JNZS00147Wireless Speaker

English Important ergonomic information. Long periods of repetitive motion using an improperly set-up workspace, incorrect body position, and poor work habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. If you feel pain, numbness, weakness, swelling, burning, cramping, or stiffness in your hands, wrists, arms, shoulders, neck, or back, see a qualified health professional. For more information, please read the Comfort Guidelines located on the Logitech® web site at http://www.logitech.com/comfort, or on the Logitech® Software CD. Do not immerse product in any liquid or expose it to heat or moisture. There are no serviceable parts. WARNING! Logitech gaming products should be used under the supervision of an adult. WARNING! CHOKING HAZARD: Logitech steering wheels have small parts and are not for children under 3 years. Battery warning! Risk of explosion or personal injury if batteries are replaced by incorrect type, mutilated, or exposed to conducting materials, liquid, fire, or heat (above 54° C or 130° F). Do not use or recharge damaged rechargeable batteries. Do not mix battery types. Dispose of spent or damaged batteries according to manufacturer instructions and local laws. Power supply warning! Caution electric shock/fire hazard! For indoor use only. Do not expose to moisture, liquid, or heat. Do not use any other power supply with your Logitech product. Device paring limitations. Some Unifying devices may be limited in the number of times they can be paired (connected) to a Unifying receiver. Although the number of parings possible may vary, the minimum number of available pairings is 45. Accessory statement. Your product is safety approved. Use only with listed ITE computers. Operating temperature. Maximum 40°C (104° F). FCC—United States This hardware device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Compliance Information Statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/ TV technician for help. Modifications to this product not authorized by Logitech could void your right to use or operate this product by the FCC. Where shielded interface cables or accessories have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations. Canada (IC) Statements: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Corded products: This Class B digital apparatus complies with Canadian ICES-003. Cordless (Radio Transmitter) products: Section A. RSS-310 (27 MHz transmitters and receivers): This Category II radio communication device complies with Industry Canada Standard RSS-310. Section B. RSS-210 (2.4 GHz transmitters or transceivers): This Category I radio communication device complies with RSS-210 of Industry Canada. Logitech compliance For additional compliance information, go to http://www.logitech.com/compliance. Logitech hardware product limited warranty Logitech warrants to the original purchaser that your Logitech hardware product shall be free from defects in material and workmanship for the period of time, identified on your product package and/or contained in the user documentation, from the date of purchase. You may also find this information by selecting your product in the Online Support section of our website at www.logitech.com/support. Except where prohibited by applicable law, this warranty is nontransferable and is limited to the original purchaser. This warranty gives you specific legal rights, and you may also have other rights that vary under local laws. Logitech’s entire liability and your exclusive remedy for any breach of warranty shall be, at Logitech’s option, (1) to repair or replace the hardware, or (2) to refund the price paid, provided that the hardware is returned to the point of purchase or such other place as Logitech may direct with a copy of the sales receipt or dated itemized receipt. Shipping and handling charges may apply, except where prohibited by applicable law. Logitech may, at its option, use new or refurbished or used parts in good working condition to repair or replace any hardware product. Any replacement hardware product will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer or for any additional period of time that may be applicable in your jurisdiction. This warranty does not cover problems or damage resulting from (1) accident, abuse, misapplicatio…

Text truncated - open the document above for the full version.

ULTIMATEEARS.COM/MEGABOOM-GUIDE ©2014 Logitech. Ultimate Ears and the Ultimate Ears logo, and other marks are owned by Logitech and may be registered. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Logitech is under license.Google Play is a trademark of Google Inc. App Store is a service mark of Apple Inc. All other trademarks are the property of their respective owners. ©2014 Logitech. Ultimate Ears and the Ultimate Ears logo, and other marks are owned by Logitech and may be registered. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Logitech is under license.Google Play is a trademark of Google Inc. App Store is a service mark of Apple Inc. All other trademarks are the property of their respective owners. UE MEGABOOM 650-019032 004 OUTSIDE4 color, CMYK finish: pp matte laminate 4 COLOR, CMYK INSIDE

Report No.: 140729E06 Page 1 CONSTRUCTION PHOTOS OF EUT Report No.: 140729E06 Page 2 Report No.: 140729E06 Page 16 Report No.: 140729E06 Page 17

(Fig.1) FCC ID: JNZS00147 FCC LABEL & Label LOCATION The label will be permanently affixed at a conspicuous location on the device.

