130218E12B 22 of 27 Reference No.:141209E14 Report No.: 130218E12B 23 of 27 Reference No.:141209E14 Report No.: 130218E12B 24 of 27 Reference No.:141209E14 Report No.: 130218E12B 25 of 27 Reference No.:141209E14

Report No.: SA130218E12B 1 of 6 Report Format Version 5.0.1 Reference No. : 141209E14 RF EXPOSURE REPORT REPORT NO.: SA130218E12B MODEL NO.: S-00122 FCC ID: JNZS00122BTLE RECEIVED: Feb. 18, 2013 TESTED: Feb. 20 2013 ; Dec. 15, 2014 ISSUED: Dec. 22, 2014 APPLICANT: LOGITECH FAR EAST LTD. ADDRESS: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA130218E12B 2 of 6 Report Format Version 5.0.1 Reference No. : 141209E14 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. EVALUATION RESULT ........................................................................................... 5 2.1 SAR TEST EXCLUSION THRESHOLDS ................................................................ 5 Report No.: SA130218E12B 3 of 6 Report Format Version 5.0.1 Reference No. : 141209E14 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130218E12B Original release Dec. 22, 2014 Report No.: SA130218E12B 4 of 6 Report Format Version 5.0.1 Reference No. : 141209E14 1. CERTIFICATION PRODUCT: Wireless Speaker BRAND NAME: Ue, Logitech｜Ue, Logitech MODEL NO.: S-00122 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: LOGITECH FAR EAST LTD. TESTED: Feb. 20 2013 ; Dec. 15, 2014 STANDARDS: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment (Model: S-00122) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Dec. 22, 2014 ( Midoli Peng, Specialist ) Approved by: , Date:Dec. 22, 2014 ( May Chen, Manager ) Report No.: SA130218E12B 5 of 6 Report Format Version 5.0.1 Reference No. : 141209E14 2. EVALUATION RESULT 2.1 SAR TEST EXCLUSION THRESHOLDS Following FCC KDB 447498 D03 “General SAR test exclusion guidance” Following FCC KDB 447498 D01 “General RF Exposure Guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR where  f(GHz) is the RF channel transmit frequen cy in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA130218E12B 6 of 6 Report Format Version 5.0.1 Reference No. : 141209E14 Max…

Text truncated - open the document above for the full version.

Report No.: RF130218E12B 1 of 81 Report Format Version 5.2.1 Reference No.: 141209E14 FCC TEST REPORT REPORT NO.: RF130218E12B MODEL NO.: S-00122 FCC ID: JNZS00122BTLE RECEIVED: Feb. 18, 2013 TESTED: Feb. 20 to 23, 2013 ; Dec. 15 to 20, 2014 ISSUED: Dec. 22, 2014 APPLICANT: LOGITECH FAR EAST LTD. ADDRESS: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, Taiwan, R.O.C. TEST LOCATION (2): No.49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF130218E12B 2 of 81 Report Format Version 5.2.1 Reference No.: 141209E14 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................................. 5 1 CERTIFICATION ...................................................................................................................... 6 2 SUMMARY OF TEST RESULTS ............................................................................................. 7 2.1 MEASUREMENT UNCERTAINTY ........................................................................................... 9 3 GENERAL INFORMATION .................................................................................................... 10 3.1 GENERAL DESCRIPTION OF EUT ...................................................................................... 10 3.2 DESCRIPTION OF TEST MODES ........................................................................................ 12 3.3 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL: ........................................ 13 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................................... 17 3.5 DUTY CYCLE OF TEST SIGNAL .......................................................................................... 18 3.6 DESCRIPTION OF SUPPORT UNITS .................................................................................. 19 3.7 CONFIGURATION OF SYSTEM UNDER TEST ................................................................... 19 4 TEST PROCEDURES AND RESULTS (BT-EDR) ................................................................. 20 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................................ 20 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................................... 20 4.1.2 TEST INSTRUMENTS ........................................................................................................... 20 4.1.3 TEST PROCEDURES ............................................................................................................ 21 4.1.4 DEVIATION FROM TEST STANDARD .................................................................................. 21 4.1.5 TEST SETUP ......................................................................................................................... 21 4.1.6 EUT OPERATING CONDITIONS........................................................................................... 22 4.1.7 TEST RESULTS ..................................................................................................................... 23 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................................ 25 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............................. 25 4.2.2 TEST INSTRUMENTS ........................................................................................................... 26 4.2.3 TEST PROCEDURES ............................................................................................................ 28 4.2.4 DEVIATION FROM TEST STANDARD .................................................................................. 28 4.2.5 TEST SETUP ......................................................................................................................... 29 4.2.6 EUT OPERATING CONDITIONS........................................................................................... 29 4.2.7 TEST RESULTS ............................................................................................................ ......... 30 4.3 NUMBER OF HOPPING FREQUENCY USED ................................................................…

Text truncated - open the document above for the full version.

Report No.: 120810E25C 1 of 3 Reference No.: 121009E05 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 120810E25C 2 of 3 Reference No.: 121009E05 RADIATED EMISSION TEST(Below 1GHz) Report No.: 120810E25C 3 of 3 Reference No.: 121009E05 RADIATED EMISSION TEST(Above 1GHz)