JNZS00144Bluetooth Transceiver

English Important ergonomic information. Long periods of repetitive motion using an improperly set-up workspace, incorrect body position, and poor work habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. If you feel pain, numbness, weakness, swelling, burning, cramping, or stiffness in your hands, wrists, arms, shoulders, neck, or back, see a qualified health professional. For more information, please read the Comfort Guidelines located on the Logitech® web site at http://www.logitech.com/comfort, or on the Logitech® Software CD. Do not immerse product in any liquid or expose it to heat or moisture. There are no serviceable parts. WARNING! Logitech gaming products should be used under the supervision of an adult. WARNING! CHOKING HAZARD: Logitech steering wheels have small parts and are not for children under 3 years. Class 1 laser products. International standards and safety. Logitech Class 1 laser products comply with International Standard IEC/EN 60825-1:2007, Class 1 Laser Product, and also comply with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007: 1) Emission of one parallel beam or two parallel beams (for devices that can track on glass) of infrared user- invisible light; 2) Maximum power of 716 microwatts CW, wavelength range 832– 865 nanometers; 3) Operating temperature between 5°C (41°F) and 40°C (104° F). CAUTION! There is a risk of radiation exposure if product is misused or disassembled. Class 1M laser products. International standards and safety. Logitech Class 1M laser products comply with International Standard IEC/EN 60825-1: 2007, Class 1M Laser Product Logitech Class 1M laser products and also comply with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007, as follows: 1) Emission of diverging beam of minimum +/-2° of infrared user-invisible light; 2) Maximum power of 1.4 milliwatts CW, wavelength range 832–865 nanometers; 3) Operating temperature between 5°C (41°F) and 40°C (104° F). CAUTION! Invisible Laser Radiation. There is a risk of radiation exposure if product is misused or disassembled. Viewing the laser output with certain optical instruments (for example, eye loupes, magnifiers, and microscopes) within a distance of 100mm may pose an eye hazard. INVISIBLE LASER RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LASER PRODUCT Additional compliance information. To obtain additional information about Class 1 lasers, Class 1M lasers, or other compliance-related matters, go to http://www.logitech.com/compliance, or call Logitech customer support. (Customer support telephone numbers are listed in the product documentation.) Battery warning! Risk of explosion or personal injury if batteries are replaced by incorrect type, mutilated, or exposed to conducting materials, liquid, fire, or heat (above 54° C or 130° F). Do not use or recharge damaged rechargeable batteries. Do not mix battery types. Dispose of spent or damaged batteries according to manufacturer instructions and local laws. Power supply warning! Caution electric shock/fire hazard! For indoor use only. Do not expose to moisture, liquid, or heat. Do not use any other power supply with your Logitech product. Device paring limitations. Some Unifying devices may be limited in the number of times they can be paired (connected) to a Unifying receiver. Although the number of parings possible may vary, the minimum number of available pairings is 45. Accessory statement. Your product is safety approved. Use only with listed ITE computers. Operating temperature. 40° C (104° F). FCC—United States This hardware device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Compliance Information Statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. Modifications to this product not authorized by Logitech could void your right to use or operate this product by the FCC. Where shielded interface cables or accessories have been provided with the product or specified additional components or accessories elsewhere defined to be used with the ins tallation of the product, they must be used in order to ensure compliance with FCC regulations. Canada (IC) Statements: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Corded products: Class B digital apparatus complies with Canadian ICES-003. Cordless (Radio Transmitter) products: Category I radio communication device, such as 2.4/5 GHz transmitters or transceive…

Text truncated - open the document above for the full version.