Report No.: 140729E06 Page 3 Report No.: 140729E06 Page 4 Report No.: 140729E06 Page 5 Report No.: 140729E06 Page 6 Report No.: 140729E06 Page 7 Report No.: 140729E06 Page 8 Report No.: 140729E06 Page 9 Report No.: 140729E06 Page 10 Report No.: 140729E06 Page 11 Report No.: 140729E06 Page 12 Report No.: 140729E06 Page 13 Report No.: 140729E06 Page 14 Report No.: 140729E06 Page 15

Report No.: SA140729E06 1 of 6 Report Format Version 5.0.1 RF EXPOSURE REPORT REPORT NO.: SA140729E06 MODEL NO.: S-00147 FCC ID: JNZS00147 RECEIVED: July 29, 2014 TESTED: Aug. 08 to 13, 2014 ISSUED: Aug. 21, 2014 APPLICANT: LOGITECH FAR EAST LTD. ADDRESS: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan , R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA140729E06 2 of 6 Report Format Version 5.0.1 TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................... 3 1. CERTIFICATION ..................................................................................................... 4 2. EVALUATION RESULT ........................................................................................... 5 2.1 SAR TEST EXCLUSION THRESHOLDS ................................................................ 5 Report No.: SA140729E06 3 of 6 Report Format Version 5.0.1 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140729E06 Original release Aug. 21, 2014 Report No.: SA140729E06 5 of 6 Report Format Version 5.0.1 2. EVALUATION RESULT 2.1 SAR TEST EXCLUSION THRESHOLDS Following FCC KDB 447498 D03 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR where ÿ f(GHz) is the RF channel transmit frequency in GHz ÿ Power and distance are rounded to the nearest mW and mm before calculation ÿ The result is rou nded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA140729E06 6 of 6 Report Format Version 5.0.1 Maximum measured transmitter power: BT-EDR mode Frequency (GHz) Max. Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 2) 10-g extremity SAR test exclusion thresholds Result 2.402 ~ 2.480 8.81 5 2.77 7.5 Pass NOTE: 1. The antenna type is PCB printed antenna with 2.5dBi gain. 2. Calculate SAR test exclusion thresholds from condition “1” formulas. BT-LE mode Frequency (GHz) Max. Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 2) 10-g extremity SAR test exclusion thresholds Result 2.402 ~ 2.480 5.702 5 1.795 7.5 Pass NOTE: 1. The antenna type is PCB printed antenna with 2.5dBi gain. 2. Calculate SAR test exclusion thresholds from condition “1” formulas. --- END ---

Report No.: RF140729E06 1 of 81 Report Format Version 5.2.1 FCC TEST REPORT REPORT NO.: RF140729E06 MODEL NO.: S-00147 FCC ID: JNZS00147 RECEIVED: July 29, 2014 TESTED: Aug. 06 to 13, 2014 ISSUED: Aug. 21, 2014 APPLICANT: LOGITECH FAR EAST LTD. ADDRESS: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, Taiwan, R.O.C. TEST LOCATION (2): No.49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF140729E06 2 of 81 Report Format Version 5.2.1 TABLE OF CONTENTS RELEASE CONTROL RECORD ........................................................................................................ 5 1 CERTIFICATION ................................................................................................................ 6 2 SUMMARY OF TEST RESULTS ......................................................................................... 7 2.1 MEASUREMENT UNCERTAINTY ...................................................................................... 9 3 GENERAL INFORMATION ................................................................................................10 3.1 GENERAL DESCRIPTION OF EUT ...................................................................................10 3.2 DESCRIPTION OF TEST MODES .....................................................................................12 3.3 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL: ......................................13 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS .....................................................17 3.5 DUTY CYCLE OF TEST SIGNAL ......................................................................................18 3.6 DESCRIPTION OF SUPPORT UNITS ...............................................................................19 3.7 CONFIGURATION OF SYSTEM UNDER TEST.................................................................19 4 TEST PROCEDURES AND RESULTS (BT-EDR) ..............................................................20 4.1 CONDUCTED EMISSION MEASUREMENT .....................................................................20 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................................20 4.1.2 TEST INSTRUMENTS .......................................................................................................20 4.1.3 TEST PROCEDURES .......................................................................................................21 4.1.4 DEVIATION FROM TEST STANDARD ..............................................................................21 4.1.5 TEST SETUP ....................................................................................................................21 4.1.6 EUT OPERATING CONDITIONS .......................................................................................22 4.1.7 TEST RESULTS ................................................................................................................23 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..............................................25 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............................25 4.2.2 TEST INSTRUMENTS .......................................................................................................26 4.2.3 TEST PROCEDURES .......................................................................................................28 4.2.4 DEVIATION FROM TEST STANDARD ..............................................................................28 4.2.5 TEST SETUP ....................................................................................................................29 4.2.6 EUT OPERATING CONDITIONS .......................................................................................29 4.2.7 TEST RESULTS ................................................................................................................30 4.3 NUMBER OF HOPPING FREQUENCY USED ..................................................................37 4.3.1 LIMIT OF HOPPING FREQUENCY USED .........................................................................37 4.3.2 TEST INSTRUMENTS ........................................................................…

Text truncated - open the document above for the full version.

Report No.: 131022E08 Page 1 Reference No.: PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 131022E08 Page 2 Reference No.: RADIATED EMISSION TEST (Below 1GHz) Report No.: 131022E08 Page 3 Reference No.: RADIATED EMISSION TEST (Above 1GHz)