Logitech® Bluetooth Audio Adapter 21 RCA AUX 3 5 4 Bluetooth Logitech Bluetooth Adapter 2 x 12121212 www.logitech.com/support/xxxx 620-005962.002

Page 1 CONSTRUCTION PHOTOS OF EUT

(Fig.1) FCC ID: JNZS00144 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6

Report No.: SA140103E05 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA140103E05 MODEL NO.: S-00144 FCC ID: JNZS00144 RECEIVED: Jan. 03, 2014 TESTED: Jan. 08, 2014 ISSUED: Jan. 16, 2014 APPLICANT: LOGITECH FAR EAST LTD. ADDRESS: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA140103E05 2 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. EVALUATION RESULT ........................................................................................... 5 3. SAR TEST EXCLUSION THRESHOLDS ................................................................ 6 4. CONCLUSION ......................................................................................................... 6 Report No.: SA140103E05 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140103E05 Original release Jan. 16, 2014 Report No.: SA140103E05 4 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Bluetooth Transceiver BRAND NAME: Logitech MODEL NO.: S-00144 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: LOGITECH FAR EAST LTD. TESTED DATE: Jan. 08, 2014 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: S-00144) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Nov. 19, 2013 ( Claire Kuan, Specialist ) APPROVED BY : , DATE:Nov. 19, 2013 ( May Chen, Manager ) Report No.: SA140103E05 5 of 6 Report Format Version 5.0.0 2. EVALUATION RESULT Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR where  f(GHz) is the RF channel transmit frequency in GHz  Power and d istance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA140103E05 6 of 6 Report Format Version 5.0.0 3. SAR TEST EXCLUSION THRESHOLDS Maximum measured transmitter power: Frequency (GHz) Max. Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 2) 10-g extremity SAR test exclusion thresholds Result 2.402 ~ 2.480 8.831 5 2.736 7.5 Pass NOTE: 1. The antenna type is Wired antenna with -1.23dBi gain. 2. Calculate SAR test exclusion thresholds from condition “1”…

Text truncated - open the document above for the full version.

Report No.: RF140103E05 1 of 52 Report Format Version 5.0.0 FCC TEST REPORT REPORT NO.: RF140103E05 MODEL NO.: S-00144 FCC ID: JNZS00144 RECEIVED: Jan. 03, 2014 TESTED: Jan. 07 to 08, 2014 ISSUED: Jan. 16, 2014 APPLICANT: LOGITECH FAR EAST LTD. ADDRESS: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, Taiwan, R.O.C. TEST LOCATION (2): No.49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF140103E05 2 of 52 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................................. 4 1 CERTIFICATION ...................................................................................................................... 5 2 SUMMARY OF TEST RESULTS ............................................................................................. 6 2.1 ME ASUREMENT UNCERTAINTY .......................................................................................... 7 3 GENERAL INFORMATION ...................................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ........................................................................................ 8 3.2 DESCRIPTION OF TEST MODES .......................................................................................... 9 3.3 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL: ........................................ 10 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................................... 12 3.5 DESCRIPTION OF SUPPORT UNITS .................................................................................. 13 3.6 CONFIGURATION OF SYSTEM UNDER TEST ................................................................... 13 4 TEST PROCEDURES AND RESULTS .................................................................................. 14 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................................ 14 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................................... 14 4.1.2 TEST INSTRUMENTS ........................................................................................................... 14 4.1.3 TEST PROCEDURE .............................................................................................................. 15 4.1.4 DEVIATION FROM TEST STANDARD .................................................................................. 15 4.1.5 TEST SETUP ......................................................................................................................... 15 4.1.6 EUT OPERATING CONDITIONS........................................................................................... 16 4.1.7 TEST RESULTS ..................................................................................................................... 17 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................................ 19 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............................. 19 4.2.2 TEST INSTRUMENTS ........................................................................................................... 20 4.2.3 TEST PROCEDURES ............................................................................................................ 21 4.2.4 DEVIATION FROM TEST STANDARD .................................................................................. 21 4.2.5 TEST SETUP ......................................................................................................................... 22 4.2.6 EUT OPERATING CONDITIONS........................................................................................... 22 4.2.7 TEST RESULTS ..................................................................................................................... 23 4.3 NUMBER OF HOPPING FREQUENCY USED ..................................................................... 30 4.3.1 LIMIT OF HOPPING FREQUENCY USED ............................................................................ 30 4.3.2 TEST INSTRUMENTS ..........................................…

Text truncated - open the document above for the full version.

Report No.: 120702E04 1 of 3 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 120702E04 2 of 3 RADIATED EMISSION TEST(BELOW 1GHz) Report No.: 120702E04 3 of 3 RADIATED EMISSION TEST(ABOVE 1GHz)